The index calculation in mgt_dispatcher does not use the frame type. The
4-bit right shift ignores protocol version and frame type.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver's local GetFrameSubType macro returns both frame type and
subtype.
Use the ieee80211 framework to extract the two fields. This shows more
clearly that both type and subtype are read.
Convert everything to host endianness before we use bit operations.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check only once in mgt_dispatcher that the receiver address is the local
address or the broadcast address. The second identical check can be
removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When one requests debuginfod, either via --debuginfod option, or with a
perf-config value, complain when perf is not built with it.
Signed-off-by: Martin Liška <mliska@suse.cz>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/35bae747-3951-dc3d-a66b-abf4cebcd9cb@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
reported by checkpatch:
Comparisons should place the constant on the right side of the test.
Fix these warnings.
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220414230757.19348-1-mahak_g@cs.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should access the fields of fwhdr only if the check for firmware
header existence is true. Move the affected code into the if block
that checks firmware header existence.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-9-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pr_info_once() instead of a static variable and an if statement
to log the firmware version only once.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variables fw_version, fw_subversion, fw_signature in
rtl8188e_firmware_download() are only used in one place. Use the
assigned values directly and remove the variables to make the code
shorter and cleaner.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use sizeof() instead of hardcoding the firmware header size and add
a compile time check to ensure struct rt_firmware_hdr has the correct
size.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the fields of struct rt_firmware_hdr to avoid camel case.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary comments from struct rt_firmware_hdr. While at it
align the in-line comments.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the u32 fields of struct rt_firmware_hdr to __le32 for
consistency.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix issue reported by checkpatch:
CHECK: No space is necessary after a cast
FILE: drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c:240:
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220414181622.102049-4-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix issue reported by checkpatch:
CHECK: Lines should not end with a '('
FILE: drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c:85:
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220414181622.102049-3-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Explain SND_BCM2835 config option in more detail to fix checkpatch
warning:
WARNING: please write a help paragraph that fully describes the config
symbol
FILE: drivers/staging/vc04_services/bcm2835-audio/Kconfig:2
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220414181622.102049-2-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.2.1.2 describes the encoding of the
address field within the frame header. It is made up of the DLCI address,
command/response (CR) bit and EA bit.
Use the predefined CR value instead of a plain 2 in alignment to the
remaining code and to make the encoding obvious.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220420101346.3315-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove commented out code as it is never used and if anyone accidentally
turned it on, it would be broken.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220420101346.3315-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This partially reverts commit f6f586102a. The code added by
that commit containted math overflow for 32-bit archs. In
addition, the approach used in it is unnecessarily complicated
requiring a dedicated timer just for notemt. A simpler approach
for providing UART_CAP_NOTEMT already exists (patches 1-2):
https://lore.kernel.org/linux-serial/20220411083321.9131-3-ilpo.jarvinen@linux.intel.com/T/#u
Thus, simply revert the UART_CAP_NOTEMT change for now.
There were two driver changes within the patch series adding
UART_CAP_NOTEMT taking advantage of the newly added flag.
This does not revert the driver changes and therefore also
UART_CAP_NOTEMT define has to remain. UART_CAP_NOTEMT remains
no-op until support is again added.
Fixes: f6f586102a ("serial: 8250: Handle UART without interrupt on TEMT using em485")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/5f874142-fb1f-bff7-f33-fac823e65e2e@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the peer is not informed about the initial state of the modem
control lines after a new DLCI has been opened.
Fix this by sending the initial modem control line states after DLCI open.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220420101346.3315-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit below causes the following warnings:
Documentation/driver-api/index.rst:14: WARNING: toctree contains reference to nonexisting document 'driver-api/tty'
Documentation/driver-api/tty/index.rst: WARNING: document isn't included in any toctree
This is because I omitted the "/index" part from the link. That part is
needed for directories and I was confused by the surrounding links which
are links to files. Fix it in this patch.
Fixes: b96cd8b05e ("Documentation: move tty to driver-api")
Cc: Jonathan Corbet <corbet@lwn.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220419074302.29632-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rping benchmark fails on long runs. The root cause of this failure has
been traced to a failure to compute a nonzero value of mr in rare
situations.
Fix this failure by correctly handling the computation of mr in
read_reply() in rxe_resp.c in the replay flow.
Fixes: 8a1a0be894 ("RDMA/rxe: Replace mr by rkey in responder resources")
Link: https://lore.kernel.org/r/20220418174103.3040-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: d01724dd2a ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: 94d302deae ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Line cards status tracking
When a line card is provisioned, netdevs corresponding to the ports
found on the line card are registered. User space can then perform
various logical configurations (e.g., splitting, setting MTU) on these
netdevs.
However, since the line card is not present / powered on (i.e., it is
not in 'active' state), user space cannot access the various components
found on the line card. For example, user space cannot read the
temperature of gearboxes or transceiver modules found on the line card
via hwmon / thermal. Similarly, it cannot dump the EEPROM contents of
these transceiver modules. The above is only possible when the line card
becomes active.
This patchset solves the problem by tracking the status of each line
card and invoking callbacks from interested parties when a line card
becomes active / inactive.
Patchset overview:
Patch #1 adds the infrastructure in the line cards core that allows
users to registers a set of callbacks that are invoked when a line card
becomes active / inactive. To avoid races, if a line card is already
active during registration, the got_active() callback is invoked.
Patches #2-#3 are preparations.
Patch #4 changes the port module core to register a set of callbacks
with the line cards core. See detailed description with examples in the
commit message.
Patches #5-#6 do the same with regards to thermal / hwmon support, so
that user space will be able to monitor the temperature of various
components on the line card when it becomes active.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add callback functions for line card 'hwmon' initialization and
de-initialization. Each line card is associated with the relevant
'hwmon' device, which may contain thermal attributes for the cages
and gearboxes found on this line card.
The line card 'hwmon' initialization / de-initialization APIs are to be
called when line card is set to active / inactive state by
got_active() / got_inactive() callbacks from line card state machine.
For example cage temperature for module #9 located at line card #7 will
be exposed by utility 'sensors' like:
linecard#07
front panel 009: +32.0C (crit = +70.0C, emerg = +80.0C)
And temperature for gearbox #3 located at line card #5 will be exposed
like:
linecard#05
gearbox 003: +41.0C (highest = +41.0C)
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add callback functions for line card thermal area initialization and
de-initialization. Each line card is associated with the relevant
thermal area, which may contain thermal zones for cages and gearboxes
found on this line card.
The line card thermal initialization / de-initialization APIs are to be
called when line card is set to active / inactive state by
got_active() / got_inactive() callbacks from line card state machine.
For example thermal zone for module #9 located at line card #7 will
have type:
mlxsw-lc7-module9.
And thermal zone for gearbox #2 located at line card #5 will have type:
mlxsw-lc5-gearbox2.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netdevs for ports found on line cards are registered upon provisioning.
However, user space is not allowed to access the transceiver modules
found on a line card until the line card becomes active.
Therefore, register event operations with the line card core to get
notifications whenever a line card becomes active or inactive.
When user space tries to dump the EEPROM of a transceiver module or reset
it and the corresponding line card is inactive, emit an error
message:
ethtool -m enp1s0nl7p9
netlink error: mlxsw_core: Cannot read EEPROM of module on an inactive line card
netlink error: Input/output error
When user space tries to set the power mode policy of such a transceiver,
cache the configuration and apply it when the line card becomes active. This
is consistent with other port configuration (e.g., MTU setting) that user space
is able to perform while the line card is provisioned, but inactive.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code that applies the module power mode to the device to a
separate function. This function will be invoked by the next patch to
set the power mode on transceiver modules found on a line card when the
line card becomes active.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass bus argument to mlxsw_env_init(). The purpose is to get access to
device handle, which is to be provided to error message in case of line
card activation failure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce an infrastructure allowing users to register a set
of operations which are to be called whenever a line card gets
active/inactive.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow the new i9xx DPLL FP register programming sequence
introduced in commit 62d66b2183 ("drm/i915: Fold
i9xx_set_pll_dividers() into i9xx_enable_pll()") in the
i830 "power well" code as well. Just for consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321195006.775-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
In configurations with single DRAM channel, for usecases like
4K 60 Hz, FIFO underruns are observed quite frequently. Looks
like the wm0 watermark values need to bumped up because the wm0
memory latency calculations are probably not taking the DRAM
channel's impact into account.
As per the Bspec 49325, if the ddb allocation can hold at least
one plane_blocks_per_line we should have selected method2.
Assuming that modern HW versions have enough dbuf to hold
at least one line, set the wm blocks to equivalent to blocks
per line.
v2: styling and comments changes (Ville)
v3: Updated the reviewed-by tag
v4: max_t to max and patch styling (Ville)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4321
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220417093105.729014-1-vinod.govindapillai@intel.com
Commit 428cb15d5b ("drm/i915: Clean up pre-skl primary plane registers")
introduced DISP_POS_Y and DISP_HEIGHT defines but accidentally set these
their masks to REG_GENMASK(31, 0) instead of REG_GENMASK(31, 16).
This breaks the primary display pane on at least pineview machines, fix
the mask to fix the primary display pane only showing black.
Tested on an Acer One AO532h with an Intel N450 SoC.
Fixes: 428cb15d5b ("drm/i915: Clean up pre-skl primary plane registers")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220418150936.5499-1-hdegoede@redhat.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently the driver goes over the supported opcodes list each time
->exec_op() is called and finds the suitable for the given operation.
This consumes unnecessary amount of CPU cycles because the operation is
always the same. For this reason populate dirmap hooks for the driver so
that we cache the selected operation and then simply call it on each
read/write.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20220420104350.19510-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add alsa snd_soc_pm_ops callback in ACP machine driver to support
suspend and resume operation of sound card components
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220420094442.1352717-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In asoc_simple_shutdown() the snd_soc_dai_set_sysclk() function
is called twice with input direction SND_SOC_CLOCK_IN.
Restore one call with output direction SND_SOC_CLOCK_OUT.
Fixes: 5ca2ab4598 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220412111658.11015-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series performs some cleanups to the spi-mt65xx driver, removing
all gotos, simplifying the probe function and adding kerneldoc to the
driver structures.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With additional tests with the introduction of a 'deep-buffer' PCM
device mixed with the regular low-latency path, we came up with two
improvements in the BE state machine and transitions. The short
explanation is that the BE cannot directly use the trigger commands
provided by the FE, and a translation is needed to deal with paused
states.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The INTEL_IPC4 protocol and firmware architecture will rely on
different sets of firmware binary and topology files. Some platforms
will only support INTEL_IPC4, some will support both INTEL_IPC4 and
SOF_IPC for development, and some will stay with the existing SOF_IPC.
This patchset adds new IPC definitions, and search paths for firmware
and topology files, along with means to override the default IPC type
and search paths for development. The firmware binary names are
aligned with those used by the Intel AVS driver to avoid duplicate
firmware installs, but the topology will have to differ due to driver
architecture differences.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A continuation of avs-driver initial series [1]. This chapter covers
path management and topology parsing part which was ealier path of the
main series. The two patches that represented these two subjects in the
initial series, have been split into many to allow for easier review and
discussion.
AVS topology is split into two major parts: dictionaries - found within
ASoC topology manifest - and path templates.
Dictionaries job is to reduce the total amount of memory
occupied by topology elements. Rather than having every pipeline and
module carry its own information, each refers to specific entry in
specific dictionary by provided (from topology file) indexes. In
consequence, most struct avs_tplg_xxx are made out of pointers.
Path templates are similar to path descriptions found in skylake-driver
and they describe how given path shall look like in runtime - number of
modules and pipelines that shape it and how they are laid out. A single
path template is tied either to FE or BE and thus at most to a single,
user-visible endpoint when speaking of FE.
Path is a software representation of its ADSP firmware equivalent. It's
a logical container for pipelines which are themselves containers - this
time for modules i.e. processing units.
Depending on the number of audio formats supported, each path template
may carry one or more descriptions of given path. During runtime, when
audio format is known, description matching said format is selected and
used when instantiating path on ADSP firmware side through IPCs.
When a rawmidi output stream is closed, it calls the drain at first,
then does trigger-off only when the drain returns -ERESTARTSYS as a
fallback. It implies that each driver should turn off the stream
properly after the drain. Meanwhile, USB-audio MIDI interface didn't
change the port->active flag after the drain. This may leave the
output work picking up the port that is closed right now, which
eventually leads to a use-after-free for the already released rawmidi
object.
This patch fixes the bug by properly clearing the port->active flag
after the output drain.
Reported-by: syzbot+70e777a39907d6d5fd0a@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000011555605dceaff03@google.com
Link: https://lore.kernel.org/r/20220420130247.22062-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the minItems for interrupts property as well. In the absence of
this, we get warning if interrupts are less than 13
arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb:
dma-controller@800000: interrupts: [[0, 588, 4], [0, 589, 4], [0, 590,
4], [0, 591, 4], [0, 592, 4], [0, 593, 4], [0, 594, 4], [0, 595, 4], [0,
596, 4], [0, 597, 4]] is too short
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220414064235.1182195-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For WFxT instructions used with very small delays, it is not
unlikely that the deadline is already expired by the time we
reach the WFx handling code.
Check for this condition as soon as possible, and return to the
guest immediately if we can.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419182755.601427-7-maz@kernel.org
When trapping a blocking WFIT instruction, take it into account when
computing the deadline of the background timer.
The state is tracked with a new vcpu flag, and is gated by a new
CPU capability, which isn't currently enabled.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419182755.601427-6-maz@kernel.org
