This reverts commit b1078c355d.
The single user of of_alias_get_alias_list(),
drivers/tty/serial/xilinx_uartps.c, has since been refactored and no
longer needs this function. It also contained a Smatch checker warning:
drivers/of/base.c:2038 of_alias_get_alias_list()
warn: passing negative bit value 's32min-(-2),0-s32max' to 'set_bit()'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Herring <robh@kernel.org>
As bughunter reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215709
f2fs may hang when mounting a fuzzed image, the dmesg shows as below:
__filemap_get_folio+0x3a9/0x590
pagecache_get_page+0x18/0x60
__get_meta_page+0x95/0x460 [f2fs]
get_checkpoint_version+0x2a/0x1e0 [f2fs]
validate_checkpoint+0x8e/0x2a0 [f2fs]
f2fs_get_valid_checkpoint+0xd0/0x620 [f2fs]
f2fs_fill_super+0xc01/0x1d40 [f2fs]
mount_bdev+0x18a/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
legacy_get_tree+0x28/0x50
vfs_get_tree+0x27/0xc0
path_mount+0x480/0xaa0
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is cp_pack_total_block_count field in checkpoint was fuzzed
to one, as calcuated, two cp pack block locates in the same block address,
so then read latter cp pack block, it will block on the page lock due to
the lock has already held when reading previous cp pack block, fix it by
adding sanity check for cp_pack_total_block_count.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Changed a way of showing values of them to use strings.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Make the dbuf bandwidth min cdclk calculations match the spec
more closely. Supposedly the arbiter can only guarantee an equal
share of the total bandwidth of the slice to each active plane
on that slice. So we take the max bandwidth of any of the planes
on each slice and multiply that by the number of active planes
on the slice to get a worst case estimate on how much bandwidth
we require.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The current code also forgets to call intel_atomic_lock_global_state()
when other stuff besides the final min_cdlck changes in the state.
That means we may throw away data which actually has changed, and
thus we can't be at all sure what the code ends up doing during
subsequent commits. Do the write lock properly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
intel_bw_calc_min_cdclk() is entirely pointless. All it manages to do is
somehow conflate the per-pipe min cdclk with dbuf min cdclk. There is no
(at least documented) dbuf min cdclk limit on pre-skl so let's just get
rid of all this confusion.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-6-ville.syrjala@linux.intel.com
There's really no need to maintain these total[] arrays to
track the size of each plane's ddb allocation. We just stick
the results straight into the crtc_state ddb tracking structures.
The main annoyance with all this is the mismatch between
wm_uv vs. ddb_y on pre-icl. If only the hw was consistent in
what it considers the primary source of information we could
avoid some of the uglyness. But since that is not the case
we need a bit of special casing for planar formats.
v2: Keep the ddb entry zeroed when the plane is disabled
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-5-ville.syrjala@linux.intel.com
Handle the plane relative data rate in exactly the same
way as we already handle the real data rate. Ie. pre-calculate
it during intel_plane_atomic_check_with_state(), and assign/clear
it for the Y plane as needed. This should guarantee that the
tracking is 100% consistent, and makes me have to think less
when the same apporach is used by both types of data rate.
We might even want to consider replacing the relative
data rate with the real data rate entirely, but it's not
clear if that will produce less optimal plane ddb
allocations. So for now lets keep using the current approach.
v2: Rebase due to async flip wm optimization
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-4-ville.syrjala@linux.intel.com
Split the currently combined plane data_rate into the proper
Y vs. CbCr components. This matches how we now track the
plane dbuf allocations, and thus will make the dbuf bandwidth
calculations actually produce the correct numbers for each
dbuf slice.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-3-ville.syrjala@linux.intel.com
Let's store the plane allocation in a manner which more closely
matches how the hw operates. That is, we store the packed/CbCr
ddb in one struct, and the Y ddb in another. Currently we're
storing packed/Y in one struct, CbCr in the other.
This also works pretty well for icl+ where the UV plane is
the main plane and the Y plane is subservient to it. Although
in this case we do not even use ddb_y as we do the ddb allocation
in terms of hw planes.
v2: Rebase
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-2-ville.syrjala@linux.intel.com
A few more updates in the alderlake-P voltage swing tables.
eDP HBR3 table was the same as icelake one but now it has changes for
voltage 0 and pre-emphasis 2 line.
And DP tables also had one line change in each.
Bspec: 49291
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315205122.202701-1-jose.souza@intel.com
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4aDoACgkQJNaLcl1U
h9BPKgf/XSKCt67IzrbnI9UXp1Q13C54z57e+nGr4LBSRraT/WwdXFevefC6JZDq
bYQWhigFrQyyYSyxVJYIvtywXXpMzJ1ypzHqcBGmqCufoX0zoaRwTFYg60yiYqdy
cDsX82/1bhI9Dp3RWaEKaMyaa9FI0Kr3WTA6EKdo592u0hxj4UcK51r7qsp1JpsR
tQWGMYqqwtajhamFgrIlKiJDDVnv2qEhrWdho5W/FPAby+fsJ6VJBMhwEx/F7cXu
Mjfa0k2MoMAlNX9DxtIHweVECaN32HJsytrbgUAdYnBoGaZNkXwLwvyp9RIeDAMP
NZ+w3lwFLw1N8S2ho6kqtDpO+tJU0Q==
=Y6/E
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.18
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
Convert stackinit unit tests to KUnit, for better integration
into the kernel self test framework. Includes a rename of
test_stackinit.c to stackinit_kunit.c, and CONFIG_TEST_STACKINIT to
CONFIG_STACKINIT_KUNIT_TEST.
Adjust expected test results based on which stack initialization method
was chosen:
$ CMD="./tools/testing/kunit/kunit.py run stackinit --raw_output \
--arch=x86_64 --kconfig_add"
$ $CMD | grep stackinit:
# stackinit: pass:36 fail:0 skip:29 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_USER=y | grep stackinit:
# stackinit: pass:37 fail:0 skip:28 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF=y | grep stackinit:
# stackinit: pass:55 fail:0 skip:10 total:65
$ $CMD CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y | grep stackinit:
# stackinit: pass:62 fail:0 skip:3 total:65
$ $CMD CONFIG_INIT_STACK_ALL_PATTERN=y --make_option LLVM=1 | grep stackinit:
# stackinit: pass:60 fail:0 skip:5 total:65
$ $CMD CONFIG_INIT_STACK_ALL_ZERO=y --make_option LLVM=1 | grep stackinit:
# stackinit: pass:60 fail:0 skip:5 total:65
Temporarily remove the userspace-build mode, which will be restored in a
later patch.
Expand the size of the pre-case switch variable so it doesn't get
accidentally cleared.
Cc: David Gow <davidgow@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
v1: https://lore.kernel.org/lkml/20220224055145.1853657-1-keescook@chromium.org
v2:
- split "userspace KUnit stub" into separate header and patch (Daniel)
- Improve commit log and comments (David)
- Provide mapping of expected XFAIL tests to CONFIGs (David)
Introduce a new mount option -- trunkdiscovery,notrunkdiscovery -- to
toggle whether or not the client will engage in actively discovery
of trunking locations.
v2 make notrunkdiscovery default
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 1976b2b314 ("NFSv4.1 query for fs_location attr on a new file system")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The imx-mipi-csis driver is specific to NXP platforms. Restrict it to
those by default, and enable compilation with COMPILE_TEST to keep a
wide test coverage.
Link: https://lore.kernel.org/linux-media/20220318203735.5923-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jakub Kicinski says:
====================
devlink: hold the instance lock in eswitch callbacks
Series number 2 in the effort to hold the devlink instance lock
in call driver callbacks. We have the following drivers using
this API:
- bnxt, nfp, netdevsim - their own locking is removed / simplified
by this series; all of them needed a lock to protect from changes
to the number of VFs while switching modes, now the VF config bus
callback takes the devlink instance lock via devl_lock();
- ice - appears not to allow changing modes while SR-IOV enabled,
so nothing to do there;
- liquidio - does not contain any locking;
- octeontx2/af - is very special but at least doesn't have locking
so doesn't get in the way either;
- mlx5 has a wealth of locks - I chickened out and dropped the lock
in the callbacks so that I can leave the driver be, for now.
The last one is obviously not ideal, but I would prefer to transition
the API already as it make take longer.
v2: use a wrapper in mlx5 and extend the comment
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the devlink core hold the instance lock during eswitch_mode
callbacks. Cheat in case of mlx5 (see the cover letter).
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to the previous commit, use the devlink instance
lock and let it replace the vfs_lock.
nsim_esw_legacy_enable() was locked by both port lock and
vfs lock so one set of lock/unlocks goes away.
netdevsim's .eswitch_mode_set callback is now ready for
the callback to take the instance lock.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Take advantage of the devlink instance lock for protecting
the port list. This will simplify locking even more once
all devlink callbacks hold the instance lock.
We need to add locking in nsim_dev_port_add_all() which used
to assume higher layer protection when accessing the list.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'll need an explicitly locked rate node API for netdevsim
to switch eswitch mode setting to locked.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In prep for .eswitch_mode_set being called with the devlink instance
lock held use that lock explicitly instead of creating a local mutex
just for the sriov reconfig.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.
On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2cd80dbd35 ("drm/vmwgfx: Add basic support for SVGA3")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org
The kms code wasn't validating the modifiers and was letting through
unsupported formats. rgb8 was never properly supported and has no
matching svga screen target format so remove it.
This fixes format/modifier failures in kms_addfb_basic from IGT.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-4-zack@kde.org
Writes to SVGA_REG_CURSOR_MOBID did not wait for the buffers to be fully
populated. This sometimes results in the device not being aware of
the buffer when the cursor mob register was written.
Properly wait for the buffer to be fully populated before setting it
as a cursor mob.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 485d98d472 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-3-zack@kde.org
vmw_move assumed that buffers to be moved would always be
vmw_buffer_object's but after introduction of new placement for mob
pages that's no longer the case.
The resulting invalid read didn't have any practical consequences
because the memory isn't used unless the object actually is a
vmw_buffer_object.
Fix it by moving the cast to the spot where the results are used.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: f6be23264b ("drm/vmwgfx: Introduce a new placement for MOB page tables")
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-2-zack@kde.org
If there is no btf_id or frozen, it will not show the pids, but the pids don't
depend on any one of them.
Below is the result after this change:
$ ./bpftool map show
2: lpm_trie flags 0x1
key 8B value 8B max_entries 1 memlock 4096B
pids systemd(1)
3: lpm_trie flags 0x1
key 20B value 8B max_entries 1 memlock 4096B
pids systemd(1)
While before this change, the 'pids systemd(1)' can't be displayed.
Fixes: 9330986c03 ("bpf: Add bloom filter map implementation")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220320060815.7716-1-laoar.shao@gmail.com
Andrii reported that backtraces from kprobe_multi program attached
as return probes are not complete and showing just initial entry [1].
It's caused by changing registers to have original function ip address
as instruction pointer even for return probe, which will screw backtrace
from return probe.
This change keeps registers intact and store original entry ip and
link address on the stack in bpf_kprobe_multi_run_ctx struct, where
bpf_get_func_ip and bpf_get_attach_cookie helpers for kprobe_multi
programs can find it.
[1] https://lore.kernel.org/bpf/CAEf4BzZDDqK24rSKwXNp7XL3ErGD4bZa1M6c_c4EvDSt3jrZcg@mail.gmail.com/T/#m8d1301c0ea0892ddf9dc6fba57a57b8cf11b8c51
Fixes: ca74823c6e ("bpf: Add cookie support to programs attached with kprobe multi link")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220321070113.1449167-3-jolsa@kernel.org
This reverts commit 97ee4d20ee.
Following change is adding more complexity to bpf_get_func_ip
helper for kprobe_multi programs, which can't be inlined easily.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321070113.1449167-2-jolsa@kernel.org
Replace offsetof(hdr_len) + sizeof(hdr_len) with offsetofend(hdr_len) to
simplify the check for correctness of btf_data_size in btf_parse_hdr()
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220320075240.1001728-1-ytcoode@gmail.com
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes: 6bdd533cee ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com
Instead of using array_size, use a function that takes care of the
multiplication. While at it, switch to kvcalloc since this allocation
should not be very large.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_DISABLE_QUIRKS is irrevocably broken. The capability does not
advertise the set of quirks which may be disabled to userspace, so it is
impossible to predict the behavior of KVM. Worse yet,
KVM_CAP_DISABLE_QUIRKS will tolerate any value for cap->args[0], meaning
it fails to reject attempts to set invalid quirk bits.
The only valid workaround for the quirky quirks API is to add a new CAP.
Actually advertise the set of quirks that can be disabled to userspace
so it can predict KVM's behavior. Reject values for cap->args[0] that
contain invalid bits.
Finally, add documentation for the new capability and describe the
existing quirks.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220301060351.442881-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Non constant TSC is a nightmare on bare metal already, but with
virtualization it becomes a complete disaster because the workarounds
are horrible latency wise. That's also a preliminary for running RT in
a guest on top of a RT host.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Message-Id: <Yh5eJSG19S2sjZfy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guests X86_BUG_NULL_SEG if and only if the host has them. Use the info
from static_cpu_has_bug to form the 0x80000021 CPUID leaf that was
defined for Zen3. Userspace can then set the bit even on older CPUs
that do not have the bug, such as Zen2.
Do the same for X86_FEATURE_LFENCE_RDTSC as well, since various processors
have had very different ways of detecting it and not all of them are
available to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf 0x80000021 defines some features (or lack of bugs) of AMD
processors. Expose the ones that make sense via KVM_GET_SUPPORTED_CPUID.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_X86_OP_OPTIONAL_RET0 can only be used with 32-bit return values on 32-bit
systems, because unsigned long is only 32-bits wide there and 64-bit values
are returned in edx:eax.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tong Zhang says:
====================
fix typos: "to short" -> "too short"
doing some code review and I found out there are a couple of places
where "too short" is misspelled as "to short".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
"packet length to short" -> "packet length too short"
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
