EOPNOTSUPP is a possible return value when branch stacks are requested
but they aren't enabled in the kernel or hardware. It's also returned if
they aren't supported on the specific event type. The currently printed
error message about sampling/overflow-interrupts is not correct in this
case.
Add a check for branch stacks before sample_period is checked because
sample_period is also set (to the default value) when using branch
stacks.
Before this change (when branch stacks aren't supported):
perf record -j any
Error:
cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
After this change:
perf record -j any
Error:
cycles: PMU Hardware or event type doesn't support branch stack sampling.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220307171917.2555829-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert Tegra timer binding into yaml format.
This commit also merge 3 text bindings with almost
identical content (differens in number of registers).
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20220303233307.61753-1-david@ixit.cz
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When building this driver for an architecture other than ARCH=arm:
drivers/clocksource/timer-imx-tpm.c:78:20: error: unused function 'tpm_read_sched_clock' [-Werror,-Wunused-function]
static u64 notrace tpm_read_sched_clock(void)
^
1 error generated.
Move the function definition under the existing CONFIG_ARM section so
there is no more warning.
Fixes: 10720e120e ("clocksource/drivers/imx-tpm: Exclude sched clock for ARM64")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220303184212.2356245-1-nathan@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
With FEAT_ECV and the 1GHz counter, it is pretty likely that the
event stream divider doesn't fit in the field that holds the
divider value (we only have 4 bits to describe counter bits [15:0]
Thankfully, FEAT_ECV also provides a scaling mechanism to switch
the field to cover counter bits [23:8] instead.
Enable this on arm64 when ECV is available (32bit doesn't have
any detection infrastructure and is unlikely to be run on an
ARMv8.6 system anyway).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220203170502.2694422-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Variable _name_ hold mct_tick number per cpu and it is currently
limited to 10. Which restrict the scalability of the MCT driver for
the SoC which has more local timers interrupts (>= 12).
Increase the length of it to make mct_tick printed correctly for
each local timer interrupts per CPU.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220221174547.26176-3-alim.akhtar@samsung.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Bump-up maximum number of MCT IRQ to match the binding
documentation. This make driver scalable for SoC which
has more than 12 timer irqs, like recently added FSD SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220221174547.26176-2-alim.akhtar@samsung.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
MCT driver define an enum which list global and local timer's
irq index. Most of them are not used but MCT_G0_IRQ and
MCT_L0_IRQ and these two are at a fixed offset/index.
Get rid of this enum and use a #define for the used irq index.
No functional changes expected.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220221174547.26176-1-alim.akhtar@samsung.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The driver statically defines maximum number of interrupts it can
handle, however it does not respect that limit when configuring them.
When provided with a DTS with more interrupts than assumed, the driver
will overwrite static array mct_irqs leading to silent memory
corruption.
Validate the interrupts coming from DTS to avoid this. This does not
change the fact that such DTS might not boot at all, because it is
simply incompatible, however at least some warning will be printed.
Fixes: 36ba5d527e ("ARM: EXYNOS: add device tree support for MCT controller driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220220103815.135380-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The mitigations for Spectre-BHB are only applied when an exception is
taken from user-space. The mitigation status is reported via the spectre_v2
sysfs vulnerabilities file.
When unprivileged eBPF is enabled the mitigation in the exception vectors
can be avoided by an eBPF program.
When unprivileged eBPF is enabled, print a warning and report vulnerable
via the sysfs vulnerabilities file.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The mdev attribute "name" is required by some middle software, e.g.
KubeVirt, an open source SW that manages VM on Kubernetes cluster uses
the mdev sysfs directory/file structure to discover mediated device in
nodes in the cluster.
v2:
- Fix the missing defination in gvt_type_attrs. (Zhenyu)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hui Chun Ong <hui.chun.ong@intel.com>
Cc: Terrence Xu <terrence.xu@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.wang.linux@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220222150532.9090-1-zhi.a.wang@intel.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This allows more concise code, and VERIFY_OCTAL_PERMISSIONS() can help
validate any future change.
Signed-off-by: Lianjie Zhang <zhanglianjie@uniontech.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220306073818.15089-1-zhanglianjie@uniontech.com
The root of the problem is that we are selecting symbols that have
dependencies. This can cause random configurations that can fail.
The cleanest solution is to avoid using select.
This driver uses interfaces from the OMAP_GPMC driver so we have to
depend on it instead.
Fixes: 4cd335dae3 ("mtd: rawnand: omap2: Prevent invalid configuration and build error")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/linux-mtd/20220219193600.24892-1-rogerq@kernel.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRSrcquik9wuZrNjXJrQl33mxwedgUCYiYxWwAKCRBrQl33mxwe
dpysAQCPLpcMmMgKZvuk/QYCtibW/eBQiB0lbXdwSUtJUK6otQD/Rbh5zTzyQcn0
XZRIBnjFkLhPOHaqjzvNnqllqWbPBQ8=
=02L2
-----END PGP SIGNATURE-----
Merge tag 'br-v5.18s' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v5.18s' of git://linuxtv.org/hverkuil/media_tree:
ivtv: fix incorrect device_caps for ivtvfb
media: rcar-csi2: Drop comma after SoC match table sentinel
media: camss: Replace hard coded value with parameter
media: saa7134: fix incorrect use to determine if list is empty
media: MAINTAINERS: update rksip1 maintainers info
MAINTAINERS: update media vimc driver maintainers
media: i2c: max2175: Use rbtree rather than flat register cache
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The VIDIOC_G_FBUF and related overlay ioctls no longer worked (-ENOTTY was
returned).
The root cause was the introduction of the caps field in ivtv-driver.h.
While loading the ivtvfb module would update the video_device device_caps
field with V4L2_CAP_VIDEO_OUTPUT_OVERLAY it would not update that caps
field, and that's what the overlay ioctls would look at.
It's a bad idea to keep information in two places, so drop the caps field
and only use vdev.device_caps.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Fixes: 2161536516 (media: media/pci: set device_caps in struct video_device)
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Kernel test robot reported below warning ->
drivers/media/platform/qcom/camss/camss-csid-gen2.c:407:3:
warning: Value stored to 'val' is never read
[clang-analyzer-deadcode.DeadStores]
Replace hard coded value with val.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'dev' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.
Instead of checking the pointer it should be checked if
the list is empty.
Fixes: 79dd0c69f0 ("V4L: 925: saa7134 alsa is now a standalone module")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Due to changes in maintainers info/position
Signed-off-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Based on the dicussion with Hans Verkuil and others in the thread below,
vimc is need of a maintainer. I will start maintaining the driver with
help from Kieran Bingham as the reviewer.
Link: https://lore.kernel.org/linux-media/5d5dee88-9dbf-e4d0-4a91-11ff4ecd82ea@xs4all.nl/
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Helen Koike <helen@koikeco.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The max2175 uses a flat register cache but supplies only a single default
value and has many volatile registers. This is a poor fit for a flat cache
since the cache will assume a default of zero for any register not yet
written which can lead to bugs for example when regmap_update_bits()
suppresses a noop write. A rbtree cache is a much better fit, this will
only cache default values and values that have been written to the device
with any reads of uncached values going to the hardware. Convert the driver
to use a rbtree cache.
Since the device is controlled via I2C the cost of manging the rbtree
should be immaterial compared to the cost of accessing the device.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add V4L2 driver entry for the amphion vpu encoder/decoder.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This part implements the malone decoder rpc interface.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This part implements the windsor encoder rpc interface.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This consists of video decoder implementation plus decoder controls.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This consists of video encoder implementation plus encoder controls.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
vpu_v4l2.c implements the v4l2 m2m driver methods.
vpu_helpers.c implements the common helper functions
vpu_color.c converts the v4l2 colorspace with
the VUI parameters that specified by ITU-T | ISO/IEC
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
driver use mailbox to communicate with vpu core.
and there are a command buffer and a message buffer.
driver will write commands to the command buffer,
then trigger a vpu core interrupt
vpu core will write messages to the message buffer,
then trigger a cpu interrupt.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The vpu supports encoder and decoder.
it needs vpu core to handle it.
core will run either encoder or decoder firmware.
This driver is for support the vpu core.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The amphion vpu codec ip contains encoder and decoder.
Windsor is the encoder, it supports to encode H.264.
Malone is the decoder, it features a powerful
video processing unit able to decode many formats,
such as H.264, HEVC, and other formats.
This Driver is for this IP that is based on the v4l2 mem2mem framework.
Supported SoCs are: IMX8QXP, IMX8QM
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
nv12m_8l128 is 8-bit tiled nv12 format used by amphion decoder.
nv12m_10be_8l128 is 10-bit tiled format used by amphion decoder.
The tile size is 8x128
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add devicetree binding documentation for amphion
Video Processing Unit IP presents on NXP i.MX8Q
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the error code to -ENOMEM if drm_random_order() fails.
Fixes: e6ff5ef811 ("drm/selftests: add drm buddy smoke testcase")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220307125458.GA16710@kili
The "adata->i2s_irq" variable is unsigned so the error handling
will not work.
Fixes: 87d71a1287 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131256.GA28739@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJMEABEIADsWIQRTrFil9ZSGNsBKG/gUHfpUoeyN6gUCYiHBnh0cc2FrYXJpLmFp
bHVzQGxpbnV4LmludGVsLmNvbQAKCRAUHfpUoeyN6jvwAQCXadtz1Ak1oRm+nWih
dO6rM2yonXUgZHyCwT3DRhdUHwD/Xs51RkSsrISWAuSqClDe0MSfREQ+TQKGtU6+
zQkHU1Q=
=4R9H
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-2.6-signed' of git://linuxtv.org/sailus/media_tree into media_stage
Even yet more V4L2 patches for 5.18
* tag 'for-5.18-2.6-signed' of git://linuxtv.org/sailus/media_tree:
media: i2c: Fix pixel array positions in ov8865
media: adv7183: Convert to GPIO descriptors
media: m5mols: Convert to use GPIO descriptors
media: noon010p30: Convert to use GPIO descriptors
media: mt9m111: Drop unused include
media: adv7511: Drop unused include
media: i2c: isl7998x: Add driver for Intersil ISL7998x
media: dt-bindings: Add Intersil ISL79987 DT bindings
media: media-entity: Clarify media_entity_cleanup() usage
media: i2c: imx274: Drop surplus includes
media: i2c: ccs: Drop unused include
v4l: fwnode: Remove now-redundant loop from v4l2_fwnode_parse_reference()
v4l: fwnode: Drop redunant -ENODATA check in property reference parsing
media: media-entity: Simplify media_pipeline_start()
media: media-entity: Add media_pad_is_streaming() helper function
media: Add a driver for the og01a1b camera sensor
media: i2c: ov5648: Fix lockdep error
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.
On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.
This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.
Fix by copying pages coming from the user address space to new pipe
buffers.
Reported-by: Jann Horn <jannh@google.com>
Fixes: c3021629a0 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Calling udelay for than 1000us does not always yield the correct
results.
Cc: stable@vger.kernel.org
Reported-by: Михаил <vrserver1@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There is no hardware which can filter input on the duty cycle, so no
driver implements this. On top of that, LIRC_CAN_SET_REC_DUTY_CYCLE
has the same value as LIRC_CAN_MEASURE_CARRIER (0x02000000).
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRSrcquik9wuZrNjXJrQl33mxwedgUCYhSuNQAKCRBrQl33mxwe
dqOzAQCYc0iOPhTap9q7thsa5KYbyOU1A45u2jeETEz80La8mwEA4GjXUWMi2Scs
e0BMW+hej/kjPnFHNqz4UBBXoDG0Egg=
=TDr2
-----END PGP SIGNATURE-----
Merge tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree: (39 commits)
media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos
media: meson-ir-tx: remove incorrect doc comment
media: vivid: use time_is_after_jiffies() instead of open coding it
media: wl128x: use time_is_before_jiffies() instead of open coding it
media: tda8083: use time_is_after_jiffies() instead of open coding it
media: stv0299: use time_is_before_jiffies() instead of open coding it
media: si21xx: use time_is_before_jiffies() instead of open coding it
media: cedrus: h264: Fix neighbour info buffer size
media: cx88-mpeg: clear interrupt status register before streaming video
media: cedrus: H265: Fix neighbour info buffer size
media: fsl-viu: use GFP_KERNEL
media: cx18: use GFP_KERNEL
drivers: meson: vdec: add VP9 support to GXM
stkwebcam: add new Asus laptop to upside_down table
media: imx-jpeg: fix a bug of accessing array out of bounds
media: sun6i-csi: fix colorspace in sun6i_video_try_fmt()
media: usb: go7007: s2250-board: fix leak in probe()
media: cedrus: Add watchdog for job completion
pixfmt-yuv-planar.rst: fix typo: 'Cr, Cr' -> 'Cr, Cb'
media: imx-jpeg: Remove unnecessary print function dev_err()
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The TODO of tegra-vde driver has been completed, driver now supports
V4L2 stateless video decoding API. Relocate driver to drivers/media.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
BSEV DMA timeouts if VDE is downclocked by x10. Bump the timeout to allow
DMA to complete. We don't support freq scaling yet, this is just a minor
improvement which may become useful sometime later.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The legacy UAPI became unnecessary with the V4L stateless decoder API
support addition to the Tegra decoder driver. Remove legacy UAPI support.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Expose Tegra video decoder as a generic V4L M2M stateless video decoder.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
