Commit graph

1,105,074 commits

Author SHA1 Message Date
Ralph Siemsen
9a62657739 nvmem: eeprom: at25: fix FRAM byte_len
Commit fd307a4ad3 ("nvmem: prepare basics for FRAM support") added
support for FRAM devices such as the Cypress FM25V. During testing, it
was found that the FRAM detects properly, however reads and writes fail.
Upon further investigation, two problem were found in at25_probe() routine.

1) In the case of an FRAM device without platform data, eg.
       fram == true && spi->dev.platform_data == NULL
the stack local variable "struct spi_eeprom chip" is not initialized
fully, prior to being copied into at25->chip. The chip.flags field in
particular can cause problems.

2) The byte_len of FRAM is computed from its ID register, and is stored
into the stack local "struct spi_eeprom chip" structure. This happens
after the same structure has been copied into at25->chip. As a result,
at25->chip.byte_len does not contain the correct length of the device.
In turn this can cause checks at beginning of at25_ee_read() to fail
(or equally, it could allow reads beyond the end of the device length).

Fix both of these issues by eliminating the on-stack struct spi_eeprom.
Instead use the one inside at25_data structure, which starts of zeroed.

Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Link: https://lore.kernel.org/r/20211108181627.645638-1-ralph.siemsen@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 14:19:54 +01:00
Jeya R
3a1bf591e9 misc: fastrpc: fix improper packet size calculation
The buffer list is sorted and this is not being considered while
calculating packet size. This would lead to improper copy length
calculation for non-dmaheap buffers which would eventually cause
sending improper buffers to DSP.

Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Link: https://lore.kernel.org/r/1637771481-4299-1-git-send-email-jeyr@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 14:17:52 +01:00
Srinivas Kandagatla
f12972018b MAINTAINERS: add maintainer for Qualcomm FastRPC driver
For some reason I forgot to add myself as maintainer when we
upstreamed FastRPC patches.

Add myself and Amol from Qualcomm as maintainers for Qualcomm FastRPC driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211124142325.27108-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 14:17:50 +01:00
Al Cooper
9cabe26e65 serial: 8250_bcm7271: UART errors after resuming from S2
There is a small window in time during resume where the hardware
flow control signal RTS can be asserted (which allows a sender to
resume sending data to the UART) but the baud rate has not yet
been restored. This will cause corrupted data and FRAMING, OVERRUN
and BREAK errors. This is happening because the MCTRL register is
shadowed in uart_port struct and is later used during resume to set
the MCTRL register during both serial8250_do_startup() and
uart_resume_port(). Unfortunately, serial8250_do_startup()
happens before the UART baud rate is restored. The fix is to clear
the shadowed mctrl value at the end of suspend and restore it at the
end of resume.

Fixes: 41a469482d ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 14:14:49 +01:00
Lino Sanfilippo
d1180405c7 serial: amba-pl011: do not request memory region twice
With commit 3873e2d7f6 ("drivers: PL011: refactor pl011_probe()") the
function devm_ioremap() called from pl011_setup_port() was replaced with
devm_ioremap_resource(). Since this function not only remaps but also
requests the ports io memory region it now collides with the .config_port()
callback which requests the same region at uart port registration.

Since devm_ioremap_resource() already claims the memory successfully, the
request in .config_port() fails.

Later at uart port deregistration the attempt to release the unclaimed
memory also fails. The failure results in a “Trying to free nonexistent
resource" warning.

Fix these issues by removing the callbacks that implement the redundant
memory allocation/release. Also make sure that changing the drivers io
memory base address via TIOCSSERIAL is not allowed any more.

Fixes: 3873e2d7f6 ("drivers: PL011: refactor pl011_probe()")
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20211129174238.8333-1-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 14:13:48 +01:00
Lizhi Hou
3672fb6515 tty: serial: uartlite: allow 64 bit address
The base address of uartlite registers could be 64 bit address which is from
device resource. When ulite_probe() calls ulite_assign(), this 64 bit
address is casted to 32-bit. The fix is to replace "u32" type with
"phys_addr_t" type for the base address in ulite_assign() argument list.

Fixes: 8fa7b61006 ("[POWERPC] Uartlite: Separate the bus binding from the driver proper")
Signed-off-by: Lizhi Hou <lizhi.hou@xilinx.com>
Link: https://lore.kernel.org/r/20211129202302.1319033-1-lizhi.hou@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 14:12:56 +01:00
Christian König
e485382ea7 drm/ttm: fix ttm_bo_swapout
Commit 7120a447c7 ("drm/ttm: Double check mem_type of BO while eviction")
made ttm_bo_evict_swapout_allowable() function actually check the
placement, but we always used a dummy placement in ttm_bo_swapout.

Fix this by using the real placement instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 7120a447c7 ("drm/ttm: Double check mem_type of BO while eviction")
Reviewed-by: Pan, Xinhui <Xinhui.Pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202103828.44573-1-christian.koenig@amd.com
2021-12-03 14:01:46 +01:00
Sherry Sun
ffccc78a58 tty: serial: fsl_lpuart: add timeout for wait_event_interruptible in .shutdown()
Use wait_event_interruptible in lpuart_dma_shutdown isn't a reasonable
behavior, since it may cause the system hang here if the condition
!sport->dma_tx_in_progress never to be true in some corner case, such as
when enable the flow control, the dma tx request may never be completed
due to the peer's CTS setting when run .shutdown().

So here change to use wait_event_interruptible_timeout instead of
wait_event_interruptible, the tx dma will be forcibly terminated if the
tx dma request cannot be completed within 300ms.
Considering the worst tx dma case is to have a 4K bytes tx buffer, which
would require about 300ms to complete when the baudrate is 115200.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20211203030441.22873-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 14:00:05 +01:00
Zhou Qingyang
37307f7020 usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring
and there is a dereference of it in cdnsp_endpoint_init(), which could
lead to a NULL pointer dereference on failure of cdnsp_ring_alloc().

Fix this bug by adding a check of pep->ring.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@vger.kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:57:45 +01:00
Frank Li
387c2b6ba1 usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
This issue was found at android12 MTP.
1. MTP submit many out urb request.
2. Cancel left requests (>20) when enough data get from host
3. Send ACK by IN endpoint.
4. MTP submit new out urb request.
5. 4's urb never complete.

TRACE LOG:

MtpServer-2157    [000] d..3  1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0
MtpServer-2157    [000] d..3  1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0
MtpServer-2157    [000] d..3  1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0
MtpServer-2157    [000] d..3  1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0
	....
MtpServer-2157    [000] d..1  1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157    [000] d..2  1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157    [000] d..2  1293.630445: cdns3_wa1: WA1: ep1out set guard
MtpServer-2157    [000] d..2  1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit
MtpServer-2157    [000] d..2  1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0
MtpServer-2157    [000] d..2  1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414
	....
irq/241-5b13000-2154    [000] d..1  1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0
irq/241-5b13000-2154    [000] d..1  1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0
irq/241-5b13000-2154    [000] d..1  1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184

Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong.

The TRB link is below when irq happen.

	DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START  DMA(EP_TRADDR).

Original code check LINK TRB, but DEQ just move one step.

	LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START  DMA(EP_TRADDR).

This patch skip all LINK TRB and sync DEQ to trb's start.

	LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START  DMA(EP_TRADDR).

Acked-by: Peter Chen <peter.chen@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:57:22 +01:00
Badhri Jagan Sridharan
fbcd13df1e usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."

This change makes TCPM to wait in SNK_DEBOUNCED state until
CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously,
TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON.
This causes TCPM to loop continuously when connected to a
faulty power source that does not present vbus. Waiting in
SNK_DEBOUNCED also ensures that TCPM is adherant to
"4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements.

[ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
[ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6169.931296] disable vbus discharge ret:0
[ 6169.931301] Setting usb_comm capable false
[ 6169.932783] Setting voltage/current limit 0 mV 0 mA
[ 6169.932802] polarity 0
[ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0
[ 6169.936689] cc:=0
[ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 6170.036896] Start toggling
[ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6170.693304] disable vbus discharge ret:0
[ 6170.693308] Setting usb_comm capable false
[ 6170.695193] Setting voltage/current limit 0 mV 0 mA
[ 6170.695210] polarity 0
[ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0
[ 6170.701896] cc:=0
[ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]

Fixes: f0690a25a1 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:57:10 +01:00
Ole Ernst
d2a004037c USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71

Disable LPM to resolve the issue.

Signed-off-by: Ole Ernst <olebowle@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:56:54 +01:00
Mathias Nyman
09f736aa95 xhci: Fix commad ring abort, write all 64 bits to CRCR register.
Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.

The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.

Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.

The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.

Fixes: ff0e50d356 ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:56:33 +01:00
Dongliang Mu
e1c72d907f usb: bdc: fix error handling code in bdc_resume
If bdc_reinit in bdc_resume fails, it forgets to deallocate the
bdc->clk.

Fix this by adding clk_disable_unprepare(bdc->clk).

Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20211130143354.1820111-1-mudongliangabcd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:50:43 +01:00
Neal Liu
554abfe2ea usb: uhci: add aspeed ast2600 uhci support
Enable ast2600 uhci quirks.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20211126100021.2331024-1-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:47:52 +01:00
Nishanth Menon
a172c86931 arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
A72 Cluster (chapter 1.3.1 [1]) has 48KB Icache, 32KB Dcache and 1MB L2 Cache
 - ICache is 3-way set-associative
 - Dcache is 2-way set-associative
 - Line size are 64bytes

32KB (Dcache)/64 (fixed line length of 64 bytes) = 512 ways
512 ways / 2 (Dcache is 2-way per set) = 256 sets.

So, correct the d-cache-sets info.

[1] https://www.ti.com/lit/pdf/spruiu1

Fixes: d361ed8845 ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211113042640.30955-1-nm@ti.com
2021-12-03 17:21:36 +05:30
Nishanth Menon
e9ba3a5bc6 arm64: dts: ti: k3-j721e: Fix the L2 cache sets
A72's L2 cache[1] on J721e[2] is 1MB. A72's L2 is fixed line length of
64 bytes and 16-way set-associative cache structure.

1MB of L2 / 64 (line length) = 16384 ways
16384 ways / 16 = 1024 sets

Fix the l2 cache-sets.

[1] https://developer.arm.com/documentation/100095/0003/Level-2-Memory-System/About-the-L2-memory-system
[2] http://www.ti.com/lit/pdf/spruil1

Fixes: 2d87061e70 ("arm64: dts: ti: Add Support for J721E SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211113043639.4413-1-nm@ti.com
2021-12-03 17:19:55 +05:30
Nishanth Menon
d0c826106f arm64: dts: ti: k3-j7200: Fix the L2 cache sets
A72's L2 cache[1] on J7200[2] is 1MB. A72's L2 is fixed line length of
64 bytes and 16-way set-associative cache structure.

1MB of L2 / 64 (line length) = 16384 ways
16384 ways / 16 = 1024 sets

Fix the l2 cache-sets.

[1] https://developer.arm.com/documentation/100095/0003/Level-2-Memory-System/About-the-L2-memory-system
[2] https://www.ti.com/lit/pdf/spruiu1

Fixes: d361ed8845 ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211113043638.4358-1-nm@ti.com
2021-12-03 17:19:04 +05:30
Nishanth Menon
a27a93bf70 arm64: dts: ti: k3-am642: Fix the L2 cache sets
A53's L2 cache[1] on AM642[2] is 256KB. A53's L2 is fixed line length
of 64 bytes and 16-way set-associative cache structure.

256KB of L2 / 64 (line length) = 4096 ways
4096 ways / 16 = 256 sets

Fix the l2 cache-sets.

[1] https://developer.arm.com/documentation/ddi0500/j/Level-2-Memory-System/About-the-L2-memory-system?lang=en
[2] https://www.ti.com/lit/pdf/spruim2

Fixes: 8abae9389b ("arm64: dts: ti: Add support for AM642 SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211113043635.4296-1-nm@ti.com
2021-12-03 17:18:37 +05:30
Li Zhijian
db925bca33 selftests/tc-testing: Fix cannot create /sys/bus/netdevsim/new_device: Directory nonexistent
Install netdevsim to provide /sys/bus/netdevsim/new_device interface.

It helps to fix:
 # ok 97 9a7d - Change ETS strict band without quantum # skipped - skipped - previous setup failed 11 ce7d
 #
 #
 # -----> prepare stage *** Could not execute: "echo "1 1 4" > /sys/bus/netdevsim/new_device"
 #
 # -----> prepare stage *** Error message: "/bin/sh: 1: cannot create /sys/bus/netdevsim/new_device: Directory nonexistent
 # "
 #
 # -----> prepare stage *** Aborting test run.
 #
 #
 # <_io.BufferedReader name=5> *** stdout ***
 #

Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:46:41 +00:00
Li Zhijian
a8c9505c53 selftests/tc-testing: add missing config
qdiscs/fq_pie requires CONFIG_NET_SCH_FQ_PIE, otherwise tc will fail
to create a fq_pie qdisc.

It fixes following issue:
 # not ok 57 83be - Create FQ-PIE with invalid number of flows
 #       Command exited with 2, expected 0
 # Error: Specified qdisc not found.

Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:46:41 +00:00
Li Zhijian
96f3896780 selftests/tc-testing: add exit code
Mark the summary result as FAIL to prevent from confusing the selftest
framework if some of them are failed.

Previously, the selftest framework always treats it as *ok* even though
some of them are failed actually. That's because the script tdc.sh always
return 0.

 # All test results:
 #
 # 1..97
 # ok 1 83be - Create FQ-PIE with invalid number of flows
 # ok 2 8b6e - Create RED with no flags
[...snip]
 # ok 6 5f15 - Create RED with flags ECN, harddrop
 # ok 7 53e8 - Create RED with flags ECN, nodrop
 # ok 8 d091 - Fail to create RED with only nodrop flag
 # ok 9 af8e - Create RED with flags ECN, nodrop, harddrop
 # not ok 10 ce7d - Add mq Qdisc to multi-queue device (4 queues)
 #       Could not match regex pattern. Verify command output:
 # qdisc mq 1: root
 # qdisc fq_codel 0: parent 1:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
 # qdisc fq_codel 0: parent 1:3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
[...snip]
 # ok 96 6979 - Change quantum of a strict ETS band
 # ok 97 9a7d - Change ETS strict band without quantum
 #
 #
 #
 #
 ok 1 selftests: tc-testing: tdc.sh <<< summary result

CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:46:41 +00:00
Kishon Vijay Abraham I
3f92a5be60 arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
Fix 'dtbs_check' in serdes_ln_ctrl (mux@4080) node by changing the node
name to mux-controller@4080.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-3-kishon@ti.com
2021-12-03 17:16:19 +05:30
Kishon Vijay Abraham I
4d39849063 arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-2-kishon@ti.com
2021-12-03 17:16:19 +05:30
Ville Syrjälä
d5ba72f3c1 drm/i915/fbc: No FBC+double wide pipe
FBC and double wide pipe are mutually exclusive. Disable FBC when
we have to resort to double wide.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-20-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:26:36 +02:00
Ville Syrjälä
d3e27f7c51 drm/i915/fbc: s/parms/fbc_state/
Rename the 'params' to just fbc state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-19-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:26:25 +02:00
Ville Syrjälä
0cb9f228bc drm/i915/fbc: Move plane pointer into intel_fbc_state
Currently we track the FBC plane as a pointer under intel_fbc
and also as a i9xx_plane_id under intel_fbc_state. Just store
the pointer once in the fbc state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-18-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:25:21 +02:00
Ville Syrjälä
f4cfdbb02c drm/i915/fbc: Nuke state_cache
fbc->state_cache has now become useless. We can simply update
the reg params directly from the plane/crtc states during
__intel_fbc_enable().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-17-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:23:47 +02:00
Ville Syrjälä
b156def991 drm/i915/fbc: Disable FBC fully on FIFO underrun
Currently a FIFO underrun just causes FBC to be deactivated,
and later checks then prevent it from being reactivated. We
can simpify our lives a bit by logically disabling FBC on
FIFO underruns. This avoids the funny intermediate state where
FBC is logically enabled but can't actually be activated.

v2: intel_wait_for_vblank() is no more

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-16-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:23:38 +02:00
Ville Syrjälä
98009fd73b drm/i915/fbc: Move stuff from intel_fbc_can_enable() into intel_fbc_check_plane()
Don't really see a good reason why we can't just do the vgpu and
modparam checks already in intel_fbc_check_plane().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-15-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:16:01 +02:00
Ville Syrjälä
606754fdcb drm/i915/fbc: Allocate intel_fbc dynamically
In the future we may have more than one FBC instance on some
platforms. So let's just allocate it dynamically. This also
lets us fully hide the implementation from prying eyes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-14-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:13:21 +02:00
Ville Syrjälä
825bd8335e drm/i915/fbc: Introduce intel_fbc_add_plane()
In order to better encapsulate the FBC implementation
introduce a small helper to do the plane<->FBC instance
association.

We'll also try to structure the plane init code such
that introducing multiple FBC instances will be easier
down the line.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-13-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:13:04 +02:00
Ville Syrjälä
d2de8ccfb2 drm/i915/fbc: Move FBC debugfs stuff into intel_fbc.c
In order to encapsulate FBC harder let's just move the debugfs
stuff into intel_fbc.c.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-12-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
2021-12-03 13:12:47 +02:00
Ville Syrjälä
32024bb85e drm/i915/fbc: Pass i915 instead of FBC instance to FBC underrun stuff
The underrun code doesn't need to know any details about FBC, so
just pass in the whole device rather than a specific FBC instance.
We could make this a bit more fine grained by also passing in the
pipe to intel_fbc_handle_fifo_underrun_irq() and letting the FBC
code figure which FBC instance (if any) is active on said pipe.
But that seems a bit overkill for this so don't bother.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-11-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:12:30 +02:00
Ville Syrjälä
62d4874bee drm/i915/fbc: Flatten __intel_fbc_pre_update()
Use an early return to flatten most of __intel_fbc_pre_update().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-10-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:12:19 +02:00
Ville Syrjälä
004f80f91a drm/i915/fbc: Track FBC usage per-plane
In the future we may have multiple planes on the same pipe
capable of using FBC. Prepare for that by tracking FBC usage
per-plane rather than per-crtc.

v2: s/intel_get_crtc_for_pipe/intel_crtc_for_pipe/

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-9-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03 13:12:06 +02:00
Thinh Nguyen
76c4c95dac usb: dwc3: gadget: Skip reading GEVNTSIZn
The driver knows what it needs to set for GEVNTSIZn, and the controller
doesn't modify this register unless there's a hard reset. To save a few
microseconds of register read in read-modify-write operation, simply do
register write with the expected values. This can improve performance
when there are many interrupts generated, which the driver needs to
check and handle.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/efddf4ee5821c4bc5ae7ad90d629ec7a0ebcbf9a.1638240306.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 12:02:49 +01:00
Thinh Nguyen
a02a26eb0a usb: dwc3: gadget: Ignore Update Transfer cmd params
The controller doesn't check for Update Transfer command parameters
DEPCMDPAR{0,1,2}. Writing to these registers is unnecessary. Ignoring
this improves performance slightly by removing the register write
delay.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/997d9ebf38c6bba920d4ee77bd8c77bf81978a55.1638240306.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 12:02:49 +01:00
Thinh Nguyen
bc27117c7c usb: dwc3: gadget: Skip checking Update Transfer status
If we're not setting CMDACT (from "No Response" Update Transfer
command), then there's no point in checking for the command status. So
skip it. This can reduce a register read delay and improve performance.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3dc31cf11581ae3ee82d9202dda3fc17d897d786.1638240306.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 12:02:49 +01:00
Chris Mi
43332cf974 net/sched: act_ct: Offload only ASSURED connections
Short-lived connections increase the insertion rate requirements,
fill the offload table and provide very limited offload value since
they process a very small amount of packets. The ct ASSURED flag is
designed to filter short-lived connections for early expiration.

Offload connections when they are ESTABLISHED and ASSURED.

Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:02:25 +00:00
David S. Miller
119c1a336d Merge branch 'hns3-cleanups'
Guangbin Huang says:

====================
net: hns3: some cleanups for -next

To improve code readability and simplicity, this series add some cleanup
patches for the HNS3 ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:01:00 +00:00
Jie Wang
184da9dc78 net: hns3: fix hns3 driver header file not self-contained issue
The hns3 driver header file uses the structure of other files, but does
not include corresponding file, which causes a check warning that the
header file is not self-contained.

Therefore, the required header file is included in the header file, and
the structure declaration is added to the header file to avoid cyclic
dependency of the header file.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:01:00 +00:00
Hao Chen
7acf76b1cd net: hns3: replace one tab with space in for statement
Replace one tab with space between symbol ')' and '{' in for statement of
function hclge_map_tqp().

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:00:59 +00:00
Hao Chen
40975e749d net: hns3: remove rebundant line for hclge_dbg_dump_tm_pg()
Return value judgment should follow the function call, so remove line
between them.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:00:59 +00:00
Hao Chen
4e599dddee net: hns3: add comments for hclge_dbg_fill_content()
When we use hclge_dbg_fill_content() to fill contents with
specific format according to struct hclge_dbg_item *items,
it may cause content cover due to unreasonable items.

So add comments to explain how to avoid it.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:00:59 +00:00
Hao Chen
5ac4f180bd net: hns3: add void before function which don't receive ret
Add void before function which don't receive ret to improve code
readability.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:00:59 +00:00
Hao Chen
9fcadbaae8 net: hns3: align return value type of atomic_read() with its output
Change output value type of atomic_read() from %u to %d.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:00:59 +00:00
Guangbin Huang
72dcdec10f net: hns3: modify one argument type of function hclge_ncl_config_data_print
The argument len will not be changed in hclge_ncl_config_data_print(), it
is no need to declare as a pointer, so modify it into int type.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:00:59 +00:00
Hao Chen
0cc25c6a14 net: hns3: Align type of some variables with their print type
The c language has a set of implicit type conversions, when
two variables perform bitwise or arithmetic operations.

For example, variable A (type u16/u8) -1, its output is int type variable.
u16/u8 will convert to int type implicitly before it does arithmetic
operations. So, change 1 to unsigned type.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:00:59 +00:00
Guangbin Huang
114967adbc net: hns3: add print vport id for failed message of vlan
This patch adds print vport id when failed to get or set vlan
filter parameters.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 11:00:59 +00:00