Convert all DBG_88E_LEVEL macro calls in os_dep/ioctl_linux.c to plain
netdev_dbg calls, as although the information is potentially useful,
we should be exposing it using standard kernel debugging functionality.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211129002041.865-7-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert DBG_88E_LEVEL macro call in hal/rtl8188e_hal_init.c to plain
dev_dbg call, as although the information is potentially useful, we should
be exposing it using standard kernel debugging functionality.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211129002041.865-6-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert all DBG_88E_LEVEL macro calls in core/rtw_ioctl_set.c to plain
netdev_dbg calls, as although the information is potentially useful,
we should be exposing it using standard kernel debugging functionality.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211129002041.865-5-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert single DBG_88E_LEVEL macro call in core/rtw_xmit.c to plain
netdev_dbg call, as although the information is potentially useful,
we should be exposing it using standard kernel debugging functionality.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211129002041.865-4-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert all DBG_88E_LEVEL macro calls in core/rtw_pwrctrl.c to plain
netdev_dbg calls, as although the information is potentially useful,
we should be exposing it using standard kernel debugging functionality.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211129002041.865-3-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert all DBG_88E_LEVEL macro calls in core/rtw_mlme_ext.c to plain
netdev_dbg calls, as although the information is potentially useful, we
should be exposing it using standard kernel debugging functionality.
Also fix some indentation issues in the block of one such call, and
remove usage of FUNC_ADPT_FMT/FUNC_ADPT_ARG macros in another, as
netdev_dbg provides equivalent functionality.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211129002041.865-2-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module parameter rtw_rf_config is not used in the driver.
Remove it and remove the now unused enum rt_rf_type_def.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211128170924.5874-11-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field rf_type of struct hal_data_8188e is set to RF_1T1R and
never changed. Also it is used only in a call to netdev_dbg() which
is not very useful since RTL8188EU chips are always 1T1R. Remove
the netdev_dbg() and remove rf_type from the hal_data_8188e
structure.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211128170924.5874-10-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rf_type is always RF_1T1R. Remove it from bb_reg_dump() and remove
resulting dead code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211128170924.5874-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In getTxPowerIndex88E() the variable TxCount is set to RF_PATH_A and
never changed. Remove the unnecessary extra variable and replace its
usage with RF_PATH_A.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211128170924.5874-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pHalData->rf_type is always RF_1T1R. As a result the variable
path_nums is always set to 1 and the for loop is entered only
once with TxCount = 0. Also RF_PATH_A = 0. Remove the unneeded
check for pHalData->rf_type and resulting dead code from
getTxPowerIndex88E().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211128170924.5874-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pHalData->rf_type is always RF_1T1R. Remove unnecessary checks and
related dead code from storePwrIndexDiffRateOffset().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211128170924.5874-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rf_type is always RF_1T1R. Remove it from issue_assocreq() and remove
related dead code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211128170924.5874-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rf_type is always RF_1T1R. Remove it from rtw_update_ht_cap() and
remove related dead code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211128170924.5874-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.
For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the second parameter of the loadparam function. This parameter
is not used.
Reviewed-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126130400.26151-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The _ps_close_RF is empty. Remove it.
Reviewed-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126130400.26151-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The _ps_open_RF function is empty. Remove it.
Reviewed-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126130400.26151-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only caller of pm_netdev_open sets bnormal to true. In this case,
pm_netdev_open just calls netdev_open.
Remove pm_netdev_open and call netdev_open directly.
Reviewed-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126130400.26151-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wire up the generic support for managing task stack allocations via vmalloc,
and implement the entry code that detects whether we faulted because of a
stack overrun (or future stack overrun caused by pushing the pt_regs array)
While this adds a fair amount of tricky entry asm code, it should be
noted that it only adds a TST + branch to the svc_entry path. The code
implementing the non-trivial handling of the overflow stack is emitted
out-of-line into the .text section.
Since on ARM, we rely on do_translation_fault() to keep PMD level page
table entries that cover the vmalloc region up to date, we need to
ensure that we don't hit such a stale PMD entry when accessing the
stack. So we do a dummy read from the new stack while still running from
the old one on the context switch path, and bump the vmalloc_seq counter
when PMD level entries in the vmalloc range are modified, so that the MM
switch fetches the latest version of the entries.
Note that we need to increase the per-mode stack by 1 word, to gain some
space to stash a GPR until we know it is safe to touch the stack.
However, due to the cacheline alignment of the struct, this does not
actually increase the memory footprint of the struct stack array at all.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
The current r8188eu driver code has no support for interrupt in
endpoints. Some parts of the code assume implicitly that we use
one single bulk in endpoint for the incoming network data.
Make this assumption clearer and reject devices that have more than
one bulk in endpoint. Ignore any interrupt in endpoints.
We can then change RtInPipe into a single value instead of an array.
There's no need any more to pass around the number of in endpoints.
We know that it's one or the device would have been rejected.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126173205.21352-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original Thumb-2 enablement patches updated the stack realignment
code in svc_entry to work around the lack of a STMIB instruction in
Thumb-2, by subtracting 4 from the frame size, inverting the sense of
the misaligment check, and changing to a STMIA instruction and a final
stack push of a 4 byte quantity that results in the stack becoming
aligned at the end of the sequence. It also pushes and pops R0 to the
stack in order to have a temp register that Thumb-2 allows in general
purpose ALU instructions, as TST using SP is not permitted.
Both are a bit problematic for vmap'ed stacks, as using the stack is
only permitted after we decide that we did not overflow the stack, or
have already switched to the overflow stack.
As for the alignment check: the current approach creates a corner case
where, if the initial SUB of SP ends up right at the start of the stack,
we will end up subtracting another 8 bytes and overflowing it. This
means we would need to add the overflow check *after* the SUB that
deliberately misaligns the stack. However, this would require us to keep
local state (i.e., whether we performed the subtract or not) across the
overflow check, but without any GPRs or stack available.
So let's switch to an approach where we don't use the stack, and where
the alignment check of the stack pointer occurs in the usual way, as
this is guaranteed not to result in overflow. This means we will be able
to do the overflow check first.
While at it, switch to R1 so the mode stack pointer in R0 remains
accessible.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
There's no need to store the number of endpoints in a global struct.
We only need it at startup when we iterate over the endpoints.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126173205.21352-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the previous cleanup, ffaddr2pipehdl is called only by
rtw_write_port. This function will never ask for the pipe handle
of the interrupt in pipe. We can remove the related code.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126173205.21352-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no point in calling ffaddr2pipehdl from rtw_read_port if the
endpoint address is constant. We can call usb_rcvbulkpipe ourselves
to get the pipe handle.
We can now remove RECV_BULK_IN_ADDR.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126173205.21352-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All supported devices use a single bulk in endpoint for receiving
network data.
The rtw_read_port function needs no addr parameter. The ff_hwaddr in
struct recv_priv is also a constant value. We can use RECV_BULK_IN_ADDR
directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126173205.21352-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The load-multiple instruction that essentially performs the switch_to
operation in ARM mode, by loading all callee save registers as well the
stack pointer and the program counter, is split into 3 separate loads
for Thumb-2, with the IP register used as a temporary to capture the
value of R4 before it gets overwritten.
We can clean this up a bit, by sticking with a single LDMIA instruction,
but one that pops SP and PC into IP and LR, respectively, and by using
ordinary move register and branch instructions to get those values into
SP and PC. This also allows us to move the set_current call closer to
the assignment of SP, reducing the window where those are mutually out
of sync. This is especially relevant for CONFIG_VMAP_STACK, which is
being introduced in a subsequent patch, where we need to issue a load
that might fault from the new stack while running from the old one, to
ensure that stale PMD entries in the VMALLOC space are synced up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
When unwinding the stack from a stack overflow, we are likely to start
from a stack push instruction, given that this is the most common way to
grow the stack for compiler emitted code. This push instruction rarely
appears anywhere else than at offset 0x0 of the function, and if it
doesn't, the compiler tends to split up the unwind annotations, given
that the stack frame layout is apparently not the same throughout the
function.
This means that, in the general case, if the frame's PC points at the
first instruction covered by a certain unwind entry, there is no way the
stack frame that the unwind entry describes could have been created yet,
and so we are still on the stack frame of the caller in that case. So
treat this as a special case, and return with the new PC taken from the
frame's LR, without applying the unwind transformations to the virtual
register set.
This permits us to unwind the call stack on stack overflow when the
overflow was caused by a stack push on function entry.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
The memset implementation carves up the code in different sections, each
covered with their own unwind info. In this case, it is done in a way
similar to how the compiler might do it, to disambiguate between parts
where the return address is in LR and the SP is unmodified, and parts
where a stack frame is live, and the unwinder needs to know the size of
the stack frame and the location of the return address within it.
Only the placement of the unwind directives is slightly odd: the stack
pushes are placed in the wrong sections, which may confuse the unwinder
when attempting to unwind with PC pointing at the stack push in
question.
So let's fix this up, by reordering the directives and instructions as
appropriate.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
The memmove routine is a bit unusual in the way it manages the stack
pointer: depending on the execution path through the function, the SP
assumes different values as different subsets of the register file are
preserved and restored again. This is problematic when it comes to EHABI
unwind info, as it is not instruction accurate, and does not allow
tracking the SP value as it changes.
Commit 207a6cb069 ("ARM: 8224/1: Add unwinding support for memmove
function") addressed this by carving up the function in different chunks
as far as the unwinder is concerned, and keeping a set of unwind
directives for each of them, each corresponding with the state of the
stack pointer during execution of the chunk in question. This not only
duplicates unwind info unnecessarily, but it also complicates unwinding
the stack upon overflow.
Instead, let's do what the compiler does when the SP is updated halfway
through a function, which is to use a frame pointer and emit the
appropriate unwind directives to communicate this to the unwinder.
Note that Thumb-2 uses R7 for this, while ARM uses R11 aka FP. So let's
avoid touching R7 in the body of the function, so that Thumb-2 can use
it as the frame pointer. R11 was not modified in the first place.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
The memcpy template is a bit unusual in the way it manages the stack
pointer: depending on the execution path through the function, the SP
assumes different values as different subsets of the register file are
preserved and restored again. This is problematic when it comes to EHABI
unwind info, as it is not instruction accurate, and does not allow
tracking the SP value as it changes.
Commit 279f487e0b ("ARM: 8225/1: Add unwinding support for memory
copy functions") addressed this by carving up the function in different
chunks as far as the unwinder is concerned, and keeping a set of unwind
directives for each of them, each corresponding with the state of the
stack pointer during execution of the chunk in question. This not only
duplicates unwind info unnecessarily, but it also complicates unwinding
the stack upon overflow.
Instead, let's do what the compiler does when the SP is updated halfway
through a function, which is to use a frame pointer and emit the
appropriate unwind directives to communicate this to the unwinder.
Note that Thumb-2 uses R7 for this, while ARM uses R11 aka FP. So let's
avoid touching R7 in the body of the template, so that Thumb-2 can use
it as the frame pointer. R11 was not modified in the first place.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Now that we have enabled IRQ stacks, any softIRQs that are handled over
the back of a hard IRQ will run from the IRQ stack as well. However, any
synchronous softirq processing that happens when re-enabling softIRQs
from task context will still execute on that task's stack.
Since any call to local_bh_enable() at any level in the task's call
stack may trigger a softIRQ processing run, which could potentially
cause a task stack overflow if the combined stack footprints exceed the
stack's size, let's run these synchronous invocations of do_softirq() on
the IRQ stack as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Restructure the code and add the unwind annotations so that both the
frame pointer unwinder as well as the EHABI unwind info based unwinder
will be able to follow the call stack through call_with_stack().
Since GCC and Clang use different formats for the stack frame, two
methods are implemented: a GCC version that pushes fp, sp, lr and pc for
compatibility with the frame pointer unwinder, and a second version that
works with Clang, as well as with the EHABI unwinder both in ARM and
Thumb2 modes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Now that we no longer rely on the stack pointer to access the current
task struct or thread info, we can implement support for IRQ stacks
cleanly as well.
Define a per-CPU IRQ stack and switch to this stack when taking an IRQ,
provided that we were not already using that stack in the interrupted
context. This is never the case for IRQs taken from user space, but ones
taken while running in the kernel could fire while one taken from user
space has not completed yet.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
The Clang backtrace code dereferences the link register value pulled
from the stack to decide whether the caller was a branch-and-link
instruction, in order to subsequently decode the offset to find the
start of the calling function. Unlike other loads in this routine, this
one is not protected by a fixup, and may therefore cause a crash if the
address in question is bogus.
So let's fix this, by treating the fault as a failure to decode the 'bl'
instruction. To avoid a label renum, reuse a fixup label that guards an
instruction that cannot fault to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
The existing code that dumps the contents of the pt_regs structure
passed to __entry routines does so while unwinding the callee frame, and
dereferences the stack pointer as a struct pt_regs*. This will no longer
work when we enable support for IRQ or overflow stacks, because the
struct pt_regs may live on the task stack, while we are executing from
another stack.
The unwinder has access to this information, but only while unwinding
the calling frame. So let's combine the exception stack dumping code
with the handling of the calling frame as well. By printing it before
dumping the caller/callee addresses, the output order is preserved.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
The unwind info based stack unwinder will make its own call to
dump_mem() to dump the exception stack, so give it external linkage.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Implement support in the unwinder for dealing with multiple stacks.
This will be needed once we add support for IRQ stacks, or for the
overflow stack used by the vmap'ed stacks code.
This involves tracking the unwind opcodes that either update the virtual
stack pointer from another virtual register, or perform an explicit
subtract on the virtual stack pointer, and updating the low and high
bounds that we use to sanitize the stack pointer accordingly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Add a bl_r macro that abstract the difference between the ways indirect
calls are performed on older and newer ARM architecture revisions.
The main difference is to prefer blx instructions over explicit LR
assignments when possible, as these tend to confuse the prediction logic
in out-of-order cores when speculating across a function return.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
This code appears to be no longer used so let's get rid of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Currently, we implement the per-task stack protector for ARM using a GCC
plugin, due to lack of native compiler support. However, work is
underway to get this implemented in the compiler, which means we will be
able to deprecate the GCC plugin at some point.
In the meantime, we will need to support both, where the native compiler
implementation is obviously preferred. So let's wire this up in Kconfig
and the Makefile.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Enabling the stack protector in the decompressor is of dubious value,
given that it uses a fixed value for the canary, cannot print any output
unless CONFIG_DEBUG_LL is enabled (which relies on board specific build
time settings), and is already disabled for a good chunk of the code
(libfdt).
So let's just disable it in the decompressor. This will make it easier
in the future to manage the command line options that would need to be
removed again in this context for the TLS register based stack
protector.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Some variables are leaked in the error handling in alloc_rtllib(), free
the variables in the error path.
Fixes: 94a799425e ("From: wlanfae <wlanfae@realtek.com>")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211202030704.2425621-3-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If it fails to allocate 'dot11d_info', rtllib_softmac_init()
should return error code. And remove unneccessary error message.
Fixes: 94a799425e ("From: wlanfae <wlanfae@realtek.com>")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211202030704.2425621-2-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>