Don't populate various arrays on the stack but instead make them
static const. Also makes the object code smaller by a few hundred
bytes.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211129224236.506883-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the lockdep asserts until after the ctl pointer has been checked
for NULL, to avoid potentially NULL pointer dereferences.
Fixes: fb2f364fb5b9 ("firmware: cs_dsp: Add lockdep asserts to interface functions")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211130102842.26410-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These are only assigned to the ops fields in the snd_soc_dai_link struct
which is a pointer to const struct snd_soc_ops. Make them const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211127091954.12075-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On my T14s Gen2 I saw the following:
[ 16.057258] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[ 16.057261] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 4
[ 16.057263] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 5
[...and so on.]
It looks like the double newline is a mistake, so remove one.
Signed-off-by: Chris Down <chris@chrisdown.name>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/YaOS0sBueAfApwOx@chrisdown.name
Signed-off-by: Mark Brown <broonie@kernel.org>
These are only assigned to the ops field in the snd_soc_dai_link which
is a pointer to const struct snd_soc_ops. Make them const to allow the
compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211127093147.17368-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the latest Lenovo Thinkstation laptops, we often experience the
speaker failure after rebooting, check the dmesg, we could see:
sof-audio-pci-intel-tgl 0000:00:1f.3: codec #0 probe error, ret: -5
The analogue codec on the machine is ALC287, then we designed a
testcase to reboot and check the codec probing result repeatedly, we
found the analogue codec probing always failed at least once within
several minutes to several hours (roughly 1 reboot per min). This
issue happens on all laptops of this Thinkstation model, but with
legacy HDA driver, we couldn't reproduce this issue on those laptops.
And so far, this issue is not reproduced on machines which don't
belong to this model.
We tried to make the hda_dsp_ctrl_init_chip() same as
hda_intel_init_chip() which is the controller init routine in the
legacy HDA driver, but it didn't help.
We found when issue happens, the resp is -1, and if we let driver
re-run send_cmd() and get_response(), it will get the correct response
10ec0287, then driver continues the rest work, finally boot to the
desktop and all audio function work well.
Here adding codec probing retries to 3 times, it could fix the issue
on this Thinkstation model, and it doesn't bring impact to other
machines.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130090606.529348-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "index" is potentially used without being initialized on the error
path.
Fixes: fc329c1de4 ("ASoC: amd: add platform devices for acp6x pdm driver and dmic driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211130125633.GA24941@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, the DAI template was used directly, which lead to
fun bugs such as "why is my channels_max changing?" when one
instantiated more than one i2s_tdm IP block in a device tree.
This change makes it so that we instead duplicate the template
struct, and then use that.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211125084900.417102-1-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
avic_set_running() passes the current CPU to avic_vcpu_load(), albeit
via vcpu->cpu rather than smp_processor_id(). If the thread is migrated
while avic_set_running runs, the call to avic_vcpu_load() can use a stale
value for the processor id. Avoid this by blocking preemption over the
entire execution of avic_set_running().
Reported-by: Sean Christopherson <seanjc@google.com>
Fixes: 8221c13700 ("svm: Manage vcpu load/unload when enable AVIC")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is nothing to synchronize if APICv is disabled, since neither
other vCPUs nor assigned devices can set PIR.ON.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's not necessary to free memory allocated with devm_kzalloc
and using kfree leads to a double free.
Fixes: 35aefaad32 ("net: ixp4xx_hss: Convert to use DT probing")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If err is true, the function will be returned, but mutex_lock isn't
released.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sparse tool complains as follows:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2656:28: warning:
symbol 'hclge_mac_speed_map_to_fw' was not declared. Should it be static?
This symbol is not used outside of hclge_main.c, so marks it static.
Fixes: e46da6a3d4 ("net: hns3: refine function hclge_cfg_mac_speed_dup_hw()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Volodymyr Mytnyk says:
====================
net: prestera: acl: migrate to new vTcam/counter api
This patch series aims to use new vTcam and Counter API
provided by latest fw version. The advantage of using
this API is the following:
- provides a way to have a rule with desired Tcam size (improves
Tcam memory utilization).
- batch support for acl counters gathering (improves performance)
- gives more control over HW ACL engine (actions/matches/bindings)
to be able to support more features in the future driver
versions
Note: the feature set left the same as was before this patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make flower to use counter API to get rule HW statistics.
Co-developed-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add counter API for getting HW statistics.
- HW statistics gathered by this API are deleyed.
- Batch of conters is supported.
- acl stat is supported.
Co-developed-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add new vTCAM HW API to configure HW ACLs.
- Migrate acl to use new vTCAM HW API.
- No counter support in this patch-set.
Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink_resources_unregister() used second parameter as an
entry point for the recursive removal of devlink resources. None
of the callers outside of devlink core needed to use this field,
so let's remove it.
As part of this removal, the "struct devlink_resource" was moved
from .h to .c file as it is not possible to use in any place in
the code except devlink.c.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the blamed commit, the second memory resource was not considered
anymore as optional. On some platforms like sparx5 the second resource
is optional. So add it back as optional and restore the comment that
says so.
Fixes: a27a762828 ("net: mdio: mscc-miim: convert to a regmap implementation")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Alexandra and Wenjia as maintainers for drivers/s390/net and iucv.
Also, remove myself as maintainer for these areas.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have VLAN PTP support(via get_ts_info) on kernel, and bond support(by
getting active interface via netlink message) on userspace tool linuxptp.
But there are always some users who want to use PTP with VLAN over bond,
which is not able to do with the current implementation.
This patch passed get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device
with bond mode active-backup/tlb/alb. With this users could get kernel native
bond or VLAN over bond PTP support.
Test with ptp4l and it works with VLAN over bond after this patch:
]# ptp4l -m -i bond0.23
ptp4l[53377.141]: selected /dev/ptp4 as PTP clock
ptp4l[53377.142]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[53377.143]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[53377.143]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[53384.127]: port 1: LISTENING to MASTER on ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES
ptp4l[53384.127]: selected local clock e41d2d.fffe.123db0 as best master
ptp4l[53384.127]: port 1: assuming the grand master role
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix two trivial typos of 'pakcet' in cxgb3 kernel doc.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit c55211892f ("dpaa2-eth: support PTP Sync packet one-step
timestamping") forgets to destroy workqueue at the end of remove
function.
Fix this by adding destroy_workqueue before fsl_mc_portal_free and
free_netdev.
Fixes: c55211892f ("dpaa2-eth: support PTP Sync packet one-step timestamping")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We're only adding BCMs to the commit list in aggregate(), but there are
cases where pre_aggregate() is called without subsequently calling
aggregate(). In particular, in icc_sync_state() when a node with initial
BW has zero requests. Since BCMs aren't added to the commit list in
these cases, we don't actually send the zero BW request to HW. So the
resources remain on unnecessarily.
Add BCMs to the commit list in pre_aggregate() instead, which is always
called even when there are no requests.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[georgi: remove icc_sync_state for platforms with incomplete support]
Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add the missing free_netdev() before return from ltq_etop_probe()
in the error handling case.
Fixes: 14d4e308e0 ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a bug in which the receiving of packets can stop in the zero-copy
driver. Ice HW ignores 3 lower bits from QRX_TAIL register, which means
that tail is bumped only on intervals of 8. Currently with XSK RX
batching in place, ice_alloc_rx_bufs_zc() clears the status_error0 only
of the last descriptor that has been allocated/taken from the XSK buffer
pool. status_error0 includes DD bit that is looked upon by the
ice_clean_rx_irq_zc() to tell if a descriptor can be processed.
The bug can be triggered when driver updates the ntu but not the
QRX_TAIL, so HW wouldn't have a chance to write to the ready
descriptors. Later on driver moves the ntc to the mentioned set of
descriptors and interprets them as a ready to be processed, since
corresponding DD bits were not cleared nor any writeback has happened
that would clear it. This can then lead to ntc == ntu case which means
that ring is empty and no further packet processing.
Fix the XSK traffic hang that can be observed when l2fwd scenario from
xdpsock is used by making sure that status_error0 is cleared for each
descriptor that is fed to HW and therefore we are sure that driver will
not processed non-valid DD bits. This will also prevent the driver from
processing the descriptors that were allocated in favor of the
previously processed ones, but writeback didn't happen yet.
Fixes: db804cfc21 ("ice: Use the xsk batched rx allocation interface")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'bitmap_fill()' fills a bitmap one 'long' at a time.
It is likely that an exact number of bits is expected.
Use 'bitmap_set()' instead in order not to set unexpected bits.
Fixes: e531f76757 ("net: mvpp2: handle cases where more CPUs are available than s/w threads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can remove a bit of code duplication by reusing the new
fib6_nh_release_dsts helper in fib6_nh_release. Their only difference is
that fib6_nh_release's version doesn't use atomic operation to swap the
pointers because it assumes the fib6_nh is no longer visible, while
fib6_nh_release_dsts can be used anywhere.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can optimize resilient nexthop group replaces by reducing the number of
synchronize_net calls. After commit 1005f19b93 ("net: nexthop: release
IPv6 per-cpu dsts when replacing a nexthop group") we always do a
synchronize_net because we must ensure no new dsts can be created for the
replaced group's removed nexthops, but we already did that when replacing
resilient groups, so if we always call synchronize_net after any group
type replacement we'll take care of both cases and reduce synchronize_net
calls for resilient groups.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Assigning crypto_info variables in advance can simplify the logic
of accessing value and move related local variables to a smaller
scope.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
dwmac-qcom-ethqos currently exposes a mechanism to dump rgmii registers
after the 'stmmac_dvr_probe()' returns. However with commit
5ec5582343 ("net: stmmac: add clocks management for gmac driver"),
we now let 'pm_runtime_put()' disable the clocks before returning from
'stmmac_dvr_probe()'.
This causes a crash when 'rgmii_dump()' register dumps are enabled,
as the clocks are already off.
Since other dwmac drivers (possible future users as well) might
require a similar register dump feature, introduce a platform level
callback to allow the same.
This fixes the crash noticed while enabling rgmii_dump() dumps in
dwmac-qcom-ethqos driver as well. It also allows future changes
to keep a invoking the register dump callback from the correct
place inside 'stmmac_dvr_probe()'.
Fixes: 5ec5582343 ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
================================================================================
UBSAN: shift-out-of-bounds in arch/powerpc/mm/kasan/book3s_32.c:22:23
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.5-gentoo-PowerMacG4 #9
Call Trace:
[c214be60] [c0ba0048] dump_stack_lvl+0x80/0xb0 (unreliable)
[c214be80] [c0b99288] ubsan_epilogue+0x10/0x5c
[c214be90] [c0b98fe0] __ubsan_handle_shift_out_of_bounds+0x94/0x138
[c214bf00] [c1c0f010] kasan_init_region+0xd8/0x26c
[c214bf30] [c1c0ed84] kasan_init+0xc0/0x198
[c214bf70] [c1c08024] setup_arch+0x18/0x54c
[c214bfc0] [c1c037f0] start_kernel+0x90/0x33c
[c214bff0] [00003610] 0x3610
================================================================================
This happens when the directly mapped memory is a power of 2.
Fix it by checking the shift and set the result to 0 when shift is -1
Fixes: 7974c47326 ("powerpc/32s: Implement dedicated kasan_init_region()")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215169
Link: https://lore.kernel.org/r/15cbc3439d4ad988b225e2119ec99502a5cc6ad3.1638261744.git.christophe.leroy@csgroup.eu
module_alloc() first tries to allocate module text within 24 bits direct
jump from kernel text, and tries a wider allocation if first one fails.
When first allocation fails the following is observed in kernel logs:
vmap allocation for size 2400256 failed: use vmalloc=<size> to increase size
systemd-udevd: vmalloc error: size 2395133, vm_struct allocation failed, mode:0xcc0(GFP_KERNEL), nodemask=(null)
CPU: 0 PID: 127 Comm: systemd-udevd Tainted: G W 5.15.5-gentoo-PowerMacG4 #9
Call Trace:
[e2a53a50] [c0ba0048] dump_stack_lvl+0x80/0xb0 (unreliable)
[e2a53a70] [c0540128] warn_alloc+0x11c/0x2b4
[e2a53b50] [c0531be8] __vmalloc_node_range+0xd8/0x64c
[e2a53c10] [c00338c0] module_alloc+0xa0/0xac
[e2a53c40] [c027a368] load_module+0x2ae0/0x8148
[e2a53e30] [c027fc78] sys_finit_module+0xfc/0x130
[e2a53f30] [c0035098] ret_from_syscall+0x0/0x28
...
Add __GFP_NOWARN flag to first allocation so that no warning appears
when it fails.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 2ec13df167 ("powerpc/modules: Load modules closer to kernel text")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/93c9b84d6ec76aaf7b4f03468e22433a6d308674.1638267035.git.christophe.leroy@csgroup.eu
A successful 'of_platform_populate()' call should be balanced by a
corresponding 'of_platform_depopulate()' call in the error handling path
of the probe, as already done in the remove function.
A successful 'venus_firmware_init()' call should be balanced by a
corresponding 'venus_firmware_deinit()' call in the error handling path
of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: f9799fcce4 ("media: venus: firmware: register separate platform_device for firmware loader")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The normal path of the function makes the assumption that
'pm_ops->core_power' may be NULL.
We should make the same assumption in the error handling path or a NULL
pointer dereference may occur.
Add the missing test before calling 'pm_ops->core_power'
Fixes: 9e8efdb578 ("media: venus: core: vote for video-mem path")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In exististing implimentation, in min_loaded_core() for low_power
vpp frequency value is considering as vpp_freq instead of low_power_freq.
Fixed this by correcting vpp frequency calculation for encoder.
Fixes: 3cfe5815ce (media: venus: Enable low power setting for encoder)
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Allow the LPID bit width and partition table size to be set at runtime
from the device tree.
Move the PID bit width detection into the same place.
KVM does not support using the extra bits yet, this is mainly required
to get the PTCR register values correct (so KVM will run but it will
not allocate > 4096 LPIDs).
OPAL firmware provides this property for POWER10 CPUs since skiboot
commit 9b85f7d961f2 ("hdata: add mmu-pid-bits and mmu-lpid-bits for
POWER10 CPUs").
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211129030915.1888332-1-npiggin@gmail.com
V4L2_PIX_FMT_HM12 was redefined to V4L2_PIX_FMT_NV12_16L16, so use the
new name in libv4l-introduction.rst.
This fixes this warning:
libv4l-introduction.rst:27: WARNING: undefined label: v4l2-pix-fmt-hm12
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add missing documentation for two field. This fixes these kernel-doc
warnings:
drivers/media/platform/omap3isp/omap3isp.h:107: warning: Function parameter or member 'vp_clk_pol' not described in 'isp_ccp2_cfg'
drivers/media/platform/omap3isp/omap3isp.h:107: warning: Function parameter or member 'lanecfg' not described in 'isp_ccp2_cfg'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
smatch warns about data->list not being removed from list:
drivers/media/cec/core/cec-adap.c:926 cec_transmit_msg_fh() warn: '&data->list' not removed from list
It is a false warning, but it doesn't hurt to make the code more robust
and safely unhook data->list and data->xfer_list together with a WARN_ON
if this is actually ever needed (this really shouldn't happen).
Note that fixing the data->list warning just replaced it with a new similar
warning for data->xfer_list, so both needed to be addressed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stop the CODA960 JPEG encoder from overflowing capture buffers.
The bitstream buffer overflow interrupt doesn't seem to be connected,
so this has to be handled via timeout instead.
Reported-by: Martin Weber <martin.weber@br-automation.com>
Fixes: 96f6f62c46 ("media: coda: jpeg: add CODA960 JPEG encoder support")
Tested-by: Martin Weber <martin.weber@br-automation.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The JPEG encoder found in the Hantro H1 encoder block only produces a
raw entropy-encoded scan. The driver is responsible for building a JPEG
compliant bitstream and placing the entropy-encoded scan in it. Right
now the driver uses a bounce buffer for the hardware to output the raw
scan to.
In commit e765dba11e ("hantro: Move hantro_enc_buf_finish to JPEG
codec_ops.done"), the code that copies the raw scan from the bounce
buffer to the capture buffer was moved, but was only hooked up for the
Hantro H1 (then RK3288) variant. The RK3399 variant was broken,
producing a JPEG bitstream without the scan, and the capture buffer's
.bytesused field unset.
Fix this by duplicating the code that is executed when the JPEG encoder
finishes encoding a frame. As the encoded length is read back from
hardware, and the variants having different register layouts, the
code is duplicated rather than shared.
Fixes: e765dba11e ("hantro: Move hantro_enc_buf_finish to JPEG codec_ops.done")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function mtk_venc_get_q_data always returns a reference
so there is no need to check if the return value is null.
In addition move the q_data initialization to the declaration
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function vidioc_try_fmt has a big 'if-else' for
the capture and output cases. There is hardly any code
outside of that condition. It is therefore better to split
that functions into two different functions, one for each case.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>