Commit graph

1,105,074 commits

Author SHA1 Message Date
Satya Priya
59eadd2af3
regulator: qcom-rpmh: Add PMG1110 regulators
Add support for PMG1110 regulators.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Link: https://lore.kernel.org/r/1637668167-31325-3-git-send-email-quic_c_skakit@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:56 +00:00
Satya Priya
ac88e9526d
dt-bindings: regulator: Add compatible for pmg1110
Add compatible string for pmg1110 pmic.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Link: https://lore.kernel.org/r/1637668167-31325-2-git-send-email-quic_c_skakit@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:55 +00:00
David S. Miller
fc1e5a3613 Merge branch 'vxlan-port'
Guangbin Huang says:

====================
net: vxlan: add macro definition for number of IANA VXLAN-GPE port

This series add macro definition for number of IANA VXLAN-GPE port for
cleanup.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:19:53 +00:00
Hao Chen
e54b708c54 net: hns3: use macro IANA_VXLAN_GPE_UDP_PORT to replace number 4790
This patch uses macro IANA_VXLAN_GPE_UDP_PORT to replace number 4790 for
cleanup.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:19:53 +00:00
Hao Chen
ed618bd809 net: vxlan: add macro definition for number of IANA VXLAN-GPE port
Add macro definition for number of IANA VXLAN-GPE port for generic use.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:19:53 +00:00
Jernej Skrabec
679de7b64f
ASoC: sunxi: sun4i-spdif: Implement IEC958 control
SPDIF core is capable of sending custom status.

Implement IEC958 control handling.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20211117194458.2249643-1-jernej.skrabec@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:49 +00:00
lvzhaoxiong
425c5fce8a
ASoC: qcom: Add support for ALC5682I-VS codec
Qcom machine driver adds rt5682s support in this patch.
Card name can be specified from dts by model property, and driver makes
use of the name to distinguish which headset codec is on the board.

Signed-off-by: lvzhaoxiong <lvzhaoxiong@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20211123024329.21998-1-lvzhaoxiong@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:48 +00:00
Samuel Holland
fd03cf7f5b
ASoC: sun8i-codec: Add AIF, ADC, and DAC volume controls
This allows changing the volume of each digital input/output
independently, and provides the only "master volume" for the DAC.
(The ADC also has a gain control on the analog side.)

While the hardware supports digital gain up to +72dB, the controls here
are limited to +24dB maximum, as any gain above that level makes volume
sliders difficult to use, and is extremely likely to cause clipping.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20211118033645.43524-1-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:47 +00:00
Kuninori Morimoto
dd894f4caf
ASoC: soc-pcm: tidyup soc_pcm_pointer()'s delay update method
No driver directly updates runtime->delay in .pointer.
This patch cleanups its method.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgq4wnkx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:45 +00:00
Kuninori Morimoto
796b64a72d
ASoC: intel: sst-mfld-platform-pcm: add .delay support
Now ALSA SoC supports .delay for component.
This patch uses it, and not update runtime->delay on .pointer
directly / secretly.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871r3gy25j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:44 +00:00
Kuninori Morimoto
feea640aaf
ASoC: amd: acp-pcm-dma: add .delay support
Now ALSA SoC supports .delay for component.
This patch uses it, and not update runtime->delay on .pointer
directly / secretly.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735nwy25o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:42 +00:00
Kuninori Morimoto
403f830e7a
ASoC: soc-component: add snd_soc_pcm_component_delay()
Current soc-pcm.c :: soc_pcm_pointer() is assuming that
component driver might update runtime->delay silently in
snd_soc_pcm_component_pointer() (= A).

	static snd_pcm_uframes_t soc_pcm_pointer(...)
	{
		...

		/* clearing the previous total delay */
=>		runtime->delay = 0;

(A)		offset = snd_soc_pcm_component_pointer(substream);

		/* base delay if assigned in pointer callback */
=>		delay = runtime->delay;
		...
	}

1) The behavior that ".pointer callback secretly updates
   runtime->delay" is strange and confusable.

2) Current snd_soc_pcm_component_pointer() uses 1st found component's
   .pointer callback only, thus it is no problem for now.
   But runtime->delay might be overwrote if it adjusted to multiple
   components in the future.

3) Component delay is updated at .pointer callback timing (secretly).
   But some components which doesn't have .pointer callback might want
   to increase runtime->delay for some reasons.

We already have .delay function for DAI, but not have for Component.
This patch adds new snd_soc_pcm_component_delay() for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874k8cy25t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:41 +00:00
Kuninori Morimoto
8544f08c81
ASoC: soc-dai: update snd_soc_dai_delay() to snd_soc_pcm_dai_delay()
Current soc_pcm_pointer() is manually calculating
both CPU-DAI's   max delay (= A)
and  Codec-DAI's max delay (= B).

	static snd_pcm_uframes_t soc_pcm_pointer(...)
	{
		...
 ^		for_each_rtd_cpu_dais(rtd, i, cpu_dai)
(A)			cpu_delay = max(cpu_delay, ...);
 v		delay += cpu_delay;

 ^		for_each_rtd_codec_dais(rtd, i, codec_dai)
(B)			codec_delay = max(codec_delay, ...);
 v		delay += codec_delay;

		runtime->delay = delay;
		...
	}

Current soc_pcm_pointer() and the total delay calculating
is not readable / difficult to understand.

This patch update snd_soc_dai_delay() to snd_soc_pcm_dai_delay(),
and calcule both CPU/Codec delay in one function.

Link: https://lore.kernel.org/r/87fszl4yrq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yssy25z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:40 +00:00
Nicolas Frattaroli
07fb78a78d
spi: spi-rockchip: Add rk3568-spi compatible
This adds a compatible string for the SPI controller found on
the RK3566 and RK3568 SoCs.

Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211126154344.724316-2-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29 12:19:32 +00:00
Ole Ernst
49989adc38 USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71

Disable LPM to resolve the issue.

Signed-off-by: Ole Ernst <olebowle@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:16:11 +00:00
Nicholas Piggin
aebd1fb45c powerpc: flexible GPR range save/restore macros
Introduce macros that operate on a (start, end) range of GPRs, which
reduces lines of code and need to do mental arithmetic while reading the
code.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211022061322.2671178-1-npiggin@gmail.com
2021-11-29 23:15:20 +11:00
Luiz Angelo Daros de Luca
1e89ad864d net: dsa: realtek-smi: fix indirect reg access for ports>3
This switch family can have up to 8 UTP ports {0..7}. However,
INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3,
dropping the most significant bit during indirect register reads and
writes. Reading or writing ports 4, 5, 6, and 7 registers was actually
manipulating, respectively, ports 0, 1, 2, and 3 registers.

This is not sufficient but necessary to support any variant with more
than 4 UTP ports, like RTL8367S.

rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater
than 7.

Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:14:31 +00:00
Paolo Abeni
dacb5d8875 tcp: fix page frag corruption on page fault
Steffen reported a TCP stream corruption for HTTP requests
served by the apache web-server using a cifs mount-point
and memory mapping the relevant file.

The root cause is quite similar to the one addressed by
commit 20eb4f29b6 ("net: fix sk_page_frag() recursion from
memory reclaim"). Here the nested access to the task page frag
is caused by a page fault on the (mmapped) user-space memory
buffer coming from the cifs file.

The page fault handler performs an smb transaction on a different
socket, inside the same process context. Since sk->sk_allaction
for such socket does not prevent the usage for the task_frag,
the nested allocation modify "under the hood" the page frag
in use by the outer sendmsg call, corrupting the stream.

The overall relevant stack trace looks like the following:

httpd 78268 [001] 3461630.850950:      probe:tcp_sendmsg_locked:
        ffffffff91461d91 tcp_sendmsg_locked+0x1
        ffffffff91462b57 tcp_sendmsg+0x27
        ffffffff9139814e sock_sendmsg+0x3e
        ffffffffc06dfe1d smb_send_kvec+0x28
        [...]
        ffffffffc06cfaf8 cifs_readpages+0x213
        ffffffff90e83c4b read_pages+0x6b
        ffffffff90e83f31 __do_page_cache_readahead+0x1c1
        ffffffff90e79e98 filemap_fault+0x788
        ffffffff90eb0458 __do_fault+0x38
        ffffffff90eb5280 do_fault+0x1a0
        ffffffff90eb7c84 __handle_mm_fault+0x4d4
        ffffffff90eb8093 handle_mm_fault+0xc3
        ffffffff90c74f6d __do_page_fault+0x1ed
        ffffffff90c75277 do_page_fault+0x37
        ffffffff9160111e page_fault+0x1e
        ffffffff9109e7b5 copyin+0x25
        ffffffff9109eb40 _copy_from_iter_full+0xe0
        ffffffff91462370 tcp_sendmsg_locked+0x5e0
        ffffffff91462370 tcp_sendmsg_locked+0x5e0
        ffffffff91462b57 tcp_sendmsg+0x27
        ffffffff9139815c sock_sendmsg+0x4c
        ffffffff913981f7 sock_write_iter+0x97
        ffffffff90f2cc56 do_iter_readv_writev+0x156
        ffffffff90f2dff0 do_iter_write+0x80
        ffffffff90f2e1c3 vfs_writev+0xa3
        ffffffff90f2e27c do_writev+0x5c
        ffffffff90c042bb do_syscall_64+0x5b
        ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65

The cifs filesystem rightfully sets sk_allocations to GFP_NOFS,
we can avoid the nesting using the sk page frag for allocation
lacking the __GFP_FS flag. Do not define an additional mm-helper
for that, as this is strictly tied to the sk page frag usage.

v1 -> v2:
 - use a stricted sk_page_frag() check instead of reordering the
   code (Eric)

Reported-by: Steffen Froemer <sfroemer@redhat.com>
Fixes: 5640f76858 ("net: use a per task frag allocator")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:13:51 +00:00
Sebastian Andrzej Siewior
fd888e85fe net: Write lock dev_base_lock without disabling bottom halves.
The writer acquires dev_base_lock with disabled bottom halves.
The reader can acquire dev_base_lock without disabling bottom halves
because there is no writer in softirq context.

On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves (as in write_lock_bh()) and somewhere else with
enabled bottom halves (as by read_lock() in netstat_show()) followed by
disabling bottom halves (cxgb_get_stats() -> t4_wr_mbox_meat_timeout()
-> spin_lock_bh()). This is the reverse locking order.

All read_lock() invocation are from sysfs callback which are not invoked
from softirq context. Therefore there is no need to disable bottom
halves while acquiring a write lock.

Acquire the write lock of dev_base_lock without disabling bottom halves.

Reported-by: Pei Zhang <pezhang@redhat.com>
Reported-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:12:36 +00:00
Alain Volmat
0c21d02ca4 i2c: stm32f7: flush TX FIFO upon transfer errors
While handling an error during transfer (ex: NACK), it could
happen that the driver has already written data into TXDR
before the transfer get stopped.
This commit add TXDR Flush after end of transfer in case of error to
avoid sending a wrong data on any other slave upon next transfer.

Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-29 13:11:50 +01:00
Tom Parkin
07b8ca3792 net/l2tp: convert tunnel rwlock_t to rcu
Previously commit e02d494d2c ("l2tp: Convert rwlock to RCU") converted
most, but not all, rwlock instances in the l2tp subsystem to RCU.

The remaining rwlock protects the per-tunnel hashlist of sessions which
is used for session lookups in the UDP-encap data path.

Convert the remaining rwlock to rcu to improve performance of UDP-encap
tunnels.

Note that the tunnel and session, which both live on RCU-protected
lists, use slightly different approaches to incrementing their refcounts
in the various getter functions.

The tunnel has to use refcount_inc_not_zero because the tunnel shutdown
process involves dropping the refcount to zero prior to synchronizing
RCU readers (via. kfree_rcu).

By contrast, the session shutdown removes the session from the list(s)
it is on, synchronizes with readers, and then decrements the session
refcount.  Since the getter functions increment the session refcount
with the RCU read lock held we prevent getters seeing a zero session
refcount, and therefore don't need to use refcount_inc_not_zero.

Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:11:25 +00:00
Nicholas Piggin
e012c49998 powerpc/watchdog: help remote CPUs to flush NMI printk output
The printk layer at the moment does not seem to have a good way to force
flush printk messages that are created in NMI context, except in the
panic path.

NMI-context printk messages normally get to the console with irq_work,
but that won't help if the CPU is stuck with irqs disabled, as can be
the case for hard lockup watchdog messages.

The watchdog currently flushes the printk buffers after detecting a
lockup on remote CPUs, but they may not have processed their NMI IPI
yet by that stage, or they may have self-detected a lockup in which
case they won't go via this NMI IPI path.

Improve the situation by having NMI-context mark a flag if it called
printk, and have watchdog timer interrupts check if that flag was set
and try to flush if it was. Latency is not a big problem because we
were already stuck for a while, just need to try to make sure the
messages eventually make it out.

Depends-on: 5d5e4522a7 ("printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211119113146.752759-6-npiggin@gmail.com
2021-11-29 23:08:43 +11:00
Jianjun Wang
ab344fd43f PCI: mediatek-gen3: Disable DVFSRC voltage request
When the DVFSRC (dynamic voltage and frequency scaling resource collector)
feature is not implemented, the PCIe hardware will assert a voltage request
signal when exit from the L1 PM Substates to request a specific Vcore
voltage, but cannot receive the voltage ready signal, which will cause
the link to fail to exit the L1 PM Substates.

Disable DVFSRC voltage request by default, we need to find a common way to
enable it in the future.

Link: https://lore.kernel.org/r/20211015063602.29058-1-jianjun.wang@mediatek.com
Fixes: d3bf75b579 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Tested-by: Qizhong Cheng <qizhong.cheng@mediatek.com>
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-29 12:08:17 +00:00
Vincent Whitchurch
f8e7dfd6fd net: stmmac: Avoid DMA_CHAN_CONTROL write if no Split Header support
The driver assumes that split headers can be enabled/disabled without
stopping/starting the device, so it writes DMA_CHAN_CONTROL from
stmmac_set_features().  However, on my system (IP v5.10a without Split
Header support), simply writing DMA_CHAN_CONTROL when DMA is running
(for example, with the commands below) leads to a TX watchdog timeout.

 host$ socat TCP-LISTEN:1024,fork,reuseaddr - &
 device$ ethtool -K eth0 tso off
 device$ ethtool -K eth0 tso on
 device$ dd if=/dev/zero bs=1M count=10 | socat - TCP4:host:1024
 <tx watchdog timeout>

Note that since my IP is configured without Split Header support, the
driver always just reads and writes the same value to the
DMA_CHAN_CONTROL register.

I don't have access to any platforms with Split Header support so I
don't know if these writes to the DMA_CHAN_CONTROL while DMA is running
actually work properly on such systems.  I could not find anything in
the databook that says that DMA_CHAN_CONTROL should not be written when
the DMA is running.

But on systems without Split Header support, there is in any case no
need to call enable_sph() in stmmac_set_features() at all since SPH can
never be toggled, so we can avoid the watchdog timeout there by skipping
this call.

Fixes: 8c6fc097a2 ("net: stmmac: gmac4+: Add Split Header support")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:08:05 +00:00
David S. Miller
275f37ea50 Merge branch 'mvneta-next'
Maxime Chevallier says:

====================
net: mvneta: mqprio cleanups and shaping support

This is the second version of the series that adds some improvements to the
existing mqprio implementation in mvneta, and adds support for
egress shaping offload.

The first 3 patches are some minor cleanups, such as using the
tc_mqprio_qopt_offload structure to get access to more offloading
options, cleaning the logic to detect whether or not we should offload
mqprio setting, and allowing to have a 1 to N mapping between TCs and
queues.

The last patch adds traffic shaping offload, using mvneta's per-queue
token buckets, allowing to limit rates from 10Kbps up to 5Gbps with
10Kbps increments.

This was tested only on an Armada 3720, with traffic up to 2.5Gbps.

Changes since V1 fixes the build for 32bits kernels, using the right
div helpers as suggested by Jakub.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:05:52 +00:00
Maxime Chevallier
2551dc9e39 net: mvneta: Add TC traffic shaping offload
The mvneta controller is able to do some tocken-bucket per-queue traffic
shaping. This commit adds support for setting these using the TC mqprio
interface.

The token-bucket parameters are customisable, but the current
implementation configures them to have a 10kbps resolution for the
rate limitation, since it allows to cover the whole range of max_rate
values from 10kbps to 5Gbps with 10kbps increments.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:05:52 +00:00
Maxime Chevallier
e9f7099d07 net: mvneta: Allow having more than one queue per TC
The current mqprio implementation assumed that we are only using one
queue per TC. Use the offset and count parameters to allow using
multiple queues per TC. In that case, the controller will use a standard
round-robin algorithm to pick queues assigned to the same TC, with the
same priority.

This only applies to VLAN priorities in ingress traffic, each TC
corresponding to a vlan priority.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:05:52 +00:00
Maxime Chevallier
e7ca75fe66 net: mvneta: Don't force-set the offloading flag
The qopt->hw flag is set by the TC code according to the offloading mode
asked by user. Don't force-set it in the driver, but instead read it to
make sure we do what's asked.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:05:52 +00:00
Maxime Chevallier
75fa71e3ac net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio configuration
The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
that allows passing extra parameters, such as traffic shaping. This commit
converts the current mqprio code to that new struct.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:05:52 +00:00
Matti Vaittinen
2f746ea6e6 MAINTAINERS: bd70528: Drop ROHM BD70528 drivers
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC.

Ease the maintenance burden and drop the driver.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/90b0565c0eb9429b0962f08d45292a5a9ebe5cea.1637066805.git.matti.vaittinen@fi.rohmeurope.com
2021-11-29 12:04:32 +00:00
Matti Vaittinen
306456c21c mfd: bd70528: Drop BD70528 support
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/cf7dfd98b3403ad363b2b48b57bdbfd57a6416cb.1637066805.git.matti.vaittinen@fi.rohmeurope.com
2021-11-29 12:04:27 +00:00
Matti Vaittinen
da53cc634c gpio: bd70528 Drop BD70528 support
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/4eff6bd5eff8afc137dd8c1697cb5c6b2e3aacd2.1637066805.git.matti.vaittinen@fi.rohmeurope.com
2021-11-29 12:04:22 +00:00
Matti Vaittinen
81a7297c5b dt-bindings: mfd: regulator: Drop BD70528 support
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/64c88990270d9a22508446ef2fe3b6a2622a0b01.1637066805.git.matti.vaittinen@fi.rohmeurope.com
2021-11-29 12:04:13 +00:00
Yang Yingliang
2f7ed29f2c net: mdio: ipq8064: replace ioremap() with devm_ioremap()
Use devm_ioremap() instead of ioremap() to avoid iounmap() missing.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29 12:02:49 +00:00
Christophe Leroy
57dd3a7bdf powerpc: Don't bother about .data..Lubsan sections
Since commit 9a427556fb ("vmlinux.lds.h: catch compound literals
into data and BSS") .data..Lubsan sections are taken into account
in DATA_MAIN which is included in DATA_DATA macro.

No need to take care of them anymore in powerpc vmlinux.lds.S

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3eb14570612eef17e01bb67f14a4450136001794.1637840601.git.christophe.leroy@csgroup.eu
2021-11-29 22:49:29 +11:00
Christophe Leroy
cdc81aece8 powerpc/ptdump: Fix display a BAT's size unit
We have wrong units on BAT's sizes (G instead of M, M instead of ...)

	---[ Instruction Block Address Translation ]---
	0: 0xc0000000-0xc03fffff 0x00000000         4G Kernel   x     m
	1: 0xc0400000-0xc05fffff 0x00400000         2G Kernel   x     m
	2: 0xc0600000-0xc06fffff 0x00600000         1G Kernel   x     m
	3: 0xc0700000-0xc077ffff 0x00700000       512M Kernel   x     m
	4: 0xc0780000-0xc079ffff 0x00780000       128M Kernel   x     m
	5: 0xc07a0000-0xc07bffff 0x007a0000       128M Kernel   x     m
	6:         -
	7:         -

This is because pt_dump_size() expects a size in Kbytes but
bat_show_603() gives the size in bytes.

To avoid risk of confusion, change pt_dump_size() to take bytes.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f16c30f5c9185a63335322cf1a8b22f189d335ef.1637922595.git.christophe.leroy@csgroup.eu
2021-11-29 22:49:29 +11:00
Christophe Leroy
7dfbfb87c2 powerpc/ftrace: Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on PPC32
Unlike PPC64, PPC32 doesn't require any special compiler option
to get _mcount() call not clobbering registers.

Provide ftrace_regs_caller() and ftrace_regs_call() and activate
HAVE_DYNAMIC_FTRACE_WITH_REGS.

That's heavily copied from ftrace_64_mprofile.S

For the time being leave livepatching aside, it will come with
following patch.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1862dc7719855cc2a4eec80920d94c955877557e.1635423081.git.christophe.leroy@csgroup.eu
2021-11-29 22:49:29 +11:00
Christophe Leroy
c93d4f6ecf powerpc/ftrace: Add module_trampoline_target() for PPC32
module_trampoline_target() is used by __ftrace_modify_call().

Implement it for PPC32 so that CONFIG_DYNAMIC_FTRACE_WITH_REGS
can be activated on PPC32 as well.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42345f464fb465f0fc76f3090e250be8fc1729f0.1635423081.git.christophe.leroy@csgroup.eu
2021-11-29 22:49:29 +11:00
Christophe Leroy
88670fdb26 powerpc/ftrace: No need to read LR from stack in _mcount()
All functions calling _mcount do it exactly the same way, with the
following sequence of instructions:

	c07de788:       7c 08 02 a6     mflr    r0
	c07de78c:       90 01 00 04     stw     r0,4(r1)
	c07de790:       4b 84 13 65     bl      c001faf4 <_mcount>

Allthough LR is pushed on stack, it is still in r0 while entering
_mcount().

Function arguments are in r3-r10, so r11 and r12 are still available
at that point.

Do like PPC64 and use r12 to move LR into CTR, so that r0 is preserved
and doesn't need to be restored from the stack.

While at it, bring back the EXPORT_SYMBOL at the end of _mcount.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24a3ba7db388537c44a038026f926d885372e6d3.1635423081.git.christophe.leroy@csgroup.eu
2021-11-29 22:49:29 +11:00
Michael Ellerman
ab85a27395 powerpc: Mark probe_machine() __init and static
Prior to commit b1923caa6e ("powerpc: Merge 32-bit and 64-bit
setup_arch()") probe_machine() was called from setup_32/64.c and lived
in setup-common.c. But now it's only called from setup-common.c so it
can be static and __init, and we don't need the declaration in
machdep.h either.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-6-mpe@ellerman.id.au
2021-11-29 22:49:26 +11:00
Michael Ellerman
a4ac0d249a powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING
setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.

Fixes the following W=1 warning when CONFIG_PROFILING=n:
  linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au
2021-11-29 22:49:23 +11:00
Michael Ellerman
ff47a95d1a powerpc/mm: Move tlbcam_sz() and make it static
Building with W=1 we see a warning:
  linux/arch/powerpc/mm/nohash/fsl_book3e.c:63:15: error: no previous prototype for ‘tlbcam_sz’

tlbcam_sz() is not used outside this file, so we can make it static.
However it's only used inside #ifdef CONFIG_PPC32, so move it within
that ifdef, otherwise we would get a defined but not used error.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-4-mpe@ellerman.id.au
2021-11-29 22:49:20 +11:00
Michael Ellerman
d9150d5bb5 powerpc/85xx: Make c293_pcie_pic_init() static
To fix the W=1 warning:
  linux/arch/powerpc/platforms/85xx/c293pcie.c:22:13: error: no previous prototype for ‘c293_pcie_pic_init’

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-3-mpe@ellerman.id.au
2021-11-29 22:49:17 +11:00
Michael Ellerman
84a61fb43f powerpc/85xx: Make mpc85xx_smp_kexec_cpu_down() static
To fix the W=1 warning:
  arch/powerpc/platforms/85xx/smp.c:369:6: error: no previous prototype for ‘mpc85xx_smp_kexec_cpu_down’

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-2-mpe@ellerman.id.au
2021-11-29 22:49:14 +11:00
Michael Ellerman
4ea9e321c2 powerpc/85xx: Fix no previous prototype warning for mpc85xx_setup_pmc()
Fixes the following W=1 warning:
  arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c:89:12: warning: no previous prototype for 'mpc85xx_setup_pmc'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-1-mpe@ellerman.id.au
2021-11-29 22:49:09 +11:00
Nicholas Piggin
2eafc4748b powerpc: select CPUMASK_OFFSTACK if NR_CPUS >= 8192
Some core kernel code starts to go beyond the 2048 byte stack size
warning at NR_CPUS=8192, so select CPUMASK_OFFSTACK in that case.
x86 does similarly for very large NR_CPUS.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105035042.1398309-2-npiggin@gmail.com
2021-11-29 22:48:32 +11:00
Nicholas Piggin
b350111bf7 powerpc: remove cpu_online_cores_map function
This function builds the cores online map with on-stack cpumasks which
can cause high stack usage with large NR_CPUS.

It is not used in any performance sensitive paths, so instead just check
for first thread sibling.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105035042.1398309-1-npiggin@gmail.com
2021-11-29 22:48:32 +11:00
Geert Uytterhoeven
4e1fc0a480 MIPS: CPS: Use bitfield helpers
Use the FIELD_GET() helper, instead of open-coding the same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-29 12:43:06 +01:00
Geert Uytterhoeven
9d348f6b92 MIPS: CPC: Use bitfield helpers
Use the FIELD_PREP() helper, instead of open-coding the same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-29 12:42:57 +01:00
Jason Wang
13166af248 MIPS: Remove a repeated word in a comment
The repeated word `the' in a comment is redundant, thus one
of them was removed from the comment.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-29 12:42:30 +01:00