The only user of the io_context for IO is BFQ, yet we put the checking
and logic of it into the normal IO path.
Put the creation into blk_mq_sched_assign_ioc(), and have BFQ use that
helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is essentially never used, yet it's about 1/3rd of the total
queue size. Allocate it when needed, and don't embed it in the queue.
Kill the queue flag for this while at it, since we can just check the
assigned pointer now.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need to write to the bio if:
1) No ioprio value has ever been assigned to the blkcg
2) We wouldn't anyway, depending on bio and blkcg IO priority
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_submit_bio has two different plug cases, one that uses full
plugging and a limited plugging one.
The limited plugging case is only used for a corner case that does
not matter in real life:
- no ->commit_rqs (so not NVMe)
- no shared tags (so not SCSI)
- not rotational (so no old disk or floppy driver)
- must have multiple queues (so no eMMC)
Remove the limited merging case and all the related junk to simplify
blk_mq_submit_bio and the functions called from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211123160443.1315598-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hidden gendisks can't be opened using blkdev_get_*, so we can't really
reach any of the partition scanning paths or partitioning ioctls except
for the initial partition scan from add_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This flag is not set directly anywhere and only inherited from
GENHD_FL_HIDDEN. Just check for GENHD_FL_HIDDEN instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This manually reverts 07b652cdbec3 ("mmc: card: Don't show eMMC RPMB and
BOOT areas in /proc/partitions"). Based on the commit description that
change was purely cosmetic. mmc is the last driver that sets this
flag and thus prevents it from being removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20211122130625.1136848-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This manually reverts commit 27290b469051 ("null_blk: suppress invalid
partition info"). The message in that commit log can't appearch as
the flag is never checked during probing, and there is no good reason
to treat null_blk special in /proc/partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The GENHD_FL_NO_PART_SCAN controls more than just partitions canning,
so rename it to GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20211122130625.1136848-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disk_max_parts never returns 0 given that ->minors for devices not using
the extended dev_t must be non-zero, and disk_max_parts always returns
DISK_MAX_PARTS for the latter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
GENHD_FL_CD marks a gendisk as a vaguely CD-ROM like device.
Besides being used internally inside of sunvdc.c an xen-blkfront it
is used by xen-blkback as a hint to claim a device exported to a
guest is a CD-ROM like device. Just check for disk->cdi instead
which is the right indicator for "real" CD-ROM or DVD drivers. This
will miss the paravirtualized guest drivers, but those make little
sense to report anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE is all about the event reporting
mechanism, so move it to the event_flags field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The flag to indicate an unlocked native capacity is dynamic state,
not a driver capability flag, so move it to disk->state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All request based code is in the blk-mq files now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function is only used by the request completion path. Factor out
a blk_status_to_str to keep blk_errors private in blk-core.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_dump_rq_flags deals with a request, so move it to blk-mq.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These are only used for request based I/O, so move them where they are
used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep all the request based code together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_rq_init deals with a request structure, so move it to blk-mq.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep all the request based code together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move blk_mq_flush_plug_list and blk_mq_plug_issue_direct down in blk-mq.c
to prepare for marking blk_mq_request_issue_directly static without the
need of a forward declaration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All this code is tightly coupled to the blk-mq core, so move it
there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-4-hch@lst.de
[axboe: remove doc generation for blk-exec.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function is trivial, and flush_dcache_page is always defined, so
just open code it in the 2.5 callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_rq_err_bytes is only used by the scsi midlayer, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If 'of_device_get_match_data()' fails, previous 'pm_runtime_get_sync()/
pm_runtime_enable()' should be undone.
To fix it, the easiest is to move this block of code before the memory
allocations and the pm_runtime_xxx calls.
Link: https://lore.kernel.org/r/4d03c636193f64907c8dacb17fa71ed05fd5f60c.1636220582.git.christophe.jaillet@wanadoo.fr
Fixes: b89ff41025 ("PCI: qcom: Replace ops with struct pcie_cfg in pcie match data")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Document Samsung Exynos850 compatible for system registers.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211126230620.478-1-semen.protsenko@linaro.org
Enable the I2C bus mode if I2C_FUNC_I2C is set. Based on da6093 commit:
"586478bfc9 mfd: da9063: Support SMBus and I2C mode"
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211124065119.2514872-1-andrej.picej@norik.com
This device is found in the MacBookPro16,2, and as the MacBookPro16,1 is
from the same generation of MacBooks and has a UART with bxt_uart_info,
it was incorrectly assumed that the MacBookPro16,2's UART would have the
same info.
This led to the wrong clock speed being used, and the Bluetooth
controller exposed by the UART receiving and sending random data, which
was incorrectly assumed to be an issue with the Bluetooth stuff, not an
error with the UART side of things.
Changing the info to spt_uart_info changes the clock speed and makes it
send and receive data correctly.
Fixes: ddb1ada416 ("mfd: intel-lpss: Add support for MacBookPro16,2 ICL-N UART")
Signed-off-by: Orlando Chamberlain <redecorating@protonmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211124091846.11114-1-redecorating@protonmail.com
The runtime PM callback may be called as soon as the runtime PM facility
is enabled and activated. It means that ->suspend() may be called before
we finish probing the device in the ACPI case. Hence, NULL pointer
dereference:
intel-lpss INT34BA:00: IRQ index 0 not found
BUG: kernel NULL pointer dereference, address: 0000000000000030
...
Workqueue: pm pm_runtime_work
RIP: 0010:intel_lpss_suspend+0xb/0x40 [intel_lpss]
To fix this, first try to register the device and only after that enable
runtime PM facility.
Fixes: 4b45efe852 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Reported-by: Orlando Chamberlain <redecorating@protonmail.com>
Reported-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211101190008.86473-1-andriy.shevchenko@linux.intel.com
In TI's reference manual description for the `AFE_Pen_Ctrl' bit-field
of the TSC's CTRL register, there is no mention of 8-wire touchscreens.
Even commit f0933a60d1 ("mfd: ti_am335x_tscadc: Update logic in CTRL
register for 5-wire TS") says that the value of this bit-field must be
the same for 4-wire and 8-wire touchscreens. So let's remove the
CNTRLREG_TSC_8WIRE macro to avoid misunderstandings.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211125224642.21011-5-dariobin@libero.it
Add support of sub-functions disabling. It allows one to define
an stmpe sub-function device in devicetree, but keep it disabled.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211027082155.206449-1-francesco.dolcini@toradex.com
Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation
mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might
be connected critical devices (like PMIC) which on suspend/resume should
be suspended/resumed at the end/beginning. i2c uses
.suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom
to use .resume_noirq as it should be resumed before the embedded IPs.
Otherwise the embedded devices might behave badly.
Fixes: 7fdec11015 ("atmel_flexcom: Support resuming after a chip reset")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211028135138.3481166-3-claudiu.beznea@microchip.com
Convert the ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit
(PMIC) Device Tree binding documentation to json-schema.
Make the "regulators" subnode optional, as not all users describe the
regulators.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/76fdd209e6a2dada7ff50b8ad03eb14e7f3547a6.1635338031.git.geert+renesas@glider.be
Add new IDs of the Intel Lakefield chip to the list of supported
devices.
Signed-off-by: Ed Schaller <schallee@darkmist.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211123180114.GA4747@darkmist.net
Convert the regulators of Maxim MAX77686 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211125074826.7947-2-krzysztof.kozlowski@canonical.com
A pinctrl handle is used to setup a pull-up on the stusb1600 IRQ pin (that
is open drain).
When in ANALOG state, no pull-up can be applied in the GPIO HW controller,
still the setting is done into the register. The pull-up is effective
currently, only when the GPIO IRQ is requested. The correct setting is to
use directly the GPIO, instead of ANALOG state.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Once tcp small queue check failed in tcp_small_queue_check(), the
throughput of tcp will be limited, and it's hard to distinguish
whether it is out of tcp congestion control.
Add statistics of LINUX_MIB_TCPSMALLQUEUEFAILURE for this scene.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.
Fixes: e44ef4e451 ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When link modes were initially added in commit 2c76267943
("net/mlx4_en: Use PTYS register to query ethtool settings") and
later updated for the new ethtool API in commit 3d8f7cc78d
("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT
link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR.
It looks like these got picked to represent other modes since nothing
better was available.
Switch to using more specific link modes added in commit 5711a98221
("net: ethtool: add support for 1000BaseX and missing 10G link modes").
Tested with MCX311A-XCAT connected via DAC.
Before:
% sudo ethtool enp3s0
Settings for enp3s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 1000baseKX/Full
10000baseKR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
With this change:
% sudo ethtool enp3s0
Settings for enp3s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseX/Full
10000baseCR/Full
10000baseSR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 1000baseX/Full
10000baseCR/Full
10000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Signed-off-by: Erik Ekman <erik@kryo.se>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Foster says:
====================
update seville to use shared MDIO driver
This patch set exposes and utilizes the shared MDIO bus in
drivers/net/mdio/msio-mscc-miim.c
v3:
* Fix errors using uninitilized "dev" inside the probe function.
* Remove phy_regmap from the setup function, since it currently
isn't used
* Remove GCB_PHY_PHY_CFG definition from ocelot.h - it isn't used
yet...
v2:
* Error handling (thanks Andrew Lunn)
* Fix logic errors calling mscc_miim_setup during patch 1/3 (thanks
Jakub Kicinski)
* Remove unnecessary felix_mdio file (thanks Vladimir Oltean)
* Pass NULL to mscc_miim_setup instead of GCB_PHY_PHY_CFG, since the
phy reset isn't handled at that point of the Seville driver (patch
3/3)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>