Commit graph

1,105,074 commits

Author SHA1 Message Date
shaoyunl
271fd38ce5 drm/amdgpu: move kfd post_reset out of reset_sriov function
Fixes: 9f4f2c1a35 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")

For sriov XGMI  configuration, the host driver will handle the hive reset,
so in guest side, the reset_sriov only be called once on one device. This will
make kfd post_reset unblanced with kfd pre_reset since kfd pre_reset already
been moved out of reset_sriov function. Move kfd post_reset out of reset_sriov
function to make them balance .

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 15:08:58 -05:00
Yi-Ling Chen
2da8f0beec drm/amd/display: Fixed DSC would not PG after removing DSC stream
[WHY]
Due to pass the wrong parameter down to the enable_stream_gating(),
it would cause the DSC of the removing stream would not be PG.

[HOW]
To pass the correct parameter down th the enable_stream_gating().

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 15:07:39 -05:00
Nicholas Kazlauskas
2276ee6d1b drm/amd/display: Reset link encoder assignments for GPU reset
[Why]
A warning appears in the log on GPU reset for
link_enc_cfg_link_encs_assign for the following condition:

ASSERT(state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].valid == false);

This is not expected behavior and may result in link encoders being
incorrectly assigned.

[How]
The dc->current_state is backed up into dm->cached_dc_state before
we commit 0 streams.

DC will clear link encoder assignments on the real state but the
changes won't propagate over to the copy we made before the
0 streams commit.

DC expects that link encoder assignments are *not* valid
when committing a state, so as a workaround it needs to be cleared
before passing it back into DC.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 15:06:21 -05:00
Nicholas Kazlauskas
21431f70f6 drm/amd/display: Set plane update flags for all planes in reset
[Why]
We're only setting the flags on stream[0]'s planes so this logic fails
if we have more than one stream in the state.

This can cause a page flip timeout with multiple displays in the
configuration.

[How]
Index into the stream_status array using the stream index - it's a 1:1
mapping.

Fixes: cdaae8371a ("drm/amd/display: Handle GPU reset for DC block")

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 15:05:44 -05:00
Nicholas Kazlauskas
6eff272dbe drm/amd/display: Fix DPIA outbox timeout after GPU reset
[Why]
The HW interrupt gets disabled after GPU reset so we don't receive
notifications for HPD or AUX from DMUB - leading to timeout and
black screen with (or without) DPIA links connected.

[How]
Re-enable the interrupt after GPU reset like we do for the other
DC interrupts.

Fixes: 81927e2808 ("drm/amd/display: Support for DMUB AUX")

Reviewed-by: Jude Shih <Jude.Shih@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 15:04:26 -05:00
xinhui pan
4eb6bb649f drm/amdgpu: Fix double free of dmabuf
amdgpu_amdkfd_gpuvm_free_memory_of_gpu drop dmabuf reference increased in
amdgpu_gem_prime_export.
amdgpu_bo_destroy drop dmabuf reference increased in
amdgpu_gem_prime_import.

So remove this extra dma_buf_put to avoid double free.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 15:04:05 -05:00
Felix Kuehling
d3a21f7e35 drm/amdgpu: Fix MMIO HDP flush on SRIOV
Disable HDP register remapping on SRIOV and set rmmio_remap.reg_offset
to the fixed address of the VF register for hdp_v*_flush_hdp.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 15:02:25 -05:00
Alex Deucher
1f57925493 drm/amd/display: update bios scratch when setting backlight
Update the bios scratch register when updating the backlight
level.  Some platforms apparently read this scratch register
and do additional operations in their hotkey handlers.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1518
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:54 -05:00
Alex Deucher
081664ef3e drm/amdgpu/pm: fix powerplay OD interface
The overclocking interface currently appends data to a
string.  Revert back to using sprintf().

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1774
Fixes: 6db0c87a0a ("amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit")
Acked-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Lijo Lazar
6ff53495ce drm/amdgpu: Skip ASPM programming on aldebaran
There is no need for additional programming, keep the default settings.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Yang Wang
cc7818d709 drm/amdgpu: fix byteorder error in amdgpu discovery
fix some byteorder issues about amdgpu discovery.
This will result in running errors on the big end system. (e.g:MIPS)

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Philip Yang
23eb49251b drm/amdgpu: enable Navi retry fault wptr overflow
If xnack is on, VM retry fault interrupt send to IH ring1, and ring1
will be full quickly. IH cannot receive other interrupts, this causes
deadlock if migrating buffer using sdma and waiting for sdma done
while handling retry fault.

Remove VMC from IH storm client, enable ring1 write pointer
overflow, then IH will drop retry fault interrupts and be able to receive
other interrupts while driver is handling retry fault.

IH ring1 write pointer doesn't writeback to memory by IH, and ring1
write pointer recorded by self-irq is not updated, so always read
the latest ring1 write pointer from register.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Philip Yang
71ee9236ab drm/amdgpu: enable Navi 48-bit IH timestamp counter
By default this timestamp is 32 bit counter. It gets overflowed in
around 10 minutes.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Philip Yang
2e4477282c drm/amdkfd: simplify drain retry fault
unmap range always increase atomic svms->drain_pagefaults to simplify
both parent range and child range unmap, page fault handle ignores the
retry fault if svms->drain_pagefaults is set to speed up interrupt
handling. svm_range_drain_retry_fault restart draining if another
range unmap from cpu.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Philip Yang
7ad153db58 drm/amdkfd: handle VMA remove race
VMA may be removed before unmap notifier callback, and deferred list
work remove range, return success for this special case as we are
handling stale retry fault.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Philip Yang
a0c55ecee1 drm/amdkfd: process exit and retry fault race
kfd_process_wq_release drain retry fault to ensure no retry fault comes
after removing kfd process from the hash table, otherwise svm page fault
handler will fail to recover the fault and dump GPU vm fault log.

Refactor deferred list work to get_task_mm and take mmap write lock
to handle all ranges, and avoid mm is gone while inserting mmu notifier.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Philip Yang
514f4a99c7 drm/amdgpu: IH process reset count when restart
Otherwise when IH process restart, count is zero, the loop will
not exit to wake_up_all after processing AMDGPU_IH_MAX_NUM_IVS
interrupts.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Surbhi Kakarya
3a50403f8b drm/amd/pm: add new fields for Sienna Cichlid.
Fill voltage fields in metrics table.

Signed-off-by: Surbhi Kakarya <Surbhi.Kakarya@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Luben Tuikov
e771d71d8d drm/amd/pm: Print the error on command submission
Print the error on command submission immediately after submitting to
the SMU. This is rate-limited. It helps to immediately know there was an
error on command submission, rather than leave it up to clients to report
the error, as sometimes they do not.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Luben Tuikov
dc78fea1e7 drm/amd/pm: Sienna: Print failed BTC
Add a print in sienna_cichlid_run_btc() to help debug and to mirror other
platforms, as no print is present in the caller, smu_smc_hw_setup().

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Luben Tuikov
ca4b32bb2d drm/amd/pm: Add debug prints
Add prints where there are none and none are printed in the callee.

Remove the word "previous" from comment and print to make it shorter and
avoid confusion in various prints.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Evan Quan
1223c15c78 drm/amdgpu: update the domain flags for dumb buffer creation
After switching to generic framebuffer framework, we rely on the
->dumb_create routine for frame buffer creation. However, the
different domain flags used are not optimal. Add the contiguous
flag to directly allocate the scanout BO as one linear buffer.

Fixes: 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Ramesh Errabolu
37ba5bbc89 drm/amdgpu: Declare Unpin BO api as static
Fixes warning report from kernel test robot

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Alex Deucher
7b37c7f8f5 drm/amdgpu/gfx9: switch to golden tsc registers for renoir+
Renoir and newer gfx9 APUs have new TSC register that is
not part of the gfxoff tile, so it can be read without
needing to disable gfx off.

Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:53 -05:00
Alex Deucher
f75de84475 drm/amdgpu/gfx10: add wraparound gpu counter check for APUs as well
Apply the same check we do for dGPUs for APUs as well.

Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
shaoyunl
4f30d920d1 drm/amdgpu: move kfd post_reset out of reset_sriov function
Fixes: 9f4f2c1a35 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")

For sriov XGMI  configuration, the host driver will handle the hive reset,
so in guest side, the reset_sriov only be called once on one device. This will
make kfd post_reset unblanced with kfd pre_reset since kfd pre_reset already
been moved out of reset_sriov function. Move kfd post_reset out of reset_sriov
function to make them balance .

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Aric Cyr
8ab1d0923c drm/amd/display: 3.2.163
This version brings along the following:
- FW promotion to 0.0.94
- Enable seamless boot for DCN301
- Improvements in bandwidth validation
- Fixes in flags update, link encoder assignments, DSC, ODM combine and more

Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Anthony Koo
7f41c66070 drm/amd/display: [FW Promotion] Release 0.0.94
[Why & How]
 - Remove tick count definition since it can be different
   per HW revision

Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Martin Leung
11dff0e871 drm/amd/display: add else to avoid double destroy clk_mgr
[Why & How]
when changing some code we accidentally
changed else if-> if. reverting that.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
sungwang
8acd975450 drm/amd/display: Fix ODM combine issue with fast boot
[Why]
When systme power up and eDP lit up by VBIOS,
in the core_link_enable_stream(),
the function will early return due to apply
apply_edp_fast_boot_optimization,
resulting the DP_PIXEL_COMBINE cannot get set
in enc3_dp_set_odm_combine.

[How]
Check ODM PIPE to avoid early return.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Danny Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Yi-Ling Chen
ae6c9601da drm/amd/display: Fixed DSC would not PG after removing DSC stream
[WHY]
Due to pass the wrong parameter down to the enable_stream_gating(),
it would cause the DSC of the removing stream would not be PG.

[HOW]
To pass the correct parameter down th the enable_stream_gating().

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Nevenko Stupar
a5e00e1135 drm/amd/display: Display object info table changes
[Why]
display_object_info_table_v1_5 with atom_display_object_path_v3
will be used.

[How]
Add bios parser support for display_object_info_table_v1_5 with
atom_display_object_path_v3 for all existing, in use bios records
as well as for new records:
ATOM_CONNECTOR_CAP_RECORD_TYPE,
ATOM_CONNECTOR_SPEED_UPTO and
ATOM_BRACKET_LAYOUT_V2_RECORD_TYPE.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Mikita Lipski
16f0c500f0 drm/amd/display: fix accidental casting enum to bool
[why/how]
Fixing -Wint-in-bool-context Clang Build Failure

Reviewed-by: Nicholas Choi <Nicholas.Choi@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Sung Joon Kim
0bb2455585 drm/amd/display: retain/release at proper places in link_enc assignment
[why]
Need to keep track of number of
references to stream pointer.

[how]
Call stream retain/release whenever
necessary in link_enc table assignment
sequence.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Zhan Liu
4f48034b7f drm/amd/display: Rename dcn_validate_bandwidth to dcn10_validate_bandwidth
[Why]
Rename function name so it aligns with other resource
function names being used by dcn10.

[How]
Rename function name for consistency.

Reviewed-by: Ahmad Othman <Ahmad.Othman@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Nicholas Kazlauskas
6d63fcc2a3 drm/amd/display: Reset link encoder assignments for GPU reset
[Why]
A warning appears in the log on GPU reset for
link_enc_cfg_link_encs_assign for the following condition:

ASSERT(state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].valid == false);

This is not expected behavior and may result in link encoders being
incorrectly assigned.

[How]
The dc->current_state is backed up into dm->cached_dc_state before
we commit 0 streams.

DC will clear link encoder assignments on the real state but the
changes won't propagate over to the copy we made before the
0 streams commit.

DC expects that link encoder assignments are *not* valid
when committing a state, so as a workaround it needs to be cleared
before passing it back into DC.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Guo, Bing
f53e191e2b drm/amd/display: fixed an error related to 4:2:0/4:2:2 DSC
[Why]
OPTC_BYTES_PER_PIXEL calculation for 4:2:2 and 4:2:0 could have error.

[How]
Change to use following formula:
OPTC_DSC_BYTES_PER_PIXEL = ceiling((chunk size * 2^28) / slice width)

v2: squash in 64 bit divide fix (Alex)

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24 14:06:52 -05:00
Pavel Begunkov
5562a8d71a io_uring: disable drain with cqe skip
Current IOSQE_IO_DRAIN implementation doesn't work well with CQE
skipping and it's not allowed, otherwise some requests might be not
executed until the ring is destroyed and the userspace would hang.

Let's fail all drain requests after seeing IOSQE_CQE_SKIP_SUCCESS at
least once. All drained requests prior to that will get run normally,
so there should be no stalls. However, even though such mixing wouldn't
lead to issues at the moment, it's still not allowed as the behaviour
may change.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bcf7164f8bf3eb54b7bb7b4fd119907fa4d4d43b.1636559119.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-24 11:17:53 -07:00
Pavel Begunkov
3d4aeb9f98 io_uring: don't spinlock when not posting CQEs
When no of queued for the batch completion requests need to post an CQE,
see IOSQE_CQE_SKIP_SUCCESS, avoid grabbing ->completion_lock and other
commit/post.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8d4b4a08bca022cbe19af00266407116775b3e4d.1636559119.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-24 11:17:53 -07:00
Pavel Begunkov
04c76b41ca io_uring: add option to skip CQE posting
Emitting a CQE is expensive from the kernel perspective. Often, it's
also not convenient for the userspace, spends some cycles on processing
and just complicates the logic. A similar problems goes for linked
requests, where we post an CQE for each request in the link.

Introduce a new flags, IOSQE_CQE_SKIP_SUCCESS, trying to help with it.
When set and a request completed successfully, it won't generate a CQE.
When fails, it produces an CQE, but all following linked requests will
be CQE-less, regardless whether they have IOSQE_CQE_SKIP_SUCCESS or not.
The notion of "fail" is the same as for link failing-cancellation, where
it's opcode dependent, and _usually_ result >= 0 is a success, but not
always.

Linked timeouts are a bit special. When the requests it's linked to was
not attempted to be executed, e.g. failing linked requests, it follows
the description above. Otherwise, whether a linked timeout will post a
completion or not solely depends on IOSQE_CQE_SKIP_SUCCESS of that
linked timeout request. Linked timeout never "fail" during execution, so
for them it's unconditional. It's expected for users to not really care
about the result of it but rely solely on the result of the master
request. Another reason for such a treatment is that it's racy, and the
timeout callback may be running awhile the master request posts its
completion.

use case 1:
If one doesn't care about results of some requests, e.g. normal
timeouts, just set IOSQE_CQE_SKIP_SUCCESS. Error result will still be
posted and need to be handled.

use case 2:
Set IOSQE_CQE_SKIP_SUCCESS for all requests of a link but the last,
and it'll post a completion only for the last one if everything goes
right, otherwise there will be one only one CQE for the first failed
request.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0220fbe06f7cf99e6fc71b4297bb1cb6c0e89c2c.1636559119.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-24 11:17:53 -07:00
Pavel Begunkov
913a571aff io_uring: clean cqe filling functions
Split io_cqring_fill_event() into a couple of more targeted functions.
The first on is io_fill_cqe_aux() for completions that are not
associated with request completions and doing the ->cq_extra accounting.
Examples are additional CQEs from multishot poll and rsrc notifications.

The second is io_fill_cqe_req(), should be called when it's a normal
request completion. Nothing more to it at the moment, will be used in
later patches.

The last one is inlined __io_fill_cqe() for a finer grained control,
should be used with caution and in hottest places.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/59a9117a4a44fc9efcf04b3afa51e0d080f5943c.1636559119.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-24 11:17:53 -07:00
Andreas Gruenbacher
5ad448ce29 iomap: iomap_read_inline_data cleanup
Change iomap_read_inline_data to return 0 or an error code; this
simplifies the callers.  Add a description.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[djwong: document the return value of iomap_read_inline_data explicitly]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-24 10:15:47 -08:00
Christoph Hellwig
1090427bf1 xfs: remove xfs_inew_wait
With the remove of xfs_dqrele_all_inodes, xfs_inew_wait and all the
infrastructure used to wake the XFS_INEW bit waitqueue is unused.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 777eb1fa85 ("xfs: remove xfs_dqrele_all_inodes")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-24 10:06:02 -08:00
Yang Xu
a1de97fe29 xfs: Fix the free logic of state in xfs_attr_node_hasname
When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine.
Adding a getxattr operation after xattr corrupted, I can reproduce it 100%.

The deadlock as below:
[983.923403] task:setfattr        state:D stack:    0 pid:17639 ppid: 14687 flags:0x00000080
[  983.923405] Call Trace:
[  983.923410]  __schedule+0x2c4/0x700
[  983.923412]  schedule+0x37/0xa0
[  983.923414]  schedule_timeout+0x274/0x300
[  983.923416]  __down+0x9b/0xf0
[  983.923451]  ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs]
[  983.923453]  down+0x3b/0x50
[  983.923471]  xfs_buf_lock+0x33/0xf0 [xfs]
[  983.923490]  xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs]
[  983.923508]  xfs_buf_get_map+0x4c/0x320 [xfs]
[  983.923525]  xfs_buf_read_map+0x53/0x310 [xfs]
[  983.923541]  ? xfs_da_read_buf+0xcf/0x120 [xfs]
[  983.923560]  xfs_trans_read_buf_map+0x1cf/0x360 [xfs]
[  983.923575]  ? xfs_da_read_buf+0xcf/0x120 [xfs]
[  983.923590]  xfs_da_read_buf+0xcf/0x120 [xfs]
[  983.923606]  xfs_da3_node_read+0x1f/0x40 [xfs]
[  983.923621]  xfs_da3_node_lookup_int+0x69/0x4a0 [xfs]
[  983.923624]  ? kmem_cache_alloc+0x12e/0x270
[  983.923637]  xfs_attr_node_hasname+0x6e/0xa0 [xfs]
[  983.923651]  xfs_has_attr+0x6e/0xd0 [xfs]
[  983.923664]  xfs_attr_set+0x273/0x320 [xfs]
[  983.923683]  xfs_xattr_set+0x87/0xd0 [xfs]
[  983.923686]  __vfs_removexattr+0x4d/0x60
[  983.923688]  __vfs_removexattr_locked+0xac/0x130
[  983.923689]  vfs_removexattr+0x4e/0xf0
[  983.923690]  removexattr+0x4d/0x80
[  983.923693]  ? __check_object_size+0xa8/0x16b
[  983.923695]  ? strncpy_from_user+0x47/0x1a0
[  983.923696]  ? getname_flags+0x6a/0x1e0
[  983.923697]  ? _cond_resched+0x15/0x30
[  983.923699]  ? __sb_start_write+0x1e/0x70
[  983.923700]  ? mnt_want_write+0x28/0x50
[  983.923701]  path_removexattr+0x9b/0xb0
[  983.923702]  __x64_sys_removexattr+0x17/0x20
[  983.923704]  do_syscall_64+0x5b/0x1a0
[  983.923705]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[  983.923707] RIP: 0033:0x7f080f10ee1b

When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in
xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it
free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job.

Then subsequent removexattr will hang because of it.

This bug was introduced by kernel commit 07120f1abd ("xfs: Add xfs_has_attr and subroutines").
It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state
in this case. But xfs_attr_node_hasname will free state itself instead of caller if
xfs_da3_node_lookup_int fails.

Fix this bug by moving the step of free state into caller.

Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and
xfs_attr_node_removename_setup function because we should free state ourselves.

Fixes: 07120f1abd ("xfs: Add xfs_has_attr and subroutines")
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-24 10:06:02 -08:00
Mingjie Zhang
88459e3e42 USB: serial: option: add Fibocom FM101-GL variants
Update the USB serial option driver support for the Fibocom
FM101-GL Cat.6
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with
  MBIM interfaces for /Linux/Chrome OS)
- VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb
  interface for /Linux/Chrome OS)

0x01a2: mbim, tty, tty, diag, gnss
0x01a4: mbim, diag, tty, adb, gnss, gnss

Here are the outputs of lsusb -v and usb-devices:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=01a2 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=673326ce
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)

Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.20
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x2cb7
  idProduct          0x01a2
  bcdDevice            5.04
  iManufacturer           1 Fibocom Wireless Inc.
  iProduct                2 Fibocom FM101-GL Module
  iSerial                 3 673326ce
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x015d
    bNumInterfaces          6
    bConfigurationValue     1
    iConfiguration          4 MBIM_DUN_DUN_DIAG_NMEA
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              896mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass      14
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass     14
      bInterfaceProtocol      0
      iInterface              5 Fibocom FM101-GL LTE Modem
      CDC Header:
        bcdCDC               1.10
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC MBIM:
        bcdMBIMVersion       1.00
        wMaxControlMessage   4096
        bNumberFilters       32
        bMaxFilterSize       128
        wMaxSegmentSize      2048
        bmNetworkCapabilities 0x20
          8-byte ntb input size
      CDC MBIM Extended:
        bcdMBIMExtendedVersion           1.00
        bMaxOutstandingCommandMessages     64
        wMTU                             1500
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               9
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      2
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      2
      iInterface              6 MBIM Data
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8e  EP 14 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               6
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0f  EP 15 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               2
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     48
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=01a4 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=673326ce
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)

Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.20
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x2cb7
  idProduct          0x01a4
  bcdDevice            5.04
  iManufacturer           1 Fibocom Wireless Inc.
  iProduct                2 Fibocom FM101-GL Module
  iSerial                 3 673326ce
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0180
    bNumInterfaces          7
    bConfigurationValue     1
    iConfiguration          4 MBIM_DIAG_DUN_ADB_GNSS_GNSS
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              896mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass      14
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass     14
      bInterfaceProtocol      0
      iInterface              5 Fibocom FM101-GL LTE Modem
      CDC Header:
        bcdCDC               1.10
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC MBIM:
        bcdMBIMVersion       1.00
        wMaxControlMessage   4096
        bNumberFilters       32
        bMaxFilterSize       128
        wMaxSegmentSize      2048
        bmNetworkCapabilities 0x20
          8-byte ntb input size
      CDC MBIM Extended:
        bcdMBIMExtendedVersion           1.00
        bMaxOutstandingCommandMessages     64
        wMTU                             1500
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               9
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      2
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      2
      iInterface              6 MBIM Data
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8e  EP 14 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               6
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0f  EP 15 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               2
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     48
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass     66
      bInterfaceProtocol      1
      iInterface              8 ADB Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0

Signed-off-by: Mingjie Zhang <superzmj@fibocom.com>
Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-11-24 19:03:31 +01:00
Linus Torvalds
5f53fa508d parisc bug and warning fixes for kernel v5.16-rc3
Increase the FRAME_WARN value to avoid some new warnings which showed up
 in the Linux kernel test project, revert a patch which moved the _stext
 symbol and thus tiggered errors in the hardened usercopy checks, and
 introduce an extru_safe() assembler macro to overcome possible unsafe
 usage of the extru asm statement on 64-bit PA2.0 machines.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYZ5GgwAKCRD3ErUQojoP
 X5adAPwMFlxhTrkflWqSP35G/AjQNSzxplaj75fBWRGRJWTXKAD/cMpePFj//CBw
 n5wOh6eDvBDQUElctHOCFMVZgHyrXA0=
 =5LTo
 -----END PGP SIGNATURE-----

Merge tag 'for-5.16/parisc-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
 "Increase the FRAME_WARN value to avoid some new warnings which showed
  up in the Linux kernel test project, revert a patch which moved the
  _stext symbol and thus tiggered errors in the hardened usercopy
  checks, and introduce an extru_safe() assembler macro to overcome
  possible unsafe usage of the extru asm statement on 64-bit PA2.0
  machines"

* tag 'for-5.16/parisc-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  Revert "parisc: Fix backtrace to always include init funtion names"
  parisc: Convert PTE lookup to use extru_safe() macro
  parisc: Fix extraction of hash lock bits in syscall.S
  parisc: Provide an extru_safe() macro to extract unsigned bits
  parisc: Increase FRAME_WARN to 2048 bytes on parisc
2021-11-24 09:55:24 -08:00
Linus Torvalds
29889216be tracing: Fix wrong uprobe variable in iterator
uprobe_perf_open() processes a list of probes, but due to a missing
 setting of the uprobe to be processed, the loop processes the head probe
 instead of the added probes.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYZ5VIhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qsI4AP4yOJ+r/2b7cTWOpnZcs5grnFfKD46t
 LRXXOyWc9CNfNwEA/pXFW3IJ0hCKuMaHAJbPFuyIKufGBJxPEae0htc0SgI=
 =HDiu
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Fix wrong uprobe variable in iterator

  uprobe_perf_open() processes a list of probes, but due to a missing
  setting of the uprobe to be processed, the loop processes the head
  probe instead of the added probes"

* tag 'trace-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/uprobe: Fix uprobe_perf_open probes iteration
2021-11-24 09:51:22 -08:00
Linus Torvalds
740bebf421 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:

 - fix for Intel-ISH driver to make sure it gets aoutoloaded only on
   matching devices and not universally (Thomas Weißschuh)

 - fix for Wacom driver reporting invalid contact under certain
   circumstances (Jason Gerecke)

 - probing fix for ft260 dirver (Michael Zaidman)

 - fix for generic keycode remapping (Thomas Weißschuh)

 - fix for division by zero in hid-magicmouse (Claudia Pellegrino)

 - other tiny assorted fixes and new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: multitouch: Fix Iiyama ProLite T1931SAW (0eef:0001 again!)
  HID: nintendo: eliminate dead datastructures in !CONFIG_NINTENDO_FF case
  HID: magicmouse: prevent division by 0 on scroll
  HID: thrustmaster: fix sparse warnings
  HID: Ignore battery for Elan touchscreen on HP Envy X360 15-eu0xxx
  HID: input: set usage type to key on keycode remap
  HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fields
  HID: ft260: fix i2c probing for hwmon devices
  Revert "HID: hid-asus.c: Maps key 0x35 (display off) to KEY_SCREENLOCK"
  HID: intel-ish-hid: fix module device-id handling
  mod_devicetable: fix kdocs for ishtp_device_id
  HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
  HID: nintendo: unlock on error in joycon_leds_create()
  platform/x86: isthp_eclite: only load for matching devices
  platform/chrome: chros_ec_ishtp: only load for matching devices
  HID: intel-ish-hid: hid-client: only load for matching devices
  HID: intel-ish-hid: fw-loader: only load for matching devices
  HID: intel-ish-hid: use constants for modaliases
  HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()
2021-11-24 09:44:13 -08:00
Mark Brown
cd2f33e93d
ASoC: SOF: Intel: power optimizations with HDaudio SPIB register
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

	The use of the SPIB register helps reduce power consumption - though
	to a smaller degree than DMI_L1. This hardware capability is however
	incompatible with userspace-initiated rewinds typically used by
	PulseAudio.

	In the past (2015..2017) Intel suggested an API extension to let
	applications disable rewinds. At the time the feedback was that such a
	capability was too Intel-specific and SPIB remained unused except for
	loading DSP code. We now see devices with smaller batteries being
	released, and it's time to revisit Linux support for SPIB to extend
	battery life.

	In this update the rewinds are disabled via an opt-in kernel
	parameter. In the previous reviews, there was consensus that a Kconfig
	option was too complicated for distributions to set, and we are
	missing a TBD API to expose such capabilities to user-space.

	The debate on whether or not to use rewinds, and the impact of
	disabling rewinds, will likely be closed when Intel releases the
	'deep-buffer' support, currently under development [2][3]. With this
	solution, rewinds will not be needed, ever. When an application deals
	with content that is not latency-sensitive (e.g. music playback), it
	will be able to reduce power consumption by selecting a different PCM
	device with increased buffering capabilities.  Low-latency streams
	will be handled by the 'regular' path. In other words, the impossible
	compromise between power and latency will be handled with different
	PCM devices/profiles for the same endpoint, and we can push the design
	of capability negotiation to a later time when all the building blocks
	(firmware topology, kernel, userspace) are ready - we still have
	firmware xruns, DPCM race conditions to solve, and a need to describe
	these alternate PCM devices with UCM using 'modifiers'.
2021-11-24 17:33:54 +00:00
Lorenzo Bianconi
2a9e985747 mt76: fix possible pktid leak
Fix a possible idr pkt-id leak if the packet is dropped on tx side

Fixes: bd1e3e7b69 ("mt76: introduce packet_id idr")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/a560caffcc24452fb48af53904bbe5c45ea5db93.1637602268.git.lorenzo@kernel.org
2021-11-24 19:21:50 +02:00