Commit 39fbef4b0f ("PM: hibernate: Get block device exclusively in
swsusp_check()") changed the opening mode of the block device to
(FMODE_READ | FMODE_EXCL).
In the corresponding calls to swsusp_close(), the mode is still just
FMODE_READ which triggers the warning in blkdev_flush_mapping() on
resume from hibernate.
So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the
device.
Fixes: 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Check cpc_desc against NULL in cppc_get_perf(), so it doesn't crash
down the road if cpc_desc is NULL.
Fixes: 0654cf05d1 ("ACPI: CPPC: Introduce cppc_get_nominal_perf()")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
edid_read() was assumed to return 0 on success. After commit
7f16d0f3b8e2("drm/bridge: anx7625: Propagate errors from sp_tx_rst_aux()"),
the function will return > 0 for successful case, representing the i2c
read bytes. Otherwise -EIO on failure cases. Update the g_edid_break
break condition accordingly.
Fixes: 7f16d0f3b8e2("drm/bridge: anx7625: Propagate errors from sp_tx_rst_aux()")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118193002.407168-1-hsinyi@chromium.org
Update valid size if write is still in I/O queue.
Fixes xfstest generic/240
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We must check size before trying to allocate.
Size can be set for example by "ulimit -f".
Fixes xfstest generic/228
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Two problems:
1. ntfs3_setattr can't truncate preallocated space;
2. if allocated fragment "cross" valid size, then fragment splits into two parts:
- normal part;
- unwritten part (here we must return FIEMAP_EXTENT_LAST).
Before this commit we returned FIEMAP_EXTENT_LAST for whole fragment.
Fixes xfstest generic/092
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Update NC-SI command handler (both standard and OEM) to take into
account of payload paddings in allocating skb (in case of payload
size is not 32-bit aligned).
The checksum field follows payload field, without taking payload
padding into account can cause checksum being truncated, leading to
dropped packets.
Fixes: fb4ee67529 ("net/ncsi: Add NCSI OEM command support")
Signed-off-by: Kumar Thangavel <thangavel.k@hcl.com>
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
To hot unplug a CPU, the idle task on that CPU calls a few layers of C
code before finally leaving the kernel. When KASAN is in use, poisoned
shadow is left around for each of the active stack frames, and when
shadow call stacks are in use. When shadow call stacks (SCS) are in use
the task's saved SCS SP is left pointing at an arbitrary point within
the task's shadow call stack.
When a CPU is offlined than onlined back into the kernel, this stale
state can adversely affect execution. Stale KASAN shadow can alias new
stackframes and result in bogus KASAN warnings. A stale SCS SP is
effectively a memory leak, and prevents a portion of the shadow call
stack being used. Across a number of hotplug cycles the idle task's
entire shadow call stack can become unusable.
We previously fixed the KASAN issue in commit:
e1b77c9298 ("sched/kasan: remove stale KASAN poison after hotplug")
... by removing any stale KASAN stack poison immediately prior to
onlining a CPU.
Subsequently in commit:
f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
... the refactoring left the KASAN and SCS cleanup in one-time idle
thread initialization code rather than something invoked prior to each
CPU being onlined, breaking both as above.
We fixed SCS (but not KASAN) in commit:
63acd42c0d ("sched/scs: Reset the shadow stack when idle_task_exit")
... but as this runs in the context of the idle task being offlined it's
potentially fragile.
To fix these consistently and more robustly, reset the SCS SP and KASAN
shadow of a CPU's idle task immediately before we online that CPU in
bringup_cpu(). This ensures the idle task always has a consistent state
when it is running, and removes the need to so so when exiting an idle
task.
Whenever any thread is created, dup_task_struct() will give the task a
stack which is free of KASAN shadow, and initialize the task's SCS SP,
so there's no need to specially initialize either for idle thread within
init_idle(), as this was only necessary to handle hotplug cycles.
I've tested this on arm64 with:
* gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK
* clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK
... offlining and onlining CPUS with:
| while true; do
| for C in /sys/devices/system/cpu/cpu*/online; do
| echo 0 > $C;
| echo 1 > $C;
| done
| done
Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Link: https://lore.kernel.org/lkml/20211115113310.35693-1-mark.rutland@arm.com/
Fix:
WARNING: modpost: vmlinux.o(.text.unlikely+0x64d0): Section mismatch in reference \
from the function prepare_command_line() to the variable .init.data:command_line
The function prepare_command_line() references
the variable __initdata command_line.
This is often because prepare_command_line lacks a __initdata
annotation or the annotation of command_line is wrong.
Apparently some toolchains do different inlining decisions.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YZySgpmBcNNM2qca@zn.tnic
Check if the pointer lcd->ops->init_display exists before dereferencing it.
If a driver called charlcd_init() without defining the ops, this would
return segmentation fault, as happened to me when implementing a charlcd
driver. Checking the pointer before dereferencing protects from
segmentation fault.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Removing 'int' from 'unsigned long int' declaration, which is unnecessary.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
On POWER9 and newer, rather than the complex HMI synchronisation and
subcore state, have each thread un-apply the guest TB offset before
calling into the early HMI handler.
This allows the subcore state to be avoided, including subcore enter
/ exit guest, which includes an expensive divide that shows up
slightly in profiles.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-54-npiggin@gmail.com
The P9 path uses vc->dpdes only for msgsndp / SMT emulation. This adds
an ordering requirement between vcpu->doorbell_request and vc->dpdes for
no real benefit. Use vcpu->doorbell_request directly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-53-npiggin@gmail.com
This goes further to removing vcores from the P9 path. Also avoid the
memset in favour of explicitly initialising all fields.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-52-npiggin@gmail.com
The P9 path always uses one vcpu per vcore, so none of the vcore, locks,
stolen time, blocking logic, shared waitq, etc., is required.
Remove most of it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-51-npiggin@gmail.com
cpu_in_guest is set to determine if a CPU needs to be IPI'ed to exit
the guest and notice the need_tlb_flush bit.
This can be implemented as a global per-CPU pointer to the currently
running guest instead of per-guest cpumasks, saving 2 atomics per
entry/exit. P7/8 doesn't require cpu_in_guest, nor does a nested HV
(only the L0 does), so move it to the P9 HV path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-50-npiggin@gmail.com
kvm_hstate.in_guest provides the equivalent of MSR[RI]=0 protection,
and it covers the existing MSR[RI]=0 section in late entry and early
exit, so clearing and setting MSR[RI] in those cases does not
actually do anything useful.
Remove the RI manipulation and replace it with comments. Make the
in_guest memory accesses a bit closer to a proper critical section
pattern. This speeds up guest entry/exit performance.
This also removes the MSR[RI] warnings which aren't very interesting
and would cause crashes if they hit due to causing an interrupt in
non-recoverable code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-48-npiggin@gmail.com
slbmfee/slbmfev instructions are very expensive, moreso than a regular
mfspr instruction, so minimising them significantly improves hash guest
exit performance. The slbmfev is only required if slbmfee found a valid
SLB entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-47-npiggin@gmail.com
Rearrange the MSR saving on entry so it does not follow the mtmsrd to
disable interrupts, avoiding a possible RAW scoreboard stall.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-46-npiggin@gmail.com
mftb() is expensive and one can be avoided on nested guest dispatch.
If the time checking code distinguishes between the L0 timer and the
nested HV timer, then both can be tested in the same place with the
same mftb() value.
This also nicely illustrates the relationship between the L0 and nested
HV timers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-45-npiggin@gmail.com
Use the existing TLB flushing logic to IPI the previous CPU and run the
necessary barriers before running a guest vCPU on a new physical CPU,
to do the necessary radix GTSE barriers for handling the case of an
interrupted guest tlbie sequence.
This requires the vCPU TLB flush sequence that is currently just done
on one thread, to be expanded to ensure the other threads execute a
ptesync, because causing them to exit the guest will no longer cause a
ptesync by itself.
This results in more IPIs than the TLB flush logic requires, but it's
a significant win for common case scheduling when the vCPU remains on
the same physical CPU.
This saves about 520 cycles (nearly 10%) on a guest entry+exit micro
benchmark on a POWER9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-44-npiggin@gmail.com
This creates separate functions for old and new paths for vCPU TLB
flushing, which will reduce complexity of the next change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-43-npiggin@gmail.com
Some of the DAWR SPR access is already predicated on dawr_enabled(),
apply this to the remainder of the accesses.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-41-npiggin@gmail.com
Tighten up partition switching code synchronisation and comments.
In particular, hwsync ; isync is required after the last access that is
performed in the context of a partition, before the partition is
switched away from.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-40-npiggin@gmail.com
Linux implements SPR save/restore including storage space for registers
in the task struct for process context switching. Make use of this
similarly to the way we make use of the context switching fp/vec save
restore.
This improves code reuse, allows some stack space to be saved, and helps
with avoiding VRSAVE updates if they are not required.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-39-npiggin@gmail.com
Use HFSCR facility disabling to implement demand faulting for TM, with
a hysteresis counter similar to the load_fp etc counters in context
switching that implement the equivalent demand faulting for userspace
facilities.
This speeds up guest entry/exit by avoiding the register save/restore
when a guest is not frequently using them. When a guest does use them
often, there will be some additional demand fault overhead, but these
are not commonly used facilities.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-38-npiggin@gmail.com
Use HFSCR facility disabling to implement demand faulting for EBB, with
a hysteresis counter similar to the load_fp etc counters in context
switching that implement the equivalent demand faulting for userspace
facilities.
This speeds up guest entry/exit by avoiding the register save/restore
when a guest is not frequently using them. When a guest does use them
often, there will be some additional demand fault overhead, but these
are not commonly used facilities.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-37-npiggin@gmail.com
Use CPU_FTR_P9_RADIX_PREFETCH_BUG to apply the workaround, to test for
DD2.1 and below processors. This saves a mtSPR in guest entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-35-npiggin@gmail.com
This moves PMU switch to guest as late as possible in entry, and switch
back to host as early as possible at exit. This helps the host get the
most perf coverage of KVM entry/exit code as possible.
This is slightly suboptimal for SPR scheduling point of view when the
PMU is enabled, but when perf is disabled there is no real difference.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-34-npiggin@gmail.com
If TM is not active, only TM register state needs to be saved and
restored, avoiding several mfmsr/mtmsrd instructions and improving
performance.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-33-npiggin@gmail.com
Move register saving and loading from kvmhv_p9_guest_entry() into the HV
and nested entry handlers.
Accesses are scheduled to reduce mtSPR / mfSPR interleaving which
reduces SPR scoreboard stalls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-32-npiggin@gmail.com
Move the part of the guest entry which is specific to nested HV into its
own function. This is just refactoring.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-31-npiggin@gmail.com
Move the P9 guest/host register switching functions to the built-in
P9 entry code, and export it for nested to use as well.
This allows more flexibility in scheduling these supervisor privileged
SPR accesses with the HV privileged and PR SPR accesses in the low level
entry code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-30-npiggin@gmail.com
This juggles SPR switching on the entry and exit sides to be more
symmetric, which makes the next refactoring patch possible with no
functional change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-28-npiggin@gmail.com
Keep better track of the current SPR value in places where
they are to be loaded with a new context, to reduce expensive
mtSPR operations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-27-npiggin@gmail.com
Reduce the number of mfTB executed by passing the current timebase
around entry and exit code rather than read it multiple times.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-25-npiggin@gmail.com
Move the TB updates between saving and loading guest and host SPRs,
to improve scheduling by keeping issue-NTC operations together as
much as possible.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-24-npiggin@gmail.com
Change dec_expires to be relative to the guest timebase, and allow
it to be moved into low level P9 guest entry functions, to improve
SPR access scheduling.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-23-npiggin@gmail.com
Small cleanup makes it a bit easier to match up entry and exit
operations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-22-npiggin@gmail.com
Moving the mtmsrd after the host SPRs are saved and before the guest
SPRs start to be loaded can prevent an SPR scoreboard stall (because
the mtmsrd is L=1 type which does not cause context synchronisation.
This is also now more convenient to combined with the mtmsrd L=0
instruction to enable facilities just below, but that is not done yet.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-21-npiggin@gmail.com
This reduces the number of mtmsrd required to enable facility bits when
saving/restoring registers, by having the KVM code set all bits up front
rather than using individual facility functions that set their particular
MSR bits.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-20-npiggin@gmail.com
Move the SPR update into its relevant helper function. This will
help with SPR scheduling improvements in later changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-19-npiggin@gmail.com