Commit graph

1,267,977 commits

Author SHA1 Message Date
Philipp Hortmann
da1e39683a staging: rtl8192e: Remove unused function rtllib_start_master_bss()
Remove unused functions rtllib_start_master_bss(), rtllib_rx_assoc_rq()
and rtllib_rx_auth_rq() and resulting unused functions.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/ac2012d94fe4ff705cc900bb1cf2d58bc81c77f0.1691908402.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:44:31 +02:00
Philipp Hortmann
2b632f7f4a staging: rtl8192e: Remove unsupported mode IW_MODE_MASTER
Tasklet irq_rx_tasklet is scheduled when hw is receiving frames. Function
_rtl92e_irq_rx_tasklet() is then called which calls then
_rtl92e_rx_normal(). In _rtl92e_rx_normal() all frames are processed by
rtllib_rx(). When ieee->iw_mode is IW_MODE_MASTER the function returns
0. The calling function then calls: dev_kfree_skb_any() which clears the
skb. So the driver clears all packets received in this mode. Remove dead
code in mode IW_MODE_MASTER.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/9cd4574e4cfe0a2d7afce03c9b868757e215a23c.1691908402.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:44:31 +02:00
Mingzai Sun
6a83264945 staging: vt6655: Change camel case variables to snake case
Change camel case to snake case and remove the unneeded "by" prefix.
Issue found by checkpatch.

Signed-off-by: Mingzai Sun <szp2017@gmail.com>
Link: https://lore.kernel.org/r/20230812151710.462685-1-szp2017@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:44:27 +02:00
Vinod Govindapillai
1bd1817b68 drm/i915/display: combine DP audio compute config steps
Combine all DP audio configs into a single function

Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818111950.128992-3-vinod.govindapillai@intel.com
2023-08-22 16:42:11 +03:00
Vinod Govindapillai
2f092c0c52 drm/i915/display: remove redundant parameter from sdp split update
The needed functionality can be performed using crtc_state here.

Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818111950.128992-2-vinod.govindapillai@intel.com
2023-08-22 16:41:45 +03:00
Yue Haibing
383e1b6a90 wifi: ath9k: Remove unused declarations
Commit b57ba3b2f7 ("ath9k: move ath9k_reload_chainmask_settings to common")
removed the implementation ath9k_reload_chainmask_settings() but not the declaration.
Also commit 978f78bf71 ("ath9k_hw: Move bt_stomp to hw from common.") left behind
ath9k_cmn_btcoex_bt_stomp() declaration.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230810145222.34364-1-yuehaibing@huawei.com
2023-08-22 16:39:23 +03:00
Ruan Jinjie
b2fd72aafb wifi: ath9k: Remove unnecessary ternary operators
Ther are a little ternary operators, the true or false judgement
of which is unnecessary in C language semantics.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230731124455.2039184-1-ruanjinjie@huawei.com
2023-08-22 16:38:40 +03:00
Dmitry Antipov
8b804643f4 wifi: ath9k: consistently use kstrtoX_from_user() functions
Use 'kstrtoul_from_user()' and 'kstrtobool_from_user()'
where appropriate and thus avoid some code duplication.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726185046.188225-1-dmantipov@yandex.ru
2023-08-22 16:37:53 +03:00
Minjie Du
6edb4ba6fb wifi: ath9k: fix parameter check in ath9k_init_debug()
Make IS_ERR() judge the debugfs_create_dir() function return
in ath9k_init_debug()

Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230712114740.13226-1-duminjie@vivo.com
2023-08-22 16:36:08 +03:00
Fedor Pchelkin
454994cfa9 wifi: ath9k: protect WMI command response buffer replacement with a lock
If ath9k_wmi_cmd() has exited with a timeout, it is possible that during
next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command
writes to new wmi->cmd_rsp_buf and makes a completion. This results in an
invalid ath9k_wmi_cmd() return value.

Move the replacement of WMI command response buffer and length under
wmi_lock. Note that last_seq_id value is updated there, too.

Thus, the buffer cannot be written to by a belated wmi_rsp callback
because that path is properly rejected by the last_seq_id check.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-2-pchelkin@ispras.ru
2023-08-22 16:35:17 +03:00
Fedor Pchelkin
b674fb513e wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rx
Currently, the synchronization between ath9k_wmi_cmd() and
ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being
rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().

Consider the following scenario:

CPU0					CPU1

ath9k_wmi_cmd(...)
  mutex_lock(&wmi->op_mutex)
  ath9k_wmi_cmd_issue(...)
  wait_for_completion_timeout(...)
  ---
  timeout
  ---
					/* the callback is being processed
					 * before last_seq_id became zero
					 */
					ath9k_wmi_ctrl_rx(...)
					  spin_lock_irqsave(...)
					  /* wmi->last_seq_id check here
					   * doesn't detect timeout yet
					   */
					  spin_unlock_irqrestore(...)
  /* last_seq_id is zeroed to
   * indicate there was a timeout
   */
  wmi->last_seq_id = 0
  mutex_unlock(&wmi->op_mutex)
  return -ETIMEDOUT

ath9k_wmi_cmd(...)
  mutex_lock(&wmi->op_mutex)
  /* the buffer is replaced with
   * another one
   */
  wmi->cmd_rsp_buf = rsp_buf
  wmi->cmd_rsp_len = rsp_len
  ath9k_wmi_cmd_issue(...)
    spin_lock_irqsave(...)
    spin_unlock_irqrestore(...)
  wait_for_completion_timeout(...)
					/* the continuation of the
					 * callback left after the first
					 * ath9k_wmi_cmd call
					 */
					  ath9k_wmi_rsp_callback(...)
					    /* copying data designated
					     * to already timeouted
					     * WMI command into an
					     * inappropriate wmi_cmd_buf
					     */
					    memcpy(...)
					    complete(&wmi->cmd_wait)
  /* awakened by the bogus callback
   * => invalid return result
   */
  mutex_unlock(&wmi->op_mutex)
  return 0

To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd()
under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside
ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for
initially designated wmi_cmd call, otherwise the path would be rejected
with last_seq_id check.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-1-pchelkin@ispras.ru
2023-08-22 16:35:17 +03:00
Ruan Jinjie
f708ed7177 wifi: ath5k: Remove redundant dev_err()
There is no need to call the dev_err() function directly to print a custom
message when handling an error from platform_get_irq() function as it is
going to display an appropriate error message in case of a failure.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726171235.2475625-1-ruanjinjie@huawei.com
2023-08-22 16:32:52 +03:00
Christophe Leroy
4b91dcc2f6 Documentation: devices.txt: Fix minors for ttyCPM*
ttyCPM* devices belong to CPM_UART driver at the first place
and that driver provides 6 ports.

Fixes: e29c3f81eb ("Documentation: devices.txt: reconcile serial/ucc_uart minor numers")
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/27d7124cf86157e2a27c2b039e769041994d3f22.1691992627.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:31:40 +02:00
Christophe Leroy
27681960f0 Documentation: devices.txt: Remove ttySIOC*
IOC3 serial driver was removed, remove associated devices
from documentation.

Fixes: 9c860e4cf7 ("tty/serial: remove the ioc3_serial driver")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/f13b5c64f8cb6d8f2357d7be14397676b27ac2a2.1691992627.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:31:40 +02:00
Christophe Leroy
e327fdc262 Documentation: devices.txt: Remove ttyIOC*
IOC4 serial driver was removed, remove associated devices
from documentation.

Fixes: a017ef17cf ("tty/serial: remove the ioc4_serial driver")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/b5deb1222eb92017f0efe5b5cae127ac11983b3d.1691992627.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:31:40 +02:00
Justin Chen
42a569cd0d serial: 8250_bcm7271: improve bcm7271 8250 port
The 8250 BCM7271 UART is not a direct match to PORT_16550A and other
generic ports do not match its hardware capabilities. PORT_ALTR matches
the rx trigger levels, but its vendor configurations are not compatible.
Unfortunately this means we need to create another port to fully capture
the hardware capabilities of the BCM7271 UART.

To alleviate some latency pressures, we default the rx trigger level to 8.

Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/1692643978-16570-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:30:59 +02:00
Hugo Villeneuve
b4a778303e serial: sc16is7xx: add missing support for rs485 devicetree properties
Retrieve rs485 devicetree properties on registration of sc16is7xx ports in
case they are attached to an rs485 transceiver.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-7-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:30:00 +02:00
Hugo Villeneuve
9baeea723c serial: sc16is7xx: fix bug when first setting GPIO direction
When configuring a pin as an output pin with a value of logic 0, we
end up as having a value of logic 1 on the output pin. Setting a
logic 0 a second time (or more) after that will correctly output a
logic 0 on the output pin.

By default, all GPIO pins are configured as inputs. When we enter
sc16is7xx_gpio_direction_output() for the first time, we first set the
desired value in IOSTATE, and then we configure the pin as an output.
The datasheet states that writing to IOSTATE register will trigger a
transfer of the value to the I/O pin configured as output, so if the
pin is configured as an input, nothing will be transferred.

Therefore, set the direction first in IODIR, and then set the desired
value in IOSTATE.

This is what is done in NXP application note AN10587.

Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:30:00 +02:00
Hugo Villeneuve
0499942928 serial: sc16is7xx: fix regression with GPIO configuration
Commit 679875d1d8 ("sc16is7xx: Separate GPIOs from modem control lines")
and commit 21144bab4f ("sc16is7xx: Handle modem status lines")
changed the function of the GPIOs pins to act as modem control
lines without any possibility of selecting GPIO function.

As a consequence, applications that depends on GPIO lines configured
by default as GPIO pins no longer work as expected.

Also, the change to select modem control lines function was done only
for channel A of dual UART variants (752/762). This was not documented
in the log message.

Allow to specify GPIO or modem control line function in the device
tree, and for each of the ports (A or B).

Do so by using the new device-tree property named
"nxp,modem-control-line-ports" (property added in separate patch).

When registering GPIO chip controller, mask-out GPIO pins declared as
modem control lines according to this new DT property.

Fixes: 679875d1d8 ("sc16is7xx: Separate GPIOs from modem control lines")
Fixes: 21144bab4f ("sc16is7xx: Handle modem status lines")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:30:00 +02:00
Hugo Villeneuve
4cf478dc5d dt-bindings: sc16is7xx: Add property to change GPIO function
Some variants in this series of UART controllers have GPIO pins that
are shared between GPIO and modem control lines.

The pin mux mode (GPIO or modem control lines) can be set for each
ports (channels) supported by the variant.

This adds a property to the device tree to set the GPIO pin mux to
modem control lines on selected ports if needed.

Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230807214556.540627-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:30:00 +02:00
Hugo Villeneuve
dabc54a457 serial: sc16is7xx: remove obsolete out_thread label
Commit c8f71b49ee ("serial: sc16is7xx: setup GPIO controller later
in probe") moved GPIO setup code later in probe function. Doing so
also required to move ports cleanup code (out_ports label) after the
GPIO cleanup code.

After these moves, the out_thread label becomes misplaced and makes
part of the cleanup code illogical.

This patch remove the now obsolete out_thread label and make GPIO
setup code jump to out_ports label if it fails.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230807214556.540627-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:30:00 +02:00
Hugo Villeneuve
2861ed4d6e serial: sc16is7xx: fix broken port 0 uart init
The sc16is7xx_config_rs485() function is called only for the second
port (index 1, channel B), causing initialization problems for the
first port.

For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
    port->membase = 0
    port->mapbase = 0
    port->iobase  = 0

Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
	/*
	 * If there isn't a port here, don't do anything further.
	 */
	if (!port->iobase && !port->mapbase && !port->membase)
		return;

Typically, I2C and SPI drivers do not set port->membase and
port->mapbase.

The max310x driver sets port->membase to ~0 (all ones). By
implementing the same change in this driver, uart_configure_port() is
now correctly executed for all ports.

Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:30:00 +02:00
Jisheng Zhang
22130dae05 serial: 8250_dw: fall back to poll if there's no interrupt
When there's no irq(this can be due to various reasons, for example,
no irq from HW support, or we just want to use poll solution, and so
on), falling back to poll is still better than no support at all.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230806092056.2467-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:29:29 +02:00
Jisheng Zhang
e9f0dff15a dt-bindings: serial: snps-dw-apb-uart: make interrupt optional
The driver fall back to poll style when there's no irq. "poll" still
looks better than no support.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230806092056.2467-2-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:29:29 +02:00
Yi Yang
5abd01145d serial: tegra: handle clk prepare error in tegra_uart_hw_init()
In tegra_uart_hw_init(), the return value of clk_prepare_enable() should
be checked since it might fail.

Fixes: e9ea096dd2 ("serial: tegra: add serial driver")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Link: https://lore.kernel.org/r/20230817105406.228674-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:29:18 +02:00
Nick Hu
8a6498f2b9 serial: sifive: Add suspend and resume operations
If the Sifive Uart is not used as the wake up source, suspend the uart
before the system enter the suspend state to prevent it woken up by
unexpected uart interrupt. Resume the uart once the system woken up.

Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20230815090216.2575971-1-nick.hu@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:29:10 +02:00
Lucas Tanure
6a4197f976 tty: serial: meson: Add a earlycon for the T7 SoC
The new Amlogic T7 SoC does not have a always-on uart,
so add OF_EARLYCON_DECLARE for it.

Signed-off-by: Lucas Tanure <tanure@linux.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230814080128.143613-2-tanure@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:29:01 +02:00
Lucas Tanure
153fece7b7 dt-bindings: serial: amlogic,meson-uart: Add compatible string for T7
Amlogic T7 SoCs uses the same UART controller as S4 SoCs and G12A.
There is no need for an extra compatible line in the driver, but
add T7 compatible line for documentation.

Signed-off-by: Lucas Tanure <tanure@linux.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230814080128.143613-1-tanure@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:29:01 +02:00
Amelie Delaunay
2490a0ca57 serial: stm32: synchronize RX DMA channel in shutdown
In shutdown, RX DMA channel is terminated. If the DMA RX callback is
scheduled but not yet executed, while a new RX DMA transfer is started, the
callback can be executed, and then disturb the ongoing RX DMA transfer.
To avoid such a case, call dmaengine_synchronize in shutdown, after the
DMA RX channel is terminated.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-7-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:28:51 +02:00
Valentin Caron
a01ae50d7e serial: stm32: replace access to DMAR bit by dmaengine_pause/resume
It's rather advised to rely on DMA pause / resume instead of
clearing/setting DMA request enable bit for the same purpose. Some DMA
request/acknowledge race may encountered by doing so. We prefer to use
dmaengine_pause and resume instead to pause a dma transfer when it is
necessary.

Create two new functions (stm32_usart_rx_dma_pause, stm32_usart_rx_dma
_resume) to handle dma error when pausing/resuming.

And rename stm32_usart_start_rx_dma_cyclic() to
stm32_usart_rx_dma_start_or_resume() and use this function to resume an
rx dma transfer. If resume fail, stm32_usart_rx_dma_start_or_resume can
create a new transfer to continue.

It is also safer to close DMA before reset DMAR in stm32_usart_shutdown.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-6-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:28:51 +02:00
Valentin Caron
7f28bcea82 serial: stm32: group dma pause/resume error handling into single function
Create new function "stm32_usart_dma_pause_resume" that called dmaengine_
pause/resume and in case of error, terminate dma transaction.

Two other functions are created to facilitate the use of stm32_usart_dma
_pause_resume : stm32_usart_tx_dma_pause, stm32_usart_tx_dma_resume.
Equivalent functions for rx will be added in future patch.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-5-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:28:51 +02:00
Valentin Caron
00d1f9c6af serial: stm32: modify parameter and rename stm32_usart_rx_dma_enabled
Rename stm32_usart_rx_dma_enabled to stm32_usart_rx_dma_started in order
to match with stm32_usart_tx_dma_started.

Modify argument of stm32_usart_rx_dma_started from uart_port structure to
stm32_port structure to match with stm32_usart_tx_dma_started.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-4-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:28:51 +02:00
Valentin Caron
00bc5e8fc9 serial: stm32: use DMAT as a configuration bit
DMAT is a configuration bit so it should be set at the startup of uart
port and not when a DMA transfer begins.

This patch move set of DMAT into set_termios and remove DMAT reset except
in shutdown.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-3-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:28:51 +02:00
Valentin Caron
db89728aba serial: stm32: avoid clearing DMAT bit during transfer
It's rather advised to rely on DMA pause / resume instead of
clearing/setting DMA request enable bit for the same purpose. Some DMA
request/acknowledge race may encountered by doing so. We prefer to use
dmaengine_pause and resume instead to pause a dma transfer when it is
necessary.

It is also safer to close DMA before reset DMAT in stm32_usart_shutdown.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:28:51 +02:00
Daniel Starke
e112ec4202 tty: n_gsm: add restart flag to extended ioctl config
Currently, changing the parameters of the n_gsm mux gives no direct control
to the user whether this should trigger a mux reset or not. The decision is
solely made by the driver based on the assumption which parameter changes
are compatible or not. Therefore, the user has no means to perform an
automatic mux reset after parameter configuration for non-conflicting
changes.

Add the parameter 'flags' to 'gsm_config_ext' to force a mux reset after
ioctl setting regardless of whether the changes made require this or not
by setting this to 'GSM_FL_RESTART'. This is done similar to
'GSM_FL_RESTART' in gsm_dlci_config.flags.

Note that 'GSM_FL_RESTART' is currently the only allowed flag to allow
additions here.

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-9-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:21:34 +02:00
Daniel Starke
5767712668 tty: n_gsm: cleanup gsm_control_command and gsm_control_reply
There are multiple places in gsm_control_command and gsm_control_reply that
derive the specific DLCI handle directly out of the DLCI table in gsm.

Add a local variable which holds this handle and use it instead to improve
code readability.

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:21:24 +02:00
Daniel Starke
e74c048ae4 tty: n_gsm: increase gsm_mux unsupported counted where appropriate
The structure gsm_mux contains the 'unsupported' field. However, there is
currently no place in the code which increases this counter.

Increase the 'unsupported' statistics counter in the following case:
- an unsupported frame type has been requested by the peer via parameter
  negotiation
- a control frame with an unsupported but known command has been received

Note that we have no means to detect an inconsistent/unsupported adaptation
sufficient accuracy as this changes the structure of the UI/UIH frames.
E.g. a one byte header is added in case of convergence layer type 2 instead
of 1 and contains the modem signal octet with the state of the signal
lines. There is no checksum or other value which indicates of this field is
correct or should be present. Therefore, we can only assume protocol
correctness here. See also 'gsm_dlci_data()' where this is handled.

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-6-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:21:24 +02:00
Daniel Starke
b99f51ba04 tty: n_gsm: increase malformed counter for malformed control frames
The malformed counter in gsm_mux is already increased in case of errors
detected in gsm_queue() and gsm1_receive(). gsm_dlci_command() also
detects a case for a malformed frame but does not increase the malformed
counter yet.

Fix this by also increasing the gsm_mux malformed counter in case of a
malformed frame in gsm_dlci_command().
Note that the malformed counter is not yet exposed and only set internally.

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:21:24 +02:00
Daniel Starke
a1ce6da083 tty: n_gsm: add open_error counter to gsm_mux
Extend the n_gsm link statistics by a failed link open counter in
preparation for an upcoming patch which will expose these.
This counter is increased whenever an attempt to open the control channel
failed. This is true in the following cases:
- new DLCI allocation failed
- connection request (SAMB) with invalid CR flag has been received
- connection response (UA) timed out
- parameter negotiation timed out or failed

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:21:24 +02:00
Daniel Starke
e1c90bbb5f tty: n_gsm: remove unneeded initialization of ret in gsm_dlci_config
The variable 'ret' is not used before assignment from gsm_activate_mux().
Still it gets initialized to zero at declaration.

Fix this as remarked in the link below by moving the declaration to the
first assignment.

Link: https://lore.kernel.org/all/b42bc4d1-cc9d-d115-c981-aaa053bdc59f@kernel.org/

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:21:24 +02:00
Daniel Starke
901de5ac0e tty: n_gsm: add missing description to structs in gsmmux.h
Currently, all available structure fields in gsmmux.h except those
for gsm_config are commented. Furthermore, no kernel doc comments are used.

Fix this by adding appropriate comments to the not commented fields of
gsm_config. Convert the comments of the other structs to kernel doc format.

Note that 'mru' and 'mtu' refer to the size without basic/advanced option
mode header and byte stuffing as defined in the standard in chapter 5.7.2.

Link: https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:21:24 +02:00
Daniel Starke
a031c77dfc tty: n_gsm: add restart flag to DLC specific ioctl config
Currently, changing the parameters of a DLCI gives no direct control to the
user whether this should trigger a channel reset or not. The decision is
solely made by the driver based on the assumption which parameter changes
are compatible or not. Therefore, the user has no means to perform an
automatic channel reset after parameter configuration for non-conflicting
changes.

Add the parameter 'flags' to 'gsm_dlci_config' to force a channel reset
after ioctl setting regardless of whether the changes made require this or
not by setting this to 'GSM_FL_RESTART'.

Note that 'GSM_FL_RESTART' is currently the only allow flag to allow
additions here.

Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22 15:21:24 +02:00
Florian Westphal
169384fbe8 netfilter: nf_tables: allow loop termination for pending fatal signal
abort early so task can exit faster if a fatal signal is pending,
no need to continue validation in that case.

Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-22 15:14:32 +02:00
Justin Stitt
aa222dd190 netfilter: xtables: refactor deprecated strncpy
Prefer `strscpy_pad` as it's a more robust interface whilst maintaing
zero-padding behavior.

There may have existed a bug here due to both `tbl->repl.name` and
`info->name` having a size of 32 as defined below:
|  #define XT_TABLE_MAXNAMELEN 32

This may lead to buffer overreads in some situations -- `strscpy` solves
this by guaranteeing NUL-termination of the dest buffer.

Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-22 15:13:21 +02:00
Justin Stitt
06f7d3c3f8 netfilter: x_tables: refactor deprecated strncpy
Prefer `strscpy_pad` to `strncpy`.

Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-22 15:13:21 +02:00
Justin Stitt
ad156c23d6 netfilter: nft_meta: refactor deprecated strncpy
Prefer `strscpy_pad` to `strncpy`.

Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-22 15:13:21 +02:00
Justin Stitt
6d87a4eae8 netfilter: nft_osf: refactor deprecated strncpy
Use `strscpy_pad` over `strncpy` for NUL-terminated strings.

We can also drop the + 1 from `NFT_OSF_MAXGENRELEN + 1` since `strscpy`
will guarantee NUL-termination.

Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-22 15:13:21 +02:00
Justin Stitt
7457af8bf9 netfilter: nf_tables: refactor deprecated strncpy
Prefer `strscpy_pad` over `strncpy`.

Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-22 15:13:21 +02:00
Justin Stitt
6cdd75a4a6 netfilter: nf_tables: refactor deprecated strncpy
Prefer `strscpy_pad` over `strncpy`.

Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-22 15:13:21 +02:00
Justin Stitt
e53314034b netfilter: ipset: refactor deprecated strncpy
Use `strscpy_pad` instead of `strncpy`.

Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-22 15:13:20 +02:00