First argument of acpi_*_address_space_handler() APIs is acpi_handle of
the device, which is incorrectly passed in driver ->remove() path here.
Fix it by passing the appropriate argument and while at it, make both
API calls consistent using ACPI_HANDLE().
Fixes: a0b028597d ("pinctrl: cherryview: Add support for GMMR GPIO opregion")
Cc: stable@vger.kernel.org
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308152047.psX1QNDh-lkp@intel.com/
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 446b31e894 ("ASoC: soc-dai.h: remove unused call back functions")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/87a5ujubj0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new module parameter ipc4_ignore_cpc which can be used to force the
kernel to ignore the queried CPC value for all firmware modules and use 0
instead.
The CPC lookup is still done to report missing configurations and the
debug print is going to be different to be explicit that the CPC is ignored
and what was the value we would have used.
The CPC value is sent to the firmware with the MOD_INIT_INSTANCE message
and it is used by the firmware as a parameter for clock scaling.
The flag is intended to be used only when there is a need to validate the
firmware behavior regarding to clock scaling since the 0 CPC value will
force the DSP to run in full speed, disabling the scaling and provides
additional counter point to rule out clock management related issues.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822065419.24374-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The SRC component in a pipeline provides flexibility on the sampling
rate which was not handled previously. This series will improve the
kernel side with the needed logic to be able to deal with the SRC type
of components in pipelines.
Since all the Intel specific platform drivers depend on ACPI, we can
consolidate their config dependency.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Now that the driver core allows for struct class to be in read-only
memory, move the mei_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230811213052.85044-1-ivan.orlov0322@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform_get_irq() is called after ioremap(), if it fails,
iounmap() needs be called in error the path.
Fixes: 2fd84b9b83 ("uio: pruss: fix to check return value of platform_get_irq() in pruss_probe()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230808123827.560603-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's not necessary to use low-level locking helpers here. Use the
higher-level locking helpers and log if the superblock is dying. Since
the caller is assumed to already hold an active reference it isn't
possible to observe a dying superblock.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In case the SAP connection is established before the interface is
added, the mac address is still not set. Don't send the nic info
SAP message in this case since it will result in sending an invalid
mac address. The nic info message will be sent with a valid mac
address when the interface is added.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.a49436bed387.I0ca88d72456e6e9f939bbc2e0c52ffb173fbc97e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The HOST_GOES_DOWN message should be sent even if wiamt is disabled.
Otherwise wiamt may still use the shared memory (e.g. if enabled
later) while it's no longer valid.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.2baad50eb1c3.If7b7c1dc2d6bfc6bacf7f6c72972f19714d9d973@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case CSME holds the NIC and SAP connection is already established,
iwl_pcie_prepare_card_hw() during iwl_pci_probe() will fail
(which is fine since CSME will release the nic later when asked with
a SAP message). In this case tring to grab nic access to read the
crf ids will fail with a warning.
Avoid the warning by only trying to read the crf ids in case prepare
card succeeded.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.9b026fa7b97e.I12bea7e6eef54eeeaf916b68d71583e92ff310fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
LMAC error table address was checked against UMAC
error table minimum address defined. Because of that,
the LMAC error table was not read, since both addresses
belong to different ranges. As addresses are updated from
FW alive message and should be correct, this check is not
needed.
Still keep the check for address 0 to avoid NULL address read.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.08ab1497904d.I270d4c5bcc23c5ecd0b7db475501032c450852ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are occasionally bugs which cause the device to try
to use a TFD that it wasn't supposed to, and these are
very hard to diagnose. Fill all unused TFDs with a debug
command that immediately causes an error to be detected
in these cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.10a9af1ca91f.Ifc790d62c52b4bc9a74c9581610af498509f5759@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need this earlier in the file next, move it up to have
an easier to read change, since this moves other things
in the diff git generates by default.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.c6d798b600bb.I9b891ee3d3dc67822a28e44941409f5b7cb637cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is a bit messy right now, there are functions for both,
but then gen1 function can actually deal with both gen1 and
gen2, due to the confusion about use_tfh/gen2 cleaned up in
the previous patch.
Fix the common paths to call the right functions and remove
handling of gen2 from the gen1 function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.baf23841ec5c.I40702e94b25db05e82f935f14548316f8c6429b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no reason to warn here, it's not an internal consistency
issue, we even use this to check if the device is dead, and if it
read_mem() returns an error that's either because grab NIC access
or memory allocation failed, both of which are already noisy.
Just remove the warning entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.5f4e80eb63cc.Iffd88f63f95575f28e503da13b473724e3341aee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the ifdown function in the dst_ops structure is referenced, the input
parameter 'how' is always true. In the current implementation of the
ifdown interface, ip6_dst_ifdown does not use the input parameter 'how',
xfrm6_dst_ifdown and xfrm4_dst_ifdown functions use the input parameter
'unregister'. But false judgment on 'unregister' in xfrm6_dst_ifdown and
xfrm4_dst_ifdown is false, so remove the input parameter 'how' in ifdown
function.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821084104.3812233-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>