Since 3f9c26210c ("can: error: add definitions for the different CAN
error thresholds") we have proper defines for the various CAN error
thresholds. So make use of it and replace 256 by
CAN_BUS_OFF_THRESHOLD.
Link: https://lore.kernel.org/all/20240304074503.3584662-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The structure gs_device_mode dm::mode is a __le32, use cpu_to_le32()
to assign GS_CAN_MODE_RESET.
As GS_CAN_MODE_RESET is 0x0, this is basically a no-op.
Link: https://lore.kernel.org/all/20240304074540.3584842-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Support for the Samsung Galaxy Tab 4 10.1 LTE is added.
On MSM8226 CPU, SAW and ACC nodes are introduced to enable SMP support.
Watchdog definition is also added, and all nodes are sorted and cleaned
up.
rmtfs memory is defined on HTC One Mini 2, vibrator support is addedto
LG G Watch R, touch keycodes are defined for Samsung Galaxy Tab 4.
The Samsung Galaxy Tab 4 DeviceTree is refactored to allow more variants
to be introduced easily.
The SAW nodes across APQ8064, IPQ8064, MSM8960 and MSM8974 are updated
based on recent work on the binding and driver.
On IPQ8064 SAW nodes are cleaned up, and unused reset-names is dropped
from DWC3.
On MSM8960 GSBI3 and the I2C bus therein is introduced, in order to
introduce touchscreen support on the Samsung Galaxy Express SGH-I437.
gpio-keys are introduced on the same.
On MSM8974 the QFPROM register size is corrected. The order of the
clocks in the SDX65 DWC3 node is corrected to match the binding.
For a variety of platforms interrupt-related constants are replaced
with defined.
The mach-qcom Kconfig options are cleaned up, to avoid unnecessary
per-platform options.
-----BEGIN PGP SIGNATURE-----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=DIsx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Qs5q
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm32-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree changes for v6.9
Support for the Samsung Galaxy Tab 4 10.1 LTE is added.
On MSM8226 CPU, SAW and ACC nodes are introduced to enable SMP support.
Watchdog definition is also added, and all nodes are sorted and cleaned
up.
rmtfs memory is defined on HTC One Mini 2, vibrator support is addedto
LG G Watch R, touch keycodes are defined for Samsung Galaxy Tab 4.
The Samsung Galaxy Tab 4 DeviceTree is refactored to allow more variants
to be introduced easily.
The SAW nodes across APQ8064, IPQ8064, MSM8960 and MSM8974 are updated
based on recent work on the binding and driver.
On IPQ8064 SAW nodes are cleaned up, and unused reset-names is dropped
from DWC3.
On MSM8960 GSBI3 and the I2C bus therein is introduced, in order to
introduce touchscreen support on the Samsung Galaxy Express SGH-I437.
gpio-keys are introduced on the same.
On MSM8974 the QFPROM register size is corrected. The order of the
clocks in the SDX65 DWC3 node is corrected to match the binding.
For a variety of platforms interrupt-related constants are replaced
with defined.
The mach-qcom Kconfig options are cleaned up, to avoid unnecessary
per-platform options.
* tag 'qcom-arm32-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
ARM: dts: qcom: samsung-matisse-common: Add UART
ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
ARM: dts: qcom: msm8960: declare SAW2 regulators
ARM: dts: qcom: apq8064: declare SAW2 regulators
ARM: dts: qcom: ipq8064: rename SAW nodes to power-manager
ARM: dts: qcom: ipq4019: rename SAW nodes to power-manager
ARM: dts: qcom: msm8974: rename SAW nodes to power-manager
ARM: dts: qcom: msm8960: rename SAW nodes to power-manager
ARM: dts: qcom: apq8084: rename SAW nodes to power-manager
ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
ARM: dts: qcom: ipq8064: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: ipq4019: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: msm8960: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: msm8974: use new compat string for L2 SAW2 unit
ARM: dts: qcom: apq8084: use new compat string for L2 SAW2 unit
...
Link: https://lore.kernel.org/r/20240304033507.89751-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X.
Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and
rk356x video-decoder (missing interrupt-names).
Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi
R2 Pro (discussed with DT-maintainers beforehand of course).
The VO1-GRF syscon needs its clock to work, and that clock also needed to
be actually exported forst, so we're sharing a branch with the Rockchip
clock-tree (that already got merged into the main clock-tree for 6.9) for
this small shared code.
And as another step on the long road to graphics output on rk3588, 6.9 will
get the hdmi-phy via the phy-tree, so here the dts node is added.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmXjFSEQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZ12CACL8EGrdL32f+Yg+4pgKiC79C0WFh05F56I
KAgK4nRs3IjOR8zRUx5Wez3uKd7vbH/3GhqSurJQ894FNqpOKYJ48cnokaG/hUV3
dimEr5dPcSZGVdRcaQRH+B7Pe5hFmw98dZxIDfWOZzZ4XwShcfDYFx6xlGmcba+e
KyMwjrVHyjh3M384yDx14oJw8bqn2b+oFFaZxCoz93zX9g1FUFbF6IuOsJ0KXXDR
SRHP+s2jGxUyBltsXyQc4sa4e9i8hDbAZuBwgozLReSgTy+GJqxj87pcsc/4uCAE
w8MW9RW/xwuFrU+BLs0UNOtdSn8BdHjEyEFc0SEtFAW9HVtoCozP
=awlr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SbMB
-----END PGP SIGNATURE-----
Merge tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Initial support for the rk3568 Qnap TS433 NAS, the rk3588-based Tiger SoM
from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X.
Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and
rk356x video-decoder (missing interrupt-names).
Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi
R2 Pro (discussed with DT-maintainers beforehand of course).
The VO1-GRF syscon needs its clock to work, and that clock also needed to
be actually exported forst, so we're sharing a branch with the Rockchip
clock-tree (that already got merged into the main clock-tree for 6.9) for
this small shared code.
And as another step on the long road to graphics output on rk3588, 6.9 will
get the hdmi-phy via the phy-tree, so here the dts node is added.
* tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm64: dts: rockchip: Add basic support for QNAP TS-433
dt-bindings: arm: rockchip: Add QNAP TS-433
arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM
arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM
dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard
arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s
arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588
dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X
arm64: dts: rockchip: Add devicetree support for TB-RK3588X board
arm64: dts: rockchip: adjust vendor on orangepi rk3399 board
arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro
dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board
arm64: dts: rockchip: Add HDMI0 PHY to rk3588
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
Link: https://lore.kernel.org/r/3695004.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add mmc support for AC5
Reorder crypto interrupts on Armada 3720
Use the correct thermal coefficients for the Armada AP807 dies
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCZeH6zwAKCRALBhiOFHI7
1TA2AJsH7gju8yblpbWaKqTQ2JEW2PNXfQCgqO/AL5wXAUQbZ3VuXztF0is1zK8=
=gF/G
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kYOG
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.9 (part 1)
Add mmc support for AC5
Reorder crypto interrupts on Armada 3720
Use the correct thermal coefficients for the Armada AP807 dies
* tag 'mvebu-dt64-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: armada-ap807: update thermal compatible
arm64: dts: marvell: reorder crypto interrupts on Armada SoCs
arm64: dts: ac5: add mmc node and clock
Link: https://lore.kernel.org/r/87a5nihr8g.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When not configured for wakeup lis3lv02d_i2c_suspend() will call
lis3lv02d_poweroff() even if the device has already been turned off
by the runtime-suspend handler and if configured for wakeup and
the device is runtime-suspended at this point then it is not turned
back on to serve as a wakeup source.
Before commit b1b9f7a494 ("misc: lis3lv02d_i2c: Add missing setting
of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable
the regulators which as a side effect made calling poweroff() twice ok.
Now that poweroff() correctly disables the regulators, doing this twice
triggers a WARN() in the regulator core:
unbalanced disables for regulator-dummy
WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable
...
Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if
already runtime-suspended and add a poweron() call when necessary to
make wakeup work.
lis3lv02d_i2c_resume() has similar issues, with an added weirness that
it always powers on the device if it is runtime suspended, after which
the first runtime-resume will call poweron() again, causing the enabled
count for the regulator to increase by 1 every suspend/resume. These
unbalanced regulator_enable() calls cause the regulator to never
be turned off and trigger the following WARN() on driver unbind:
WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put
Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().
Fixes: b1b9f7a494 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HV_REGISTER_ are used as arguments to hv_set/get_register(), which
delegate to arch-specific mechanisms for getting/setting synthetic
Hyper-V MSRs.
On arm64, HV_REGISTER_ defines are synthetic VP registers accessed via
the get/set vp registers hypercalls. The naming matches the TLFS
document, although these register names are not specific to arm64.
However, on x86 the prefix HV_REGISTER_ indicates Hyper-V MSRs accessed
via rdmsrl()/wrmsrl(). This is not consistent with the TLFS doc, where
HV_REGISTER_ is *only* used for used for VP register names used by
the get/set register hypercalls.
To fix this inconsistency and prevent future confusion, change the
arch-generic aliases used by callers of hv_set/get_register() to have
the prefix HV_MSR_ instead of HV_REGISTER_.
Use the prefix HV_X64_MSR_ for the x86-only Hyper-V MSRs. On x86, the
generic HV_MSR_'s point to the corresponding HV_X64_MSR_.
Move the arm64 HV_REGISTER_* defines to the asm-generic hyperv-tlfs.h,
since these are not specific to arm64. On arm64, the generic HV_MSR_'s
point to the corresponding HV_REGISTER_.
While at it, rename hv_get/set_registers() and related functions to
hv_get/set_msr(), hv_get/set_nested_msr(), etc. These are only used for
Hyper-V MSRs and this naming makes that clear.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com>
The threads data structure is an array of hashmaps, previously
rbtrees. The two levels allows for a fixed outer array where access is
guarded by rw_semaphores. Commit 91e467bc56 ("perf machine: Use
hashtable for machine threads") sized the outer table at 256 entries
to avoid future scalability problems, however, this means the threads
struct is sized at 30,720 bytes. As the hashmaps allow O(1) access for
the common find/insert/remove operations, lower the number of entries
to 8. This reduces the size overhead to 960 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-8-irogers@google.com
The rbtree provides a sorting on entries but this is unused. Switch to
using hashmap for O(1) rather than O(log n) find/insert/remove
complexity.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-7-irogers@google.com
Move threads out of machine and into its own file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-6-irogers@google.com
Move thread_rb_node into the machine.c file. This hides the
implementation of threads from the rest of the code allowing for it to
be refactored.
Locking discipline is tightened up in this change. As the lock is now
encapsulated in threads, the findnew function requires holding it (as
it already did in machine). Rather than do conditionals with locks
based on whether the thread should be created (which could potentially
be error prone with a read lock match with a write unlock), have a
separate threads__find that won't create the thread and only holds the
read lock. This effectively duplicates the findnew logic, with the
existing findnew logic only operating under a write lock assuming
creation is necessary as a previous find failed. The creation may
still fail with the write lock due to another thread. The duplication
is removed in a later next patch that delegates the implementation to
hashtable.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-5-irogers@google.com
Avoid exposing the threads data structure by switching to the callback
machine__for_each_thread approach. machine__fprintf is only used in
tests and verbose >3 output so don't turn to list and sort. Add
machine__threads_nr to be refactored later.
Note, all existing *_fprintf routines ignore fprintf errors.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-4-irogers@google.com
Commit 91e467bc56 ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf trace
--summary output sorts and prints each hash bucket, rather than all
threads globally. Change this behavior by turn all threads into a
list, sort the list by number of trace events then by tids, finally
print the list. This also allows the rbtree in threads to be not
accessed outside of machine.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-3-irogers@google.com
Commit 91e467bc56 ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf report
--tasks output now shows child threads in an order determined by the
hashing. For example, in this snippet tid 3 appears after tid 256 even
though they have the same ppid 2:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
2 2 0 | kthreadd
256 256 2 | kworker/12:1H-k
693761 693761 2 | kworker/10:1-mm
13017621301762 2 | kworker/1:1-mm_
1302530 1302530 2 | kworker/u32:0-k
3 3 2 | rcu_gp
...
```
The output is easier to read if threads appear numerically
increasing. To allow for this, read all threads into a list then sort
with a comparator that orders by the child task's of the first common
parent. The list creation and deletion are created as utilities on
machine. The indentation is possible by counting the number of
parents a child has.
With this change the output for the same data file is now like:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
1 1 0 | systemd
823 823 1 | systemd-journal
853 853 1 | systemd-udevd
3230 3230 1 | systemd-timesyn
3236 3236 1 | auditd
3239 3239 3236 | audisp-syslog
3321 3321 1 | accounts-daemon
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-2-irogers@google.com
L3PMCx0AC and L3PMCx0AD, used in l3_xi_sampled_latency* events, have a
quirk that requires them to be programmed with SliceId set to 0x3.
Without this, the events do not count at all and affects dependent
metrics such as l3_read_miss_latency.
If ThreadMask is not specified, the amd-uncore driver internally sets
ThreadMask to 0x3, EnAllCores to 0x1 and EnAllSlices to 0x1 but does
not set SliceId. Since SliceId must also be set to 0x3 in this case,
specify all the other fields explicitly.
E.g.
$ sudo perf stat -e l3_xi_sampled_latency.all,l3_xi_sampled_latency_requests.all -a sleep 1
Before:
Performance counter stats for 'system wide':
0 l3_xi_sampled_latency.all
0 l3_xi_sampled_latency_requests.all
1.005155399 seconds time elapsed
After:
Performance counter stats for 'system wide':
921,446 l3_xi_sampled_latency.all
54,210 l3_xi_sampled_latency_requests.all
1.005664472 seconds time elapsed
Fixes: 5b2ca349c3 ("perf vendor events amd: Add Zen 4 uncore events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ananth.narayan@amd.com
Cc: ravi.bangoria@amd.com
Cc: eranian@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301084431.646221-1-sandipan.das@amd.com
This is useful for scripts that work with Perf and ETM trace. Rather
than them trying to parse Perf's error output at runtime to see if it
was linked or not.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: al.grant@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301133829.346286-1-james.clark@arm.com
Xiaomi Pad 5 Pro has a 2560x1600 portrait screen, set RIGHT_UP rotation
to make it look like a landscape screen.
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240227121744.10918-1-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add missing kerneldoc to silence:
qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_root' not described in 'qmp'
qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_files' not described in 'qmp'
Fixes: d51d984c55 ("soc: qcom: aoss: Add debugfs interface for sending messages")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240225202545.59113-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The following table shows the values of the 'halt_reg' and the
'enable_reg' fields from the pcie clocks defined in the current
driver:
clock halt_reg enable_reg
gcc_pcie0_ahb_clk 0x75010 0x75010
gcc_pcie0_aux_clk 0x75014 0x75014
gcc_pcie0_axi_m_clk 0x75008 0x75008
gcc_pcie0_axi_s_bridge_clk 0x75048 0x75048
gcc_pcie0_axi_s_clk 0x7500c 0x7500c
gcc_pcie0_pipe_clk 0x75018 0x75018
gcc_pcie1_ahb_clk 0x76010 0x76010
gcc_pcie1_aux_clk 0x76014 0x76014
gcc_pcie1_axi_m_clk 0x76008 0x76008
gcc_pcie1_axi_s_bridge_clk 0x76048 0x76048
gcc_pcie1_axi_s_clk 0x7600c 0x7600c
gcc_pcie1_pipe_clk 8* 0x76018
Based on the table, it is quite likely that the pcie0 and the pci1
clocks are using the same register layout, however it seems that
the value of the 'halt_reg' field in the 'gcc_pcie1_pipe_clk' clock
is wrong.
In the downstream driver [1], the same '0x76018' value is used for
both the 'halt_reg' and for the 'enable_reg' fields of the
'gcc_pcie1_pipe_clk' clock.
Update the current driver to use the same value used downstream as
probably that is the correct value.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L2316
Fixes: e3fdbef1ba ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-2-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The value of the 'enable_reg' field in the 'gcc_gmac0_sys_clk'
clock definition seems wrong as it is greater than the
'max_register' value defined in the regmap configuration.
Additionally, all other gmac specific branch clock definitions
within the driver uses the same value both for the 'enable_reg'
and for the 'halt_reg' fields.
Due to the lack of documentation the correct value is not known.
Looking into the downstream driver does not help either, as that
uses the same (presumably wrong) value [1].
Nevertheless, change the 'enable_reg' field of 'gcc_gmac0_sys_clk'
to use the value from the 'halt_reg' field so it follows the pattern
used in other gmac clock definitions. The change is based on the
assumption that the register layout of this clock is the same
as the other gmac clocks.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L1889
Fixes: e3fdbef1ba ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-1-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The newly added code causes a build failure when -Werror is set:
drivers/soc/qcom/spm.c:388:12: error: 'spm_get_cpu' defined but not used [-Werror=unused-function]
Remove the #ifdef and instead use an IS_ENABLED() check that lets the
compiler perform dead code elimination instead of the preprocessor.
Fixes: 6496dba142 ("soc: qcom: spm: add support for voltage regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240221154457.2007420-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The actual size of the channels registers region is 4MB, according to the
documentation. This issue was not caught until now because the driver was
supposed to allow same regions being mapped multiple times for supporting
multiple buses. Thie driver is using platform_get_resource_byname() and
devm_ioremap() towards that purpose, which intentionally avoids
devm_request_mem_region() altogether.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240221-dts-qcom-sm8550-fix-spmi-chnls-size-v2-2-72b5efd9dc4f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The actual size of the channels registers region is 4MB, according to the
documentation. This issue was not caught until now because the driver was
supposed to allow same regions being mapped multiple times for supporting
multiple buses. Thie driver is using platform_get_resource_byname() and
devm_ioremap() towards that purpose, which intentionally avoids
devm_request_mem_region() altogether.
Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240221-dts-qcom-sm8550-fix-spmi-chnls-size-v2-1-72b5efd9dc4f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 09896da073 ("arm64: dts: qcom: msm8996: Hook up MPM") has
hooked up the MPM irq chip on the MSM8996 platform. However this causes
my Dragonboard 820c crash during bootup (usually when probing IOMMUs).
Revert the offending commit for now. Quick debug shows that making
tlmm's wakeup-parent point to the MPM is enough to trigger the crash.
Fixes: 09896da073 ("arm64: dts: qcom: msm8996: Hook up MPM")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240221-msm8996-revert-mpm-v1-1-cdca9e30c9b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use rxrpc_txbuf::kvec[0] instead of rxrpc_txbuf::wire to gain access to the
Rx protocol header. In future, the wire header will be stored in a page
frag, not in the rxrpc_txbuf struct making it possible to use
MSG_SPLICE_PAGES when sending it.
Similarly, access the ack header as being immediately after the wire header
when filling out an ACK packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Now that the driver core can properly handle constant struct bus_type,
move the serio_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240210-bus_cleanup-input2-v1-2-0daef7e034e0@marliere.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that the driver core can properly handle constant struct bus_type,
move the variable rmi_bus_type to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240210-bus_cleanup-input2-v1-1-0daef7e034e0@marliere.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The existing comment block above the xps2_of_probe function
does not conform to the kernel-doc standard. This patch fixes the
documentation to match the expected kernel-doc format, which includes
a structured documentation header with param and return value.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240301092115.123092-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
IST3032C is a touchscreen chip used for instance in the
samsung,coreprimevelte smartphone, with which this was tested. Add the
chip specific information to the driver.
Reviewed-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-6-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
IST3032C is a touchscreen IC which seems mostly compatible with IST3038C
except that it reports a different chip ID value.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-5-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038B is another variant of Imagis IST3038 IC, which has
a different register interface from IST3038C (possibly firmware defined).
This should also work for IST3044B (though untested), however other
variants using this interface/protocol(IST3026, IST3032, IST3026B,
IST3032B) have a different format for coordinates, and they'd need
additional effort to be supported by this driver.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-4-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038B is a variant (firmware?) of Imagis IST3038 IC
differing from IST3038C in its register interface. Add the
compatible for it to the IST3038C bindings.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
[balejk@matfyz.cz: elaborate chip differences in the commit message]
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-3-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As specified in downstream IST3038B driver and proved by testing,
the correct maximum reported value of touch area is 16.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-2-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add additional HyperX device identifiers to xpad_device and xpad_table.
Suggested-by: Chris Toledanes<chris.toledanes@hp.com>
Reviewed-by: Carl Ng <carl.ng@hp.com>
Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/44ad5ffa-76d8-4046-94ee-2ef171930ed2@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In a follow-up patch implementation of the LED audio trigger will be
moved to sound/core/snd_ctl_led, including removal of config symbol
LEDS_AUDIO_TRIGGER. Also as of today the audio mute LED trigger
is effectively a no-op w/o config symbol SND_CTL_LED being defined.
Therefore switch the dependency to this config symbol.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/6011ca63-187c-42dd-a5fd-7dd733d6257c@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
