Driver fixes for:
- dw-edma fixes to improve driver and remote HDMA setup
- fsl-edma fixes for SoC hange, irq init and byte calculations
and sparse fixes
- idxd: safe user copy of completion record fix
- ptdma: consistent DMA mask fix
-----BEGIN PGP SIGNATURE-----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=mX0o
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- dw-edma fixes to improve driver and remote HDMA setup
- fsl-edma fixes for SoC hange, irq init and byte calculations and
sparse fixes
- idxd: safe user copy of completion record fix
- ptdma: consistent DMA mask fix
* tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ptdma: use consistent DMA masks
dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
dmaengine: idxd: Ensure safe user copy of completion record
dmaengine: fsl-edma: correct max_segment_size setting
dmaengine: idxd: Remove shadow Event Log head stored in idxd
dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
dmaengine: fsl-qdma: init irq after reg initialization
dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: Add HDMA remote interrupt configuration
dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
dmaengine: dw-edma: Fix the ch_count hdma callback
- Fix IOMMU table initialisation when doing kdump over SR-IOV.
- Fix incorrect RTAS function name for resetting TCE tables.
- Fix fpu_signal selftest failures since a recent change.
Thanks to: Gaurav Batra, Nathan Lynch.
-----BEGIN PGP SIGNATURE-----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=MSDF
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
be used by kexec only
- Make sure MKTME feature detection happens at an earlier time in the
boot process so that the physical address size supported by the CPU is
properly corrected and MTRR masks are programmed properly, leading to
TDX systems booting without disable_mtrr_cleanup on the cmdline
- Make sure the different address sizes supported by the CPU are read
out as early as possible
-----BEGIN PGP SIGNATURE-----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=fmsi
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should
be used by kexec only
- Make sure MKTME feature detection happens at an earlier time in the
boot process so that the physical address size supported by the CPU
is properly corrected and MTRR masks are programmed properly, leading
to TDX systems booting without disable_mtrr_cleanup on the cmdline
- Make sure the different address sizes supported by the CPU are read
out as early as possible
* tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/e820: Don't reserve SETUP_RNG_SEED in e820
x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()
Let Japanese translation of howto.rst in the language drop-down list
by moving it to the expected place.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Tsugikazu Shibata <shibata@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <b175c52f-34ee-4753-b172-e57fee6fcc30@gmail.com>
During review (see Link), Jani Nikula suggested to use proper subheadings
instead of using italics to indicate the different new top-level
categories in the checklist. Further the top heading should follow the
common scheme.
Use subheadings. Adjust to common heading adornment.
Link: https://lore.kernel.org/linux-doc/87o7c3mlwb.fsf@intel.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240229030743.9125-3-lukas.bulwahn@gmail.com>
While going through the submit checklist, the list order seemed rather
random, probably just by historical coincidences of always adding yet the
next point someone thought of at the end of the list.
Structure and order them by the category of such activity,
reviewing, documenting, checking with tools, building and testing.
As the diff of the reordering is large:
Review code now includes previous points 1, 5 and 22.
Review Kconfig includes previous 6, 7 and 8.
Documenting includes previous 11, 15, 16, 17, 18 and 23.
Checking with tools includes previous 5, 9 and 10.
Building includes previous 2, 3, 20 and 24.
Testing includes previous 12, 13, 14, 19 and 21.
Previous point 4 (compile for ppc64) was merged into point 3 (build for
many architectures), as it was just a further note to cross-compiling.
Previous point 5 was split into one in review and one in checking
to have every previous point in the right category.
Point 11 was shortened, as building documentation is mentioned already
in Build your code, 1d.
A note that was presented visually much too aggressive in the HTML view was
turned into a simple "Note that..." sentence in the enumeration.
The recommendation to test with the -mm patchset (previous 21, now
testing, point 5) was updated to the current state of affairs to test with
a recent tag of linux-next.
Note that the previous first point still remains the first list even after
reordering. Randy confirmed that it was important to Stephen Rothwell to
keep 'include what you use' to be the first in the list.
While at it, replace the reference to the obsolete CONFIG_DEBUG_SLAB with
CONFIG_SLUB_DEBUG.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240229030743.9125-2-lukas.bulwahn@gmail.com>
Add a second document on bisecting regressions explaining the whole
process from beginning to end -- while also describing how to validate
if a problem is still present in mainline. This "two in one" approach
is possible, as checking whenever a bug is in mainline is one of the
first steps before performing a bisection anyway and thus needs to be
described. Due to this approach the text also works quite nicely in
conjunction with Documentation/admin-guide/reporting-issues.rst, as it
covers all typical cases where users will need to build a kernel in
exactly the same order.
The text targets users that normally run kernels from their Linux
distributor who might never have compiled their own kernel.
This aim is why the first kernel built while following this guide is
generated from the latest mainline codebase. This will rule out that the
regression (a) was fixed already and (b) is caused by config change a
vendor distributor performed; checking mainline will furthermore (c)
determine if the issue is something that needs to be reported to the
regular developers or the stable team (this is needed even when readers
bisect within a stable series).
Only then are readers instructed to build their own variant of the
'good' kernel to validate the trimmed .config file created during early
in the guide, as performing a bisection with a broken one would be a
waste of time. There is a small downside of this order: readers might
have to go back to testing mainline, if it turns out there is a problem
with their .config. But that should be rare -- and if the regression was
already fixed readers might not get to this point anyway. Hence in the
end this order should mean that readers built less kernels overall.
This sequence allows the text to easily cover the "check if a bug is
present in the upstream kernel" case while only making things a tiny bit
more complicated.
The text tries to prevent readers from running into many mistakes users
are known to frequently make. The steps required for this might look
superfluous for people that are already familiar with bisections -- but
anyone with that knowledge should be able to adapt the instructions to
their use-case or will not need this text at all.
Style and structure of the text match the one
Documentation/admin-guide/quickly-build-trimmed-linux.rst uses. Quite a
few paragraphs are even copied from there and not changed at all or only
slightly. This will complicate maintenance, as some future changes to
one of these documents will have to be replicated in the other. But this
is the lesser evil: solutions like "sending readers from one document
over to the other" or "extracting the common parts into a separate
document" might work in other cases, but would be too confusing here
given the topic and the target audience.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
[jc: Undo spurious removal of subsection header line]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <02b084a06de4ad61ac4ecd92b9265d4df4d03d71.1709282441.git.linux@leemhuis.info>
As discussed (see Links), there is some inertia to move to the recent
Sphinx versions for the doc build environment.
As first step, drop the version constraints and the related comments. As
sphinx depends on jinja2, jinja2 is pulled in automatically. So drop that.
Then, the sphinx-pre-install script will fail though with:
Can't get default sphinx version from ./Documentation/sphinx/requirements.txt at ./scripts/sphinx-pre-install line 305.
The script simply expects to parse a version constraint with Sphinx in the
requirements.txt. That version is used in the script for suggesting the
virtualenv directory name.
To suggest a virtualenv directory name, when there is no version given in
the requirements.txt, one could try to guess the version that would be
downloaded with 'pip install -r Documentation/sphinx/requirements.txt'.
However, there seems no simple way to get that version without actually
setting up the venv and running pip. So, instead, name the directory with
the fixed name 'sphinx_latest'.
Finally update the Sphinx build documentation to reflect this directory
name change.
Link: https://lore.kernel.org/linux-doc/874jf4m384.fsf@meer.lwn.net/
Link: https://lore.kernel.org/linux-doc/20240226093854.47830-1-lukas.bulwahn@gmail.com/
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240301141800.30218-1-lukas.bulwahn@gmail.com>
Now that Sphinx 2.4.4 or better is required, get rid of
\providecommand{}'s for compatibility with Sphinx 1.7.9.
While at it, reword the comment on \sphinxtableofcontentshook
for better description of why it needs to be emptied.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <ed1ec6f2-0050-46f6-807d-8679f26427e9@gmail.com>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
sdw_master_type and sdw_slave_type variables to be constant structures as
well, placing it into read-only memory which can not be modified at
runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240219-device_cleanup-soundwire-v1-1-9edd51767611@marliere.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There are currently a couple of objects (`alloc_head` and `bundle`) in
`struct bundle_priv` that contain a couple of flexible structures:
struct bundle_priv {
/* Must be first */
struct bundle_alloc_head alloc_head;
...
/*
* Must be last. bundle ends in a flex array which overlaps
* internal_buffer.
*/
struct uverbs_attr_bundle bundle;
u64 internal_buffer[32];
};
So, in order to avoid ending up with a couple of flexible-array members
in the middle of a struct, we use the `struct_group_tagged()` helper to
separate the flexible array from the rest of the members in the flexible
structures:
struct uverbs_attr_bundle {
struct_group_tagged(uverbs_attr_bundle_hdr, hdr,
... the rest of the members
);
struct uverbs_attr attrs[];
};
With the change described above, we now declare objects of the type of
the tagged struct without embedding flexible arrays in the middle of
another struct:
struct bundle_priv {
/* Must be first */
struct bundle_alloc_head_hdr alloc_head;
...
struct uverbs_attr_bundle_hdr bundle;
u64 internal_buffer[32];
};
We also use `container_of()` whenever we need to retrieve a pointer
to the flexible structures.
Notice that the `bundle_size` computed in `uapi_compute_bundle_size()`
remains the same.
So, with these changes, fix the following warnings:
drivers/infiniband/core/uverbs_ioctl.c:45:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
45 | struct bundle_alloc_head alloc_head;
| ^~~~~~~~~~
drivers/infiniband/core/uverbs_ioctl.c:67:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
67 | struct uverbs_attr_bundle bundle;
| ^~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZeIgeZ5Sb0IZTOyt@neat
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add "starfive,jh8100-wdt" compatible string for StarFive's JH8100
watchdog.
Since JH8100 watchdog only has 1 reset signal, update binding
document to support one reset for "starfive,jh8100-wdt" compatible.
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231221084358.3458713-2-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The driver never sets a default timeout value, therefore it is
initialized to zero. When CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is
enabled, the watchdog is started during probe. The kernel is supposed to
automatically ping the watchdog from this point until userspace takes
over, but this does not happen if the configured timeout is zero. A zero
timeout causes watchdog_need_worker() to return false, so the heartbeat
worker does not run and the system therefore resets soon after the
driver is probed.
This patch fixes this by setting an arbitrary non-zero default timeout.
The default could be read from the hardware instead, but I didn't see
any reason to add this complexity.
This has been tested on an STM32F746.
Fixes: 85fdc63fe2 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240228182723.12855-1-ben.wolsieffer@hefring.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The reset signal needs to be deasserted before operation of sp805
module. Document in the binding.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240221-hisi-wdt-v3-2-9642613dc2e6@outlook.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
According to the datasheet, the core has an WDOGRESn input signal that
needs to be deasserted before being operational. Implement it in the
driver.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240221-hisi-wdt-v3-1-9642613dc2e6@outlook.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
System resume will start and enable watchdog regardless of whether the
watchdog is enabled/disabled during a system suspend.
Add a check to the watchdog status and only start and enable the
watchdog if the watchdog status is running/active.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240130055118.1917086-1-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
In the probe function, pm_runtime_put_sync() will fail on platform with
runtime PM disabled.
Check if runtime PM is enabled before calling pm_runtime_put_sync() to
fix it.
Fixes: db728ea9c7 ("drivers: watchdog: Add StarFive Watchdog driver")
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240119082722.1133024-1-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
To determine the max_timeout value, the below calculation is used.
max_timeout = 0x10000000 / clk_rate
cat /sys/devices/platform/soc@0/b017000.watchdog/watchdog/watchdog0/max_timeout
8388
However, this is not valid for all the platforms. IPQ SoCs starting from
IPQ40xx and recent Snapdragron SoCs also has the bark and bite time field
length of 20bits, which can hold max up to 32 seconds if the clk_rate is
32KHz.
If the user tries to configure the timeout more than 32s, then the value
will be truncated and the actual value will not be reflected in the HW.
To avoid this, lets add a variable called max_tick_count in the device data,
which defines max counter value of the WDT controller. Using this, max-timeout
will be calculated in runtime for various WDT contorllers.
With this change, we get the proper max_timeout as below and restricts
the user from configuring the timeout higher than this.
cat /sys/devices/platform/soc@0/b017000.watchdog/watchdog/watchdog0/max_timeout
32
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240116-wdt-v2-1-501c7694c3f0@quicinc.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The wdt_set_timeout function lacked a complete kernel-doc
description. This patch adds missing parameter and return
value descriptions in accordance with kernel-doc standards.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Guenter Roeck <linux@roeckus.net>
Link: https://lore.kernel.org/r/20240206093857.62444-1-yang.lee@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range()/ida_alloc_max() is inclusive. So a -1 has been added when
needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/bc5b82db59ccac69f2612ba104e2f5100401a862.1705009009.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Currently, congestion control algorithm is statically configured in
FW, and all QPs use the same algorithm(except UD which has a fixed
configuration of DCQCN). This is not flexible enough.
Support userspace configuring congestion control algorithm with QP
granularity while creating QPs. If the algorithm is not specified in
userspace, use the default one.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240301104845.1141083-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
cpu-as-y is there to force assembler building options. But there is no
need for that. GCC is passed the necessary options and it automatically
pass the appropriate option to GAS.
GCC is given -maltivec when relevant, so no need for -Wa,-maltivec
either.
And -Wa,-many is wrong as it will hide innapropriate instructions.
Better to detect them and handle them on a case by case basis.
The setting of -Wa,-many was added by commit 960e300298
("powerpc/Makefile: Fix PPC_BOOK3S_64 ASFLAGS") in order to fix an issue
with clang and the passed -Wa,-mpower4 option. But we have now removed
it expecting the compiler to automatically pass the proper options and
instructions based on -mcpu=power4.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-5-mpe@ellerman.id.au
With the addition of the machine directives, these are no longer simple
1-2 liner macros. So modernise them to be static inlines and use named
asm parameters.
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-4-mpe@ellerman.id.au
Binutils 2.38 complains about the use of mfpmr when building
ppc6xx_defconfig:
CC arch/powerpc/kernel/pmc.o
{standard input}: Assembler messages:
{standard input}:45: Error: unrecognized opcode: `mfpmr'
{standard input}:56: Error: unrecognized opcode: `mtpmr'
This is because by default the kernel is built with -mcpu=powerpc, and
the mt/mfpmr instructions are not defined.
It can be avoided by enabling CONFIG_E300C3_CPU, but just adding that to
the defconfig will leave open the possibility of randconfig failures.
So add machine directives around the mt/mfpmr instructions to tell
binutils how to assemble them.
Cc: stable@vger.kernel.org
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-3-mpe@ellerman.id.au
There are multiple decodings for the "dcbt" mnemonic, so the assembler
has to pick one.
That requires passing -many to the assembler, which is not recommended.
Without -many the clang 14 / binutils 2.38 build fails with:
arch/powerpc/kernel/exceptions-64s.S:2976: Error: junk at end of line: `0b01010'
clang: error: assembler command failed with exit code 1 (use -v to see invocation)
Fix it by adding .machine directives around the use of dcbt to specify
which encoding is desired.
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-2-mpe@ellerman.id.au
There's an almost identical code sequence to specify load/store access
hints in __copy_tofrom_user_power7(), copypage_power7() and
memcpy_power7().
Move the sequence into a common macro, which is passed the registers to
use as they differ slightly.
There also needs to be a copy in the selftests, it could be shared in
future if the headers are cleaned up / refactored.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-1-mpe@ellerman.id.au
This part was commented from commit 6d492ecc64
("powerpc/THP: Add code to handle HPTE faults for hugepages")
in about 11 years before.
If there are no plans to enable this part code in the future,
we can remove this dead code and replace with a comment
explaining what the dead code was trying to say.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Suggested-by: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240301085834.1512921-1-chentao@kylinos.cn
Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
in one of the system throws below error:
---Logs---
# perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event]
# perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel.
failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
Performance counter stats for 'system wide':
<not supported> hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
2.000700771 seconds time elapsed
The above error is because of the hcall failure as required
permission "Enable Performance Information Collection" is not set.
Based on current code, single_gpci_request function did not check the
error type incase hcall fails and by default returns EINVAL. But we can
have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with
detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly.
Fix this issue by adding new checks in the single_gpci_request and
h_gpci_event_init functions.
Result after fix patch changes:
# perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Error:
No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event.
Fixes: 220a0c609a ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface")
Reported-by: Akanksha J N <akanksha@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122847.101162-1-kjain@linux.ibm.com
Allow a transition from the softirq stack to the hardirq stack when
handling a hardirq. Doing so means a hardirq received while deep in
softirq processing is less likely to cause a stack overflow of the
softirq stack.
Previously it wasn't safe to do so because irq_exit() (which initiates
softirq processing) was called on the hardirq stack.
That was changed in commit 1b1b6a6f4c ("powerpc: handle irq_enter/
irq_exit in interrupt handler wrappers") and 1346d00e1b ("powerpc:
Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK").
The allowed transitions are now:
- process stack -> hardirq stack
- process stack -> softirq stack
- process stack -> softirq stack -> hardirq stack
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130125045.3080961-1-mpe@ellerman.id.au
Replace all usages of of_root by of_find_node_by_path("/")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-5-mpe@ellerman.id.au
Most probe functions that do not use the 'compatible' string do
nothing else than checking whether the machine is compatible with
one of the strings in a NULL terminated table of strings.
Define that table of strings in ppc_md structure and check it directly
from probe_machine() instead of using ppc_md.probe() for that.
Keep checking in ppc_md.probe() only for more complex probing.
All .compatible could be replaced with a single element NULL
terminated list but that's not worth the churn. Can be do incrementaly
in follow-up patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-4-mpe@ellerman.id.au
of_machine_compatible_match() works with a table of strings.
of_machine_is_compatible() is a simplier version with only one string.
Re-implement of_machine_is_compatible() by setting a table of strings
with a single string then using of_machine_compatible_match().
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-3-mpe@ellerman.id.au
of_machine_is_compatible() currently returns a positive integer if it
finds a match. However none of the callers ever check the value, they
all treat it as a true/false.
So change of_machine_is_compatible() to return bool, which will allow
the implementation to be changed in a subsequent patch.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-2-mpe@ellerman.id.au
We have of_machine_is_compatible() to check if a machine is compatible
with a single compatible string. However some code is able to support
multiple compatible boards, and so wants to check for one of many
compatible strings.
So add of_machine_compatible_match() which takes a NULL terminated
array of compatible strings to check against the root node's
compatible property.
Compared to an open coded match this is slightly more self
documenting, and also avoids the caller needing to juggle the root
node either directly or via of_find_node_by_path().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-1-mpe@ellerman.id.au
32-bit powerpc kernels can be built for one of 5 sub-arches, see
Kconfig.cputype:
PPC_BOOK3S_32: "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
PPC_85xx: "Freescale 85xx"
PPC_8xx: "Freescale 8xx"
40x: "AMCC 40x"
44x: "AMCC 44x, 46x or 47x"
By default none of these are built for a plain allmodconfig build,
because it selects PPC64 which builds a 64-bit kernel.
There is already a ppc32_allmodconfig, which enables PPC_BOOK3S_32.
Add similar targets for the other 32-bit sub-arches to increase build
coverage:
ppc40x_allmodconfig
ppc44x_allmodconfig
ppc8xx_allmodconfig
ppc85xx_allmodconfig
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229114108.743810-1-mpe@ellerman.id.au
simple_realloc() frees the original buffer (ptr) even if the
reallocation failed.
Fix it to behave like standard realloc() and only free the original
buffer if the reallocation succeeded.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229115149.749264-1-mpe@ellerman.id.au
simple_malloc() will return NULL when there is not enough memory left.
Check pointer 'new' before using it to copy the old data.
Signed-off-by: Li zeming <zeming@nfschina.com>
[mpe: Reword subject, use change log from Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221219021816.3012-1-zeming@nfschina.com
`buf` is allocated in papr_get_attr(), and krealloc() of `buf`
could fail. We need to free the original `buf` in the case of failure.
Fixes: 3c14b73454 ("powerpc/pseries: Interface to represent PAPR firmware attributes")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221208133449.16284-1-linqiheng@huawei.com
objtool throws the following warning:
arch/powerpc/kexec/relocate_32.o: warning: objtool: .text+0x2bc: unannotated intra-function call
Fix this warning by annotating intra-function call, using
ANNOTATE_INTRA_FUNCTION_CALL macro, to indicate that the branch target
is valid.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221215115258.80810-1-sv@linux.ibm.com
Some devices are not capable of addressing 64 bits
via DMA, which includes MSI-X vectors. This allows
us to ensure these devices use MSI-X vectors in
32 bit space.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240117214632.134539-1-brking@linux.vnet.ibm.com
__kernel_map_pages() is almost identical for PPC32 and RADIX.
Refactor it.
On PPC32 it is not needed for KFENCE, but to keep it simple
just make it similar to PPC64.
Move the prototype of hash__kernel_map_pages() into mmu_decl.h to allow
IS_ENABLED() to work on 32-bit.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3656d47c53bff577739dac536dbae31fff52f6d8.1708078640.git.christophe.leroy@csgroup.eu
Previously driver got a few updates in order to replace OF APIs by
respective firmware node, however it was not finished to the logical
end, e.g., some APIs that has been used are still require OF node
to be passed. Finish that job by converting leftovers to use firmware
node APIs.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240302173401.217830-1-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
