PLL rate on RK356x is calculated through the simple formula:
((24000000 / _refdiv) * _fbdiv) / (_postdiv1 * _postdiv2)
The PLL rate setting for 78.75MHz seems to be copied from 96MHz
so this patch fixes it and configures it properly.
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Fixes: 842f4cb726 ("clk: rockchip: Add more PLL rates for rk3568")
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230614134750.1056293-1-a1ba.omarov@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds PLL setting for not so common resolution as 1920x720-50.00,
which can be set using 2500 horizontal signals and 808 vertical.
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230614134716.1055862-1-a1ba.omarov@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add dtsi entry for RK3399 PCIe endpoint core in the device tree.
The status is "disabled" by default, so it will not be loaded unless
explicitly chosen to. The RK3399 PCIe endpoit core should be enabled
with the RK3399 PCIe root complex disabled because the RK3399 PCIe
controller can only work one mode at the time, either in "root complex"
mode or in "endpoint" mode.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Link: https://lore.kernel.org/r/20230418074700.1083505-6-rick.wertenbroek@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Based on DT binding dwc_usb3 is single entry without anything else. That's
why combination dwc3_usb3, otg is not allowed. That's why split it to host
and peripheral pair which both points to the same IRQ.
DWC3 code is reading these two properties first before generic dwc_usb3.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6544d13afd9f3d8f5413e32684aa16e4d155e331.1687160244.git.michal.simek@amd.com
PMUFW (Power Management Unit firmware) requires top 1MB of the lower DDR
memory reserved for its operation, this is missing in k26 SM static dts
file. Bootloader or kernel shouldn't access this location.
Signed-off-by: Sharath Kumar Dasari <sharath.kumar.dasari@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/8ddc7fb4bf40faead7a015ad7e095f3f7d2ec191.1686555698.git.michal.simek@amd.com
With the introduction of commit 9365bf006f ("PCI: tegra194: Add
interconnect support in Tegra234"), the PCI driver on Tegra194 and later
requires an interconnect provider. However, a provider is currently only
exposed on Tegra234 and this causes PCI on Tegra194 to defer probe
indefinitely.
Fix this by adding a dummy implementation on Tegra194. This allows nodes
to be provided to interconnect consumers, but doesn't do any bandwidth
accounting or frequency scaling.
Fixes: 9365bf006f ("PCI: tegra194: Add interconnect support in Tegra234")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Tested-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/r/20230629160132.768940-1-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
After the elimination of inner modes, a couple of warnings that
were previously unreachable can now be triggered by malformed
inbound packets.
Fix this by:
1. Moving the setting of skb->protocol into the decap functions.
2. Returning -EINVAL when unexpected protocol is seen.
Reported-by: Maciej Żenczykowski<maze@google.com>
Fixes: 5f24f41e8e ("xfrm: Remove inner/outer modes from input path")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Each pin drives a separate interrupt in the parent IRQ domain, so there
is no need to set IRQCHIP_MASK_ON_SUSPEND.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace open coded variant of gpiochip_irqchip_add_allocated_domain()
in gpiochip_add_irqchip().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiochip_irqchip_add_allocated_domain() can be used
in another place in the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Check domain for being an error pointer before assigning it to
the GPIO IRQ chip domain.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As a preparatory patch and for the sake of consistency,
factor out gpiochip_simple_create_domain().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As a preparatory patch and for the sake of consistency, make
gpiochip_hierarchy_add_domain() return IRQ domain. While at it,
rename it to gpiochip_hierarchy_create_domain() to show
the change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Ideally we should not touch data in the given GPIO chip structure.
Let's become closer to it by avoiding altering fwnode member.
The GPIO library must use fwnode from GPIO device and the drivers
might use one from GPIO chip in case they initialized it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO library should rely only on the GPIO device's fwnode.
Hence, replace GPIO chip fwnode usage by respective handle
of the GPIO device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO library should rely only on the GPIO device's fwnode.
Hence, replace GPIO chip fwnode usage by respective OF node
of the GPIO device.
JFYI, this is partial revert of 8afe825502 ("gpiolib: of:
Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnode").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch
buffer") mistakenly passed in uapi I915_CACHING_CACHED as argument to
i915_gem_object_set_cache_coherency(), which actually takes internal
enum i915_cache_level.
No functional issue since the value matches I915_CACHE_LLC (1 == 1), which
is the intended caching mode, but lets clean it up nevertheless.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch buffer")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707125503.3965817-1-tvrtko.ursulin@linux.intel.com
Commit 9275277d53 ("drm/i915: use pat_index instead of cache_level")
added a dedicated gen12_pte_encode but forgot to remove the Gen12 specific
bit from gen8_pte_encode.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 9275277d53 ("drm/i915: use pat_index instead of cache_level")
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707124644.3965281-1-tvrtko.ursulin@linux.intel.com
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/208a15ce4e01973daf039ad7bc0f9241f650b3af.1672415956.git.christophe.jaillet@wanadoo.fr
The command word is defined as following:
/* Command */
#define SPI_CMD_COMMAND_SHIFT 0
#define SPI_CMD_DEVICE_ID_SHIFT 4
#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
#define SPI_CMD_ONE_BYTE_SHIFT 11
#define SPI_CMD_ONE_WIRE_SHIFT 12
If the prepend byte count field starts at bit 8, and the next defined
bit is SPI_CMD_ONE_BYTE at bit 11, it can be at most 3 bits wide, and
thus the max value is 7, not 15.
Fixes: b17de07606 ("spi/bcm63xx: work around inability to keep CS up")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20230629071453.62024-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tudor is not with Microchip anymore. I have worked lately
with Microchip SPI drivers replacing Tudor with myself as this
maintainer.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230630161700.448747-1-Ryan.Wanner@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix kernel-doc warnings:
security/apparmor/policy.c:294: warning: Function parameter or
member 'proxy' not described in 'aa_alloc_profile'
security/apparmor/policy.c:785: warning: Function parameter or
member 'label' not described in 'aa_policy_view_capable'
security/apparmor/policy.c:785: warning: Function parameter or
member 'ns' not described in 'aa_policy_view_capable'
security/apparmor/policy.c:847: warning: Function parameter or
member 'ns' not described in 'aa_may_manage_policy'
security/apparmor/policy.c:964: warning: Function parameter or
member 'hname' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'info' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'noreplace' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'ns' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'p' not described in '__lookup_replace'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix kernel-doc warnings:
security/apparmor/policy_compat.c:151: warning: Function parameter
or member 'size' not described in 'compute_fperms'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix kernel-doc warnings:
security/apparmor/policy_unpack.c:1173: warning: Function parameter
or member 'table_size' not described in 'verify_dfa_accept_index'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix kernel-doc warnings:
security/apparmor/resource.c:111: warning: Function parameter or
member 'label' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'new_rlim' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'resource' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'task' not described in 'aa_task_setrlimit'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix kernel-doc warnings:
security/apparmor/match.c:148: warning: Function parameter or member
'tables' not described in 'verify_table_headers'
security/apparmor/match.c:289: warning: Excess function parameter
'kr' description in 'aa_dfa_free_kref'
security/apparmor/match.c:289: warning: Function parameter or member
'kref' not described in 'aa_dfa_free_kref'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix kernel-doc warnings:
security/apparmor/lib.c:33: warning: Excess function parameter
'str' description in 'aa_free_str_table'
security/apparmor/lib.c:33: warning: Function parameter or member
't' not described in 'aa_free_str_table'
security/apparmor/lib.c:94: warning: Function parameter or
member 'n' not described in 'skipn_spaces'
security/apparmor/lib.c:390: warning: Excess function parameter
'deny' description in 'aa_check_perms'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix the following warnings issued by the kernel-doc script:
drivers/fpga/fpga-bridge.c:99: warning: No description found for return value of 'of_fpga_bridge_get'
drivers/fpga/fpga-bridge.c:163: warning: No description found for return value of 'fpga_bridges_enable'
drivers/fpga/fpga-bridge.c:187: warning: No description found for return value of 'fpga_bridges_disable'
drivers/fpga/fpga-bridge.c:238: warning: No description found for return value of 'of_fpga_bridge_get_to_list'
drivers/fpga/fpga-bridge.c:268: warning: No description found for return value of 'fpga_bridge_get_to_list'
- Extend the return description of of_fpga_bridge_get() to include the
case when try_module_get() fails.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230706142755.124879-3-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
- Fix the following warnings issued by the kernel-doc script:
drivers/fpga/fpga-region.c:46: warning: No description found for return value of 'fpga_region_get'
drivers/fpga/fpga-region.c:97: warning: No description found for return value of 'fpga_region_program_fpga'
drivers/fpga/fpga-region.c:295: warning: No description found for return value of 'fpga_region_init'
- Remove the "and registers a reconfig notifier" part from the description
of fpga_region_init() since it does not register an of_overlay notifier
anymore.
- Remove the outdated "if @np is not an FPGA Region" case from the return
description of fpga_region_get() and replace it with the case when
try_module_get() fails.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230706142755.124879-2-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Fix kernel-doc warnings:
security/apparmor/label.c:166: warning: Excess function parameter
'n' description in 'vec_cmp'
security/apparmor/label.c:166: warning: Excess function parameter
'vec' description in 'vec_cmp'
security/apparmor/label.c:166: warning: Function parameter or member
'an' not described in 'vec_cmp'
security/apparmor/label.c:166: warning: Function parameter or member
'bn' not described in 'vec_cmp'
security/apparmor/label.c:166: warning: Function parameter or member
'b' not described in 'vec_cmp'
security/apparmor/label.c:2051: warning: Function parameter or member
'label' not described in '__label_update'
security/apparmor/label.c:266: warning: Function parameter or member
'flags' not described in 'aa_vec_unique'
security/apparmor/label.c:594: warning: Excess function parameter
'l' description in '__label_remove'
security/apparmor/label.c:594: warning: Function parameter or member
'label' not described in '__label_remove'
security/apparmor/label.c:929: warning: Function parameter or member
'label' not described in 'aa_label_insert'
security/apparmor/label.c:929: warning: Function parameter or member
'ls' not described in 'aa_label_insert'
security/apparmor/label.c:1221: warning: Excess function parameter
'ls' description in 'aa_label_merge'
security/apparmor/label.c:1302: warning: Excess function parameter
'start' description in 'label_compound_match'
security/apparmor/label.c:1302: warning: Function parameter or member
'rules' not described in 'label_compound_match'
security/apparmor/label.c:1302: warning: Function parameter or member
'state' not described in 'label_compound_match'
security/apparmor/label.c:2051: warning: Function parameter or member
'label' not described in '__label_update'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20230705190309.579783-13-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-12-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A rename potentially involves updating 4 different inode timestamps.
Convert to the new simple_rename_timestamp helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-11-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A rename potentially involves updating 4 different inode timestamps.
Convert to the new simple_rename_timestamp helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-10-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A rename potentially involves updating 4 different inode timestamps.
Convert to the new simple_rename_timestamp helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-9-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A rename potentially involves updating 4 different inode timestamps.
Convert to the new simple_rename_timestamp helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Message-Id: <20230705190309.579783-8-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A rename potentially involves updating 4 different inode timestamps.
Convert to the new simple_rename_timestamp helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-7-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A rename potentially involves updating 4 different inode timestamps. Add
a function that handles the details sanely, and convert the libfs.c
callers to use it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705185812.579118-3-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
struct timespec64 has unused bits in the tv_nsec field that can be used
for other purposes. In future patches, we're going to change how the
inode->i_ctime is accessed in certain inodes in order to make use of
them. In order to do that safely though, we'll need to eradicate raw
accesses of the inode->i_ctime field from the kernel.
Add new accessor functions for the ctime that we use to replace them.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Message-Id: <20230705185812.579118-2-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix kernel-doc warnings:
security/apparmor/file.c:177: warning: Excess function parameter
'dfa' description in 'aa_lookup_fperms'
security/apparmor/file.c:177: warning: Function parameter or member
'file_rules' not described in 'aa_lookup_fperms'
security/apparmor/file.c:202: warning: Excess function parameter
'dfa' description in 'aa_str_perms'
security/apparmor/file.c:202: warning: Excess function parameter
'state' description in 'aa_str_perms'
security/apparmor/file.c:202: warning: Function parameter or member
'file_rules' not described in 'aa_str_perms'
security/apparmor/file.c:202: warning: Function parameter or member
'start' not described in 'aa_str_perms'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>