Sometimes it is useful to see the traffic happening inside the control
channel, especially when debugging a possible problem. This adds
tracepoints close to the hardware which can be enabled dynamically as
needed using the standard Linux trace events facility.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
If a DiplayPort cable is directly connected to the host routers USB4
port, there is no tunnel involved but the port is in "redrive" mode
meaning that it is re-driving the DisplayPort signals from its
DisplayPort source. In this case we need to keep the domain powered on
otherwise once the domain enters D3cold the connected monitor blanks
too.
Since this happens only on Intel Barlow Ridge add a quirk that takes
runtime PM reference if we detect that the USB4 port entered redrive
mode (and release it once it exits the mode).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have moved back to direct reads the additional timing
is not required hence this can be removed.
--v2
-Add Fixes tag [Ankit]
Fixes: 3974f9c17b ("drm/i915/hdcp: Adjust timeout for read in DPMST Scenario")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-10-suraj.kandpal@intel.com
Currently we are only checking capability of remote device and not
immediate downstream device but during capability check we need are
concerned with only the HDCP capability of downstream device.
During i915_display_info reporting we need HDCP Capability for both
the monitors and downstream branch device if any this patch adds that.
--v2
-Use MST Hub HDCP version [Ankit]
--v3
-Redefined how we seprate remote and direct read to make sure HDMI
shim functions are not touched [Ankit]
--v4
- Fix the conditions so that hdcp_info with remote_req true is sent
only when encoder is mst [Ankit]
--v5
-No need to have the MST Hub version in i915_hdcp_sink_capability[Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-9-suraj.kandpal@intel.com
Create a remote HDCP capability shim function which can read the
remote monitor HDCP capability when in MST configuration.
--v2
-Add an assertion to make sure only mst encoder call this remote_cap
function [Ankit]
--v3
-rename remote_hdcp_cap to remote_hdcp_capability [Jani]
--v4
-fix hdcp2_prerequisite check condition
-Move intel_dp_hdcp_get_remote_capability to dp_mst shim instead of
having it in dp shim [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226051017.1652970-2-suraj.kandpal@intel.com
Rename hdcp_capable and hdcp_2_2_capable to hdcp_get_capability
and hdcp_2_2_get_capability to properly reflect what these functions
are doing.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-7-suraj.kandpal@intel.com
Pass drm_dp_aux to intel_dp_hdcp_read_bcaps function
so as to aid in reading the bcaps for the remote monitor
later on.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-6-suraj.kandpal@intel.com
Move checks on the source side for HDCP2.2 into its own function
so that they can be used in the HDCP remote capability check
function.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-4-suraj.kandpal@intel.com
Even for MST scenarios we need to do direct reads only on the
immediate downstream device the rest of the authentication is taken
care by that device. Remote reads will only be used to check
capability of the monitors in MST topology.
--v2
-Add fixes tag [Ankit]
-Derive aux where needed rather than through a function [Ankit]
Fixes: ae4f902bb3 ("drm/i915/hdcp: Send the correct aux for DPMST HDCP scenario")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-3-suraj.kandpal@intel.com
Borrow the cpu_relax() definitions from kernel's
arch/riscv/include/asm/vdso/processor.h to tools/ for riscv.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Borrow the csr definitions and operations from kernel's
arch/riscv/include/asm/csr.h to tools/ for riscv.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Since only 64bit KVM selftests were supported on all architectures,
add the CONFIG_64BIT definition in kvm/Makefile to ensure only 64bit
definitions were available in the corresponding included files.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Split the arch-neutral test code out of aarch64/arch_timer.c
and put them into a common arch_timer.c. This is a preparation
to share timer test codes in riscv.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
There are intermittent failures occurred when stressing the
arch-timer test in a Qemu VM:
Guest assert failed, vcpu 0; stage; 4; iter: 3
==== Test Assertion Failure ====
aarch64/arch_timer.c:196: config_iter + 1 == irq_iter
pid=4048 tid=4049 errno=4 - Interrupted system call
1 0x000000000040253b: test_vcpu_run at arch_timer.c:248
2 0x0000ffffb60dd5c7: ?? ??:0
3 0x0000ffffb6145d1b: ?? ??:0
0x3 != 0x2 (config_iter + 1 != irq_iter)e
Further test and debug show that the timeout for an interrupt
to arrive do have random high fluctuation, espectially when
testing in an virtual environment.
To alleviate this issue, just expose the timeout value as user
configurable and print some hint message to increase the value
when hitting the failure..
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Change signed type to unsigned in test_args struct which
only make sense for unsigned value.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
The introduction of $(SPLIT_TESTS) also introduced a warning when
building selftests on architectures that include get-reg-lists:
make: Entering directory '/root/kvm/tools/testing/selftests/kvm'
Makefile:272: warning: overriding recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
Makefile:267: warning: ignoring old recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
make: Leaving directory '/root/kvm/tools/testing/selftests/kvm'
In addition, the rule for $(SPLIT_TESTS_TARGETS) includes _all_
the $(SPLIT_TESTS_OBJS), which only works because there is just one.
So fix both by adjusting the rules:
- remove $(SPLIT_TESTS_TARGETS) from the $(TEST_GEN_PROGS) rules,
and rename it to $(SPLIT_TEST_GEN_PROGS)
- fix $(SPLIT_TESTS_OBJS) so that it plays well with $(OUTPUT),
rename it to $(SPLIT_TEST_GEN_OBJ), and list the object file
explicitly in the $(SPLIT_TEST_GEN_PROGS) link rule
Fixes: 17da79e009 ("KVM: arm64: selftests: Split get-reg-list test code", 2023-08-09)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
If the connected panel supports both DRRS & PSR, driver gives preference
to PSR ("DRRS enabled: no"). Even though the hardware supports DRRS,
IGT treats ("DRRS enabled: yes") as not capable.
Introduce a new entry "DRRS capable" to debugfs i915_drrs_status, so
that IGT will read the DRRS capability as "DRRS capable: yes".
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221111223.2313692-1-bhanuprakash.modem@intel.com
According to motorcomm,yt8xxx.yaml, the compatible string must be
only 'ethernet-phy-id4f51.e91b'.
Remove 'ethernet-phy-ieee802.3-c22' to fix the following dt-schema warning:
imx8mm-kontron-bl-osm-s.dtb: ethernet-phy@0: compatible: ['ethernet-phy-id4f51.e91b', 'ethernet-phy-ieee802.3-c22'] is too long
from schema $id: http://devicetree.org/schemas/net/motorcomm,yt8xxx.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'reset-names' property is not a valid one under ethernet-phy
and causes the following dt-schema warning:
/imx8qm-apalis-v1.1-eval-v1.2.dtb: ethernet-phy@7: 'resets' is a dependency of 'reset-names'
from schema $id: http://devicetree.org/schemas/reset/reset.yaml#
Remove this property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DT node names should be generic, so replace "weim" node name with
"memory-controller" in all i.MX SoC DT files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The canonical node name for touchscreens is "touchscreen",
so update the i.MX6UL "tsc" node accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
node, since the -gpio suffix is deprecated. All known implementations of
this binding can handle -gpio and -gpios since day 1, so this should be
fully backwards compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pinctrl node name must be either pinctrl or pinmux.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per davicom,dm9000.yaml, the Ethernet node name should be 'ethernet'.
Change it to fix the following schema warning:
imx1-apf9328.dtb: eth@4,c00000: $nodename:0: 'eth@4,c00000' does not match '^ethernet(@.*)?$'
from schema $id: http://devicetree.org/schemas/net/davicom,dm9000.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per at24.yaml, the node name should be 'eeprom'.
Change it accordingly to fix the following schema warning:
imx28-evk.dtb: at24@51: $nodename:0: 'at24@51' does not match '^eeprom@[0-9a-f]{1,2}$'
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable USB3 HW LPM feature.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some more mostly boring fixes, but some not
User reported ones:
- the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty performance
bug; user reported an unter initially taking 2 seconds and then ~2
minutes
- kill a __GFP_NOFAIL in the buffered read path; this was a leftover
from the trickier fix to kill __GFP_NOFAIL in readahead, where we
can't return errors (and have to silently truncate the read
ourselves).
bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
filesystems because our folio state is just barely too big, 2MB
hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.
additionally, the flags argument was just buggy, we weren't supplying
GFP_KERNEL previously (!).
-----BEGIN PGP SIGNATURE-----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=KNWR
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Some more mostly boring fixes, but some not
User reported ones:
- the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty
performance bug; user reported an untar initially taking two
seconds and then ~2 minutes
- kill a __GFP_NOFAIL in the buffered read path; this was a leftover
from the trickier fix to kill __GFP_NOFAIL in readahead, where we
can't return errors (and have to silently truncate the read
ourselves).
bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
filesystems because our folio state is just barely too big, 2MB
hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.
additionally, the flags argument was just buggy, we weren't
supplying GFP_KERNEL previously (!)"
* tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs:
bcachefs: fix bch2_save_backtrace()
bcachefs: Fix check_snapshot() memcpy
bcachefs: Fix bch2_journal_flush_device_pins()
bcachefs: fix iov_iter count underflow on sub-block dio read
bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree
bcachefs: Kill __GFP_NOFAIL in buffered read path
bcachefs: fix backpointer_to_text() when dev does not exist
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com> # Tegra
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com> # Samsung
Link: https://lore.kernel.org/r/20240220072213.35779-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current code will scan the entirety of each per-CPU list of exiting
tasks in ->rtp_exit_list with interrupts disabled. This is normally just
fine, because each CPU typically won't have very many tasks in this state.
However, if a large number of tasks block late in do_exit(), these lists
could be arbitrarily long. Low probability, perhaps, but it really
could happen.
This commit therefore occasionally re-enables interrupts while traversing
these lists, inserting a dummy element to hold the current place in the
list. In kernels built with CONFIG_PREEMPT_RT=y, this re-enabling happens
after each list element is processed, otherwise every one-to-two jiffies.
[ paulmck: Apply Frederic Weisbecker feedback. ]
Link: https://lore.kernel.org/all/ZdeI_-RfdLR8jlsm@localhost.localdomain/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Holding a mutex across synchronize_rcu_tasks() and acquiring
that same mutex in code called from do_exit() after its call to
exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop()
results in deadlock. This is by design, because tasks that are far
enough into do_exit() are no longer present on the tasks list, making
it a bit difficult for RCU Tasks to find them, let alone wait on them
to do a voluntary context switch. However, such deadlocks are becoming
more frequent. In addition, lockdep currently does not detect such
deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time
(for example, if it blocks acquiring a mutex), then this task is in an
RCU Tasks quiescent state. And with some adjustments, RCU Tasks could
just as well take advantage of that fact.
This commit therefore eliminates these deadlock by replacing the
SRCU-based wait for do_exit() completion with per-CPU lists of tasks
currently exiting. A given task will be on one of these per-CPU lists for
the same period of time that this task would previously have been in the
previous SRCU read-side critical section. These lists enable RCU Tasks
to find the tasks that have already been removed from the tasks list,
but that must nevertheless be waited upon.
The RCU Tasks grace period gathers any of these do_exit() tasks that it
must wait on, and adds them to the list of holdouts. Per-CPU locking
and get_task_struct() are used to synchronize addition to and removal
from these lists.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit continues the elimination of deadlocks involving do_exit()
and RCU tasks by causing exit_tasks_rcu_start() to add the current
task to a per-CPU list and causing exit_tasks_rcu_stop() to remove the
current task from whatever list it is on. These lists will be used to
track tasks that are exiting, while still accounting for any RCU-tasks
quiescent states that these tasks pass though.
[ paulmck: Apply Frederic Weisbecker feedback. ]
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Holding a mutex across synchronize_rcu_tasks() and acquiring
that same mutex in code called from do_exit() after its call to
exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop()
results in deadlock. This is by design, because tasks that are far
enough into do_exit() are no longer present on the tasks list, making
it a bit difficult for RCU Tasks to find them, let alone wait on them
to do a voluntary context switch. However, such deadlocks are becoming
more frequent. In addition, lockdep currently does not detect such
deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time
(for example, if it blocks acquiring a mutex), then this task is in an
RCU Tasks quiescent state. And with some adjustments, RCU Tasks could
just as well take advantage of that fact.
This commit therefore initializes the data structures that will be needed
to rely on these quiescent states and to eliminate these deadlocks.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In order for RCU Tasks to reliably maintain per-CPU lists of exiting
tasks, those lists must be initialized before it is possible for tasks
to exit, especially given that the boot CPU is not necessarily CPU 0
(an example being, powerpc kexec() kernels). And at the time that
rcu_init_tasks_generic() is called, a task could potentially exit,
unconventional though that sort of thing might be.
This commit therefore moves the calls to cblist_init_generic() from
functions called from rcu_init_tasks_generic() to a new function named
tasks_cblist_init_generic() that is invoked from rcu_init().
This constituted a bug in a commit that never went to mainline, so
there is no need for any backporting to -stable.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Holding a mutex across synchronize_rcu_tasks() and acquiring
that same mutex in code called from do_exit() after its call to
exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop()
results in deadlock. This is by design, because tasks that are far
enough into do_exit() are no longer present on the tasks list, making
it a bit difficult for RCU Tasks to find them, let alone wait on them
to do a voluntary context switch. However, such deadlocks are becoming
more frequent. In addition, lockdep currently does not detect such
deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time
(for example, if it blocks acquiring a mutex), then this task is in an
RCU Tasks quiescent state. And with some adjustments, RCU Tasks could
just as well take advantage of that fact.
This commit therefore adds the data structures that will be needed
to rely on these quiescent states and to eliminate these deadlocks.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In an ideal world we would like UBI to be used where ever possible on a
NAND chip. And with UBI support in ARM Trusted Firmware and U-Boot it
is possible to achieve an (almost-)all-UBI flash layout. Hence the need
for a way to also use UBI volumes to store board-level constants, such
as MAC addresses and calibration data of wireless interfaces.
Add UBI volume NVMEM driver module exposing UBI volumes as NVMEM
providers. Allow UBI devices to have a "volumes" firmware subnode with
volumes which may be compatible with "nvmem-cells".
Access to UBI volumes via the NVMEM interface at this point is
read-only, and it is slow, opening and closing the UBI volume for each
access due to limitations of the NVMEM provider API.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Look for the 'volumes' subnode of an MTD partition attached to a UBI
device and attach matching child nodes to UBI volumes.
This allows UBI volumes to be referenced in device tree, e.g. for use
as NVMEM providers.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Introduce a new notification type UBI_VOLUME_SHUTDOWN to inform users
that a volume is just about to be removed.
This is needed because users (such as the NVMEM subsystem) expect that
at the time their removal function is called, the parenting device is
still available (for removal of sysfs nodes, for example, in case of
NVMEM which otherwise WARNs on volume removal).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Introduce device tree compatible 'linux,ubi' and attach compatible MTD
devices using the MTD add notifier. This is needed for a UBI device to
be available early at boot (and not only after late_initcall), so
volumes on them can be used eg. as NVMEM providers for other drivers.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Use UBI_VOLUME_ADDED notification to create ubiblock device specified
on kernel cmdline or module parameter.
This makes thing more simple and has the advantage that ubiblock devices
on volumes which are not present at the time the ubi module is probed
will still be created.
Suggested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
UBI volumes may be used to contain NVMEM bits, typically device MAC
addresses or wireless radio calibration data.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add basic bindings for UBI devices and volumes.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Recently we catched ENOSPC returned by make_reservation() while doing
fsstress on UBIFS, we got following information when it occurred (See
details in Link):
UBIFS error (ubi0:0 pid 3640152): make_reservation [ubifs]: cannot
reserve 112 bytes in jhead 2, error -28
CPU: 2 PID: 3640152 Comm: kworker/u16:2 Tainted: G B W
Hardware name: Hisilicon PhosphorHi1230 EMU (DT)
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call trace:
dump_stack+0x114/0x198
make_reservation+0x564/0x610 [ubifs]
ubifs_jnl_write_data+0x328/0x48c [ubifs]
do_writepage+0x2a8/0x3e4 [ubifs]
ubifs_writepage+0x16c/0x374 [ubifs]
generic_writepages+0xb4/0x114
do_writepages+0xcc/0x11c
writeback_sb_inodes+0x2d0/0x564
wb_writeback+0x20c/0x2b4
wb_workfn+0x404/0x510
process_one_work+0x304/0x4ac
worker_thread+0x31c/0x4e4
kthread+0x23c/0x290
Budgeting info: data budget sum 17576, total budget sum 17768
budg_data_growth 4144, budg_dd_growth 13432, budg_idx_growth 192
min_idx_lebs 13, old_idx_sz 988640, uncommitted_idx 0
page_budget 4144, inode_budget 160, dent_budget 312
nospace 0, nospace_rp 0
dark_wm 8192, dead_wm 4096, max_idx_node_sz 192
freeable_cnt 0, calc_idx_sz 988640, idx_gc_cnt 0
dirty_pg_cnt 4, dirty_zn_cnt 0, clean_zn_cnt 4811
gc_lnum 21, ihead_lnum 14
jhead 0 (GC) LEB 16
jhead 1 (base) LEB 34
jhead 2 (data) LEB 23
bud LEB 16
bud LEB 23
bud LEB 34
old bud LEB 33
old bud LEB 31
old bud LEB 15
commit state 4
Budgeting predictions:
available: 33832, outstanding 17576, free 15356
(pid 3640152) start dumping LEB properties
(pid 3640152) Lprops statistics: empty_lebs 3, idx_lebs 11
taken_empty_lebs 1, total_free 1253376, total_dirty 2445736
total_used 3438712, total_dark 65536, total_dead 17248
LEB 15 free 0 dirty 248000 used 5952 (taken)
LEB 16 free 110592 dirty 896 used 142464 (taken, jhead 0 (GC))
LEB 21 free 253952 dirty 0 used 0 (taken, GC LEB)
LEB 23 free 0 dirty 248104 used 5848 (taken, jhead 2 (data))
LEB 29 free 253952 dirty 0 used 0 (empty)
LEB 33 free 0 dirty 253952 used 0 (taken)
LEB 34 free 217088 dirty 36544 used 320 (taken, jhead 1 (base))
LEB 37 free 253952 dirty 0 used 0 (empty)
OTHERS: index lebs, zero-available non-index lebs
According to the budget algorithm, there are 5 LEBs reserved for budget:
three journal heads(16,23,34), 1 GC LEB(21) and 1 deletion LEB(can be
used in make_reservation()). There are 2 empty LEBs used for index nodes,
which is calculated as min_idx_lebs - idx_lebs = 2. In theory, LEB 15
and 33 should be reclaimed as free state after committing, but it is now
in taken state. After looking the realization of reserve_space(), there's
a possible situation:
LEB 15: free 2000 dirty 248000 used 3952 (jhead 2)
LEB 23: free 2000 dirty 248104 used 3848 (bud, taken)
LEB 33: free 2000 dirty 251952 used 0 (bud, taken)
wb_workfn wb_workfn_2
do_writepage // write 3000 bytes
ubifs_jnl_write_data
make_reservation
reserve_space
ubifs_garbage_collect
ubifs_find_dirty_leb // ret ENOSPC, dirty LEBs are taken
nospc_retries++ // 1
ubifs_run_commit
do_commit
LEB 15: free 2000 dirty 248000 used 3952 (jhead 2)
LEB 23: free 2000 dirty 248104 used 3848 (dirty)
LEB 33: free 2000 dirty 251952 used 0 (dirty)
do_writepage // write 2000 bytes for 3 times
ubifs_jnl_write_data
// grabs 15\23\33
LEB 15: free 0 dirty 248000 used 5952 (bud, taken)
LEB 23: free 0 dirty 248104 used 5848 (jhead 2)
LEB 33: free 0 dirty 253952 used 0 (bud, taken)
reserve_space
ubifs_garbage_collect
ubifs_find_dirty_leb // ret ENOSPC, dirty LEBs are taken
if (nospc_retries++ < 2) // false
ubifs_ro_mode !
Fetch a reproducer in Link.
The dirty LEBs could be grabbed by other threads, which fails finding dirty
LEBs of GC in current thread, so make_reservation() could try many times to
invoke GC&&committing, but current realization limits the times of retrying
as 'nospc_retries'(twice).
Fix it by adding a wait queue, start queuing up space reservation tasks
when someone task has retried gc + commit for many times. Then there is
only one task making space reservation at any time, and it can always make
success under the premise of correct budgeting.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218164
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
For error handling path in ubifs_symlink(), inode will be marked as
bad first, then iput() is invoked. If inode->i_link is initialized by
fscrypt_encrypt_symlink() in encryption scenario, inode->i_link won't
be freed by callchain ubifs_free_inode -> fscrypt_free_inode in error
handling path, because make_bad_inode() has changed 'inode->i_mode' as
'S_IFREG'.
Following kmemleak is easy to be reproduced by injecting error in
ubifs_jnl_update() when doing symlink in encryption scenario:
unreferenced object 0xffff888103da3d98 (size 8):
comm "ln", pid 1692, jiffies 4294914701 (age 12.045s)
backtrace:
kmemdup+0x32/0x70
__fscrypt_encrypt_symlink+0xed/0x1c0
ubifs_symlink+0x210/0x300 [ubifs]
vfs_symlink+0x216/0x360
do_symlinkat+0x11a/0x190
do_syscall_64+0x3b/0xe0
There are two ways fixing it:
1. Remove make_bad_inode() in error handling path. We can do that
because ubifs_evict_inode() will do same processes for good
symlink inode and bad symlink inode, for inode->i_nlink checking
is before is_bad_inode().
2. Free inode->i_link before marking inode bad.
Method 2 is picked, it has less influence, personally, I think.
Cc: stable@vger.kernel.org
Fixes: 2c58d548f5 ("fscrypt: cache decrypted symlink target in ->i_link")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
