Enable MHP_MEMMAP_ON_MEMORY to support "memmap on memory".
memory_hotplug.memmap_on_memory=true kernel parameter should be set in
kernel boot option to enable the feature.
Link: https://lkml.kernel.org/r/20240108132747.3238763-6-sumanthk@linux.ibm.com
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MEM_PREPARE_ONLINE memory notifier makes memory block physical
accessible via sclp assign command. The notifier ensures self-contained
memory maps are accessible and hence enabling the "memmap on memory" on
s390.
MEM_FINISH_OFFLINE memory notifier shifts the memory block to an
inaccessible state via sclp unassign command.
Implementation considerations:
* When MHP_MEMMAP_ON_MEMORY is disabled, the system retains the old
behavior. This means the memory map is allocated from default memory.
* If MACHINE_HAS_EDAT1 is unavailable, MHP_MEMMAP_ON_MEMORY is
automatically disabled. This ensures that vmemmap pagetables do not
consume additional memory from the default memory allocator.
* The MEM_GOING_ONLINE notifier has been modified to perform no
operation, as MEM_PREPARE_ONLINE already executes the sclp assign
command.
* The MEM_CANCEL_ONLINE/MEM_OFFLINE notifier now performs no operation, as
MEM_FINISH_OFFLINE already executes the sclp unassign command.
Link: https://lkml.kernel.org/r/20240108132747.3238763-5-sumanthk@linux.ibm.com
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allocate memory map (struct pages array) from the hotplugged memory
range, rather than using system memory. The change addresses the issue
where standby memory, when configured to be much larger than online
memory, could potentially lead to ipl failure due to memory map
allocation from online memory. For example, 16MB of memory map
allocation is needed for a memory block size of 1GB and when standby
memory is configured much larger than online memory, this could lead to
ipl failure.
To address this issue, the solution involves introducing "memmap on
memory" using the vmem_altmap structure on s390. Architectures that
want to implement it should pass the altmap to the vmemmap_populate()
function and its associated callchain. This enhancement is discussed in
commit 4b94ffdc41 ("x86, mm: introduce vmem_altmap to augment
vmemmap_populate()")
Provide "memmap on memory" support for s390 by passing the altmap in
vmemmap_populate() and its callchain. The allocation path is described
as follows:
* When altmap is NULL in vmemmap_populate(), memory map allocation
occurs using the existing vmemmap_alloc_block_buf().
* When altmap is not NULL in vmemmap_populate(), memory map allocation
still uses vmemmap_alloc_block_buf(), but this function internally
calls altmap_alloc_block_buf().
For deallocation, the process is outlined as follows:
* When altmap is NULL in vmemmap_free(), memory map deallocation happens
through free_pages().
* When altmap is not NULL in vmemmap_free(), memory map deallocation
occurs via vmem_altmap_free().
While memory map allocation is primarily handled through the
self-contained memory map range, there might still be a small amount of
system memory allocation required for vmemmap pagetables. To mitigate
this impact, this feature will be limited to machines with EDAT1
support.
Link: https://lkml.kernel.org/r/20240108132747.3238763-3-sumanthk@linux.ibm.com
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "implement "memmap on memory" feature on s390".
This series provides "memmap on memory" support on s390 platform. "memmap
on memory" allows struct pages array to be allocated from the hotplugged
memory range instead of allocating it from main system memory.
s390 currently preallocates struct pages array for all potentially
possible memory, which ensures memory onlining always succeeds, but with
the cost of significant memory consumption from the available system
memory during boottime. In certain extreme configuration, this could lead
to ipl failure.
"memmap on memory" ensures struct pages array are populated from self
contained hotplugged memory range instead of depleting the available
system memory and this could eliminate ipl failure on s390 platform.
On other platforms, system might go OOM when the physically hotplugged
memory depletes the available memory before it is onlined. Hence, "memmap
on memory" feature was introduced as described in commit a08a2ae346
("mm,memory_hotplug: allocate memmap from the added memory range").
Unlike other architectures, s390 memory blocks are not physically
accessible until it is online. To make it physically accessible two new
memory notifiers MEM_PREPARE_ONLINE / MEM_FINISH_OFFLINE are added and
this notifier lets the hypervisor inform that the memory should be made
physically accessible. This allows for "memmap on memory" initialization
during memory hotplug onlining phase, which is performed before calling
MEM_GOING_ONLINE notifier.
Patch 1 introduces MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers
to prepare the transition of memory to and from a physically accessible
state. New mhp_flag MHP_OFFLINE_INACCESSIBLE is introduced to ensure
altmap cannot be written when adding memory - before it is set online.
This enhancement is crucial for implementing the "memmap on memory"
feature for s390 in a subsequent patch.
Patches 2 allocates vmemmap pages from self-contained memory range for
s390. It allocates memory map (struct pages array) from the hotplugged
memory range, rather than using system memory by passing altmap to vmemmap
functions.
Patch 3 removes unhandled memory notifier types on s390.
Patch 4 implements MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers
on s390. MEM_PREPARE_ONLINE memory notifier makes memory block physical
accessible via sclp assign command. The notifier ensures self-contained
memory maps are accessible and hence enabling the "memmap on memory" on
s390. MEM_FINISH_OFFLINE memory notifier shifts the memory block to an
inaccessible state via sclp unassign command.
Patch 5 finally enables MHP_MEMMAP_ON_MEMORY on s390.
This patch (of 5):
Introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers to
prepare the transition of memory to and from a physically accessible
state. This enhancement is crucial for implementing the "memmap on
memory" feature for s390 in a subsequent patch.
Platforms such as x86 can support physical memory hotplug via ACPI. When
there is physical memory hotplug, ACPI event leads to the memory addition
with the following callchain:
acpi_memory_device_add()
-> acpi_memory_enable_device()
-> __add_memory()
After this, the hotplugged memory is physically accessible, and altmap
support prepared, before the "memmap on memory" initialization in
memory_block_online() is called.
On s390, memory hotplug works in a different way. The available hotplug
memory has to be defined upfront in the hypervisor, but it is made
physically accessible only when the user sets it online via sysfs,
currently in the MEM_GOING_ONLINE notifier. This is too late and "memmap
on memory" initialization is performed before calling MEM_GOING_ONLINE
notifier.
During the memory hotplug addition phase, altmap support is prepared and
during the memory onlining phase s390 requires memory to be physically
accessible and then subsequently initiate the "memmap on memory"
initialization process.
The memory provider will handle new MEM_PREPARE_ONLINE /
MEM_FINISH_OFFLINE notifications and make the memory accessible.
The mhp_flag MHP_OFFLINE_INACCESSIBLE is introduced and is relevant when
used along with MHP_MEMMAP_ON_MEMORY, because the altmap cannot be written
(e.g., poisoned) when adding memory -- before it is set online. This
allows for adding memory with an altmap that is not currently made
available by a hypervisor. When onlining that memory, the hypervisor can
be instructed to make that memory accessible via the new notifiers and the
onlining phase will not require any memory allocations, which is helpful
in low-memory situations.
All architectures ignore unknown memory notifiers. Therefore, the
introduction of these new notifiers does not result in any functional
modifications across architectures.
Link: https://lkml.kernel.org/r/20240108132747.3238763-1-sumanthk@linux.ibm.com
Link: https://lkml.kernel.org/r/20240108132747.3238763-2-sumanthk@linux.ibm.com
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function description comment for mas_node_count_gfp() mistakingly
refers to the function as mas_node_count(). Change it to refer to the
correct function.
Link: https://lkml.kernel.org/r/20240109223119.162357-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current placement of trace_cma_alloc_start/finish misses the fail
cases: !cma || !cma->count || !cma->bitmap.
trace_cma_alloc_finish is also not emitted for the failure case
where bitmap_count > bitmap_maxno.
Fix these missed cases by moving the start event before the failure
checks and moving the finish event to the out label.
Link: https://lkml.kernel.org/r/20240110012234.3793639-1-kaleshsingh@google.com
Fixes: 7bc1aec5e2 ("mm: cma: add trace events for CMA alloc perf testing")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Liam Mark <lmark@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN reports unitialized variable when registering the hook,
reg->hook_ops_type == NF_HOOK_OP_BPF)
~~~~~~~~~~~ undefined
This is a small structure, just use kzalloc to make sure this
won't happen again when new fields get added to nf_hook_ops.
Fixes: 7b4b2fa375 ("netfilter: annotate nf_tables base hook ops")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Register hooks last when adding chain/flowtable to ensure that packets do
not walk over datastructure that is being released in the error path
without waiting for the rcu grace period.
Fixes: 91c7b38dc9 ("netfilter: nf_tables: use new transaction infrastructure to handle chain")
Fixes: 3b49e2e94e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
dst is transferred to the flow object, route object does not own it
anymore. Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow.
Fixes: a3c90f7a23 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We need to set the dormant flag again if we fail to register
the hooks.
During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.
On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core.
Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com
Fixes: 179d9ba555 ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Nathan Chancellor <nathan@kernel.org> says:
Eric reported that builds of LLVM with [1] (close to tip of tree) have
CONFIG_AS_HAS_OPTION_ARCH=n because the test for expected failure on
invalid input has started succeeding.
This Kconfig test was added because '.option arch' only causes an
assembler warning when it is unsupported, rather than a hard error,
which is what users of as-instr expect when something is unsupported.
This can be resolved by turning assembler warnings into errors with
'-Wa,--fatal-warnings' like we do with the compiler with '-Werror',
which is what the first patch does. The second patch removes the invalid
test, as the valid test is good enough with fatal warnings.
I have diffed several configurations for the different architectures
that use as-instr and I have found no issues.
[1]: 3ac9fe69f7
* b4-shazam-merge:
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-0-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move interrupt configuration from mv88q222x_revb0_config_init to
mv88q2xxx_config_init. Same register and bits are used for the 88q2xxx
devices.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-15-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove assignment of phydev->pma_extable in mv88q222x_revb0_config_init.
It is already done in mv88q2xxx_config_init, just call
mv88q2xxx_config_init.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-14-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mv88q2xxx_config_init calls genphy_c45_read_pma which is done by
mv88q2xxx_read_status, it calls also mv88q2xxx_config_aneg which is
also called by the PHY state machine. Let the PHY state machine handle
the phydriver ops in their intendend way.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-13-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to mv88q2xxx_config_aneg for Marvell 88Q2220 devices and remove
the mv88q222x_config_aneg function which is basically a copy of the
mv88q2xxx_config_aneg function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-12-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marvell 88Q2xxx devices follow the same scheme, after configuration they
need a soft reset. Soft resets differ between devices, so we use the
.soft_reset callback instead of creating .config_aneg callbacks for each
device.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-11-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add cable test support for Marvell 88Q222x devices. Reported distance
granularity is 1m.
1m cable, open:
Cable test started for device eth0.
Cable test completed for device eth0.
Pair A code Open Circuit
Pair A, fault length: 1.00m
1m cable, shorted:
Cable test started for device eth0.
Cable test completed for device eth0.
Pair A code Short within Pair
Pair A, fault length: 1.00m
6m cable, open:
Cable test started for device eth0.
Cable test completed for device eth0.
Pair A code Open Circuit
Pair A, fault length: 6.00m
6m cable, shorted:
Cable test started for device eth0.
Cable test completed for device eth0.
Pair A code Short within Pair
Pair A, fault length: 6.00m
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240218075753.18067-10-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marvell 88q2xxx devices have an inbuilt temperature sensor. Add hwmon
support for this sensor.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-9-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Added .config_intr and .handle_interrupt callbacks. Whenever the link
goes up or down an interrupt will be triggered. Interrupts are configured
separately for 100/1000BASET1.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-7-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a driver for the Marvell 88Q2220. This driver allows to detect the
link, switch between 100BASE-T1 and 1000BASE-T1 and switch between
master and slave mode. Autonegotiation is supported.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-6-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename mv88q2xxxx_get_sqi to mv88q2xxx_get_sqi and
mv88q2xxxx_get_sqi_max to mv88q2xxx_get_sqi_max.
Fix linebreaks and use everywhere hexadecimal numbers written with
lowercase letters instead of mixing it up.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-5-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set 100BT1 and 1000BT1 linkmode advertisement bits to adv_l_mask to
enable detection.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-4-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend helper functions mii_t1_adv_m_mod_linkmode_t and
linkmode_adv_to_mii_t1_adv_m_t to support 100BT1 and 1000BT1 linkmode
advertisements.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-3-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix misspellings of "Arm11", "Cortex-A8", and "Cortex-A9".
While at it, add a missing comma before "and", and reflow the paragraph.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The bridge does not have any cells on the node level, just on the
ports.
The VGA connector is actually named "J30" on the board so give it that
name in the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The bridge does not have any cells on the node level, just on the
ports.
The VGA connector is actually named "J1" on the board so give it that
name in the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When the development chip ROM was added, the "direct-mapped" compatible
value was already obsolete. In addition, the device node lacked the
accompanying "probe-type" property, causing the old physmap_of_core
driver to fall back to trying all available probe types.
Unfortunately this fallback was lost when the DT and pdata cases were
merged.
Fix this by using the modern "mtd-rom" compatible value instead.
Fixes: 5c3f5edbe0 ("ARM: realview: add flash devices to the PB1176 DTS")
Fixes: 642b1e8dbe ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Sabrina Dubroca says:
====================
tls: fixes for record type handling with PEEK
There are multiple bugs in tls_sw_recvmsg's handling of record types
when MSG_PEEK flag is used, which can lead to incorrectly merging two
records:
- consecutive non-DATA records shouldn't be merged, even if they're
the same type (partly handled by the test at the end of the main
loop)
- records of the same type (even DATA) shouldn't be merged if one
record of a different type comes in between
====================
Link: https://lore.kernel.org/r/cover.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we queue 3 records:
- record 1, type DATA
- record 2, some other type
- record 3, type DATA
and do a recv(PEEK), the rx_list will contain the first two records.
The next large recv will walk through the rx_list and copy data from
record 1, then stop because record 2 is a different type. Since we
haven't filled up our buffer, we will process the next available
record. It's also DATA, so we can merge it with the current read.
We shouldn't do that, since there was a record in between that we
ignored.
Add a flag to let process_rx_list inform tls_sw_recvmsg that it had
more data available.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PEEK needs to leave decrypted records on the rx_list so that we can
receive them later on, so it jumps back into the async code that
queues the skb. Unfortunately that makes us skip the
TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two
records of the same (non-DATA) type are queued, we end up merging
them.
Add the same record type check, and make it unlikely to not penalize
the async fastpath. Async decrypt only applies to data record, so this
check is only needed for PEEK.
process_rx_list also has similar issues.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of temperature configuration registers does
not always match the total number of temperature registers.
This can result in access errors reported if KASAN is enabled.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/linux-hwmon/d51181d1-d26b-42b2-b002-3f5a4037721f@roeck-us.net/
Fixes: b7f1f7b252 ("hwmon: (nct6775) Additional TEMP registers for nct6799")
Cc: Ahmad Khalifa <ahmad@khalifa.ws>
Tested-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Back in 2018 the commit be95a845cc ("bpf: avoid false sharing of map refcount
with max_entries") added ____cacheline_aligned to "struct bpf_map" to make sure
that fields like refcnt don't share a cache line with max_entries that is used
to bounds check map access. That was done to make spectre style attacks harder.
The main mitigation is done via code similar to array_index_nospec(), of course.
This was an additional precaution.
It increased the size of "struct bpf_map" a little, but it's affect on all
other maps (like array) is significant, since "struct bpf_map" is typically
the first member in other map types.
Undo this ____cacheline_aligned tag. Instead move freeze_mutex field around, so
that refcnt and max_entries are still in different cache lines.
The main effect is seen in sizeof(struct bpf_array) that reduces from 320
to 248 bytes.
BEFORE:
struct bpf_map {
const struct bpf_map_ops * ops; /* 0 8 */
...
char name[16]; /* 96 16 */
/* XXX 16 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
atomic64_t refcnt __attribute__((__aligned__(64))); /* 128 8 */
...
/* size: 256, cachelines: 4, members: 30 */
/* sum members: 232, holes: 1, sum holes: 16 */
/* padding: 8 */
/* paddings: 1, sum paddings: 2 */
} __attribute__((__aligned__(64)));
struct bpf_array {
struct bpf_map map; /* 0 256 */
...
/* size: 320, cachelines: 5, members: 5 */
/* padding: 48 */
/* paddings: 1, sum paddings: 8 */
} __attribute__((__aligned__(64)));
AFTER:
struct bpf_map {
/* size: 232, cachelines: 4, members: 30 */
/* paddings: 1, sum paddings: 2 */
/* last cacheline: 40 bytes */
};
struct bpf_array {
/* size: 248, cachelines: 4, members: 5 */
/* last cacheline: 56 bytes */
};
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240220235001.57411-1-alexei.starovoitov@gmail.com
The test of linking process creates several intermediate files.
Remove them once the build is over.
This reduces the number of files in selftests/bpf/ directory
from ~4400 to ~2600.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240220231102.49090-1-alexei.starovoitov@gmail.com
Include simplified link titles in the main page's documentation index to
enhance website's readability and UX. Update the text that directs users to
various documents without changing the actual titles chosen by the authors.
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240109155643.3489369-3-carlos.bilbao@amd.com
Adjust the title of "The Linux kernel user's and administrator's guide" to
adhere to the expected reStructuredText (rst) formatting, using double
equal signs for the main header.
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240109155643.3489369-2-carlos.bilbao@amd.com
If the directory passed to the '.. kernel-feat::' directive does not
exist or the get_feat.pl script does not find any files to extract
features from, Sphinx will report the following error:
Sphinx parallel build error:
UnboundLocalError: local variable 'fname' referenced before assignment
make[2]: *** [Documentation/Makefile:102: htmldocs] Error 2
This is due to how I changed the script in c48a7c44a1 ("docs:
kernel_feat.py: fix potential command injection"). Before that, the
filename passed along to self.nestedParse() in this case was weirdly
just the whole get_feat.pl invocation.
We can fix it by doing what kernel_abi.py does -- just pass
self.arguments[0] as 'fname'.
Fixes: c48a7c44a1 ("docs: kernel_feat.py: fix potential command injection")
Cc: Justin Forbes <jforbes@fedoraproject.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20240205175133.774271-2-vegard.nossum@oracle.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Subsystem profile section entry identifier is not having its field name
that can be parsed by maintainers_include.py, unlike other sections
which have their own human-readable field names. As a result, profile
sections on rendered rst file is having weird name, 'P:'. Set the field
name as 'Subsystem Profile'.
Fixes: 4699c504e6 ("Maintainer Handbook: Maintainer Entry Profile")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240216201902.10095-1-sj@kernel.org
