In the 'fault-injection' subdirectory, the first letter F
is capitalized, whereas in index.rst f is lowercase, but in
index.rst all other elements in the same column are capitalized.
Signed-off-by: "Ran.Park" <ranpark@foxmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/tencent_3EA07E65C43816C2A8402DC655CF98916B06@qq.com
In addition to #ifdef, #define and #endif, also handle
any #if since we may be using e.g. #if IS_ENABLED(...).
I didn't find any instances of this in the kernel now,
there are enums with such ifs inside, but I didn't find
any with kernel-doc as well. However, it came up as we
were adding such a construct in our driver and warnings
from kernel-doc were the result.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240214142937.80ee86a3beae.Ibcc5bd97a20cd10a792663e4b254cd46c7e8b520@changeid
The mailman2 server running on lists.linuxfoundation.org will be shut
down in very imminent future. Update all instances of obsolete list
addresses throughout the tree with their new destinations.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240214-lf-org-list-migration-v1-1-ef1eab4b1543@linuxfoundation.org
kerneldoc.py is mostly indented with 4 spaces (like PEP8 suggests);
replace the last remaining tabs for consistency.
No functional change.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-6-vegard.nossum@oracle.com
Untangle some of the $is_macro logic and the nested conditionals.
This makes it easier to see where and how the signature is actually
printed.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-5-vegard.nossum@oracle.com
Format the entire function signature and place it in a separate variable;
this both makes it easier to understand what these lines of code are doing
and will allow us to simplify the code further in the following patch.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-4-vegard.nossum@oracle.com
Get rid of the $start variable, since it's really not necessary.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-3-vegard.nossum@oracle.com
Set 'softtabstop' to 4 spaces, which will hopefully help keep the
indentation in this file consistent going forwards.
This mirrors the modeline in scripts such as recordmcount.pl, ktest.pl,
and others.
Emacs seems to use 4 spaces to indent by default, so it doesn't require
anything special here.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-2-vegard.nossum@oracle.com
Akira Yokosawa reported [1] that the "translations" extension we added in
commit 7418ec5b15 ("docs: translations: add translations links when they
exist") broke the build on Sphinx versions v6.1.3 through 7.1.2 (possibly
others) with the following error:
Exception occurred:
File "/usr/lib/python3.12/site-packages/sphinx/util/nodes.py", line 624, in _copy_except__document
newnode = self.__class__(rawsource=self.rawsource, **self.attributes)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
TypeError: LanguagesNode.__init__() missing 1 required positional argument: 'current_language'
The full traceback has been saved in /tmp/sphinx-err-7xmwytuu.log, if you want to report the issue to the developers.
Solve this problem by making 'current_language' a true element attribute
of the LanguagesNode element, which is probably the more correct way to do
it anyway.
Tested on Sphinx 2.x, 3.x, 6.x, and 7.x.
[1]: https://lore.kernel.org/all/54a56c2e-a27c-45a0-b712-02a7bc7d2673@gmail.com/
Fixes: 7418ec5b15 ("docs: translations: add translations links when they exist")
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Closes: https://lore.kernel.org/all/54a56c2e-a27c-45a0-b712-02a7bc7d2673@gmail.com/
Tested-by: Akira Yokosawa <akiyks@gmail.com> # Sphinx 4.3.2, 5.3.0 and 6.2.1
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215064109.1193556-1-vegard.nossum@oracle.com
The ROCK Pi X is a single board computer without batteries using the
AXP288 PMIC where the EFI code does not disable the charger part of
the PMIC causing us to report a discharging battery with a continuously
consumed battery charge to userspace.
Add it to the deny-list to avoid the bogus battery status reporting.
Signed-off-by: Guoyi Zhang <kuoi@bioarchlinux.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240221083425.440108-1-kuoi@bioarchlinux.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The registers related to reset generation are located in the second
register block. However, the conversion to device life-cycle managed
ioremap function accidentally changed the mapping to the first register
block.
Fixes: 0867276eb1 ("power: reset: rmobile-reset: Use devm_platform_ioremap_resource() helper")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/3b267fb1b303f63248934a1a77bee319e1c44879.1708458882.git.geert+renesas@glider.be
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The devm_platform_ioremap_resource() function returns error points. It
never returns NULL. Update the check accordingly.
Fixes: 7ddfd33c6e ("power: reset: xgene-reboot: Use devm_platform_ioremap_resource() helper")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/fe1b90d0-7234-4e03-accc-69a119f6a7eb@moroto.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The GIC/ITS code is designed to ensure to pick up any preallocated LPI
tables on the redistributors, as enabling LPIs is a one-way switch. There
is no such restriction for vLPIs, and for GICv4.1 it is expected to
allocate a new vPE table at boot.
This works as intended when initializing an ITS, however when setting up a
redistributor in cpu_init_lpis() the early return for preallocated RD
tables skips straight past the GICv4 setup. This all comes to a head when
trying to kexec() into a new kernel, as the new kernel silently fails to
set up GICv4, leading to a complete loss of SGIs and LPIs for KVM VMs.
Slap a band-aid on the problem by ensuring its_cpu_init_lpis() always
initializes GICv4 on the way out, even if the other RD tables were
preallocated.
Fixes: 6479450f72 ("irqchip/gic-v4: Fix occasional VLPI drop")
Reported-by: George Cherian <gcherian@marvell.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219185809.286724-2-oliver.upton@linux.dev
Since we cannot immediately capture the BO's and userptr, perform it in
2 stages. The immediate stage takes a reference to each BO and userptr,
while a delayed worker captures the contents and then frees the
reference.
This is required because in signaling context, no locks can be taken, no
memory can be allocated, and no waits on userspace can be performed.
With the delayed worker, all of this can be performed very easily,
without having to resort to hacks.
Changes since v1:
- Fix crash on NULL captured vm.
- Use ascii85_encode to capture BO contents and save some space.
- Add length to coredump output for each captured area.
Changes since v2:
- Dump each mapping on their own line, to simplify tooling.
- Fix null pointer deref in xe_vm_snapshot_free.
Changes since v3:
- Don't add uninitialized value to snap->ofs. (Souza)
- Use kernel types for u32 and u64.
- Move snap_mutex destruction to final vm destruction. (Souza)
Changes since v4:
- Remove extra memset. (Souza)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-6-maarten.lankhorst@linux.intel.com
The devcoredump is done in fence signaling context. Because of this, we
cannot take any of the normal mutexes or we would invert.
Normal: Take vm->lock, dma_fence_wait()
Devcoredump: from dma_fence_wait() context, take vm->lock.
This doesn't work, and we only care about integrity, so take the locks
around additions and removals of vma's.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-5-maarten.lankhorst@linux.intel.com
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this
mapping should be dumped.
This is not hooked up, but the uapi should be ready before merging.
It's likely easier to dump the contents of the bo's at devcoredump
readout time, so it's better if the bos will stay unmodified after
a hang. The NEEDS_CPU_MAPPING flag is removed as requirement.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-3-maarten.lankhorst@linux.intel.com
This reverts commit fcf690b0b4.
When using a wilc1000 chip over a spi bus, users can optionally define a
reset gpio and a chip enable gpio. The reset line of wilc1000 is active
low, so to hold the chip in reset, a low (physical) value must be applied.
The corresponding device tree binding documentation was introduced by
commit f31ee3c0a5 ("wilc1000: Document enable-gpios and reset-gpios
properties") and correctly indicates that the reset line is an active-low
signal. The corresponding driver part, brought by commit ec031ac479
("wilc1000: Add reset/enable GPIO support to SPI driver") was applying the
correct logic. But commit fcf690b0b4 ("wifi: wilc1000: use correct
sequence of RESET for chip Power-UP/Down") eventually flipped this logic
and started misusing the gpiod APIs, applying an inverted logic when
powering up/down the chip (for example, setting the reset line to a logic
"1" during power up, which in fact asserts the reset line when device tree
describes the reset line as GPIO_ACTIVE_LOW). As a consequence, any
platform currently using the driver in SPI mode must use a faulty reset
line description in device tree, or else chip will be maintained in reset
and will not even allow to bring up the chip.
Fix reset line usage by inverting back the gpiod APIs usage, setting the
reset line to the logic value "0" when powering the chip, and the logic
value "1" when powering off the chip.
Fixes: fcf690b0b4 ("wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240217-wilc_1000_reset_line-v2-1-b216f433d7d5@bootlin.com
The ACEPC W5 Pro HDMI stick contains quite generic names in the sys_vendor
and product_name DMI strings, without this patch brcmfmac will try to load:
"brcmfmac43455-sdio.$(DEFAULT_STRING)-$(DEFAULT_STRING).txt" as nvram file
which is both too generic and messy with the $ symbols in the name.
The ACEPC W5 Pro uses the same Ampak AP6255 module as the ACEPC T8
and the nvram for the T8 is already in linux-firmware, so point the new
DMI nvram filename quirk to the T8 nvram file.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240216213649.251718-1-hdegoede@redhat.com
Map USB endpoints to hardware and AC queues according to number of USB
endpoints. However, original only give a warning for unexpected cases but
initial values are not given. Then, smatch warns:
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:642
_rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuelow'.
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:644
_rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuehi'.
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:649
_rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuehi'.
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:650
_rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuelow'.
The regular selection is high and low queues, so move default (unexpected)
case along with that.
Compile tested only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240216033949.34765-1-pkshih@realtek.com
The 'vif' is from tx_info of SKB, and other codes check 'vif' before using,
which raises smatch warnings:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5656 rtl8xxxu_tx()
warn: variable dereferenced before check 'vif' (see line 5553)
Compile tested only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240216033923.34683-1-pkshih@realtek.com
rtl8192cu is checking rtl_mac.tids when deciding if it should enable
aggregation. This is wrong because rtl_mac.tids is not initialised
anywhere. Check rtl_sta_info.tids instead, which is initialised.
Also, when enabling aggregation also enable RTS. The vendor driver does
this, my router does this. It seems like the thing to do.
Also also, it seems right to set the AMPDU density only when enabling
aggregation.
Also also also, delete the unused member rtl_mac.tids and the unused
macros RTL_AGG_ON and RTL_AGG_OFF.
Naturally, with working AMPDU the download/upload speeds are better.
Before: 59/32 Mbps.
After: 68/46 Mbps.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/4e936334-5f81-403f-a495-0628ebfb6903@gmail.com
The driver currently raises the following sparse warning:
[...] cfg80211.c:360:42: warning: incorrect type in assignment (different
base types)
[...] cfg80211.c:360:42: expected unsigned int key_mgmt_suite
[...] cfg80211.c:360:42: got restricted __be32 [usertype]
CHECK drivers/net/wireless/microchip/wilc1000/netdev.c
This conversion was needed because historically the external supplicant
(observed with wpa_supplicant) expects AKM suite as big endian in
NL80211_CMD_EXTERNAL_AUTH message when the AKM suite is WLAN_AKM_SUITE_SAE.
This is not needed anymore:
- new (to be released) versions of wpa_supplicant now reads it in host
endian _while_ keeping compatibility for older drivers
- for new drivers used with current/old wpa_supplicant, this conversion has
been added to nl80211 to force big endian when the AKM suite is
WLAN_AKM_SUITE_SAE
Remove this not-needed-anymore conversion to fix the sparse warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308290615.lUTIgqUl-lkp@intel.com/
Tested-on: WILC1000 hwB SPI WILC_WIFI_FW_REL_16_1-13452
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215-nl80211_fix_akm_suites_endianness-v1-2-57e902632f9d@bootlin.com
In [1] it was observed that the ath12k maintainers were not added to
the review of a new ath12k YAML file. Bartosz suggested "adding an N:
ath12k entry to MAINTAINERS" to prevent this in the future. In the
process it was noticed that one of the ath11k YAML files was also not
explicitly referenced, so add N: entries to ath10k, ath11k, and
ath12k, and remove the explicit F: entries.
Link: https://lore.kernel.org/linux-wireless/20240216203215.40870-7-brgl@bgdev.pl/ [1]
Suggested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240217-update-maintainer-v1-2-1426cf7a8bb1@quicinc.com
This part was commented out 25 years ago in:
commit d43c43b46ebfdb437b78206fcc1992c4d2e8c15e
Author: linus1 <torvalds@linuxfoundation.org>
Date: Tue Sep 7 11:00:00 1999 -0600
Import 2.3.26pre1
and probably no one knows why. Probably it was unused even then.
Just remove it.
[ bp: Expand commit message. ]
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126030824.579711-1-chentao@kylinos.cn
We are currently printing the CAP.NP field.
CAP.NP is a 0's based value indicating the maximum number of ports
supported by the HBA silicon. Note that the number of ports indicated
in this field may be more than the number of ports indicated in the
PI (ports implemented) register. (See AHCI 1.3.1, section 3.1.1 -
Offset 00h: CAP – HBA Capabilities.)
PI (ports implemented) register is a field that has a bit set to '1'
if that specific port is implemented. This register is allowed to have
zeroes mixed with ones, i.e. a port in the middle is allowed to be
unimplemented. (See AHCI 1.3.1, section 3.1.4 - Offset 0Ch: PI – Ports
Implemented.)
Since the number of ports implemented might be smaller than the maximum
number of ports supported by the HBA silicon, print the number of
implemented ports as well.
While at it, clarify the properties being printed, and add a separator
(,), as that is currently missing, making it very easy to get confused
if the number before or after <property> belongs to <property>.
before:
ahci 0000:00:03.0: masking port_map 0x3f -> 0x2f
ahci 0000:00:03.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x2f impl SATA mode
ahci 0000:00:03.0: flags: 64bit ncq only
after:
ahci 0000:00:03.0: masking port_map 0x3f -> 0x2f
ahci 0000:00:03.0: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
ahci 0000:00:03.0: 5/6 ports implemented (port mask 0x2f)
ahci 0000:00:03.0: flags: 64bit ncq only
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
For regular system shutdown, ata_dev_power_set_standby() will be
executed twice: once the scsi device is removed and another when
ata_pci_shutdown_one() executes and EH completes unloading the devices.
Make the second call to ata_dev_power_set_standby() do nothing by using
ata_dev_power_is_active() and return if the device is already in
standby.
Fixes: 2da4c5e24e ("ata: libata-core: Improve ata_dev_power_set_active()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Just a typographical error.
Reported-by: Edmund Grimley-Evans <edmund.grimley-evans@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240124-arm64-sve-sme-doc-v2-4-fe3964fb3c19@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The documentation for system vector length configuration does not cover all
cases where unsupported values are written, tighten it up.
Reported-by: Edmund Grimley-Evans <edmund.grimley-evans@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20240124-arm64-sve-sme-doc-v2-3-fe3964fb3c19@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ABI for SME is very like that for SVE so bits of the ABI were copied
but not adequately search and replaced, fix that.
Reported-by: Edmund Grimley-Evans <edmund.grimley-evans@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20240124-arm64-sve-sme-doc-v2-2-fe3964fb3c19@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we documented that we always clear state not shared with FPSIMD we
didn't catch all of the places that mentioned that state might not be
cleared, remove a lingering reference.
Reported-by: Edmund Grimley-Evans <edmund.grimley-evans@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240124-arm64-sve-sme-doc-v2-1-fe3964fb3c19@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
While we have test coverage for the ptrace interface in our selftests
the current programs have a number of gaps. The testing is done per
regset so does not cover interactions and at no point do any of the
tests actually run the traced processes meaning that there is no
validation that anything we read or write corresponds to register values
the process actually sees. Let's add a new program which attempts to cover
these gaps.
Each test we do performs a single ptrace write. For each test we generate
some random initial register data in memory and then fork() and trace a
child. The child will load the generated data into the registers then
trigger a breakpoint. The parent waits for the breakpoint then reads the
entire child register state via ptrace, verifying that the values expected
were actually loaded by the child. It then does the write being tested
and resumes the child. Once resumed the child saves the register state
it sees to memory and executes another breakpoint. The parent uses
process_vm_readv() to get these values from the child and verifies that
the values were as expected before cleaning up the child.
We generate configurations with combinations of vector lengths and SVCR
values and then try every ptrace write which will implement the
transition we generated. In order to control execution time (especially
in emulation) we only cover the minimum and maximum VL for each of SVE
and SME, this will ensure we generate both increasing and decreasing
changes in vector length. In order to provide a baseline test we also
check the case where we resume the child without doing a ptrace write.
In order to simplify the generation of the test count for kselftest we
will report but skip a substantial number of tests that can't actually
be expressed via a single ptrace write, several times more than we
actually run. This is noisy and will add some overhead but is very much
simpler so is probably worth the tradeoff.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240122-arm64-test-ptrace-regs-v1-1-0897f822d73e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
bus_get_dev_root() returns sp->dev_root which is set in subsys_register(),
but subsys_register() is not called by platform_bus_init().
Therefor for the platform_bus_type, bus_get_dev_root() always returns NULL.
This makes mbigen_of_create_domain() always return -ENODEV.
Don't try to retrieve the parent via bus_get_dev_root() and
unconditionally hand a NULL pointer to of_platform_device_create() to
fix this.
Fixes: fea087fc29 ("irqchip/mbigen: move to use bus_get_dev_root()")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240220111429.110666-1-chenjun102@huawei.com
Drop one extraneous struct member to quieten a warning:
drivers/irqchip/irq-vic.c:73: warning: Excess struct member 'parent_irq' description in 'vic_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240221064104.7863-1-rdunlap@infradead.org
When a struct containing a flexible array is included in another struct,
and there is a member after the struct-with-flex-array, there is a
possibility of memory overlap. These cases must be audited [1]. See:
struct inner {
...
int flex[];
};
struct outer {
...
struct inner header;
int overlap;
...
};
This is the scenario for all the "struct *_filter" structures that are
included in the following "struct ib_flow_spec_*" structures:
struct ib_flow_spec_eth
struct ib_flow_spec_ib
struct ib_flow_spec_ipv4
struct ib_flow_spec_ipv6
struct ib_flow_spec_tcp_udp
struct ib_flow_spec_tunnel
struct ib_flow_spec_esp
struct ib_flow_spec_gre
struct ib_flow_spec_mpls
The pattern is like the one shown below:
struct *_filter {
...
u8 real_sz[];
};
struct ib_flow_spec_* {
...
struct *_filter val;
struct *_filter mask;
};
In this case, the trailing flexible array "real_sz" is never allocated
and is only used to calculate the size of the structures. Here the use
of the "offsetof" helper can be changed by the "sizeof" operator because
the goal is to get the size of these structures. Therefore, the trailing
flexible arrays can also be removed.
However, due to the trailing padding that can be induced in structs it
is possible that the:
offsetof(struct *_filter, real_sz) != sizeof(struct *_filter)
This situation happens with the "struct ib_flow_ipv6_filter" and to
avoid it the "__packed" macro is used in this structure. But now, the
"sizeof(struct ib_flow_ipv6_filter)" has changed. This is not a problem
since this size is not used in the code.
The situation now is that "sizeof(struct ib_flow_spec_ipv6)" has also
changed (this struct contains the struct ib_flow_ipv6_filter). This is
also not a problem since it is only used to set the size of the "union
ib_flow_spec", which can store all the "ib_flow_spec_*" structures.
Link: https://lore.kernel.org/r/20240217142913.4285-1-erick.archer@gmx.com
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mad_client will be initialized in enable_device_and_get(), while the
devices_rwsem will be downgraded to a read semaphore. There is a window
that leads to the failed initialization for cm_client, since it can not
get matched mad port from ib_mad_port_list, and the matched mad port will
be added to the list after that.
mad_client | cm_client
------------------|--------------------------------------------------------
ib_register_device|
enable_device_and_get
down_write(&devices_rwsem)
xa_set_mark(&devices, DEVICE_REGISTERED)
downgrade_write(&devices_rwsem)
|
|ib_cm_init
|ib_register_client(&cm_client)
|down_read(&devices_rwsem)
|xa_for_each_marked (&devices, DEVICE_REGISTERED)
|add_client_context
|cm_add_one
|ib_register_mad_agent
|ib_get_mad_port
|__ib_get_mad_port
|list_for_each_entry(entry, &ib_mad_port_list, port_list)
|return NULL
|up_read(&devices_rwsem)
|
add_client_context|
ib_mad_init_device|
ib_mad_port_open |
list_add_tail(&port_priv->port_list, &ib_mad_port_list)
up_read(&devices_rwsem)
|
Fix it by using down_write(&devices_rwsem) in ib_register_client().
Fixes: d0899892ed ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/20240203035313.98991-1-lishifeng@sangfor.com.cn
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
used instead of ignored, causing NULL pointer dereferences.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmXVztAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOgYgf/ftnjbTLvRZ56tgRNH13VXlhpgFIa
6H+DRQO2dEfEXFh9AbEeFJBZ7M6emXMCqtolh8a0Ulq09sPaI8jWwn6uST860l19
mzMJVRgbYZ7vbxq5bEuYovpMNg42mqMOu7sxWmu4pw0slPMfHftv5lNjaWVjC1RF
Ohb5d1ftglxuxS0EyewPdHpGpUpHsNfDZ6CilX4v+5mn9IKhJN++Afgy6YhaRriO
YICL1kYv+a43LRtNyq8aYWw7eEqD0OEbJVy4ZarBFTxdzqctNRuB1WXet1tE1rjU
qpBHhiGMPTuv4bXFksAdmMTV+Z/6tQ+/KLFyXPtQ/k+KubaxbVfRBAhIFg==
=Y5R6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two fixes for ARM ITS emulation. Unmapped interrupts were used instead
of ignored, causing NULL pointer dereferences"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
Add the Chips and Media wave521cl video decoder/encoder node on J721S2.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Link: https://lore.kernel.org/r/20240220191413.3355007-3-b-brnich@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
AM69 SK has S28HS512T OSPI flash connected to MCU OSPI0.
Enable support for the same. Also describe the partition
information according to the offsets in the bootloader.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Link: https://lore.kernel.org/r/20240220162527.663394-3-sabiya.d@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
AM69 SK board has several CAN bus interfaces on both MCU and MAIN domains.
This enables the CAN interfaces on MCU and MAIN domain.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Link: https://lore.kernel.org/r/20240220162527.663394-2-sabiya.d@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable symbols so that overlays can be applied on the base DTB for
SK-AM62P.
Also compile-test known-to-work camera sensor overlays for OV5640 and
IMX219.
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240220-am62p_csi-v2-4-3e71d9945571@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
