Switch to per-device debugs in the hdcp code so we see at least which
device is involved. Should proably also print the connector/encoder/etc.
in there, but left that for the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
for_each_old_global_obj_in_state() gives us the old state, not the
new state. Correct the name of the macro argument.
Note that while the argument was misnamed the macro did work
correctly regardless.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208151720.7866-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
With v1 page table, the AMD IOMMU spec states that the hardware must use
the domain ID to tag its internal translation caches. I/O devices with
different v1 page tables must be given different domain IDs. I/O devices
that share the same v1 page table __may__ be given the same domain ID.
This domain ID management policy is currently implemented by the AMD
IOMMU driver. In this case, only the domain ID is needed when issuing the
INVALIDATE_IOMMU_PAGES command to invalidate the IOMMU translation cache
(TLB).
With v2 page table, the hardware uses domain ID and PASID as parameters
to tag and issue the INVALIDATE_IOMMU_PAGES command. Since the GCR3 table
is setup per-device, and there is no guarantee for PASID to be unique
across multiple devices. The same PASID for different devices could
have different v2 page tables. In such case, if multiple devices share the
same domain ID, IOMMU translation cache for these devices would be polluted
due to TLB aliasing.
Hence, avoid the TLB aliasing issue with v2 page table by allocating unique
domain ID for each device even when multiple devices are sharing the same v1
page table. Please note that this fix would result in multiple
INVALIDATE_IOMMU_PAGES commands (one per domain id) when unmapping a
translation.
Domain ID can be shared until device starts using PASID. We will enhance this
code later where we will allocate per device domain ID only when its needed.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-18-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since they are moved to struct iommu_dev_data, and the driver has been
ported to use them.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-17-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Consolidate all flush related code in one place so that its easy
to maintain.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-16-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We have removed iommu_v2 module and converted v2 page table to use
common flush functions. Also we have moved GCR3 table to per device.
PASID related functions are not used. Hence remove these unused
functions.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-15-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To use the new per-device struct gcr3_tbl_info. Use GFP_KERNEL flag
instead of GFP_ATOMIC for GCR3 table allocation. Also modify
set_dte_entry() to use new per device GCR3 table.
Also in free_gcr3_table() path replace BUG_ON with WARN_ON_ONCE().
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-14-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To removes the code to setup GCR3 table, and only handle domain
create / destroy, since GCR3 is no longer part of a domain.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-13-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If domain is configured with V2 page table then setup default GCR3
with domain GCR3 pointer. So that all devices in the domain uses same page
table for translation. Also return page table setup status from do_attach()
function.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-12-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Refactor GCR3 helper functions in preparation to use per device
GCR3 table.
* Add new function update_gcr3 to update per device GCR3 table
* Remove per domain default GCR3 setup during v2 page table allocation.
Subsequent patch will add support to setup default gcr3 while
attaching device to domain.
* Remove amd_iommu_domain_update() from V2 page table path as device
detach path will take care of updating the domain.
* Consolidate GCR3 table related code in one place so that its easy
to maintain.
* Rename functions to reflect its usage.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add function to check iommu group mutex lock. So that device drivers can
rely on group mutex lock instead of adding another driver level lock
before modifying driver specific device data structure.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Consolidate GCR3 table related code in one place so that its easy
to maintain.
Note that this patch doesn't move __set_gcr3/__clear_gcr3. We are moving
GCR3 table from per domain to per device. Following series will rework
these functions. During that time I will move these functions as well.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support to invalidate TLB/IOTLB for the given device.
These functions will be used in subsequent patches where we will
introduce per device GCR3 table and SVA support.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Page table mode (v1, v2 or pt) is per domain property. Recently we have
enhanced protection_domain.pd_mode to track per domain page table mode.
Use that variable to check the page table mode instead of global
'amd_iommu_pgtable' in {map/unmap}_pages path.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD IOMMU GCR3 table is indexed by PASID. Each entry stores guest CR3
register value, which is an address to the root of guest IO page table.
The GCR3 table can be programmed per-device. However, Linux AMD IOMMU
driver currently managing the table on a per-domain basis.
PASID is a device feature. When SVA is enabled it will bind PASID to
device, not domain. Hence it makes sense to have per device GCR3 table.
Introduce struct iommu_dev_data.gcr3_tbl_info to keep track of GCR3 table
configuration. This will eventually replaces gcr3 related variables in
protection_domain structure.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This enum variable is used to track the type of page table used by the
protection domain. It will replace the protection_domain.flags in
subsequent series.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce get_amd_iommu_from_dev() and get_amd_iommu_from_dev_data().
And replace rlookup_amd_iommu() with the new helper function where
applicable to avoid unnecessary loop to look up struct amd_iommu from
struct device.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU Guest Translation (GT) feature needs to be enabled before
invalidating guest translations (CMD_INV_IOMMU_PAGES with GN=1).
Currently GT feature is enabled after setting up interrupt handler.
So far it was fine as we were not invalidating guest page table
before this point.
Upcoming series will introduce per device GCR3 table and it will
invalidate guest pages after configuring. Hence move GT feature
enablement to early_enable_iommu().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
.. as IOMMU perf counters are always built as part of kernel.
No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Jinjian Song says:
====================
net: wwan: t7xx: Add fastboot interface
Add support for t7xx WWAN device firmware flashing & coredump collection
using fastboot interface.
Using fastboot protocol command through /dev/wwan0fastboot0 WWAN port to
support firmware flashing and coredump collection, userspace get device
mode from /sys/bus/pci/devices/${bdf}/t7xx_mode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On early detection of wwan device in fastboot mode, driver sets
up CLDMA0 HW tx/rx queues for raw data transfer and then create
fastboot port to userspace.
Application can use this port to flash firmware and collect
core dump by fastboot protocol commands.
E.g., flash firmware through fastboot port:
- "download:%08x": write data to memory with the download size.
- "flash:%s": write the previously downloaded image to the named partition.
- "reboot": reboot the device.
Link: https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.md
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To support cases such as FW update or Core dump, the t7xx
device is capable of signaling the host that a special port
needs to be created before the handshake phase.
Adds the infrastructure required to create the early ports
which also requires a different configuration of CLDMA queues.
Base on the v5 patch version of follow series:
'net: wwan: t7xx: fw flashing & coredump support'
(https://patchwork.kernel.org/project/netdevbpf/patch/3777bb382f4b0395cb594a602c5c79dbab86c9e0.1674307425.git.m.chetan.kumar@linux.intel.com/)
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for userspace to get/set the device mode, device's state
machine changes between (unknown/ready/reset/fastboot).
Get the device state mode:
- 'cat /sys/bus/pci/devices/${bdf}/t7xx_mode'
Set the device state mode:
- reset(cold reset): 'echo reset > /sys/bus/pci/devices/${bdf}/t7xx_mode'
- fastboot: 'echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode'
Reload driver to get the new device state after setting operation.
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new WWAN port that connects to the device fastboot protocol
interface.
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While looking at improving the saved_cmdlines cache I found a huge amount
of wasted memory that should be used for the cmdlines.
The tracing data saves pids during the trace. At sched switch, if a trace
occurred, it will save the comm of the task that did the trace. This is
saved in a "cache" that maps pids to comms and exposed to user space via
the /sys/kernel/tracing/saved_cmdlines file. Currently it only caches by
default 128 comms.
The structure that uses this creates an array to store the pids using
PID_MAX_DEFAULT (which is usually set to 32768). This causes the structure
to be of the size of 131104 bytes on 64 bit machines.
In hex: 131104 = 0x20020, and since the kernel allocates generic memory in
powers of two, the kernel would allocate 0x40000 or 262144 bytes to store
this structure. That leaves 131040 bytes of wasted space.
Worse, the structure points to an allocated array to store the comm names,
which is 16 bytes times the amount of names to save (currently 128), which
is 2048 bytes. Instead of allocating a separate array, make the structure
end with a variable length string and use the extra space for that.
This is similar to a recommendation that Linus had made about eventfs_inode names:
https://lore.kernel.org/all/20240130190355.11486-5-torvalds@linux-foundation.org/
Instead of allocating a separate string array to hold the saved comms,
have the structure end with: char saved_cmdlines[]; and round up to the
next power of two over sizeof(struct saved_cmdline_buffers) + num_cmdlines * TASK_COMM_LEN
It will use this extra space for the saved_cmdline portion.
Now, instead of saving only 128 comms by default, by using this wasted
space at the end of the structure it can save over 8000 comms and even
saves space by removing the need for allocating the other array.
Link: https://lore.kernel.org/linux-trace-kernel/20240209063622.1f7b6d5f@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Mete Durlu <meted@linux.ibm.com>
Fixes: 939c7a4f04 ("tracing: Introduce saved_cmdlines_size file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, we base the KASLR randomization range on a rough estimate of
the available space in the upper VA region: the lower 1/4th has the
module region and the upper 1/4th has the fixmap, vmemmap and PCI I/O
ranges, and so we pick a random location in the remaining space in the
middle.
Once we enable support for 5-level paging with 4k pages, this no longer
works: the vmemmap region, being dimensioned to cover a 52-bit linear
region, takes up so much space in the upper VA region (the size of which
is based on a 48-bit VA space for compatibility with non-LVA hardware)
that the region above the vmalloc region takes up more than a quarter of
the available space.
So instead of a heuristic, let's derive the randomization range from the
actual boundaries of the vmalloc region.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231213084024.2367360-16-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
The vmemmap array is statically sized based on the maximum supported
size of the virtual address space, but it is located inside the upper VA
region, which is statically sized based on the *minimum* supported size
of the VA space. This doesn't matter much when using 64k pages, which is
the only configuration that currently supports 52-bit virtual
addressing.
However, upcoming LPA2 support will change this picture somewhat, as in
that case, the vmemmap array will take up more than 25% of the upper VA
region when using 4k pages. Given that most of this space is never used
when running on a system that does not support 52-bit virtual
addressing, let's reclaim the unused vmemmap area in that case.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231213084024.2367360-15-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
The placement and size of the vmemmap region in the kernel virtual
address space is currently derived from the base2 order of the size of a
struct page. This makes for nicely aligned constants with lots of
leading 0xf and trailing 0x0 digits, but given that the actual struct
pages are indexed as an ordinary array, this resulting region is
severely overdimensioned when the size of a struct page is just over a
power of 2.
This doesn't matter today, but once we enable 52-bit virtual addressing
for 4k pages configurations, the vmemmap region may take up almost half
of the upper VA region with the current struct page upper bound at 64
bytes. And once we enable KMSAN or other features that push the size of
a struct page over 64 bytes, we will run out of VMALLOC space entirely.
So instead, let's derive the region size from the actual size of a
struct page, and place the entire region 1 GB from the top of the VA
space, where it still doesn't share any lower level translation table
entries with the fixmap.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231213084024.2367360-14-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
We will soon reclaim the part of the vmemmap region that covers VA space
that is not addressable by the hardware. To avoid confusion, ensure that
the 'vmemmap start' marker points at the start of the region that is
actually being used for the struct page array, rather than the start of
the region we set aside for it at build time.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231213084024.2367360-13-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Rework the way the address_markers array is populated so that we can
tolerate values that are not compile time constants generally, rather
than keeping track manually of the array indexes in question, and poking
new values into them manually. This will be needed for VMALLOC_END,
which will cease to be a compile time constant after a subsequent patch.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231213084024.2367360-12-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Move the fixmap region above the vmemmap region, so that the start of
the vmemmap delineates the end of the region available for vmalloc and
vmap allocations and the randomized placement of the kernel and modules.
In a subsequent patch, we will take advantage of this to reclaim most of
the vmemmap area when running a 52-bit VA capable build with 52-bit
virtual addressing disabled at runtime.
Note that the existing guard region of 256 MiB covers the fixmap and PCI
I/O regions as well, so we can reduce it 8 MiB, which is what we use in
other places too.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231213084024.2367360-11-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Move the PCI I/O region above the vmemmap region in the kernel's VA
space. This will permit us to reclaim the lower part of the vmemmap
region for vmalloc/vmap allocations when running a 52-bit VA capable
build on a 48-bit VA capable system.
Also, given that PCI_IO_START is derived from VMEMMAP_END, use that
symbolic constant directly in ptdump rather than deriving it from
VMEMMAP_START and VMEMMAP_SIZE, as those definitions will change in
subsequent patches.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231213084024.2367360-10-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
The magazine buffers can take gigabytes of kmem memory, dominating all
other allocations. For observability purpose create named slab cache so
the iova magazine memory overhead can be clearly observed.
With this change:
> slabtop -o | head
Active / Total Objects (% used) : 869731 / 952904 (91.3%)
Active / Total Slabs (% used) : 103411 / 103974 (99.5%)
Active / Total Caches (% used) : 135 / 211 (64.0%)
Active / Total Size (% used) : 395389.68K / 411430.20K (96.1%)
Minimum / Average / Maximum Object : 0.02K / 0.43K / 8.00K
OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME
244412 244239 99% 1.00K 61103 4 244412K iommu_iova_magazine
91636 88343 96% 0.03K 739 124 2956K kmalloc-32
75744 74844 98% 0.12K 2367 32 9468K kernfs_node_cache
On this machine it is now clear that magazine use 242M of kmem memory.
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
[ rm: adjust to rework of iova_cache_{get,put} ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/dc5c51aaba50906a92b9ba1a5137ed462484a7be.1707144953.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iova_cache_{get,put}() calls really represent top-level lifecycle
management for the whole IOVA library, so it's long been rather
confusing to have them buried right in the middle of the allocator
implementation details. Move them to a more expected position at the end
of the file, where it will then also be easier to expand them. With
this, we can also move the rcache hotplug handler (plus another stray
function) into the rcache portion of the file.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/d4753562f4faa0e6b3aeebcbf88fdb60cc22d715.1707144953.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
