Failure handling in iova_cache_get() is a little messy, and we'd like
to add some more to it, so let's tidy up a bit first. By leaving the
hotplug handler until last we can take advantage of kmem_cache_destroy()
being NULL-safe to have a single cleanup label. We can also improve the
error reporting, noting that kmem_cache_create() already screams if it
fails, so that one is redundant.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/ae4a3bda2d6a9b738221553c838d30473bd624e7.1707144953.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These macros are not used after commit 518d9b4503 ("iommu/amd: Remove
special mapping code for dma_ops path").
No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These macros are not used after commit ac6d704679 ("iommu/dma: Pass
address limit rather than size to iommu_setup_dma_ops()").
No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Similar to the existing "ports" node name, coresight device tree bindings
have added "in-ports" and "out-ports" as standard node names for a
collection of ports.
Add support for these name to of_graph_get_port_parent() so that
remote-endpoint parsing can find the correct parent node for these
coresight ports too.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240207011803.2637531-4-saravanak@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
After commit 4a032827da ("of: property: Simplify of_link_to_phandle()"),
remote-endpoint properties created a fwnode link from the consumer device
to the supplier endpoint. This is a tiny bit inefficient (not buggy) when
trying to create device links or detecting cycles. So, improve this the
same way we improved finding the consumer of a remote-endpoint property.
Fixes: 4a032827da ("of: property: Simplify of_link_to_phandle()")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240207011803.2637531-3-saravanak@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
We have a more accurate function to find the right consumer of a
remote-endpoint property instead of searching for a parent with
compatible string property. So, use that instead. While at it, make the
code to find the consumer a bit more flexible and based on the property
being parsed.
Fixes: f7514a6630 ("of: property: fw_devlink: Add support for remote-endpoint")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240207011803.2637531-2-saravanak@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
shmem ensures the memory is cleared on allocation, however here we are
using TTM, which doesn't natively support shmem (other than for swap),
but instead just allocates normal system memory. And we only zero such
memory for userspace allocations. In the case of intel_fbdev we are
missing the memset_io() since display path incorrectly thinks object is
shmem based.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205153110.38340-2-matthew.auld@intel.com
This reverts commit 398aa9a7e7.
The update to the gadget API to support EBC feature is incomplete. It's
missing at least the following:
* New usage documentation
* Gadget capability check
* Condition for the user to check how many and which endpoints can be
used as "fifo_mode"
* Description of how it can affect completed request (e.g. dwc3 won't
update TRB on completion -- ie. how it can affect request's actual
length report)
Let's revert this until it's ready.
Fixes: 398aa9a7e7 ("usb: dwc3: Support EBC feature of DWC_usb31")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3042f847ff904b4dd4e4cf66a1b9df470e63439e.1707441690.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Wood says:
====================
netconsole: Add userdata append support
Add the ability to add custom userdata to every outbound netconsole message
as a collection of key/value pairs, allowing users to add metadata to every
netconsole message which can be used for for tagging, filtering, and
aggregating log messages.
In a previous patch series the ability to prepend the uname release was
added towards the goals above. This patch series builds on that
idea to allow any userdata, keyed by a user provided name, to be
included in netconsole messages.
If CONFIG_NETCONSOLE_DYNAMIC is enabled an additional userdata
directory will be presented in the netconsole configfs tree, allowing
the addition of userdata entries.
/sys/kernel/config/netconsole/
<target>/
enabled
release
dev_name
local_port
remote_port
local_ip
remote_ip
local_mac
remote_mac
userdata/
<key>/
value
<key>/
value
...
v1->v2:
* Updated netconsole_target docs, kdoc is now clean
v2->v3:
* Remove inline keyword from to_userdat* functions
* Break up some lines that exceeded 80 chars
* Replace typos and remove {} from single line if statement
* Remove unused variable
Testing for this series is as follows:
Build every patch without CONFIG_NETCONSOLE_DYNAMIC, and also built
with CONFIG_NETCONSOLE_DYNAMIC enabled for every patch after the config
option was added
Test Userdata configfs
# Adding userdata
cd /sys/kernel/config/netconsole/ && mkdir cmdline0 && cd cmdline0
mkdir userdata/release && echo hotfix1 > userdata/release/value
preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
[[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail
mkdir userdata/testing && echo something > userdata/testing/value
preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
[[ "$preview" == $'release=hotfix1\ntesting=something' ]] && echo pass || echo fail
#
# Removing Userdata
rmdir userdata/testing
preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
[[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail
rmdir userdata/release
preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
[[ "$preview" == $'' ]] && echo pass || echo fail
#
# Adding userdata key with too large of 6.7.0-rc8-virtme,12,481,17954104,-directory name [<54 chars]
mkdir userdata/testing12345678901234567890123456789012345678901234567890
[[ $? == 1 ]] && echo pass || echo fail
#
# Adding userdata value with too large of value [<200 chars]
mkdir userdata/testing
echo `for i in {1..201};do printf "%s" "v";done` > userdata/testing/value
[[ $? == 1 ]] && echo pass || echo fail
rmdir userdata/testing
- Output:
pass
pass
pass
pass
pass
mkdir: cannot create directory ‘cmdline0/userdata/testing12345678901234567890123456789012345678901234567890’: File name too long
pass
bash: echo: write error: Message too long
pass
Test netconsole messages (w/ msg fragmentation)
echo `for i in {1..996};do printf "%s" "v";done` > /dev/kmsg
- Output:
6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=0/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=952/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
Test empty userdatum
cd /sys/kernel/config/netconsole/ && mkdir cmdline0
mkdir cmdline0/userdata/empty
echo test > /dev/kmsg
rmdir cmdline0/userdata/empty
- Output:
Test netconsole messages (w/o userdata fragmentation)
cd /sys/kernel/config/netconsole/ && mkdir cmdline0
mkdir cmdline0/userdata/release && echo hotfix1 > cmdline0/userdata/release/value
mkdir cmdline0/userdata/testing && echo something > cmdline0/userdata/testing/value
echo test > /dev/kmsg
rmdir cmdline0/userdata/release
rmdir cmdline0/userdata/testing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Regardless of whether the original message body or formatted userdata
exceeds the MAX_PRINT_CHUNK, append userdata to the netconsole message
starting with the first chunk that has available space after writing the
body.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Append userdata to outgoing unfragmented (<1000 bytes) netconsole messages.
When sending messages the userdata string is already formatted and stored
in netconsole_target->userdata_complete.
Always write the outgoing message to buf, so userdata can be appended in
a standard fashion. This is a change from only using buf when the
release needs to be prepended to the message.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Store a formatted string for userdata that will be appended to netconsole
messages. The string has a capacity of 4KB, as calculated by the userdatum
entry length of 256 bytes and a max of 16 userdata entries.
Update the stored netconsole_target->userdata_complete string with the new
formatted userdata values when a userdatum is created, edited, or
removed. Each userdata entry contains a trailing newline, which will be
formatted as such in netconsole messages::
6.7.0-rc8-virtme,12,500,1646292204,-;test
release=foo
something=bar
6.7.0-rc8-virtme,12,500,1646292204,-;another test
release=foo
something=bar
Enforcement of MAX_USERDATA_ITEMS is done in userdatum_make_item;
update_userdata will not check for this case but will skip any userdata
children over the limit of MAX_USERDATA_ITEMs.
If a userdata entry/dir is created but no value is provided, that entry
will be skipped. This is in part because update_userdata() can't be
called in userdatum_make_item() since the item will not have been added
to the userdata config_group children yet. To preserve the experience of
adding an empty userdata that doesn't show up in the netconsole
messages, purposefully skip empty userdata items even when
update_userdata() can be called.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create configfs machinery for netconsole userdata appending, which depends
on CONFIG_NETCONSOLE_DYNAMIC (for configfs interface). Add a userdata
config_group to netconsole_target for managing userdata entries as a tree
under the netconsole configfs subsystem. Directory names created under the
userdata directory become userdatum keys; the userdatum value is the
content of the value file.
Include the minimum-viable-changes for userdata configfs config_group.
init_target_config_group() ties in the complete configfs machinery to
avoid unused func/variable errors during build. Initializing the
netconsole_target->group is moved to init_target_config_group, which
will also init and add the userdata config_group.
Each userdatum entry has a limit of 256 bytes (54 for
the key/directory, 200 for the value, and 2 for '=' and '\n'
characters), which is enforced by the configfs functions for updating
the userdata config_group.
When a new netconsole_target is created, initialize the userdata
config_group and add it as a default group for netconsole_target
config_group, allowing the userdata configfs sub-tree to be presented
in the netconsole configfs tree under the userdata directory.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new User Data section to the netconsole docs to describe the
appending of user data capability (for netconsole dynamic configuration)
with usage and netconsole output examples.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move newline trimming logic from `dev_name_store()` to a new function
(trim_newline()) for shared use in netconsole.c
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support a nested userdata config_group in later patches,
use a config_group for netconsole_target instead of a
config_item. It's a no-op functionality-wise, since
config_group maintains all features of a config_item via the cg_item
member.
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Address checkpatch lint suggestions in preparation for later changes
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Existing DSDT or SSDT platforms hard-code clock and frame shape
configurations. For validation, we'd like to use alternate
configurations. It's not always possible to generate new tables due to
missing symbols, and modifying existing objects usually leads to
AE_OBJECT_EXIST errors.
The mechanism suggested in this patch is to add a NEW ACPI controller
device with a different _ADR value. e.g.
Scope (_SB_.PC00.RP08.PXSX.HDAS) {
Device (SDWP)
{
Name (_ADR, 0x40000001) // _ADR: Address
The desired _ADR can be passed as a parameter with
options snd-intel-sdw-acpi sdw_ctrl_addr=0x40000001
This solution leads to minimal tables with just what the developers or
validation engineers need, and without overriding any of the existing
firmware definitions. It's consistent with the recommendation to
extend ACPI definitions and not redefine them with a risk of conflict.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240208163750.92849-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 60c8971899 ("ftrace: Make DIRECT_CALLS work WITH_ARGS
and !WITH_REGS") changed DIRECT_CALLS to use SAVE_ARGS when there
are multiple ftrace_ops at the same function, but since the x86 only
support to jump to direct_call from ftrace_regs_caller, when we set
the function tracer on the same target function on x86, ftrace-direct
does not work as below (this actually works on arm64.)
At first, insmod ftrace-direct.ko to put a direct_call on
'wake_up_process()'.
# insmod kernel/samples/ftrace/ftrace-direct.ko
# less trace
...
<idle>-0 [006] ..s1. 564.686958: my_direct_func: waking up rcu_preempt-17
<idle>-0 [007] ..s1. 564.687836: my_direct_func: waking up kcompactd0-63
<idle>-0 [006] ..s1. 564.690926: my_direct_func: waking up rcu_preempt-17
<idle>-0 [006] ..s1. 564.696872: my_direct_func: waking up rcu_preempt-17
<idle>-0 [007] ..s1. 565.191982: my_direct_func: waking up kcompactd0-63
Setup a function filter to the 'wake_up_process' too, and enable it.
# cd /sys/kernel/tracing/
# echo wake_up_process > set_ftrace_filter
# echo function > current_tracer
# less trace
...
<idle>-0 [006] ..s3. 686.180972: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s3. 686.186919: wake_up_process <-call_timer_fn
<idle>-0 [002] ..s3. 686.264049: wake_up_process <-call_timer_fn
<idle>-0 [002] d.h6. 686.515216: wake_up_process <-kick_pool
<idle>-0 [002] d.h6. 686.691386: wake_up_process <-kick_pool
Then, only function tracer is shown on x86.
But if you enable 'kprobe on ftrace' event (which uses SAVE_REGS flag)
on the same function, it is shown again.
# echo 'p wake_up_process' >> dynamic_events
# echo 1 > events/kprobes/p_wake_up_process_0/enable
# echo > trace
# less trace
...
<idle>-0 [006] ..s2. 2710.345919: p_wake_up_process_0: (wake_up_process+0x4/0x20)
<idle>-0 [006] ..s3. 2710.345923: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s1. 2710.345928: my_direct_func: waking up rcu_preempt-17
<idle>-0 [006] ..s2. 2710.349931: p_wake_up_process_0: (wake_up_process+0x4/0x20)
<idle>-0 [006] ..s3. 2710.349934: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s1. 2710.349937: my_direct_func: waking up rcu_preempt-17
To fix this issue, use SAVE_REGS flag for multiple ftrace_ops flag of
direct_call by default.
Link: https://lore.kernel.org/linux-trace-kernel/170484558617.178953.1590516949390270842.stgit@devnote2
Fixes: 60c8971899 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS")
Cc: stable@vger.kernel.org
Cc: Florent Revest <revest@chromium.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Convert the remaining drm_debug_printer users over to drm_dbg_printer,
as it can handle the cases without struct drm_device pointer, and also
provides drm debug category and prefix support. Remove drm_debug_printer
altogether.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/18b5b91e62d071675a651f6f91c58f05ad74134a.1705410327.git.jani.nikula@intel.com
We've lacked a device specific debug printer. Add one. Take category
into account too.
__builtin_return_address(0) is inaccurate here, so don't use it. If
necessary, we can later pass __func__ to drm_dbg_printer() by wrapping
it inside a macro.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/48607d58e5cdf8341ffdd522257542fa2ce41a19.1705410327.git.jani.nikula@intel.com
This patch resolves a spelling error in the filesystem documentation.
It is submitted as part of my application to the "Linux Kernel Bug
Fixing Spring Unpaid 2024" mentorship program of the Linux Kernel
Foundation.
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Link: https://lore.kernel.org/r/20240208162032.109184-1-vincenzo.mezzela@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The low power policy board type was introduced to allow systems
to get into deep states reliably. Before it was introduced `min_power`
was causing problems for a number of drives. New power policies
`min_power_with_partial` and `med_power_with_dipm` have been introduced
which provide a more stable baseline for systems.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[cassel: rebase patch and fix trivial conflicts]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
AHCI 1.3.3, 7.3.1.1 Software Flow for Hot Plug Removal Detection states:
"To reliably detect hot plug removals, software must disable interface
power management.
Software should perform the following initialization on a port after a
device is attached:
-Set PxSCTL.IPM to 3h to disable interface power management state
transitions.
-Set PxCMD.ALPE to ‘0’ to disable aggressive power management.
-Ensure PxIE.PRCE is set to ‘1’ to enable interrupts on hot plug removals.
-Disable device initiated interface power management by issuing the
appropriate SET FEATURES command."
Further, AHCI 1.3.3, 7.3 Native Hot Plug Support states:
"The HBA shall set the PxSERR.DIAG.X bit to ‘1’ when a COMINIT is received
from the device. Hot plug insertions are detected via the PxIS.PCS bit
that directly reflects the PxSERR.DIAG.X bit. The HBA shall set the
PxSERR.DIAG.N bit to ‘1’ when the HBA’s internal PhyRdy signal changes
state.
Hot plug removals are detected via the PxIS.PRCS bit that directly
reflects the PxSERR.DIAG.N bit. Note that PxSERR.DIAG.N is also set
to ‘1’ on insertions and during interface power management entry/exit."
ahci_set_lpm() already disables the PxIS.PRCS interrupt if setting a
LPM policy != ATA_LPM_MAX_POWER, so we cannot detect hot plug removals
when LPM policy != ATA_LPM_MAX_POWER.
We do have PxIS.PCS interrupt enabled even for LPM policy !=
ATA_LPM_MAX_POWER, so we should theoretically still be able to detect
hot plug insertions even when LPM is enabled.
However, in practise, for LPM policy ATA_LPM_MED_POWER_WITH_DIPM,
ATA_LPM_MIN_POWER_WITH_PARTIAL, and ATA_LPM_MIN_POWER, if there is
no link enabled, sata_link_scr_lpm() will set SControl.DET = 0x4,
which will transition the port to the "P:Offline" state.
The P:Offline mode is described in SATA Gold 3.5a:
4.1.1.103 Phy offline:
"In this mode the host Phy is forced off and the host Phy does not
recognize nor respond to COMINIT or COMWAKE. This mode is entered by
setting the DET field of the SControl register to 0100b. This is a
mechanism for the host to turn off its Phy."
So in the P:Offline state the PHY does not recognize the unsolicited
COMINIT which is sent on a hot plug insertion.
While we could change sata_link_scr_lpm() to never power off an external
port for LPM policy != ATA_LPM_MAX_POWER (in order be able to handle hot
plug insertions), we still would not be able to handle hot plug removals.
Thus, simply modify ahci_update_initial_lpm_policy() to not enable LPM if
the port advertises itself as an external port, as this function is
already being used to set/override the initial LPM policy.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
There is no need for ahci_update_initial_lpm_policy() to take hpriv as a
parameter, it can easily be derived from the ata_port.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Jian-Hong Pan <jhp@endlessos.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
A hotplug capable port is an external port, so mark it as such.
We even say this ourselves in libata-scsi.c:
/* set scsi removable (RMB) bit per ata bit, or if the
* AHCI port says it's external (Hotplug-capable, eSATA).
*/
This also matches the terminology used in AHCI 1.3.1
(the keyword to search for is "externally accessible").
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Move the marking of an external port earlier in the call chain.
This is needed for further cleanups.
No functional change intended.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Refactor pci_epf_alloc_space() API to accept "epc_features" as a parameter.
This is a preparatory work to make the API more robust.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240207213922.1796533-2-cassel@kernel.org
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
