Per qoriq-thermal.yaml, 'big-endian' is not a valid property.
When the 'little-endian' property is absent, the default is big endian.
Remove it to fix the following schema warning:
tmu@1f00000: 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The display is in landscape orientation, but the touchscreen is in portrait
orientation. Specify that properly in the devicetree.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Calling fd_install() makes a file reachable for userland, including the
possibility to close the file descriptor, which leads to calling its
'release' hook. If that happens before the code had a chance to bump the
reference of the newly created task struct, the release callback will
call put_task_struct() too early, leading to the premature destruction
of the kernel thread.
Avoid that race by calling fd_install() later, after all the setup is
done.
Fixes: 1c6fdbd8f2 ("bcachefs: Initial commit")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Some PAPR system parameter values are formatted by firmware as
nul-terminated strings (e.g. LPAR name, shared processor attributes).
But the values returned for other parameters, such as processor module
info and TLB block invalidate characteristics, are binary data with
parameter-specific layouts. So char[] isn't the appropriate type for
the general case. Use u8/__u8.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 905b9e4878 ("powerpc/pseries/papr-sysparm: Expose character device to user space")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240202-papr-sysparm-ioblock-data-use-u8-v1-1-f5c6c89f65ec@linux.ibm.com
Due to CPU lifetime consideration of the SoC manufacturer [1] and
the preferred area of operation in the industrial related
environment, set the maximum frequency for each DHCOM i.MX6ULL to
792MHz, as with the industrial type. This is done by removing the
operating point at 900MHz and set the clock-frequency to 792000000.
[1] https://www.nxp.com/docs/en/application-note/AN5337.pdf
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This code prints the wrong variable in the warning message. It should
print "i" instead of "info->offset". On the first iteration "info" is
uninitialized leading to a crash and on subsequent iterations it prints
the previous offset instead of the current one.
Fixes: e0f74ed463 ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/11957c20-b178-4027-9b0a-e32e9591dd7c@moroto.mountain
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Convert AMD (Xilinx) sd-fec bindings to yaml format, so it can validate
dt-entries as well as any future additions to yaml.
Change in clocks is due to IP is itself configurable and
only the first two clocks are in all combinations. The last
6 clocks can be present in some of them. It means order is
not really fixed and any combination is possible.
Interrupt may or may not be present.
The documentation for sd-fec bindings is now YAML, so update the
MAINTAINERS file.
Update the link to the new yaml file in xilinx_sdfec.rst.
Signed-off-by: Dragan Cvetic <dragan.cvetic@amd.com>
Link: https://lore.kernel.org/r/20240131170650.530079-1-dragan.cvetic@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
The ACV BCM is voted using bitmasks. Add the proper mask for this
target.
Fixes: 9f19677284 ("interconnect: qcom: Add X1E80100 interconnect provider driver")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202014806.7876-3-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The ACV enable_mask is historically BIT(3), but it's BIT(0) on this
target. Fix it.
Fixes: c062bcab59 ("interconnect: qcom: introduce RPMh Network-On-Chip Interconnect on SM8650 SoC")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240202014806.7876-2-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws such as
the execution code accessing the tasklet item after the execution is
complete which can lead to subtle use-after-free in certain usage scenarios
and less-developed flush and cancel mechanisms.
This patch implements BH workqueues which share the same semantics and
features of regular workqueues but execute their work items in the softirq
context. As there is always only one BH execution context per CPU, none of
the concurrency management mechanisms applies and a BH workqueue can be
thought of as a convenience wrapper around softirq.
Except for the inability to sleep while executing and lack of max_active
adjustments, BH workqueues and work items should behave the same as regular
workqueues and work items.
Currently, the execution is hooked to tasklet[_hi]. However, the goal is to
convert all tasklet users over to BH workqueues. Once the conversion is
complete, tasklet can be removed and BH workqueues can directly take over
the tasklet softirqs.
system_bh[_highpri]_wq are added. As queue-wide flushing doesn't exist in
tasklet, all existing tasklet users should be able to use the system BH
workqueues without creating their own workqueues.
v3: - Add missing interrupt.h include.
v2: - Instead of using tasklets, hook directly into its softirq action
functions - tasklet[_hi]_action(). This is slightly cheaper and closer
to the eventual code structure we want to arrive at. Suggested by Lai.
- Lai also pointed out several places which need NULL worker->task
handling or can use clarification. Updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CAHk-=wjDW53w4-YcSmgKC5RruiRLHmJ1sXeYdp_ZgVoBw=5byA@mail.gmail.com
Tested-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Factor out init_cpu_worker_pool() from workqueue_init_early(). This is pure
reorganization in preparation of BH workqueue support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Allen Pais <allen.lkml@gmail.com>
These changes are in preparation of BH workqueue which will execute work
items from BH context.
- Update lock and RCU depth checks in process_one_work() so that it
remembers and checks against the starting depths and prints out the depth
changes.
- Factor out lockdep annotations in the flush paths into
touch_{wq|work}_lockdep_map(). The work->lockdep_map touching is moved
from __flush_work() to its callee - start_flush_work(). This brings it
closer to the wq counterpart and will allow testing the associated wq's
flags which will be needed to support BH workqueues. This is not expected
to cause any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Allen Pais <allen.lkml@gmail.com>
Now that the driver core can properly handle constant struct bus_type,
move the wq_subsys variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-and-reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
dd6c3c5441 ("workqueue: Move pwq_dec_nr_in_flight() to the end of work
item handling") relocated pwq_dec_nr_in_flight() after
set_work_pool_and_keep_pending(). However, the latter destroys information
contained in work->data that's needed by pwq_dec_nr_in_flight() including
the flush color. With flush color destroyed, flush_workqueue() can stall
easily when mixed with cancel_work*() usages.
This is easily triggered by running xfstests generic/001 test on xfs:
INFO: task umount:6305 blocked for more than 122 seconds.
...
task:umount state:D stack:13008 pid:6305 tgid:6305 ppid:6301 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x2f6/0xa20
schedule+0x36/0xb0
schedule_timeout+0x20b/0x280
wait_for_completion+0x8a/0x140
__flush_workqueue+0x11a/0x3b0
xfs_inodegc_flush+0x24/0xf0
xfs_unmountfs+0x14/0x180
xfs_fs_put_super+0x3d/0x90
generic_shutdown_super+0x7c/0x160
kill_block_super+0x1b/0x40
xfs_kill_sb+0x12/0x30
deactivate_locked_super+0x35/0x90
deactivate_super+0x42/0x50
cleanup_mnt+0x109/0x170
__cleanup_mnt+0x12/0x20
task_work_run+0x60/0x90
syscall_exit_to_user_mode+0x146/0x150
do_syscall_64+0x5d/0x110
entry_SYSCALL_64_after_hwframe+0x6c/0x74
Fix it by stashing work_data before calling set_work_pool_and_keep_pending()
and using the stashed value for pwq_dec_nr_in_flight().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Link: http://lkml.kernel.org/r/87o7cxeehy.fsf@debian-BULLSEYE-live-builder-AMD64
Fixes: dd6c3c5441 ("workqueue: Move pwq_dec_nr_in_flight() to the end of work item handling")
We can use a global dev_unreg_count counter instead
of a per netns one.
As a bonus we can factorize the changes done on it
for bulk device removals.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet_recv_error() is called without holding the socket lock.
IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning.
Fixes: f4713a3dfa ("net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the tun .get_channels functionality. This feature is necessary
for some tools, such as libxdp, which need to retrieve the queue count.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the following code style problem:
- WARNING: please, no spaces at the start of a line
- CHECK: Please use a blank line after
function/struct/union/enum declarations
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aligning the buffer to the L1 cache is not sufficient in some platforms
as they might have larger cacheline sizes for caches after L1 and thus,
we can't guarantee DMA safety.
That was the whole reason to introduce IIO_DMA_MINALIGN in [1]. Do the same
for st_sensors common buffer.
While at it, moved the odr_lock before buffer_data as we definitely
don't want any other data to share a cacheline with the buffer.
[1]: https://lore.kernel.org/linux-iio/20220508175712.647246-2-jic23@kernel.org/
Fixes: e031d5f558 ("iio:st_sensors: remove buffer allocation at each buffer enable")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131-dev_dma_safety_stm-v2-1-580c07fae51b@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently, coretemp driver supports only 128 cores per package.
This loses some core temperature information on systems that have more
than 128 cores per package.
[ 58.685033] coretemp coretemp.0: Adding Core 128 failed
[ 58.692009] coretemp coretemp.0: Adding Core 129 failed
...
Enlarge the limitation to 512 because there are platforms with more than
256 cores per package.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-4-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Before commit 7108b80a54 ("hwmon/coretemp: Handle large core ID
value"), there is a fixed mapping between
1. cpu_core_id
2. the index in pdata->core_data[] array
3. the sysfs attr name, aka "tempX_"
The later two always equal cpu_core_id + 2.
After the commit, pdata->core_data[] index is got from ida so that it
can handle sparse core ids and support more cores within a package.
However, the commit erroneously maps the sysfs attr name to
pdata->core_data[] index instead of cpu_core_id + 2.
As a result, the code is not aligned with the comments, and brings user
visible changes in hwmon sysfs on systems with sparse core id.
For example, before commit 7108b80a54 ("hwmon/coretemp: Handle large
core ID value"),
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon3/temp10_label:Core 8
/sys/class/hwmon/hwmon3/temp11_label:Core 9
after commit,
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon2/temp7_label:Core 8
/sys/class/hwmon/hwmon2/temp8_label:Core 9
Restore the previous behavior and rework the code, comments and variable
names to avoid future confusions.
Fixes: 7108b80a54 ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-3-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package.
Fixes: 7108b80a54 ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240202092144.71180-2-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
the ASPEED_PTCR_RESULT Register can only hold the result for a
single fan input. Adding a mutex to protect the register until the
reading is done.
Signed-off-by: Loic Prylli <lprylli@netflix.com>
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
Fixes: 2d7a548a3e ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Link: https://lore.kernel.org/r/121d888762a1232ef403cf35230ccf7b3887083a.1699007401.git.alexander.hansen@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When als_capture_sample() is called with usage ID
HID_USAGE_SENSOR_TIME_TIMESTAMP, return 0. The HID sensor core ignores
the return value for capture_sample() callback, so return value doesn't
make difference. But correct the return value to return success instead
of -EINVAL.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240204125617.2635574-1-srinivas.pandruvada@linux.intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler cannot perform VF register successfully as the register call
is received before netvsc_probe is finished. This is because we
register register_netdevice_notifier() very early( even before
vmbus_driver_register()).
To fix this, we try to register each such matching VF( if it is visible
as a netdevice) at the end of netvsc_probe.
Cc: stable@vger.kernel.org
Fixes: 8552085646 ("hv_netvsc: Fix race of register_netdevice_notifier and VF register")
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the RTL8126A found on Asus z790 Maximus Formula.
It was successfully tested w/o the firmware at 1000Mbps. Firmware file
has been provided by Realtek and submitted to linux-firmware.
2.5G and 5G modes are untested.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo points out that ifconfig is legacy and we should not use it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default lan8841's 1588 clock frequency is 125MHz. But when adjusting
the frequency, it is using the 1PPM format of the lan8814. Which is the
wrong format as lan8814 has a 1588 clock frequency of 250MHz. So then
for each 1PPM adjustment would adjust less than expected.
Therefore fix this by using the correct 1PPM format for lan8841.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
For ARCH=arm64, virt/lib/Kconfig is sourced twice,
from arch/arm64/kvm/Kconfig and from drivers/vfio/Kconfig.
There is no good reason to parse virt/lib/Kconfig twice.
Commit 2412405b31 ("KVM: arm/arm64: register irq bypass consumer
on ARM/ARM64") should not have added this 'source' directive.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240204074305.31492-1-masahiroy@kernel.org
The suspend callback disables the periph clock when the PWM is enabled
and resume reenables this clock if the PWM was disabled before. Judging
from the code comment it's suspend that is wrong here. Fix accordingly.
Fixes: f9bb9da7c0 ("pwm: atmel-hlcdc: Implement the suspend/resume hooks")
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/b51ea92b0a45eff3dc83b08adefd43d930df996c.1706269232.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The default status is okay, so it is definitly not necessary to set
it on a newly added node.
Fixes: d1b8b36a2c ("arm64: dts: rockchip: add Theobroma Jaguar SBC")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobrona-systems.com>
Link: https://lore.kernel.org/r/20240129114851.2019861-1-heiko@sntech.de
The binding doesn't define interrupts and adding such a definition was
refused because it's unclear how they should ever be used and the
relevant registers are outside the PWM range. So drop them fixing
several dtbs_check warnings like:
arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb: pwm@10280030: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240129113205.2453029-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This one is not needed since commit 954afc5a8f ("RDMA/rxe:
Use members of generic struct in rxe_mr").
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20240202124144.16033-1-guoqing.jiang@linux.dev
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This includes support for both the v0.1 units that were sent to developers and
the v2.0 units from production.
v1.0 is not included as no units are known to exist.
Working/Tested:
- SDMMC
- UART
- Buttons
- Charging/Battery/PMIC
- Audio
- USB
- Display
- SPI NOR Flash
Signed-off-by: Alexander Warnecke <awarnecke002@hotmail.com>
Signed-off-by: Manuel Traut <manut@mecka.net>
Tested-By: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Ondrej Jirman <megi@xff.cz>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240127-pinetab2-v4-4-37aab1c39194@mecka.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 4 lane pcie30 phy is shared by pcie3x4 and pcie3x2, so
the num-lanes of pcie3x4 should be 2.
Fixes: 791c154c39 ("arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB")
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20240201121106.1471301-4-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to the schematic, USB20 HOST0 and HOST1 each have their own
independent power supply, but these two regulators controlled by a
same GPIO, so give it a more appropriate name.
Fixes: 791c154c39 ("arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB")
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240201121106.1471301-3-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Follow others rk3588 based boards, and u-boot only use mmc0/1
as mmc boot targets, so aliase sdmmc as mmc1.
Fixes: 791c154c39 ("arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB")
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240201121106.1471301-2-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Follow others rk3588 based boards, and u-boot only use mmc0/1
as mmc boot targets, so aliase sdmmc as mmc1.
Fixes: 3f5d336d64 ("arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B")
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240201121106.1471301-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
These can only be exported if cfg80211's kunit is enabled,
since they're otherwise static. kunit itself can be enabled
even if cfg80211's kunit isn't. Fix that by using the right
macro.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402040534.6AEKtZ7Y-lkp@intel.com/
Fixes: 45d43937a4 ("wifi: cfg80211: add a kunit test for 6 GHz colocated AP parsing")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
