Add the Goodix GT927 touchscreen to the Anbernic RG-ARC D.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Trooper_Max <troopermax@gmail.com>
Link: https://lore.kernel.org/r/20240201150620.886786-1-macroalpha82@gmail.com
[renamed node to generic touchscreen@14]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
dmi_get_system_info() will statically return NULL when the
kernel is compiled without CONFIG_DMI, leading to compiler
warnings. Fix that by printing "<unknown>" in that case.
Fixes: c3f40c3e02 ("iwlwifi: mvm: add US/CA to TAS block list if OEM isn't allowed")
Fixes: 9457077df4 ("wifi: iwlwifi: mvm: Add debugfs to get TAS status")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the system is compiled without CONFIG_DMI, the function
here statically returns NULL, leading to a compiler warning.
Catch that and print "<unknown>" in that case.
While at it, fix some indentation in the function.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402030641.zUTuACYV-lkp@intel.com/
Fixes: 09059c6764 ("wifi: iwlwifi: prepare for reading PPAG table from UEFI")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The user of this function passes a pointer to a value that
doesn't exist when compiled w/o CONFIG_ACPI. Since we don't
need the value then, make the non-ACPI version a macro to
allow it to still build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402031454.syX4cSGN-lkp@intel.com/
Fixes: c4c9545477 ("wifi: iwlwifi: implement WPFC ACPI table loading")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Upon rare occasions, KASAN reports a use-after-free Write
in srpt_refresh_port().
This seems to be because an event handler is registered before the
srpt device is fully setup and a race condition upon error may leave a
partially setup event handler in place.
Instead, only register the event handler after srpt device initialization
is complete.
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Link: https://lore.kernel.org/r/20240202091549.991784-2-william.kucharski@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove the unneeded assignment of the qp_num which is already
set in irdma_create_qp().
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Link: https://lore.kernel.org/r/20240131233953.400483-1-sindhu.devale@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add IRDMA_AE_LLP_TOO_MANY_RNRS to the list of AE's processed as an
abnormal asyncronous event.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@gmail.com>
Link: https://lore.kernel.org/r/20240131233849.400285-5-sindhu.devale@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The CQ shadow read threshold is currently not set for GEN 2. This could
cause an invalid CQ overflow condition, so remove the GEN check that
exclused GEN 1.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Link: https://lore.kernel.org/r/20240131233849.400285-4-sindhu.devale@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The SKUs, and associated SSIDs, are no longer going to include the
CS35L41. They may come back, but will need a different quirk.
Fixes: aa8e3ef4fe ("ALSA: hda/realtek: Add quirks for various HP ENVY models")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240202170842.321818-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
and extent handling code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmW/G4YACgkQ8vlZVpUN
gaPTpwf/c/Fk27GV8ge9PQtR6gmir/lyw2qkvK3Z+12aEsblZRmyvElyZWjAuNQG
bciQyltabIPOA4XxfsZOrdgYI42n0rTTFG7bmI0lr+BJM/HRw0tGGMN91FZla0FP
EXv/AiHKCqlT5OFZbD+8n1TzfdOgWotjug1VLteXve3YKjkDgt5IQm/0Gx9hKBld
IR8SrQlD/rYe+VPvaHz5G4u09Ne5pUE5fDj3xE23wxfU5cloVzuVRCSOGWUCTnCW
T0v6sHeKrmiLC8tIOZkBjer4nXC0MOu0p5+geAjwOArc9VJ1Lh2eAkH+GgDOVprx
ahdl2qmbIbacBYECIeQ/+1i78+O1yw==
=CmYr
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
and extent handling code"
* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
ext4: make ext4_map_blocks() distinguish delalloc only extent
ext4: add a hole extent entry in cache after punch
ext4: correct the hole length returned by ext4_map_blocks()
ext4: convert to exclusive lock while inserting delalloc extents
ext4: refactor ext4_da_map_blocks()
ext4: remove 'needed' in trace_ext4_discard_preallocations
ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
ext4: remove unused return value of ext4_mb_release_group_pa
ext4: remove unused return value of ext4_mb_release_inode_pa
ext4: remove unused return value of ext4_mb_release
ext4: remove unused ext4_allocation_context::ac_groups_considered
ext4: remove unneeded return value of ext4_mb_release_context
ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
ext4: remove unused return value of __mb_check_buddy
ext4: mark the group block bitmap as corrupted before reporting an error
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
...
-----BEGIN PGP SIGNATURE-----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=q5wf
-----END PGP SIGNATURE-----
Merge tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Five smb3 client fixes, mostly multichannel related:
- four multichannel fixes including fix for channel allocation when
multiple inactive channels, fix for unneeded race in channel
deallocation, correct redundant channel scaling, and redundant
multichannel disabling scenarios
- add warning if max compound requests reached"
* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: increase number of PDUs allowed in a compound request
cifs: failure to add channel on iface should bump up weight
cifs: do not search for channel if server is terminating
cifs: avoid redundant calls to disable multichannel
cifs: make sure that channel scaling is done only once
* Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
attribute fork.
* Remove conditional compilation of realtime geometry validator functions to
prevent confusing error messages from being printed on the console during the
mount operation.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZbo7FAAKCRAH7y4RirJu
9Cn+APsFEbHA8YQpCSxGDM+Xelez9X7wroi6QkyOxRP6Lqq6ogD6A96uuV86TxkQ
Hkse9IAKkFoLmyzohT9u7Bv46M/X4w8=
=Ez8Z
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
attribute fork
- Remove conditional compilation of realtime geometry validator
functions to prevent confusing error messages from being printed on
the console during the mount operation
* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove conditional building of rt geometry validator functions
xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZb6yeA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yktLwCgwz0RakMt9dqjbip/1NJAXaRlOAgAoLWeyBLt
qBVv8Y50No3dxCuKbsJZ
=fqm2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: signal epoll threads of self-work
misc: open-dice: Fix spurious lockdep warning
misc: fastrpc: Mark all sessions as invalid in cb_remove
Here are some small tty and serial driver fixes for 6.8-rc3 that resolve
a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZb6zjg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk0HgCfZAR7KNiPmOispGfysLhMcOiTPVsAnjISgM0C
9AotHvA7yei0VTxzCm1N
=HchR
-----END PGP SIGNATURE-----
Merge tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZb60Zg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymczwCcCwsgyz86WT5ncgcMTcCFJ0RHEFUAoMLTb7PO
Ilvy8z+Wn2I2QEtnDLqT
=H8kH
-----END PGP SIGNATURE-----
Merge tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
usb: typec: tcpm: fix the PD disabled case
usb: ucsi_acpi: Quirk to ack a connector change ack cmd
usb: ucsi_acpi: Fix command completion handling
usb: ucsi: Add missing ppm_lock
usb: ulpi: Fix debugfs directory leak
Revert "usb: typec: tcpm: fix cc role at port reset"
usb: gadget: pch_udc: fix an Excess kernel-doc warning
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
usb: chipidea: core: handle power lost in workqueue
usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
usb: dwc3: pci: add support for the Intel Arrow Lake-H
usb: core: Prevent null pointer dereference in update_port_device_state
xhci: handle isoc Babble and Buffer Overrun events properly
xhci: process isoc TD properly when there was a transaction error mid TD.
xhci: fix off by one check when adding a secondary interrupter.
xhci: fix possible null pointer dereference at secondary interrupter removal
...
changes
-----BEGIN PGP SIGNATURE-----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=d1Hg
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixlet from Wolfram Sang:
"MAINTAINERS update to point people to the new tree for i2c host driver
changes"
* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Update i2c host drivers repository
Core:
- return of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks
-----BEGIN PGP SIGNATURE-----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=6kH5
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Core:
- fix return value of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks"
* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: add missing kernel-doc style description
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
dmaengine: fsl-qdma: Remove a useless devm_kfree()
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
dmaengine: ti: k3-udma: Report short packet errors
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
dmaengine: at_hdmac: fix some kernel-doc warnings
i2c host and muxes related patches will be collected.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZbpiwhYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uZHoBAN2LbvYjiEXogXDU4thOlT/yCghY
k7vmngeRfsVRNmlpAQCH642B0Szx0ibFYlDD6uUjzy075RNAWOzdybo/ZMmlDw==
=mEC/
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Just a maintenance patch that updates the repository where the
i2c host and muxes related patches will be collected.
Commit b3eaa47395 ("arm64: dts: qcom: sm6115: Hook up interconnects")
did indeed hook up interconnects, but apparently not interconnect-names
on I2C1, making it return -EINVAL due to an error getting icc paths..
Fix it!
Fixes: b3eaa47395 ("arm64: dts: qcom: sm6115: Hook up interconnects")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240202-topic-6115_i2c-v1-1-ecfe06f5f2ef@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
CPER events don't have UUIDs. Therefore UUIDs were removed from the
records passed to trace events and replaced with hard coded values.
As pointed out by Jonathan, the new defines for the UUIDs present a more
efficient way to assign UUID in trace records.[1]
Replace memcpy's with the use of static data.
[1] https://lore.kernel.org/all/20240108132325.00000e9c@Huawei.com/
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Jonathan reports that CXL CPER events dump an extra generic error
message.
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
{1}[Hardware Error]: event severity: recoverable
{1}[Hardware Error]: Error 0, type: recoverable
{1}[Hardware Error]: section type: unknown, fbcd0a77-c260-417f-85a9-088b1621eba6
{1}[Hardware Error]: section length: 0x90
{1}[Hardware Error]: 00000000: 00000090 00000007 00000000 0d938086 ................
{1}[Hardware Error]: 00000010: 00100000 00000000 00040000 00000000 ................
...
CXL events were rerouted though the CXL subsystem for additional
processing. However, when that work was done it was missed that
cper_estatus_print_section() continued with a generic error message
which is confusing.
Teach CPER print code to ignore printing details of some section types.
Assign the CXL event GUIDs to this set to prevent confusing unknown
prints.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The AT91SAM9G25-based GARDENA smart Gateway uses USART3 (ttyS1) to
communicate (over PPP, at 115200 baud) with the radio module.
We have been experiencing packet loss and seeing errors on the ppp0
interface. Enabling DMA for the serial interface resolves the issues.
Co-developed-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
Signed-off-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240102161839.702625-3-ezra.buehler@husqvarna.com
[claudiu.beznea: s/Co-Developed-by/Co-developed-by to make checkpatch.pl
happy, s/at91/microchip in commit title]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The UART controller does not seem to be fast enough to receive data (at
115200 baud) without dropping bytes when DMA is disabled.
This has often been noticed when pasting SSH keys into the serial
console (ttyS0). Only after multiple tries, the long strings would be
successfully transferred without missing characters.
Co-developed-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
Signed-off-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240102161839.702625-2-ezra.buehler@husqvarna.com
[claudiu.beznea: s/Co-Developed-by/Co-developed-by to make checkpatch.pl
happy, s/at91/microchip in commit title]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add the TPM device found on the GW71xx revision E PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the TPM device found on the GW71xx revision E PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW71xx does not have a gpio controlled vbus regulator but it does
require some pinctrl. Remove the regulator and move the valid pinctrl
into the usbotg1 node.
Fixes: bd306fdb4e ("arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the TPM device found on the GW7901 revision D PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW7901 has GPIO's to configure the direction of its isolated
digital I/O signals. Add the GPIO pinmux and line names.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UART4 is used as CM7 coprocessor debug UART and may not be accessible from
Linux in case it is protected by RDC. The RDC protection is set up by the
platform firmware. UART4 is not used on this platform by Linux. Disable
UART4 by default to prevent boot hangs, which occur when the RDC protection
is in place.
Fixes: 562d222f23 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type ("cpu_atom", "cpu_core")
needs to be used as a prefix to be considered on a metric formula, detected via one
of the 'perf test' entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by initializing
the sample ID flag, which is done by 'perf record', so this fix only the tests,
the common case isn't affected.
- Make 'perf list' respect debug settings (-v) to fix its 'perf test' entry.
- Fix 'perf script' test when python support isn't enabled.
- Special case 'perf script' tests on s390, where only DWARF call graphs are
supported and only on software events.
- Make 'perf daemon' signal test less racy.
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers -Walloc-size.
- Fix calloc() argument order to address error introduced in gcc-14.
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to fail with older versions.
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE.
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING.
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB.
- unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers.
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes.
- x86's mem{cpy,set}_64.S used in 'perf bench'.
- Also, without tooling effects: asm-generic/unaligned.h, mount.h, fcntl.h, kvm headers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZbwOmQAKCRCyPKLppCJ+
J/TkAP92DD1ZKmc9WzlJ8vpbz+nXwvMIDTRSSBnvYPiDNSL6xAEAkX92qWUQ35RS
faz2v593RZ4VfthcAEl5P6FXEhHhfAc=
=pDc1
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
("cpu_atom", "cpu_core") needs to be used as a prefix to be
considered on a metric formula, detected via one of the 'perf test'
entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by
initializing the sample ID flag, which is done by 'perf record', so
this fix affects only the tests, the common case isn't affected
- Make 'perf list' respect debug settings (-v) to fix its 'perf test'
entry
- Fix 'perf script' test when python support isn't enabled
- Special case 'perf script' tests on s390, where only DWARF call
graphs are supported and only on software events
- Make 'perf daemon' signal test less racy
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers
-Walloc-size
- Fix calloc() argument order to address error introduced in gcc-14
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to
fail with older versions
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB
- unistd.h to pick {list,stat}mount,
lsm_{[gs]et_self_attr,list_modules} syscall numbers
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes
- x86's mem{cpy,set}_64.S used in 'perf bench'
- Also, without tooling effects: asm-generic/unaligned.h, mount.h,
fcntl.h, kvm headers"
* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
tools include UAPI: Sync linux/mount.h copy with the kernel sources
perf evlist: Fix evlist__new_default() for > 1 core PMU
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
perf vendor events intel: Alderlake/sapphirerapids metric fixes
tools headers UAPI: Sync kvm headers with the kernel sources
perf tools: Fix calloc() arguments to address error introduced in gcc-14
perf top: Remove needless malloc(0) call that triggers -Walloc-size
perf build: Make minimal shellcheck version to v0.6.0
tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
perf test shell daemon: Make signal test less racy
perf test shell script: Fix test for python being disabled
perf test: Workaround debug output in list test
perf list: Add output file option
perf list: Switch error message to pr_err() to respect debug settings (-v)
perf test: Fix 'perf script' tests on s390
tools headers UAPI: Sync linux/fcntl.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
...
Christian Marangi says:
====================
net: phy: qcom: qca808x: fixup qca808x LED
This is a bit embarassing and totally my fault so sorry for that!
While reworking the patch to phy_modify API, it was done a logic
error and made the brightness_set function broken. It wasn't
notice in last revisions test as the testing method was to verify
if hw control was correctly working.
Noticing this problem also made me notice an additional problem
with the polarity.
The introduced patch made the polarity configurable but I forgot
to add the required code to enable Active High by default.
(the PHY sets active low by default)
This wasn't notice with hw control testing as the LED blink on
traffic and polarity problem are not notice.
It might be worth discussing if needed a change in implementation
where the polarity function is always called but I think it's
better this way where specific PHY apply fixup with the help
of priv struct and on the config_init phase.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
qca808x PHY provide support for the led_polarity_set OP to configure
and apply the active-low property but on PHY reset, the Active High bit
is not set resulting in the LED driven as active-low.
To fix this, check if active-low is not set in DT and enable Active High
polarity by default to restore correct funcionality of the LED.
Fixes: 7196062b64 ("net: phy: at803x: add LED support for qca808x")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In switching to using phy_modify_mmd and a more short version of the
LED ON/OFF condition in later revision, it was made a logic error where
value ? QCA808X_LED_FORCE_ON : QCA808X_LED_FORCE_OFF is always true as
value is always OR with QCA808X_LED_FORCE_EN due to missing ()
resulting in the testing condition being QCA808X_LED_FORCE_EN | value.
Add the () to apply the correct condition and restore correct
functionality of the brightness ON/OFF.
Fixes: 7196062b64 ("net: phy: at803x: add LED support for qca808x")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be
freed to prevent memleak.
Fixes: c9c12d339d ("octeontx2-pf: Add support for PTP clock")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When alloc_scq fails, card->vcs[0] (i.e. vc) should be freed. Otherwise,
in the following call chain:
idt77252_init_one
|-> idt77252_dev_open
|-> open_card_ubr0
|-> alloc_scq [failed]
|-> deinit_card
|-> vfree(card->vcs);
card->vcs is freed and card->vcs[0] is leaked.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the ICMPv6 error is built from a non-linear skb we get the following
splat,
BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
Read of size 4 at addr ffff88811d402c80 by task netperf/820
CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
...
kasan_report+0xd8/0x110
do_csum+0x220/0x240
csum_partial+0xc/0x20
skb_tunnel_check_pmtu+0xeb9/0x3280
vxlan_xmit_one+0x14c2/0x4080
vxlan_xmit+0xf61/0x5c00
dev_hard_start_xmit+0xfb/0x510
__dev_queue_xmit+0x7cd/0x32a0
br_dev_queue_push_xmit+0x39d/0x6a0
Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is
done by xdp_convert_buff_to_frame(). The memory type of the resulting
xdp_frame depends on the memory type of the xdp_buff. For page pool
based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces
xdp_frame with memory type MEM_TYPE_PAGE_ORDER0.
tsnep_xdp_xmit_back() is not prepared for that and uses always the page
pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings
and the transmission of undefined data.
Improve tsnep_xdp_xmit_back() to use the generic buffer type
TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX.
Fixes: 3fc2333933 ("tsnep: Add XDP socket zero-copy RX support")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
First release of GuC firmware for LNL is now available, so start
using it.
v2: Actually use xe directory. Doh! (review feedback from Lucas)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202200017.2133438-6-John.C.Harrison@Intel.com
Patch level releases can be just as important as major level releases
if they fix a critical bug. So include the patch version in the
expectation check so the user is properly informed if they need to
update.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202200017.2133438-4-John.C.Harrison@Intel.com
intel_power_domains_init is called twice in xe_device_probe:
1) intel_power_domains_init()
xe_display_init_nommio()
xe_device_probe()
2) intel_power_domains_init()
intel_display_driver_probe_noirq()
xe_display_init_noirq()
xe_device_probe()
It needs remove one to avoid power_domains->power_wells double malloc.
unreferenced object 0xffff88811150ee00 (size 512):
comm "systemd-udevd", pid 506, jiffies 4294674198 (age 3605.560s)
hex dump (first 32 bytes):
10 b4 9d a0 ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8134b901>] __kmem_cache_alloc_node+0x1c1/0x2b0
[<ffffffff812c98b2>] __kmalloc+0x52/0x150
[<ffffffffa08b0033>] __set_power_wells+0xc3/0x360 [xe]
[<ffffffffa08562fc>] xe_display_init_nommio+0x4c/0x70 [xe]
[<ffffffffa07f0d1c>] xe_device_probe+0x3c/0x5a0 [xe]
[<ffffffffa082e48f>] xe_pci_probe+0x33f/0x5a0 [xe]
[<ffffffff817f2187>] local_pci_probe+0x47/0xa0
[<ffffffff817f3db3>] pci_device_probe+0xc3/0x1f0
[<ffffffff8192f2a2>] really_probe+0x1a2/0x410
[<ffffffff8192f598>] __driver_probe_device+0x78/0x160
[<ffffffff8192f6ae>] driver_probe_device+0x1e/0x90
[<ffffffff8192f92a>] __driver_attach+0xda/0x1d0
[<ffffffff8192c95c>] bus_for_each_dev+0x7c/0xd0
[<ffffffff8192e159>] bus_add_driver+0x119/0x220
[<ffffffff81930d00>] driver_register+0x60/0x120
[<ffffffffa05e50a0>] 0xffffffffa05e50a0
The call to intel_power_domains_cleanup() needs to stay where it is for
now. The main issue is that while the init is called by the display
side, shared by i915 and xe, the cleanup is called by a non-shared code
path. Fixing that will be done as a separate commit.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Xiaoming Wang <xiaoming.wang@intel.com>
[ reword commit message and explain why the fini needs to stay
where it is ]
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202215658.561298-1-lucas.demarchi@intel.com
Jakub Kicinski says:
====================
tools: ynl: auto-gen for all genetlink families
The code gen has caught up with all features required in genetlink
families in Linux 6.8 already. We have also stopped committing auto-
-generated user space code to the tree. Instead of listing all the
families in the Makefile search the spec directory, and generate
code for everything that's not legacy netlink.
====================
Link: https://lore.kernel.org/r/20240202004926.447803-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of listing the genetlink families that we want to codegen
for, always codegen for everyone. We can add an opt-out later but
it seems like most families are not causing any issues, and yet
folks forget to add them to the Makefile.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240202004926.447803-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
