Replace g with q.
Helpful when grepping thru source code or logs for
"request" keyword.
Fixes: f65444187a ("serial: New serial driver MAX310X")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use preferred spi_get_device_match_data() instead of
device_get_match_data() and spi_get_device_id() to get the driver match
data.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use preferred i2c_get_match_data() instead of device_get_match_data()
to get the driver match data.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows to instantiate a max14830 I2C device from userspace.
Helpful when testing driver with i2c-stub.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When trying to instantiate a max14830 device from userspace:
echo max14830 0x60 > /sys/bus/i2c/devices/i2c-2/new_device
we get the following error:
Unable to handle kernel NULL pointer dereference at virtual address...
...
Call trace:
max310x_i2c_probe+0x48/0x170 [max310x]
i2c_device_probe+0x150/0x2a0
...
Add check for validity of devtype to prevent the error, and abort probe
with a meaningful error message.
Fixes: 2e1f2d9a9b ("serial: max310x: implement I2C support")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since STM32MP25, FIFO size could vary regarding the STM32MPxx version.
So we get this size from "hwcfgr1" register and compute threshold values
corresponding to the ratio given by reference manual.
As STM32MP1x, STM32MP25 and STM32H7 share the same compatible and STM32H7
doesn't have a register to get FIFO size, we force FIFO size to 16 in case
of zero read from hwcfgr1 register.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240112095300.2004878-5-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USART has registers above 0xff offset, so extend variable type to u16.
And change UNDEF_REG to 0xffff.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240112095300.2004878-4-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM32MP25x got 9 instances of U(S)ART. So extend STM32_MAX_PORTS to 9, in
order to handle all instances.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240112095300.2004878-3-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case of high USART input clock and low baud rate, BRR value
is not enough to get correct baud rate. So here we use USART prescaler to
divide USART input clock to get the correct baud rate.
PRESC register is only available since stm32h7.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240112095300.2004878-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The config HW_CONSOLE is always identical to the config VT and is not
visible in the kernel's build menuconfig. So, CONFIG_HW_CONSOLE is
redundant.
Replace all references to CONFIG_HW_CONSOLE with CONFIG_VT and remove
CONFIG_HW_CONSOLE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240108134102.601-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During an SSR(Sub-System Restart) process, the remoteproc driver will
try to read the crash reason from SMEM. The qcom_smem_get() backing such
operations does however take the hwspinlock (tcsr mutex), which might be
held by the dying remoteproc.
The associated timeout on the hwspin_lock_timeout_irqsave() would take
care of the system not hanging forever, but the get operation will fail,
unnecessarily delaying the process for the 'HWSPINLOCK_TIMEOUT' duration
(currently is '1s'), and finally resulting in failure to get crash
information from SMEM.
This timeout can be avoided by removing the hwspinlock in the
qcom_smem_get routine. SMEM ensures that the allocated item will only be
visible after the new item is safe to use by following a specific order
of updates.
In the private partition case, qcom_smem_get_private() will use
'offset_free_uncached' as a loop boundary when looking for existing
allocated items. The corresponding allocation will only update
offset_free_uncached once the item is fully initialized.
hdr->canary = SMEM_PRIVATE_CANARY;
hdr->item = cpu_to_le16(item);
hdr->size = cpu_to_le32(ALIGN(size, 8));
hdr->padding_data = cpu_to_le16(le32_to_cpu(hdr->size) - size);
hdr->padding_hdr = 0;
wmb();
le32_add_cpu(&phdr->offset_free_uncached, alloc_size);
The global partition is similar but uses the "entry->allocated" variable
to ensure the item is not visible to qcom_smem_get_global().
Signed-off-by: Tao Zhang <quic_taozhan@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240102022512.999635-1-quic_taozhan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As of commit d7402513c9 ("arm64: smp: IPI_CPU_STOP and
IPI_CPU_CRASH_STOP should try for NMI"), if we've got pseudo-NMI
enabled then we'll use it to stop CPUs at panic time. This is nice,
but it does mean that there's a pretty good chance that we'll end up
stopping a CPU while it holds the port lock for the console
UART. Specifically, I see a CPU get stopped while holding the port
lock nearly 100% of the time on my sc7180-trogdor based Chromebook by
enabling the "buddy" hardlockup detector and then doing:
sysctl -w kernel.hardlockup_all_cpu_backtrace=1
sysctl -w kernel.hardlockup_panic=1
echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
UART drivers are _supposed_ to handle this case OK and this is why
UART drivers check "oops_in_progress" and only do a "trylock" in that
case. However, before we enabled pseudo-NMI to stop CPUs it wasn't a
very well-tested situation.
Now that we're testing the situation a lot, it can be seen that the
Qualcomm GENI UART driver is pretty broken. Specifically, when I run
my test case and look at the console output I just see a bunch of
garbled output like:
[ 201.069084] NMI backtrace[ 201.069084] NM[ 201.069087] CPU: 6
PID: 10296 Comm: dnsproxyd Not tainted 6.7.0-06265-gb13e8c0ede12
#1 01112b9f14923cbd0b[ 201.069090] Hardware name: Google Lazor
([ 201.069092] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DI[
201.069095] pc : smp_call_function_man[ 201.069099]
That's obviously not so great. This happens because each call to the
console driver exits after the data has been written to the FIFO but
before it's actually been flushed out of the serial port. When we have
multiple calls into the console one after the other then (if we can't
get the lock) each call tells the UART to throw away any data in the
FIFO that hadn't been transferred yet.
I've posted up a patch to change the arm64 core to avoid this
situation most of the time [1] much like x86 seems to do, but even if
that patch lands the GENI driver should still be fixed.
>From testing, it appears that we can just delete the cancel/abort in
the case where we weren't able to get the UART lock and the output
looks good. It makes sense that we'd be able to do this since that
means we'll just call into __qcom_geni_serial_console_write() and
__qcom_geni_serial_console_write() looks much like
qcom_geni_serial_poll_put_char() but with a loop. However, it seems
safest to poll the FIFO and make sure it's empty before our
transfer. This should reliably make sure that we're not
interrupting/clobbering any existing transfers.
As part of this change, we'll also avoid re-setting up a TX at the end
of the console write function if we weren't able to get the lock,
since accessing "port->tx_remaining" without the lock is not
safe. This is only needed to re-start userspace initiated transfers.
[1] https://lore.kernel.org/r/20231207170251.1.Id4817adef610302554b8aa42b090d57270dc119c@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240112150307.2.Idb1553d1d22123c377f31eacb4486432f6c9ac8d@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the docs I have, bit 21 of the status register is
asserted when the FIFO is _not_ empty. Add the definition.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240112150307.1.I7dc0993c1e758a1efedd651e7e1670deb1b430fb@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If CONFIG_SERIAL_8250_HP300=y and CONFIG_SERIAL_8250_CONSOLE=y (e.g.
m68k/allyesconfig):
drivers/tty/serial/8250/8250_hp300.c:91:12: error: no previous prototype for ‘hp300_setup_serial_console’ [-Werror=missing-prototypes]
91 | int __init hp300_setup_serial_console(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by moving the existing prototype in arch/m68k/hp300/config.c to
<linux/serial_8250.h>, so it is visible to both caller and implementor.
While at it, provide a dummy in case CONFIG_SERIAL_8250_CONSOLE is not
enabled, to reduce #ifdef clutter in the caller.
Exposed by commit 0fcb70851f ("Makefile.extrawarn: turn on
missing-prototypes globally").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/c17469f8e47b2ef49234a85a7a14882ddf374e41.1704892597.git.geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vc_translate_unicode() and vc_sanitize_unicode() parse input to the
UTF-8-enabled console, marking invalid byte sequences and producing Unicode
codepoints. The current algorithm follows ancient Unicode and may accept
invalid byte sequences, pass on non-existent codepoints and reject valid
sequences.
The patch restores the functions' compliance with modern Unicode (v15.1 [1]
+ many previous versions) as well as RFC 3629 [2].
1. Codepoint space is limited to 0x10FFFF.
2. "Noncharacters", such as U+FFFE, U+FFFF, are no longer invalid in
Unicode and will be accepted. Another option was to complete the set of
noncharacters (used to be just those two, now there's more) and preserve
the rejection step. This is indeed what Unicode suggests ([1] chap.
23.7) (not requires), but most codepoints are !iswprint(), so selecting
just the noncharacters seemed arbitrary and futile (and unnecessary).
This is not a security patch. I'm not aware of any present security
implications of the old code.
[1] https://www.unicode.org/versions/Unicode15.1.0
[2] https://datatracker.ietf.org/doc/html/rfc3629
Signed-off-by: Roman Žilka <roman.zilka@gmail.com>
Link: https://lore.kernel.org/r/598ab459-6ba9-4a17-b4a1-08f26a356fc0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add "regulator" to the node names of the fixed regulators, and drop the
"_rear" part of the camera node name since it is not part of the class
of the device (which is simply "camera").
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230922-apq8016-sbc-camera-dtso-v1-1-ce9451895ca1@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In linflex_config_port() the member variable type will be
assigned again. Remove redundant uart type assignment from
linflex_probe().
Signed-off-by: Lizhe <sensor1010@163.com>
Link: https://lore.kernel.org/r/20240112133923.190852-1-sensor1010@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver reads only one clock frequency, and the schema does not
allow more than one frequency here.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230812183811.375671-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename the SPI-NOR node to flash@0, remove #address-cells and #size-cells
as they should be under the partitions subnode and use the generic
jedec,spi-nor compatible.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811210142.403160-2-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All of the nodes under soc already have existing labels so use those
instead.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811210142.403160-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts. Not
tested on hardware.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-6-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts. Only
boot tested on hardware.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-5-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts. Only
boot tested on hardware.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-4-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts. Not
tested on hardware.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-3-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts. Not
tested on hardware.
PCIe0 was done already in commit f2819650aa ("arm64: dts: qcom:
sm8250: provide additional MSI interrupts").
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-2-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts. Not
tested on hardware.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240126-b4-dt-bindings-pci-qcom-split-dts-v2-1-0bb067f73adb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the rmtfs-mem node which was part of one of the "unknown" memory
reservation. Split that one, make sure the reserved-memory in total
still covers the same space.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240121-memul-rmtfs-v1-1-e9da29b1f856@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since the commit 93f3350c46 ("RS485: fix inconsistencies in the
meaning of some variables"), the definition for bit 3 has been removed.
But with the switch to bit shift macros in commit 76ac8e2985 ("tty:
serial: Cleanup the bit shift with macro"), this gap wasn't preserved.
To avoid a break in user/kernel api of the system skip bit 3 again and
add a placeholder comment.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Fixes: 76ac8e2985 ("tty: serial: Cleanup the bit shift with macro")
Fixes: 6056f20f27 ("tty: serial: Add RS422 flag to struct serial_rs485")
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Crescent CY Hsieh <crescentcy.hsieh@moxa.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Cc: Hugo Villeneuve <hugo@hugovil.com>
Link: https://lore.kernel.org/r/20240119113516.2944-1-cniedermaier@dh-electronics.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
receive_buf() is called from ttyport_receive_buf() that expects values
">= 0" from serdev_controller_receive_buf(), change its return type from
ssize_t to size_t.
The need for this clean-up was noticed while fixing a warning, see
commit 94d0539425 ("Bluetooth: btnxpuart: fix recv_buf() return value").
Changing the callback prototype to return an unsigned seems the best way
to document the API and ensure that is properly used.
GNSS drivers implementation of serdev receive_buf() callback return
directly the return value of gnss_insert_raw(). gnss_insert_raw()
returns a signed int, however this is not an issue since the value
returned is always positive, because of the kfifo_in() implementation.
gnss_insert_raw() could be changed to return also an unsigned, however
this is not implemented here as request by the GNSS maintainer Johan
Hovold.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com> # for platform/surface
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240122180551.34429-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now, that the console kernel-doc is in better shape, include it in the
tty/ docs.
It's not supernice, but it is what it is. At least for the beginning.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-48-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
selection.c and vt.c still uses tabs in the kernel-doc. This misrenders the
functions in the output -- sphinx misinterprets the description. So
remove these tabs, incl. those around dashes.
'enum' keyword is needed before enum names. Fix that.
Superfluous \n after the comments are also removed. They are not
completely faulty, but this unifies all the kernel-doc in the files.
Finally fix up the cross references.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-47-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are still members of struct consw which are not documented yet.
Fix that up, so we can generate kernel-doc for that struct.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-46-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the previous patch, nobody sets that hook. So drop it completely.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-44-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Again, fbcon_getxy() is the same as the default implementation since the
softscroll removal in commit 50145474f6 (fbcon: remove soft scrollback
code). Drop that.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-43-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* parameter offset: it is expected to be non-negative, so switch to
unsigned
* return type: switch from ushort to explicit u16. This is expected on
most places. And fix the remaining two places too.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-42-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the previous patch, nobody sets that hook. So drop it completely.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-41-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fbcon_screen_pos() performs the same as the default implementation. The
only difference in the default implementation is that is considers both
vc->vc_origin and vc->vc_visible_origin. But given fbcon's softscroll
code was already removed in commit 50145474f6 (fbcon: remove soft
scrollback code), both are always the same.
So remove fbcon_screen_pos() too.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-40-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of consw::con_set_origin() is only true/false, meaining
if vc->vc_origin is set to vc->vc_screenbuf or not.
So switch the type and returned values accordingly.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-39-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both the mode_switch parameter and the return value (a redraw needed)
are true/false. So switch them to bool, so that users won't return
-Eerrors or anything else.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-36-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are currently two places with VESA blanking constants definitions:
fb.h and console.h. Extract/unify the two to a separate header (vesa.h).
Given the fb's is in an uapi header, create the common header in uapi
too.
Note that instead of macros, an enum (vesa_blank_mode) is created. But
the macros are kept too (they now expand to the enum constants), just in
case someone in userspace performs some #ifdeffery.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-33-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-1 is the same as VESA_VSYNC_SUSPEND in all con_blank() implementations.
So we can remove this special case from vgacon now too.
Despite con_blank() of fbcon looks complicated, the "if
(!fbcon_is_inactive(vc, info))" branch is not taken as we set
"ops->graphics = 1;" few lines above. So what matters there (as in all
other blank implementations except vgacon) is if 'blank' is zero or not.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-32-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The non-zero (true) return value from consw::con_switch() means a redraw
is needed. So make this return type a bool explicitly instead of int.
The latter might imply that -Eerrors are expected. They are not.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-31-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no difference between CM_MOVE and CM_DRAW. Either of them
enables the cursor. CM_ERASE then disables cursor.
So get rid of all of them and use simple "bool enable".
Note that this propagates down to the fbcon code.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-30-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a switch decicing if cursor should be drawn or not. The whole
switch can be simplified to one line. Do this cleanup as a preparatory
work for the next patch. There, all the CM_* constants are removed.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-29-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
