WiFi 7 chips can operate in various MLO applications, such as 1 link (2SS)
and 2 links (1SS + 1SS), and we should configure different PHY mode for
each of them.
For example,
- MLO_2_PLUS_0_1RF is 1 link with 2SS rate, and enable one RF component.
- MLO_1_PLUS_1_1RF is 2 links with 1SS rate for each, and enable one RF
component that can support two paths.
By default, we set the mode to legacy MLO_DBCC_NOT_SUPPORT (don't support
MLO and DBCC yet), and later we will introduce logic to change the mode.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240120003831.7014-2-pkshih@realtek.com
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range()/ida_alloc_max() is inclusive. So a -1 has been added
when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
According to new configuration spreadsheet from Toshiba for TC9595,
the Pixel PLL input clock have to be in range 6..40 MHz. The sheet
calculates those PLL input clock as reference clock divided by both
pre-dividers. Add the extra limit.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118220243.203655-1-marex@denx.de
Previous attempt to autodetect well-behaving patched firmware
introduced in commit 46a0a2c96f ("HID: lenovo: Detect quirk-free fw
on cptkbd and stop applying workaround") has shown that there are
false-positives on original firmware (on both 1st gen and 2nd gen
keyboards) which causes the middle button click workaround to be
mistakenly disabled.
This commit adds explicit parameter to sysfs to control this
workaround.
Fixes: 46a0a2c96f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Fixes: 43527a0094 ("HID: lenovo: Restrict detection of patched firmware only to USB cptkbd")
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The parameter "struct slab *slab" is unused in next_freelist_entry(),
so just remove it.
Acked-by: Christoph Lameter (Ampere) <cl@linux.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Since debug slab is processed by free_to_partial_list(), and only debug
slab which has SLAB_STORE_USER flag would care about the full list, we
can remove these unrelated full list manipulations from __slab_free().
Acked-by: Christoph Lameter (Ampere) <cl@linux.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The likely case is that we get a usable slab from the cpu partial list,
we can directly load freelist from it and return back, instead of going
the other way that need more work, like reenable interrupt and recheck.
But we need to remove the "VM_BUG_ON(!new.frozen)" in get_freelist()
for reusing it, since cpu partial slab is not frozen. It seems
acceptable since it's only for debug purpose.
And get_freelist() also assumes it can return NULL if the freelist is
empty, which is not possible for the cpu partial slab case, so we
add "VM_BUG_ON(!freelist)" after get_freelist() to make it explicit.
There is some small performance improvement too, which shows by:
perf bench sched messaging -g 5 -t -l 100000
mm-stable slub-optimize
Total time 7.473 7.209
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
An opaque directory cannot have xwhiteouts, so instead of marking an
xwhiteouts directory with a new xattr, overload overlay.opaque xattr
for marking both opaque dir ('y') and xwhiteouts dir ('x').
This is more efficient as the overlay.opaque xattr is checked during
lookup of directory anyway.
This also prevents unnecessary checking the xattr when reading a
directory without xwhiteouts, i.e. most of the time.
Note that the xwhiteouts marker is not checked on the upper layer and
on the last layer in lowerstack, where xwhiteouts are not expected.
Fixes: bc8df7a3dc ("ovl: Add an alternative type of whiteout")
Cc: <stable@vger.kernel.org> # v6.7
Reviewed-by: Alexander Larsson <alexl@redhat.com>
Tested-by: Alexander Larsson <alexl@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
There's a Cirque touchpad that wakes system up without anything touched
the touchpad. The input report is empty when this happens.
The reason is stated in HID over I2C spec, 7.2.8.2:
"If the DEVICE wishes to wake the HOST from its low power state, it can
issue a wake by asserting the interrupt."
This is fine if OS can put system back to suspend by identifying input
wakeup count stays the same on resume, like Chrome OS Dark Resume [0].
But for regular distro such policy is lacking.
Though the change doesn't bring any impact on power consumption for
touchpad is minimal, other i2c-hid device may depends on SLEEP control
power. So use a quirk to limit the change scope.
[0] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/power_manager/docs/dark_resume.md
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
[jkosina@suse.com: tweak changelog a bit]
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
I analyze the potential sleeping issue of the following processes:
Thread A Thread B
... netlink_create //ref = 1
do_mq_notify ...
sock = netlink_getsockbyfilp ... //ref = 2
info->notify_sock = sock; ...
... netlink_sendmsg
... skb = netlink_alloc_large_skb //skb->head is vmalloced
... netlink_unicast
... sk = netlink_getsockbyportid //ref = 3
... netlink_sendskb
... __netlink_sendskb
... skb_queue_tail //put skb to sk_receive_queue
... sock_put //ref = 2
... ...
... netlink_release
... deferred_put_nlk_sk //ref = 1
mqueue_flush_file
spin_lock
remove_notification
netlink_sendskb
sock_put //ref = 0
sk_free
...
__sk_destruct
netlink_sock_destruct
skb_queue_purge //get skb from sk_receive_queue
...
__skb_queue_purge_reason
kfree_skb_reason
__kfree_skb
...
skb_release_all
skb_release_head_state
netlink_skb_destructor
vfree(skb->head) //sleeping while holding spinlock
In netlink_sendmsg, if the memory pointed to by skb->head is allocated by
vmalloc, and is put to sk_receive_queue queue, also the skb is not freed.
When the mqueue executes flush, the sleeping bug will occur. Use
vfree_atomic instead of vfree in netlink_skb_destructor to solve the issue.
Fixes: c05cdb1b86 ("netlink: allow large data transfers from user-space")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20240122011807.2110357-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These functions are defined in the hid-nintendo.c file, but not called
elsewhere, so delete these unused functions.
drivers/hid/hid-nintendo.c:670:20: warning: unused function 'joycon_device_is_left_joycon'.
drivers/hid/hid-nintendo.c:674:20: warning: unused function 'joycon_device_is_right_joycon'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7992
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
After the DT conversion the SH-Mobile and Armadillo-800-EVA display
support, and the removal of the EMMA Mobile USB Gadget staging driver,
there is no longer a need to enable support for board staging drivers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/64c1d4613d5dfc1f70816f2136d66b75c8e39c1f.1705933656.git.geert+renesas@glider.be
After the DT conversion of SH-Mobile and Armadillo-800-EVA display
support, and the removal of the EMMA Mobile USB Gadget staging driver,
there is no longer a need to enable support for board staging or any
other staging drivers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/7f1fa862cb508a5d29947380b72324be027ac76f.1705933596.git.geert+renesas@glider.be
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to
fire somewhat randomly.
# # RUN so_incoming_cpu.before_reuseport.test3 ...
# # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0)
# # test3: Test terminated by assertion
# # FAIL so_incoming_cpu.before_reuseport.test3
# not ok 3 so_incoming_cpu.before_reuseport.test3
When the test failed, not-yet-accepted CLOSE_WAIT sockets received
SYN with a "challenging" SEQ number, which was sent from an unexpected
CPU that did not create the receiver.
The test basically does:
1. for each cpu:
1-1. create a server
1-2. set SO_INCOMING_CPU
2. for each cpu:
2-1. set cpu affinity
2-2. create some clients
2-3. let clients connect() to the server on the same cpu
2-4. close() clients
3. for each server:
3-1. accept() all child sockets
3-2. check if all children have the same SO_INCOMING_CPU with the server
The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse.
In a loop of 2., close() changed the client state to FIN_WAIT_2, and
the peer transitioned to CLOSE_WAIT.
In another loop of 2., connect() happened to select the same port of
the FIN_WAIT_2 socket, and it was reused as the default value of
net.ipv4.tcp_tw_reuse is 2.
As a result, the new client sent SYN to the CLOSE_WAIT socket from
a different CPU, and the receiver's sk_incoming_cpu was overwritten
with unexpected CPU ID.
Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket
responded with Challenge ACK. The new client properly returned RST
and effectively killed the CLOSE_WAIT socket.
This way, all clients were created successfully, but the error was
detected later by 3-2., ASSERT_EQ(cpu, i).
To avoid the failure, let's make sure that (i) the number of clients
is less than the number of available ports and (ii) such reuse never
happens.
Fixes: 6df96146b2 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
clock management unit.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119111132.1290455-2-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On CPUs with weak memory models, reads and updates performed by tcp_push
to the sk variables can get reordered leaving the socket throttled when
it should not. The tasklet running tcp_wfree() may also not observe the
memory updates in time and will skip flushing any packets throttled by
tcp_push(), delaying the sending. This can pathologically cause 40ms
extra latency due to bad interactions with delayed acks.
Adding a memory barrier in tcp_push removes the bug, similarly to the
previous commit bf06200e73 ("tcp: tsq: fix nonagle handling").
smp_mb__after_atomic() is used to not incur in unnecessary overhead
on x86 since not affected.
Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu
22.04 and Apache Tomcat 9.0.83 running the basic servlet below:
import java.io.IOException;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class HelloWorldServlet extends HttpServlet {
@Override
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=utf-8");
OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8");
String s = "a".repeat(3096);
osw.write(s,0,s.length());
osw.flush();
}
}
Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS
c6i.8xlarge instance. Before the patch an additional 40ms latency from P99.99+
values is observed while, with the patch, the extra latency disappears.
No patch and tcp_autocorking=1
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.60.173:8080/hello/hello
...
50.000% 0.91ms
75.000% 1.13ms
90.000% 1.46ms
99.000% 1.74ms
99.900% 1.89ms
99.990% 41.95ms <<< 40+ ms extra latency
99.999% 48.32ms
100.000% 48.96ms
With patch and tcp_autocorking=1
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.60.173:8080/hello/hello
...
50.000% 0.90ms
75.000% 1.13ms
90.000% 1.45ms
99.000% 1.72ms
99.900% 1.83ms
99.990% 2.11ms <<< no 40+ ms extra latency
99.999% 2.53ms
100.000% 2.62ms
Patch has been also tested on x86 (m7i.2xlarge instance) which it is not
affected by this issue and the patch doesn't introduce any additional
delay.
Fixes: 7aa5470c2c ("tcp: tsq: move tsq_flags close to sk_wmem_alloc")
Signed-off-by: Salvatore Dipietro <dipiets@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240119190133.43698-1-dipiets@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
0x1540 is the address of 4th render target address pair (two pixel pipes).
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
These ones will be needed to make use fo the NN and TP units in the NPUs
based on Vivante IP.
Also fix the number of NN cores in the VIPNano-qi.
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Acked-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Module level clock gating and the pulse eater might interfere with
the GPU reset, as they both have the potential to stop the clock
and thus reset propagation to parts of the GPU.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
The 'len' parameter is the 4th argument, because it is not get used, so
drop it. No functional change.
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
As in the etnaviv_gem_get_pages() function, the point to the drm_device
has already been cached to the 'dev' local variable. We can use it
directly, While at it, using 'unsigned int' type to count the number of
pages. As the drm_prime_pages_to_sg() function takes an unsigned int type
for its third argument. No functional change.
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
[lst: Reword subject to make more generic and match patch content]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This patch make the code in the etnaviv_pdev_probe() less twisted, and it
also make it easier to drop the reference to device node after finished.
Before apply this patch, there is no call to of_node_put() when done. We
should call of_node_put() when done.
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Enable support for nomodeset= parameter via CONFIG_VIDEO. Both,
DRM and fbdev, already select this option. Remove the existing
option CONFIG_VIDEO_NOMODESET. Simplifies the Kconfig rules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118090721.7995-4-tzimmermann@suse.de
The function __video_get_options() only exists for compatibility
with old fbdev drivers that cannot be refactored easily. Hide it
behind CONFIG_FB_CORE.
v2:
* support CONFIG_FB_CORE=m via IS_ENABLED() (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118090721.7995-3-tzimmermann@suse.de
Add CONFIG_VIDEO for common code in drivers/video/. Use the option to
select helpers for the video= parameter. Replaces CONFIG_VIDEO_CMDLINE.
Other common code in drivers/video/ can be moved behind CONFIG_VIDEO,
which will simplify the Kconfig rules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118090721.7995-2-tzimmermann@suse.de
The device fails to initialize otherwise, giving the following error:
[ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240123084935.2745-1-belegdol+github@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently icl_compute_tc_phy_dplls() assumes that the active
PLL will be the TC PLL (as opposed to the TBT PLL). The actual
PLL will be selected during the modeset enable sequence, but
we need to put *something* into the crtc_state->shared_dpll
already during compute_config().
The downside of assuming one PLL or the other is that we'll
fail to fastset if the assumption doesn't match what was in
use previously. So let's instead keep the same PLL that was
in use previously (assuming there was one). This should allow
fastset to work again when using TBT PLL, at least in the
steady state.
Now, assuming we want keep the same PLL may not be entirely
correct either. But we should be covered by the type-c link
reset handling which will force a full modeset by flagging
connectors_changed=true which means the resulting modeset
can't be converted into a fastset even if the full crtc state
looks identical.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118142436.25928-1-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
We would like to use for_each loop for status = "reserved" nodes.
Add for_each_reserved_child_of_node() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/87a5pegfau.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Linux Kernel has of_get_next_available_child().
Add more generic of_get_next_status_child() to enable to use same
logic for other status.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87bk9ugfb0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Linux Kernel has __of_device_is_available() / __of_device_is_fail(),
these are checking if the status was "okay" / "ok" / "fail" / "fail-".
Add more generic __of_device_is_status() function for these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87cyuagfba.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Avoid a kernel crash in stifb by providing the correct pointer to the fb_info
struct. Prior to commit e2e0b838a1 ("video/sticore: Remove info field from
STI struct") the fb_info struct was at the beginning of the fb struct.
Fixes: e2e0b838a1 ("video/sticore: Remove info field from STI struct")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Customer has reported an issue with specific desktop platform
where two CS42L42 codecs are connected to CS8409 HDA bridge.
If "Master Volume Control" is created then on Ubuntu OS UCM
left/right balance slider in UI audio settings has no effect.
This patch will fix this issue for a target paltform.
Fixes: 20e5077241 ("ALSA: hda/cs8409: Add support for dolphin")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240122184710.5802-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apollo Lake seems to also suffer from IRQ timing issues. After being up for ~4
minutes, a Pentium N4200 system ends up falling back to workqueue-based IRQ
handling:
[ 208.019906] snd_hda_intel 0000:00:0e.0: IRQ timing workaround is activated
for card #0. Suggest a bigger bdl_pos_adj.
Unfortunately, the Baytrail and Braswell workaround value of 32 samples isn't
enough to fix the issue here. Default to 64 samples.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240122114512.55808-3-rsalvaterra@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have self-explanatory constants for Intel HDA devices, let's use them instead
of magic numbers and code comments.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240122114512.55808-2-rsalvaterra@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SC7180 UFS PHY is identical to the one found on SM7150. Add a
compatible for it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-5-f7d1212c8ebb@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now that we have evsel__taskstate() which no longer relies on the
hardcoded task state string and has good backward compatibility,
we have a good reason to use it.
Note TASK_STATE_TO_CHAR_STR and task bitmasks are useless now so
we remove them for good. And now we pass the state info back and
forth in a symbolic char which explains itself well instead.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240123022425.1611483-1-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now that we have the __prinf_flags() parsing routines, we add a new
helper evsel__taskstate() to extract the task state info from the
recorded data.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240122070859.1394479-5-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Perf uses a hard coded string "RSDTtXZPI" to index the sched_switch
prev_state field raw bitmask value. This works well except for when
the kernel changes this string, in which case this will break again.
Instead we add a new way to parse task state string from tracepoint
print format already recorded by perf, which eliminates the further
dependencies with this hardcode and unmaintainable macro, and this
is exactly what libtraceevent[1] does for now.
So we borrow the print flags parsing logic from libtraceevent[1].
And in get_states(), we walk the print arguments until the
__print_flags() for the target state field is found, and use that to
build the states string for future parsing.
[1]: https://lore.kernel.org/linux-trace-devel/20231224140732.7d41698d@rorschach.local.home/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ze Gao <zegao@tencent.com>
Link: https://lore.kernel.org/r/20240122070859.1394479-4-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update state char array to match the latest kernel definitions and
remove unused state mapping macros.
Note this is the preparing patch for get rid of the way to parse
process state from raw bitmask value. Instead we are going to
parse it from the recorded tracepoint print format, and this change
marks why we're doing it.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240122070859.1394479-3-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, in the example code use the purpose specific kcalloc() function
instead of the argument size * count in the kzalloc() function.
At the same time, modify the translations accordingly.
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Hu Haowen <2023002089@link.tyut.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Hu Haowen <2023002089@link.tyut.edu.cn>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Before proceeding with the probe and enabling frequency scaling for the
CPUs, make sure that all supplies feeding the CPUs have probed.
This fixes an issue observed on MT8195-Tomato where if the
mediatek-cpufreq-hw driver enabled the hardware (by writing to
REG_FREQ_ENABLE) before the SPMI controller driver (spmi-mtk-pmif),
behind which lies the big CPU supply, probed the platform would hang
shortly after with "rcu: INFO: rcu_preempt detected stalls on
CPUs/tasks" being printed in the log.
Fixes: 4855e26bcf ("cpufreq: mediatek-hw: Add support for CPUFREQ HW")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return 0 in case of error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reading the ocotp register directly is unsafe and will cause the system
to hang if its clock is not turned on in CCM. The regmap interface has
clk enabled, which can solve this problem.
Signed-off-by: tianyu2 <tianyu2@kernelsoft.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When registering the riscv-timer or clint-timer as a clock_event device,
the driver needs to specify the value of max_delta_ticks. This value
directly influences the max_delta_ns, which represents the maximum time
interval for configuring subsequent clock events. Currently, both
riscv-timer and clint-timer are set with a max_delta_ticks value of
0x7fff_ffff. When the timer operates at a high frequency, this values
limists the system to sleep only for a short time. For the 1GHz case,
the sleep cannot exceed two seconds. To address this limitation, refer to
other timer implementations to extend it to 2^(bit-width of the timer) - 1.
Because the bit-width of $mtimecmp is 64bit, this value becomes ULONG_MAX
(0xffff_ffff_ffff_ffff).
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20230905070945.404653-1-vincent.chen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Eric Biggers <ebiggers@kernel.org> says:
This patchset, which applies to v6.8-rc1, adds cryptographic algorithm
implementations accelerated using the RISC-V vector crypto extensions
(https://github.com/riscv/riscv-crypto/releases/download/v1.0.0/riscv-crypto-spec-vector.pdf)
and RISC-V vector extension
(https://github.com/riscv/riscv-v-spec/releases/download/v1.0/riscv-v-spec-1.0.pdf).
The following algorithms are included: AES in ECB, CBC, CTR, and XTS modes;
ChaCha20; GHASH; SHA-2; SM3; and SM4.
In general, the assembly code requires a 64-bit RISC-V CPU with VLEN >= 128,
little endian byte order, and vector unaligned access support. The ECB, CTR,
XTS, and ChaCha20 code is designed to naturally scale up to larger VLEN values.
Building the assembly code requires tip-of-tree binutils (future 2.42) or
tip-of-tree clang (future 18.x). All algorithms pass testing in QEMU, using
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y. Much of the assembly code is derived from
OpenSSL code that was added by https://github.com/openssl/openssl/pull/21923.
It's been cleaned up for integration with the kernel, e.g. reducing code
duplication, eliminating use of .inst and perlasm, and fixing a few bugs.
This patchset incorporates the work of multiple people, including Jerry Shih,
Heiko Stuebner, Christoph Müllner, Phoebe Chen, Charalampos Mitrodimas, and
myself. This patchset went through several versions from Heiko (last version
https://lore.kernel.org/linux-crypto/20230711153743.1970625-1-heiko@sntech.de),
then several versions from Jerry (last version:
https://lore.kernel.org/linux-crypto/20231231152743.6304-1-jerry.shih@sifive.com),
then finally several versions from me. Thanks to everyone who has contributed
to this patchset or its prerequisites.
* b4-shazam-merge:
crypto: riscv - add vector crypto accelerated SM4
crypto: riscv - add vector crypto accelerated SM3
crypto: riscv - add vector crypto accelerated SHA-{512,384}
crypto: riscv - add vector crypto accelerated SHA-{256,224}
crypto: riscv - add vector crypto accelerated GHASH
crypto: riscv - add vector crypto accelerated ChaCha20
crypto: riscv - add vector crypto accelerated AES-{ECB,CBC,CTR,XTS}
RISC-V: hook new crypto subdir into build-system
RISC-V: add TOOLCHAIN_HAS_VECTOR_CRYPTO
RISC-V: add helper function to read the vector VLEN
Link: https://lore.kernel.org/r/20240122002024.27477-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
