Syzkaller has reported a NULL pointer dereference when accessing
rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating
rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in
gfs2_rgrp_dump() to prevent that.
Reported-and-tested-by: syzbot+da0fc229cc1ff4bb2e6d@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=da0fc229cc1ff4bb2e6d
Fixes: 72244b6bc7 ("gfs2: improve debug information when lvb mismatches are found")
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on
resume.
```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```
In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.
Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.
Cc: Kieran Levin <ktl@framework.net>
Link: https://github.com/FrameworkComputer/EmbeddedController/blob/lotus-zephyr/zephyr/program/lotus/azalea/src/power_sequence.c#L313 [1]
Link: https://community.frame.work/t/amd-wont-sleep-properly/41755
Link: https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-wakeup-behavior-feedback/39128
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-5-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Other platforms may need to disable keyboard wakeup besides Cezanne,
so move the detection into amd_pmc_quirks_init() where it may be applied
to multiple platforms.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-4-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but
may be extended to other platforms in the future. Rename the function
and only check platform firmware version when it's called for a Cezanne
based platform.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The platform defines will be used by the quirks in the future,
so move them to the common header to allow use by both source
files.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For input value 0, PMC stays unassigned which causes crash while trying
to access PMC for register read/write. Include LTR index 0 in pmc_index
and ltr_index calculation.
Fixes: 2bcef45292 ("platform/x86:intel/pmc: Enable debugfs multiple PMC support")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011650.1973941-1-rajvi.jingar@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some ThinkPad systems ECFW use non-standard addresses for fan control
and reporting. This patch adds support for such ECFW so that it can report
the correct fan values.
Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is a few things done:
- include only the headers we are direct user of
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
max_dr_freq and curr_dr_freq is calculated and set in
sdw_bus_master_add(). Setting in the driver is reduanant, so drop that.
Set max_clk_freq instead.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20231129130449.9892-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For others to be able to pull from in a stable way.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZXxnUw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFagCgzXm3+51TOHV3ScP/ZglEFZZUCZoAmgMlaukR
yXLJsCZLWTXwahQewglC
=8xEi
-----END PGP SIGNATURE-----
Merge tag 'device_is_big_endian-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into gpio/for-next
Tag for the device_is_big_endian() addition to property.h
For others to be able to pull from in a stable way.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original rationale for
commit cd456f8d06 ("drm: Restrict stackdepot usage to builtin drm.ko")
was that depot_save_stack() (which is what we used back then)
wasn't exported. stack_depot_save() (which is what we use now) is
exported however, so relax the dependency allow CONFIG_DRM_MM_DEBUG
with DRM=m.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215111129.9559-1-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Sometimes policy binary retrieved from the BIOS maybe incorrect that can
end up in failing to enable the Smart PC solution feature.
Use print_hex_dump_debug() to dump the policy binary in hex, so that we
debug the issues related to the binary even before sending that to TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-13-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A policy binary is OS agnostic, and the same policies are expected to work
across the OSes. At times it becomes difficult to debug when the policies
inside the policy binaries starts to misbehave. Add a way to sideload such
policies independently to debug them via a debugfs entry.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-12-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It seems reasonable to collect the core parts for the generic PM domain,
along with its corresponding provider drivers. Therefore let's move the
files from drivers/base/power/ to drivers/pmdomain/ and while at it, let's
also rename the files accordingly.
Moreover, let's also update MAINTAINERS to reflect the update.
Cc: Kevin Hilman <khilman@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231213113305.29098-1-ulf.hansson@linaro.org
PMF driver sends constant inputs to TA which its gets via the other
subsystems in the kernel. To debug certain TA issues knowing what inputs
being sent to TA becomes critical. Add debug facility to the driver which
can isolate Smart PC and TA related issues.
Also, make source_as_str() as non-static function as this helper is
required outside of sps.c file.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-11-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add amd_pmf prefix to source_as_str() function, so that the function name
does not look generic. As this is a helper function make it as non-static
so that it can be reused across multiple PMF features.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-10-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver based on the output actions from the TA can request to update
the system states like entering s0i3, lock screen etc. by generating
an uevent. Based on the udev rules set in the userspace the event id
matching the uevent shall get updated accordingly using the systemctl.
Sample udev rules under Documentation/admin-guide/pmf.rst.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
P3T (Peak Package Power Limit) is a metric within the SMU controller
that can influence the power limits. Add support from the driver
to update P3T limits accordingly.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver sends changing inputs from each subystem to TA for evaluating
the conditions in the policy binary.
Add initial support of plumbing in the PMF driver for Smart PC to get
information from other subsystems in the kernel.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
To sideload pmf policy binaries, the Smart PC Solution Builder provides a
debugfs file called "update_policy"; that gets created under a new debugfs
directory called "pb" and this new directory has to be associated with
existing parent directory for PMF driver called "amd_pmf".
In the current code structure, amd_pmf_dbgfs_register() is called after
amd_pmf_init_features(). This will not help when the Smart PC builder
feature has to be assoicated to the parent directory.
Hence change the order of amd_pmf_dbgfs_register() and call it before
amd_pmf_init_features() so that when the Smart PC init happens, it has the
parent debugfs directory to get itself hooked.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF Policy binary is a encrypted and signed binary that will be part
of the BIOS. PMF driver via the ACPI interface checks the existence
of Smart PC bit. If the advertised bit is found, PMF driver walks
the acpi namespace to find out the policy binary size and the address
which has to be passed to the TA during the TA init sequence.
The policy binary is comprised of inputs (or the events) and outputs
(or the actions). With the PMF ecosystem, OEMs generate the policy
binary (or could be multiple binaries) that contains a supported set
of inputs and outputs which could be specifically carved out for each
usage segment (or for each user also) that could influence the system
behavior either by enriching the user experience or/and boost/throttle
power limits.
Once the TA init command succeeds, the PMF driver sends the changing
events in the current environment to the TA for a constant sampling
frequency time (the event here could be a lid close or open) and
if the policy binary has corresponding action built within it, the
TA sends the action for it in the subsequent enact command.
If the inputs sent to the TA has no output defined in the policy
binary generated by OEMs, there will be no action to be performed
by the PMF driver.
Example policies:
1) if slider is performance ; set the SPL to 40W
Here PMF driver registers with the platform profile interface and
when the slider position is changed, PMF driver lets the TA know
about this. TA sends back an action to update the Sustained
Power Limit (SPL). PMF driver updates this limit via the PMFW mailbox.
2) if user_away ; then lock the system
Here PMF driver hooks to the AMD SFH driver to know the user presence
and send the inputs to TA and if the condition is met, the TA sends
the action of locking the system. PMF driver generates a uevent and
based on the udev rule in the userland the system gets locked with
systemctl.
The intent here is to provide the OEM's to make a policy to lock the
system when the user is away ; but the userland can make a choice to
ignore it.
The OEMs will have an utility to create numerous such policies and
the policies shall be reviewed by AMD before signing and encrypting
them. Policies are shared between operating systems to have seemless user
experience.
Since all this action has to happen via the "amdtee" driver, currently
there is no caller for it in the kernel which can load the amdtee driver.
Without amdtee driver loading onto the system the "tee" calls shall fail
from the PMF driver. Hence an explicit MODULE_SOFTDEP has been added
to address this.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the current code, the metrics table information was required only
for auto-mode or CnQF at a given time. Hence keeping the return type
of amd_pmf_set_dram_addr() as static made sense.
But with the addition of Smart PC builder feature, the metrics table
information has to be shared by the Smart PC also and this feature
resides outside of core.c.
To make amd_pmf_set_dram_addr() visible outside of core.c make it
as a non-static function and move the allocation of memory for
metrics table from amd_pmf_init_metrics_table() to amd_pmf_set_dram_addr()
as amd_pmf_set_dram_addr() is the common function to set the DRAM
address.
Add a suspend handler that can free up the allocated memory for getting
the metrics table information.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF TA (Trusted Application) loads via the TEE environment into the
AMD ASP.
PMF-TA supports two commands:
1) Init: Initialize the TA with the PMF Smart PC policy binary and
start the policy engine. A policy is a combination of inputs and
outputs, where;
- the inputs are the changing dynamics of the system like the user
behaviour, system heuristics etc.
- the outputs, which are the actions to be set on the system which
lead to better power management and enhanced user experience.
PMF driver acts as a central manager in this case to supply the
inputs required to the TA (either by getting the information from
the other kernel subsystems or from userland)
2) Enact: Enact the output actions from the TA. The action could be
applying a new thermal limit to boost/throttle the power limits or
change system behavior.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
AMD PMF driver loads the PMF TA (Trusted Application) into the AMD
ASP's (AMD Security Processor) TEE (Trusted Execution Environment).
PMF Trusted Application is a secured firmware placed under
/lib/firmware/amdtee gets loaded only when the TEE environment is
initialized. Add the initial code path to build these pipes.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After switching to directly using dma_fence instead of i915_sw_fence we
have left some dead code around intel_atomic_helper->free_list. Remove that
dead code.
v2: Remove intel_atomic_state->freed as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114134141.2527694-1-jouni.hogander@intel.com
pKVM does not support external trace for protected VMs. Trap
external trace, and add the ExtTrcBuff to make it possible to
check for the feature.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-18-tabba@google.com
Protected VMs will only support basic PAuth (FEAT_PAuth). Mark it
as restricted to ensure that later versions aren't supported for
protected guests.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-17-tabba@google.com
Cache maintenance operations are not trapped for protected VMs,
and shouldn't be. Mark them as allowed.
Moreover, features advertised by ID_AA64PFR2 and ID_AA64MMFR3 are
(already) not allowed, mark them as such.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-16-tabba@google.com
There's a lot of boilerplate code for setting and clearing FGT
bits when activating guest traps. Refactor it into macros. These
macros will also be used in future patch series.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-15-tabba@google.com
Now that RES0 and MASK have full coverage, no need to manually
encode nMASK. Calculate it relative to the other fields.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-14-tabba@google.com
Now that all FGT fields are accounted for and represented, use
the generated value instead of manually specifying them.
For __HFGWTR_EL2_RES0, however, there is no generated value. Its
fields are subset of HFGRTR_EL2, with the remaining being RES0.
Therefore, add a mask that represents the HFGRTR_EL2 only bits
and define __HFGWTR_EL2_* using those and the __HFGRTR_EL2_*
fields.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-13-tabba@google.com
These checks help ensure that all the bits are accounted for,
that there hasn't been a transcribing error from the spec nor
from the generated mask values, which will be used in subsequent
patches.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-12-tabba@google.com
New trap bits have been defined since the latest update to this
patch. Moreover, the existing definitions of some of the mask
and the RES0 bits overlap, which could be wrong, confusing, or
both.
Update the bits based on DDI0601 2023-09, and ensure that the
existing bits are consistent.
Subsequent patches will use the generated RES0 fields instead of
specifying them manually. This patch keeps the manual encoding of
the bits to make it easier to review the series.
Fixes: 0fd7686500 ("KVM: arm64: Add nPIR{E0}_EL1 to HFG traps")
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-11-tabba@google.com
Add the encodings to fine grain trapping fields for HAFGRTR_EL2
and add the associated handling code in nested virt. Based on
DDI0601 2023-09. Add the missing field definitions as well,
both to generate the correct RES0 mask and to be able to toggle
their FGT bits.
Also add the code for handling FGT trapping, reading of the
register, to nested virt.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-10-tabba@google.com
The func_addr used to be NULL for indirect trampolines used by struct_ops.
Now func_addr is a valid function pointer.
Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition.
Fixes: 2cd3e3772e ("x86/cfi,bpf: Fix bpf_struct_ops CFI")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com
In the root complex pci endpoint test function driver, change macros and
functions names using the term "legacy" to use "intx" instead to
match the term used in the PCI specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-6-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the endpoint test function driver, rename IRQ_TYPE_LEGACY to
IRQ_TYPE_INTX and COMMAND_RAISE_LEGACY_IRQ to COMMAND_RAISE_INTX_IRQ
to match the term used in the PCI specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-5-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the endpoint controller core code, change references to "legacy"
interrupts to "INTX" interrupts to match the term used in the PCI
specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-4-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
linux/pci.h defines the IRQ flags PCI_IRQ_INTX, PCI_IRQ_MSI and
PCI_IRQ_MSIX. Let's use these flags directly instead of the endpoint
definitions provided by enum pci_epc_irq_type. This removes the need
for defining this enum type completely.
Link: https://lore.kernel.org/r/20231122060406.14695-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit about the type
of IRQ being referenced as well as to match the PCI specifications
terms. Redefine PCI_IRQ_LEGACY as an alias to PCI_IRQ_INTX to avoid the
need for doing the renaming tree-wide. New drivers and new code should
now prefer using PCI_IRQ_INTX instead of PCI_IRQ_LEGACY.
Link: https://lore.kernel.org/r/20231122060406.14695-2-dlemoal@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The name of the structure drm_atomic_state is confusing. Let's add an
entry to our todo list to rename it.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-5-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The current documentation of drm_atomic_state says that it's the "global
state object". This is confusing since, while it does contain all the
objects affected by an update and their respective states, if an object
isn't affected by this update it won't be part of it.
Thus, it's not truly a "global state", unlike object state structures
that do contain the entire state of a given object.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://lore.kernel.org/r/20231214100917.277842-4-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commits 63e83c1dba ("drm: Consolidate connector arrays in
drm_atomic_state"), b8b5342b69 ("drm: Consolidate plane arrays in
drm_atomic_state") and 5d943aa6c0 ("drm: Consolidate crtc arrays in
drm_atomic_state") moved the object pointer and their state pointer to
an intermediate structure storing both.
The CRTC commit didn't update the doc of the crtcs field to reflect
that, and the doc for the planes and connectors fields mention that they
are pointers to an array of structures with per-$OBJECT data.
The private_objs field was added later on by commit b430c27a7d ("drm:
Add driver-private objects to atomic state") reusing the same sentence
than the crtcs field, probably due to copy and paste.
While these fields are indeed pointers to an array, each item of that
array contain a pointer to the object structure affected by the update,
and its old and new state. There's no per-object data there, and there's
more than just a pointer to the objects.
Let's rephrase those fields a bit to better match the current situation.
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-3-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 63e83c1dba ("drm: Consolidate connector arrays in
drm_atomic_state") removed the connector_states field but didn't remove
its mention in the num_connectors documentation.
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-2-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Some fields of drm_atomic_state have been documented in-line, but some
were documented in the main kerneldoc block before the structure.
Since the former is the preferred option in DRM, let's move all the
fields to an inline documentation.
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20231214100917.277842-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
DFL:
- Philipp's change uses memdup_array_user() to do better overflow check
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCZX/adBMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaYr4BAN3ETNLgUIhQ9Uc9qElSwfs2LvcoHcrf
3uUwMNdH2UXxAP9jMBRsfc41f1NzDbpHtjt6WgB/dTTQIqiZxsoRnn6DDg==
=PXVw
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.8-rc1
DFL:
- Philipp's change uses memdup_array_user() to do better overflow check
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
drivers/fpga: use standard array-copy function
Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that vesafb can modify it at
will.
v2:
* comment on devm_kmemdup() usage (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-5-tzimmermann@suse.de
