One a zoned filesystem, never clear the dirty flag of an extent buffer,
but instead mark it as zeroout.
On writeout, when encountering a marked extent_buffer, zero it out.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
EXTENT_BUFFER_ZONED_ZEROOUT better describes the state of the extent buffer,
namely it is written as all zeros. This is needed in zoned mode, to
preserve I/O ordering.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent_io_tree is embedded in several structures, notably in struct
btrfs_inode. The fs_info is only used for reporting errors and for
reference in trace points. We can get to the pointer through the inode,
but not all io trees set it. However, we always know the owner and
can recognize if inode is valid. For access helpers are provided, const
variant for the trace points.
This reduces size of extent_io_tree by 8 bytes and following structures
in turn:
- btrfs_inode 1104 -> 1088
- btrfs_device 520 -> 512
- btrfs_root 1360 -> 1344
- btrfs_transaction 456 -> 440
- btrfs_fs_info 3600 -> 3592
- reloc_control 1520 -> 1512
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass the type of the extent io tree operation which failed in the report
helper. The message wording and contents is updated, though locking
might be the cause of the error it's probably not the only one and we're
interested in the state.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The printk helpers take const fs_info if it's used just for the
identifier in the messages, __btrfs_panic() lacks that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper insert_state errors are handled in all callers and reported
by extent_io_tree_panic so we don't need to do it twice.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The per-inode file extent tree was added in 41a2ee75aa ("btrfs:
introduce per-inode file extent tree"), it's the only tree type
that requires the lockdep class. Move it to the file where it is
actually used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not needed to have a local variable to store the stripe size at
insert_dev_extents(), we can just take from the chunk map as it's only
used once and typing 'map->stripe_size' is not much more verbose than
simply typing 'stripe_size'. So remove the local variable.
This was added before the recent addition of a dedicated structure for
chunk mappings because the stripe size was encoded in the 'orig_block_len'
field of an extent_map structure, so the use of the local variable made
things more readable.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we abuse the extent_map structure for two purposes:
1) To actually represent extents for inodes;
2) To represent chunk mappings.
This is odd and has several disadvantages:
1) To create a chunk map, we need to do two memory allocations: one for
an extent_map structure and another one for a map_lookup structure, so
more potential for an allocation failure and more complicated code to
manage and link two structures;
2) For a chunk map we actually only use 3 fields (24 bytes) of the
respective extent map structure: the 'start' field to have the logical
start address of the chunk, the 'len' field to have the chunk's size,
and the 'orig_block_len' field to contain the chunk's stripe size.
Besides wasting a memory, it's also odd and not intuitive at all to
have the stripe size in a field named 'orig_block_len'.
We are also using 'block_len' of the extent_map structure to contain
the chunk size, so we have 2 fields for the same value, 'len' and
'block_len', which is pointless;
3) When an extent map is associated to a chunk mapping, we set the bit
EXTENT_FLAG_FS_MAPPING on its flags and then make its member named
'map_lookup' point to the associated map_lookup structure. This means
that for an extent map associated to an inode extent, we are not using
this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform);
4) Extent maps associated to a chunk mapping are never merged or split so
it's pointless to use the existing extent map infrastructure.
So add a dedicated data structure named 'btrfs_chunk_map' to represent
chunk mappings, this is basically the existing map_lookup structure with
some extra fields:
1) 'start' to contain the chunk logical address;
2) 'chunk_len' to contain the chunk's length;
3) 'stripe_size' for the stripe size;
4) 'rb_node' for insertion into a rb tree;
5) 'refs' for reference counting.
This way we do a single memory allocation for chunk mappings and we don't
waste memory for them with unused/unnecessary fields from an extent_map.
We also save 8 bytes from the extent_map structure by removing the
'map_lookup' pointer, so the size of struct extent_map is reduced from
144 bytes down to 136 bytes, and we can now have 30 extents map per 4K
page instead of 28.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no reason to open code what btrfs_next_item() does when searching
for extent items at scrub.c:scrub.c:find_first_extent_item(), so remove
the logic to find the next item and use btrfs_next_item() instead, making
the code shorter and less nested code blocks. While at it also fix the
comment to the plural "items" instead of "item" and end it with proper
punctuation.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper extent_map_block_end() is currently not used anywhere outside
extent_map.c, so move into from extent_map.h into extent_map.c. While at
it, also make the extent map pointer argument as const.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When starting a transaction to remove a block group we have one ASSERT
that checks we found an extent map and that the extent map's start offset
matches the desired chunk offset. In case one of the conditions fails, we
get a stack trace that point to the respective line of code, however we
can't tell which condition failed: either there's no extent map or we got
one with an unexpected start offset. To make such an issue easier to debug
and analyse, split the assertion into two, one for each condition. This
was actually triggered during development of another upcoming change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity
checks to verify that we found an extent map and that it includes the
requested logical address. These are never expected to fail, so mark
them as unlikely to make it more clear as well as to allow a compiler
to generate more efficient code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Looks like the struct member was added in 2007 in 2.6.29 in commit
87ee04eb0f ("Btrfs: Add simple stripe size parameter") but hasn't been
used at all since. So let's remove it. This was found by tool
https://github.com/jirislaby/clang-struct, then build tested after
removing the struct member.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The declaration was temporarily moved in a4055213bf ("btrfs: unexport
all the temporary exports for extent-io-tree.c") and then should have
been removed in 6.0 in 071d19f513 ("btrfs: remove struct tree_entry in
extent-io-tree.c") but was not. This was found by tool
https://github.com/jirislaby/clang-struct .
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The raid56 changes in 6.2 reworked the IO path to RMW, commit
93723095b5 ("btrfs: raid56: switch write path to rmw_rbio()") in
particular removed the last use of the work member so it can be removed
as well. This was found by tool https://github.com/jirislaby/clang-struct .
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The whole isize code was deleted in 5.6 3f1c64ce04 ("btrfs: delete the
ordered isize update code"), except the struct member. This was found
by tool https://github.com/jirislaby/clang-struct .
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The recent scrub rewrite forgot to remove the sectors_per_bio in
6.3 in 13a62fd997 ("btrfs: scrub: remove scrub_bio structure").
This was found by tool https://github.com/jirislaby/clang-struct .
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As a cleanup and preparation for future folio migration, this patch
would replace all page->private to folio version. This includes:
- PagePrivate()
-> folio_test_private()
- page->private
-> folio_get_private()
- attach_page_private()
-> folio_attach_private()
- detach_page_private()
-> folio_detach_private()
Since we're here, also remove the forced cast on page->private, since
it's (void *) already, we don't really need to do the cast.
For now even if we missed some call sites, it won't cause any problem
yet, as we're only using order 0 folio (single page), thus all those
folio/page flags should be synced.
But for the future conversion to utilize higher order folio, the page
<-> folio flag sync is no longer guaranteed, thus we have to migrate to
utilize folio flags.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The pages are now allocated and freed centrally, so we can extend the
logic to manage the lifetime. The main idea is to keep a few recently
used pages and hand them to all writers. Ideally we won't have to go to
allocator at all (a slight performance gain) and also raise chance that
we'll have the pages available (slightly increased reliability).
In order to avoid gathering too many pages, the shrinker is attached to
the cache so we can free them on when MM demands that. The first
implementation will drain the whole cache. Further this can be refined
to keep some minimal number of pages for emergency purposes. The
ultimate goal to avoid memory allocation failures on the write out path
from the compression.
The pool threshold is set to cover full BTRFS_MAX_COMPRESSED / PAGE_SIZE
for minimal thread pool, which is 8 (btrfs_init_fs_info()). This is 128K
/ 4K * 8 = 256 pages at maximum, which is 1MiB.
This is for all filesystems currently mounted, with heavy use of
compression IO the allocator is still needed. The cache helps for short
burst IO.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparation for managing compression pages in a cache-like
manner, instead of asking the allocator each time. The common allocation
and free wrappers are introduced and are functionally equivalent to the
current code.
The freeing helpers need to be carefully placed where the last reference
is dropped. This is either after directly allocating (error handling)
or when there are no other users of the pages (after copying the contents).
It's safe to not use the helper and use put_page() that will handle the
reference count. Not using the helper means there's lower number of
pages that could be reused without passing them back to allocator.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
The function __btrfs_update_delayed_inode() is doing something not
meeting the code standard of today:
path->slots[0]++
if (path->slots[0] >= btrfs_header_nritems(leaf))
goto search;
again:
if (!is_the_target_inode_ref())
goto out;
ret = btrfs_delete_item();
/* Some cleanup. */
return ret;
search:
ret = search_for_the_last_inode_ref();
goto again;
With the tag named "again", it's pretty common to think it's a loop, but
the truth is, we only need to do the search once, to locate the last
(also the first, since there should only be one INODE_REF or
INODE_EXTREF now) ref of the inode.
[FIX]
Instead of the weird jumps, just do them in a stream-lined fashion.
This removes those weird labels, and add extra comments on why we can do
the different searches.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The logic in btrfs_block_can_be_shared() is hard to follow as we have a
lot of conditions in a single if statement including a subexpression with
a logical or and two nested if statements inside the main if statement.
Make this easier to read by using separate if statements that return
immediately when we find a condition that determines if a block can be
or can not be shared.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_block_can_be_shared() returns an int that is used as a
boolean. Since it all it needs is to return true or false, and it can't
return errors for example, change the return type from int to bool to
make it a bit more readable and obvious.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The logged_list[2] and log_extents_lock[2] members of struct btrfs_root
are no longer used, their last use was removed in commit 5636cf7d6d
("btrfs: remove the logged extents infrastructure"). So remove these
fields. This reduces the size of struct btrfs_root, on a release kernel,
from 1392 bytes down to 1352 bytes.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The prototype for btrfs_clear_buffer_dirty() is declared in both disk-io.h
and extent_io.h, but the function is defined at extent_io.c. So remove the
prototype declaration from disk-io.h.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
drm:
- fix uninit problems in crtc
- fix fd ownership check
- edid: add modes in fallback paths
panel:
- move LG panel into DSI yaml
- ltk050h3146w: set burst mode
mediatek:
- mtk_disp_gamma: Fix breakage due to merge issue
- fix kernel oops if no crtc is found
- Add spinlock for setting vblank event in atomic_begin
- Fix access violation in mtk_drm_crtc_dma_dev_get
i915:
- Fix selftest engine reset count storage for multi-tile
- Fix out-of-bounds reads for engine reset counts
- Fix ADL+ remapped stride with CCS
- Fix intel_atomic_setup_scalers() plane_state handling
- Fix ADL+ tiled plane stride when the POT stride is smaller than the original
- Fix eDP 1.4 rate select method link configuration
amdgpu:
- Fix suspend fix that got accidently mangled last week
- Fix OD regression
- PSR fixes
- OLED Backlight regression fix
- JPEG 4.0.5 fix
- Misc display fixes
- SDMA 5.2 fix
- SDMA 2.4 regression fix
- GPUVM race fix
nouveau:
- fix gk20a instobj hierarchy
- fix headless iors inheritance regression
ivpu:
- fix WA initialisation
-----BEGIN PGP SIGNATURE-----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=duFG
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-12-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"More regular fixes, amdgpu, i915, mediatek and nouveau are most of
them this week. Nothing too major, then a few misc bits and pieces in
core, panel and ivpu.
drm:
- fix uninit problems in crtc
- fix fd ownership check
- edid: add modes in fallback paths
panel:
- move LG panel into DSI yaml
- ltk050h3146w: set burst mode
mediatek:
- mtk_disp_gamma: Fix breakage due to merge issue
- fix kernel oops if no crtc is found
- Add spinlock for setting vblank event in atomic_begin
- Fix access violation in mtk_drm_crtc_dma_dev_get
i915:
- Fix selftest engine reset count storage for multi-tile
- Fix out-of-bounds reads for engine reset counts
- Fix ADL+ remapped stride with CCS
- Fix intel_atomic_setup_scalers() plane_state handling
- Fix ADL+ tiled plane stride when the POT stride is smaller than the original
- Fix eDP 1.4 rate select method link configuration
amdgpu:
- Fix suspend fix that got accidently mangled last week
- Fix OD regression
- PSR fixes
- OLED Backlight regression fix
- JPEG 4.0.5 fix
- Misc display fixes
- SDMA 5.2 fix
- SDMA 2.4 regression fix
- GPUVM race fix
nouveau:
- fix gk20a instobj hierarchy
- fix headless iors inheritance regression
ivpu:
- fix WA initialisation"
* tag 'drm-fixes-2023-12-15' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/nouveau/kms/nv50-: Don't allow inheritance of headless iors
drm/nouveau: Fixup gk20a instobj hierarchy
drm/amdgpu: warn when there are still mappings when a BO is destroyed v2
drm/amdgpu: fix tear down order in amdgpu_vm_pt_free
drm/amd: Fix a probing order problem on SDMA 2.4
drm/amdgpu/sdma5.2: add begin/end_use ring callbacks
drm/panel: ltk050h3146w: Set burst mode for ltk050h3148w
dt-bindings: panel-simple-dsi: move LG 5" HD TFT LCD panel into DSI yaml
drm/amd/display: Disable PSR-SU on Parade 0803 TCON again
drm/amd/display: Populate dtbclk from bounding box
drm/amd/display: Revert "Fix conversions between bytes and KB"
drm/amdgpu/jpeg: configure doorbell for each playback
drm/amd/display: Restore guard against default backlight value < 1 nit
drm/amd/display: fix hw rotated modes when PSR-SU is enabled
drm/amd/pm: fix pp_*clk_od typo
drm/amdgpu: fix buffer funcs setting order on suspend harder
drm/mediatek: Fix access violation in mtk_drm_crtc_dma_dev_get
drm/edid: also call add modes in EDID connector update fallback
drm/i915/edp: don't write to DP_LINK_BW_SET when using rate select
drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original
...
Add device IDs for the Brainboxes UC-203, UC-257, UC-414, UC-475,
IS-300/IS-500 and PX-263/PX-295 and define the relevant "geometry"
for the cards.
This patch requires part 1 of this series.
Cc: <stable@vger.kernel.org>
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/AS4PR02MB7903A4094564BE28F1F926A6C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
apply_alternatives() treats alternatives with the ALT_FLAG_NOT flag set
special as it optimizes the existing NOPs in place.
Unfortunately, this happens with interrupts enabled and does not provide any
form of core synchronization.
So an interrupt hitting in the middle of the update and using the affected code
path will observe a half updated NOP and crash and burn. The following
3 NOP sequence was observed to expose this crash halfway reliably under QEMU
32bit:
0x90 0x90 0x90
which is replaced by the optimized 3 byte NOP:
0x8d 0x76 0x00
So an interrupt can observe:
1) 0x90 0x90 0x90 nop nop nop
2) 0x8d 0x90 0x90 undefined
3) 0x8d 0x76 0x90 lea -0x70(%esi),%esi
4) 0x8d 0x76 0x00 lea 0x0(%esi),%esi
Where only #1 and #4 are true NOPs. The same problem exists for 64bit obviously.
Disable interrupts around this NOP optimization and invoke sync_core()
before re-enabling them.
Fixes: 270a69c448 ("x86/alternative: Support relocations in alternatives")
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com
text_poke_early() does:
local_irq_save(flags);
memcpy(addr, opcode, len);
local_irq_restore(flags);
sync_core();
That's not really correct because the synchronization should happen before
interrupts are re-enabled to ensure that a pending interrupt observes the
complete update of the opcodes.
It's not entirely clear whether the interrupt entry provides enough
serialization already, but moving the sync_core() invocation into interrupt
disabled region does no harm and is obviously correct.
Fixes: 6fffacb303 ("x86/alternatives, jumplabel: Use text_poke_early() before mm_init()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com
Chris reported that a Dell PowerEdge T340 system stopped to boot when upgrading
to a kernel which contains the parallel hotplug changes. Disabling parallel
hotplug on the kernel command line makes it boot again.
It turns out that the Dell BIOS has x2APIC enabled and the boot CPU comes up in
X2APIC mode, but the APs come up inconsistently in xAPIC mode.
Parallel hotplug requires that the upcoming CPU reads out its APIC ID from the
local APIC in order to map it to the Linux CPU number.
In this particular case the readout on the APs uses the MMIO mapped registers
because the BIOS failed to enable x2APIC mode. That readout results in a page
fault because the kernel does not have the APIC MMIO space mapped when X2APIC
mode was enabled by the BIOS on the boot CPU and the kernel switched to X2APIC
mode early. That page fault can't be handled on the upcoming CPU that early and
results in a silent boot failure.
If parallel hotplug is disabled the system boots because in that case the APIC
ID read is not required as the Linux CPU number is provided to the AP in the
smpboot control word. When the kernel uses x2APIC mode then the APs are
switched to x2APIC mode too slightly later in the bringup process, but there is
no reason to do it that late.
Cure the BIOS bogosity by checking in the parallel bootup path whether the
kernel uses x2APIC mode and if so switching over the APs to x2APIC mode before
the APIC ID readout.
Fixes: 0c7ffa32db ("x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it")
Reported-by: Chris Lindee <chris.lindee@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Chris Lindee <chris.lindee@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/CA%2B2tU59853R49EaU_tyvOZuOTDdcU0RshGyydccp9R1NX9bEeQ@mail.gmail.com
Remove double-mapping of DMA buffers as it can prevent page pool entries
from being freed. Mapping is managed by page pool infrastructure and
was previously managed by the driver in __bnxt_alloc_rx_page before
allowing the page pool infrastructure to manage it.
Fixes: 578fcfd26e ("bnxt_en: Let the page pool manage the DMA mapping")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20231214213138.98095-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon a closer inspection of the quota record scrubber, I noticed that
dqiterate wasn't actually walking all possible dquots for the mapped
blocks in the quota file. This is due to xfs_qm_dqget_next skipping all
XFS_IS_DQUOT_UNINITIALIZED dquots.
For a fsck program, we really want to look at all the dquots, even if
all counters and limits in the dquot record are zero. Rewrite the
implementation to do this, as well as switching to an iterator paradigm
to reduce the number of indirect calls.
This enables removal of the old broken dqiterate code from xfs_dquot.c.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
For each dquot resource, ensure either (a) the resource usage is over
the soft limit and there is a nonzero timer; or (b) usage is at or under
the soft limit and the timer is unset. (a) is redundant with the dquot
buffer verifier, but (b) isn't checked anywhere.
Found by fuzzing xfs/426 and noticing that diskdq.btimer = add didn't
trip any kind of warning for having a timer set even with no limits.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Each xfs_dquot object caches the file offset and daddr of the ondisk
block that backs the dquot. Make sure these cached values are the same
as the bmapi data, and that the block state is written.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix all the file metadata surrounding the realtime bitmap file, which
includes the rt geometry, file size, forks, and space mappings. The
bitmap contents themselves cannot be fixed without rt rmap, so that will
come later.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new helper to unmap blocks from an inode's fork.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a helper function to repair the core and forks of a metadata inode,
so that we can get move onto the task of repairing higher level metadata
that lives in an inode.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
XFS filesystems always have a realtime bitmap and summary file, even if
there has never been a realtime volume attached. Always check them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
I forgot that the xfs_mount tracks the size and number of levels in the
realtime summary file, and that the rt summary file can have more blocks
mapped to the data fork than m_rsumsize implies if growfsrt fails.
So. Add to the rtsummary scrubber an explicit check that all the
summary geometry values are correct, then adjust the rtsummary i_size
checks to allow for the growfsrt failure case. Finally, flag post-eof
blocks in the summary file.
While we're at it, split the extent map checking so that we only call
xfs_bmapi_read once per extent instead of once per rtsummary block.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
I forgot that the superblock tracks the number of blocks that are in the
realtime bitmap, and that the rt bitmap file can have more blocks mapped
to the data fork than sb_rbmblocks if growfsrt fails.
So. Add to the rtbitmap scrubber an explicit check that sb_rextents and
sb_rbmblocks are correct, then adjust the rtbitmap i_size checks to
allow for the growfsrt failure case. Finally, flag post-eof blocks in
the rtbitmap.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Try to repair errors that we see in file CoW forks so that we don't do
stupid things like remap garbage into a file. There's not a lot we can
do with the COW fork -- the ondisk metadata record only that the COW
staging extents are owned by the refcount btree, which effectively means
that we can't reconstruct this incore structure from scratch.
Actually, this is even worse -- we can't touch written extents, because
those map space that are actively under writeback, and there's not much
to do with delalloc reservations. Hence we can only detect crosslinked
unwritten extents and fix them by punching out the problematic parts and
replacing them with delalloc extents.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Implement ranged queries for refcount records. The next patch will use
this to scan refcount data.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are a couple of conditions that userspace can set to force repairs
of metadata. These really belong in the repair code and not open-coded
into the check code, so refactor them into a helper.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use the reverse-mapping btree information to rebuild an inode block map.
Update the btree bulk loading code as necessary to support inode rooted
btrees and fix some bitrot problems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
