The amdgpu_free_extended_power_table is called in every error-handling
paths of amdgpu_parse_extended_power_table. However, after the following
call chain of returning:
amdgpu_parse_extended_power_table
|-> kv_dpm_init / si_dpm_init
(the only two caller of amdgpu_parse_extended_power_table)
|-> kv_dpm_sw_init / si_dpm_sw_init
(the only caller of kv_dpm_init / si_dpm_init, accordingly)
|-> kv_dpm_fini / si_dpm_fini
(goto dpm_failed in xx_dpm_sw_init)
|-> amdgpu_free_extended_power_table
As above, the amdgpu_free_extended_power_table is called twice in this
returning chain and thus a double-free is triggered. Similarily, the
last kfree in amdgpu_parse_extended_power_table also cause a double free
with amdgpu_free_extended_power_table in kv_dpm_fini.
Fixes: 84176663e7 ("drm/amd/pm: create a new holder for those APIs used only by legacy ASICs(si/kv)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When radeon_bo_create and radeon_vm_clear_bo fail, the vm->page_tables
allocated before need to be freed. However, neither radeon_vm_init
itself nor its caller have done such deallocation.
Fixes: 6d2f2944e9 ("drm/radeon: use normal BOs for the page tables v4")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ps allocated by kzalloc equals to NULL, kv_parse_power_table
frees adev->pm.dpm.ps that allocated before. However, after the control
flow goes through the following call chains:
kv_parse_power_table
|-> kv_dpm_init
|-> kv_dpm_sw_init
|-> kv_dpm_fini
The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its
first free in kv_parse_power_table and causes a use-after-free bug.
Fixes: a2e73f56fa ("drm/amdgpu: Add support for CIK parts")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the allocation of
adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails,
amdgpu_free_extended_power_table is called to free some fields of adev.
However, when the control flow returns to si_dpm_sw_init, it goes to
label dpm_failed and calls si_dpm_fini, which calls
amdgpu_free_extended_power_table again and free those fields again. Thus
a double-free is triggered.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Should be -EOPNOTSUPP.
Fixes: 5104fdf50d ("drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create drm_color_ctm_3x4 to support 3x4-dimension plane CTM matrix and
convert DRM CTM to DC CSC float matrix.
v3:
- rename ctm2 to ctm_3x4 (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Map the plane CTM driver-specific property to DC plane, instead of DC
stream. The remaining steps to program DPP block are already implemented
on DC shared-code.
v3:
- fix comment about plane and CRTC CTMs priorities (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add power save mode workload for smu 13.0.10, so that in compute mode,
pmfw will add margin since some applications requres higher margin.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable vpe dpm
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Plane CTM for pre-blending color space conversion. Only enable
driver-specific plane CTM property on drivers that support both pre- and
post-blending gamut remap matrix, i.e., DCN3+ family. Otherwise it
conflits with DRM CRTC CTM property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When commiting planes, we copy color mgmt resources to the stream state.
Do the same for shaper and 3D LUTs.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pm supports return vpe clock table and soc clock table
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Li Ma <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Issue: during evict or validate happened on amdgpu_bo, the 'from' and
'to' is always same in ftrace event of amdgpu_bo_move
where calling the 'trace_amdgpu_bo_move', the comment says move_notify
is called before move happens, but actually it is called after move
happens, here the new_mem is same as bo->resource
Fix: move trace_amdgpu_bo_move from move_notify to amdgpu_bo_move
Signed-off-by: Wang, Beyond <Wang.Beyond@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to funnel the color caps through to these functions so it can check
that the hardware is capable.
v2:
- remove redundant color caps assignment on plane degamma map (Harry)
- pass color caps to degamma params
v3:
- remove unused color_caps parameter from set_color_properties (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Map plane blend properties to DPP blend gamma. Plane blend is a
post-3D LUT curve that linearizes color space for blending. It may be
defined by a user-blob LUT and/or predefined transfer function. As
hardcoded curve (ROM) is not supported on blend gamma, we use AMD color
module to fill parameters when setting non-linear TF with empty LUT.
v2:
- rename DRM TFs to AMDGPU TFs
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unlike degamma, blend gamma doesn't support hardcoded curve
(predefined/ROM), but we can use AMD color module to fill blend gamma
parameters when we have non-linear plane gamma TF without plane gamma
LUT. The regular degamma path doesn't hit this.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wire up DC 3D LUT to DM plane color management (pre-blending). On AMD
display HW, 3D LUT comes after a shaper curve and we always have to
program a shaper curve to delinearize or normalize the color space
before applying a 3D LUT (since we have a reduced number of LUT
entries).
In this version, the default values of 3D LUT for size and bit_depth are
17x17x17 and 12-bit, but we already provide here a more generic
mechanisms to program other supported values (9x9x9 size and 10-bit).
v2:
- started with plane 3D LUT instead of CRTC 3D LUT support
v4:
- lut3d_size is the max dimension size instead of # of entries
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to help modprobe load architecture specific modules so we don't
fall back to generic software implementations, this should help
performance when building as a module.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When bch2_fs_alloc() gets an error before calling
bch2_fs_btree_iter_init(), bch2_fs_btree_iter_exit() makes an invalid
memory access because btree_trans_list is uninitialized.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Fixes: 6bd68ec266 ("bcachefs: Heap allocate btree_trans")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-----BEGIN PGP SIGNATURE-----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=uF/Q
-----END PGP SIGNATURE-----
Merge tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Some fixes to quota accounting code, mostly around error handling and
correctness:
- free reserves on various error paths, after IO errors or
transaction abort
- don't clear reserved range at the folio release time, it'll be
properly cleared after final write
- fix integer overflow due to int used when passing around size of
freed reservations
- fix a regression in squota accounting that missed some cases with
delayed refs"
* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ensure releasing squota reserve on head refs
btrfs: don't clear qgroup reserved bit in release_folio
btrfs: free qgroup pertrans reserve on transaction abort
btrfs: fix qgroup_free_reserved_data int overflow
btrfs: free qgroup reserve when ORDERED_IOERR is set
By default, if Rust is passed `--target=foo` rather than a target.json
file, it will infer a default sysroot if that component is installed. As
the proposed aarch64 support [1] uses `aarch64-unknown-none` rather than a
target.json file, this is needed [2] to prevent rustc from being confused
between the custom kernel sysroot and the pre-installed one.
[ Miguel: Applied Boqun's extra case (for `rusttest`) and reworded to add
links to the arm64 patch series discussion. In addition, fixed the
`rustdoc` target too (which requires a conditional since `cmd_rustdoc`
is also used for host crates like `macros`). ]
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/rust-for-linux/20231020155056.3495121-1-Jamie.Cunliffe@arm.com/ [1]
Link: https://lore.kernel.org/rust-for-linux/CAGSQo01pOixiPXkW867h4vPUaAjtKtHGKhkV-rpifJvKxAf4Ww@mail.gmail.com/ [2]
Link: https://lore.kernel.org/r/20231031201752.1189213-1-mmaurer@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Traits marked with `#[vtable]` need to provide default implementations
for optional functions. The C side represents these with `NULL` in the
vtable, so the default functions are never actually called. We do not
want to replicate the default behavior from C in Rust, because that is
not maintainable. Therefore we should use `build_error` in those default
implementations. The error message for that is provided at
`kernel::error::VTABLE_DEFAULT_ERROR`.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20231026201855.1497680-1-benno.lossin@proton.me
[ Wrapped paragraph to 80 as requested and capitalized sentence. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Enable combining identifiers with literals in the 'paste!' macro. This
allows combining user-specified strings with affixes to create
namespaced identifiers.
This sample code:
macro_rules! m {
($name:lit) => {
paste!(struct [<_some_ $name _struct_>] {})
}
}
m!("foo_bar");
Would previously cause a compilation error. It will now generate:
struct _some_foo_bar_struct_ {}
Signed-off-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20231118013959.37384-1-tmgross@umich.edu
[ Added `:` before example block. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, for `const`s that bindgen doesn't recognise, we define a
helper constant with
const <TYPE> BINDINGS_<NAME> = <NAME>;
in `bindings_helper.h` and then we put
pub const <NAME>: <TYPE> = BINDINGS_<NAME>;
in `bindings/lib.rs`. This is fine since we currently only have 3
constants that are defined this way, but is going to be more annoying
when more constants are added since every new constant needs to be
defined in two places.
This patch changes the way we define constant helpers to
const <TYPE> RUST_CONST_HELPER_<NAME> = <NAME>;
and then use `sed` to postprocess Rust code generated by bindgen to
remove the distinct prefix, so users of the `bindings` crate can refer
to the name directly.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231104145700.2495176-1-gary@garyguo.net
[ Reworded for typos. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The KingFisher board has regulators for miniPCIe, so enable these
optional regulators using devm. devm will automatically disable them
when the driver releases the device. Order variables in reverse-xmas
while we are here.
[kwilczynski: update style to match rest of the code]
Link: https://lore.kernel.org/linux-pci/20231105092908.3792-3-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Support regulators found on the KingFisher board for miniPCIe (1.5 and
3.3v). For completeness, describe a 12v regulator while we are here.
Link: https://lore.kernel.org/linux-pci/20231105092908.3792-2-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform
bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h.
As a result, there's a pretty much random mix of those include files
used throughout the tree. In order to detangle these headers and replace
the implicit includes with struct declarations, users need to explicitly
include the correct includes.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231207165251.2855783-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
This is a Chinese TV box, probably very similar if not identical to
various other cheap TV boxes with the same specs:
- Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache)
- 2 or 4GiB DDR3L DRAM
- 32, 64, or 128 GiB eMMC flash
- AXP313a PMIC
- 100 Mbit/s Ethernet (using yet unsupported internal PHY)
- HDMI port
- 2 * USB 2.0 ports
- microSD card slot
- 3.5mm A/V port
- 7-segment display
- 5V barrel plug power supply
The PCB provides holes for soldering a UART header or cable, this is
connected to the debug UART0. UART1 is used for the Bluetooth chip,
although this isn't working yet.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231214015312.17363-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Transpeed 8K618-T TV box is a Chinese Android TV box, using the
Allwinner H618 SoC.
Add the board/SoC compatible string pair to the list of known boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231214015312.17363-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
This is a name used by some Chinese TV boxes, add it to the bindings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231214015312.17363-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add documentation for FW logging in
Documentation/networking/device_drivers/ethernet/intel/ice.rst
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Once logging is enabled the user should read the data from the 'data'
file. The data is in the form of a binary blob that can be sent to Intel
for decoding. To read the data use a command like:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data > log_data.bin
If the user wants to clear the FW log data that has been stored in the
driver then they can write any value to the 'data' file and that will clear
the data. An example is:
# echo 34 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data
In addition to being able to read the data the user can configure how
much memory is used to store FW log data. This allows the user to
increase/decrease the amount of memory based on the users situation.
The data is stored such that if the memory fills up then the oldest data
will get overwritten in a circular manner. To change the amount of
memory the user can write to the 'log_size' file like this:
# echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size
Where <value> is one of 128K, 256K, 512K, 1M, and 2M. The default value
is 1M.
The user can see the current value of 'log_size' by reading the file:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Once users have configured the FW logging then allow them to enable it
by writing to the 'fwlog/enable' file. The file accepts a boolean value
(0 or 1) where 1 means enable FW logging and 0 means disable FW logging.
# echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable
Where <value> is 0 or 1.
The user can read the 'fwlog/enable' file to see whether logging is
enabled or not. Reading the actual data is a separate patch. To see the
current value then:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Users want the ability to debug FW issues by retrieving the
FW logs from the E8xx devices. Use debugfs to allow the user to
configure the log level and number of messages for FW logging.
If FW logging is supported on the E8xx then the file 'fwlog' will be
created under the PCI device ID for the ice driver. If the file does not
exist then either the E8xx doesn't support FW logging or debugfs is not
enabled on the system.
One thing users want to do is control which events are reported. The
user can read and write the 'fwlog/modules/<module name>' to get/set
the log levels. Each module in the FW that supports logging ht as a file
under 'fwlog/modules' that supports reading (to see what the current log
level is) and writing (to change the log level).
The format to set the log levels for a module are:
# echo <log level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module>
The supported log levels are:
* none
* error
* warning
* normal
* verbose
Each level includes the messages from the previous/lower level
The modules that are supported are:
* general
* ctrl
* link
* link_topo
* dnl
* i2c
* sdp
* mdio
* adminq
* hdma
* lldp
* dcbx
* dcb
* xlr
* nvm
* auth
* vpd
* iosf
* parser
* sw
* scheduler
* txq
* rsvd
* post
* watchdog
* task_dispatch
* mng
* synce
* health
* tsdrv
* pfreg
* mdlver
* all
The module 'all' is a special module which allows the user to read or
write to all of the modules.
The following example command would set the DCB module to the 'normal'
log level:
# echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb
If the user wants to set the DCB, Link, and the AdminQ modules to
'verbose' then the commands are:
# echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb
# echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link
# echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/adminq
If the user wants to set all modules to the 'warning' level then the
command is:
# echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all
If the user wants to disable logging for a module then they can set the
level to 'none'. An example setting the 'watchdog' module is:
# echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/watchdog
If the user wants to see what the log level is for a specific module
then the command is:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb
This will return the log level for the DCB module. If the user wants to
see the log level for all the modules then the command is:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all
Writing to the module file will update the configuration, but NOT enable the
configuration (that is a separate command).
In addition to configuring the modules, the user can also configure the
number of log messages (nr_messages) to include in a single Admin Receive
Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128
means push only when the max AQ command buffer is full). The suggested
value is 10.
To see/change the resolution the user can read/write the
'fwlog/nr_messages' file. An example changing the value to 50 is
# echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages
To see the current value of 'nr_messages' then the command is:
# cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously, the block size always equaled to PAGE_SIZE, therefore
`lclusterbits` couldn't be less than 12.
Since sub-page compressed blocks are now considered, `lobits` for
a lcluster in each pack cannot always be `lclusterbits` as before.
Otherwise, there is no enough room for the special value
`Z_EROFS_LI_D0_CBLKCNT`.
To support smaller block sizes, `lobits` for each compacted lcluster is
now calculated as:
lobits = max(lclusterbits, ilog2(Z_EROFS_LI_D0_CBLKCNT) + 1)
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206091057.87027-4-hsiangkao@linux.alibaba.com
Currently, compressed sizes are recorded in pages using `pclusterpages`,
However, for tailpacking pclusters, `tailpacking_size` is used instead.
This approach doesn't work when dealing with sub-page blocks. To address
this, let's switch them to the unified `pclustersize` in bytes.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206091057.87027-3-hsiangkao@linux.alibaba.com
Add a basic I/O submission path first to support sub-page blocks:
- Temporary short-lived pages will be used entirely;
- In-place I/O pages can be used partially, but compressed pages need
to be able to be mapped in contiguous virtual memory.
As a start, currently cache decompression is explicitly disabled for
sub-page blocks, which will be supported in the future.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206091057.87027-2-hsiangkao@linux.alibaba.com
The FW logging code doesn't work because there is no way to set
cq_ena or uart_ena so remove the code. This code is the original
(v1) way of FW logging so it should be replaced with the v2 way.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Switch to the modern style of printing kernel messages. Use %u instead
of %d to print unsigned integers.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231213194702.90381-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The pm_runtime_enable function increases the power disable depth,
which means that we must perform a matching decrement on the error
handling path to maintain balance within the given context.
Additionally, we need to address the same issue for pm_runtime_get_sync.
We fix this by invoking pm_runtime_disable and pm_runtime_put_sync
when error returns.
Fixes: 82b81b3ec1 ("drm/tegra: dpaux: Implement runtime PM")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_B13DB7F6C0023C46157250A524966F326A09@qq.com
Add BSEC support to STM32MP25 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
