Correct spellos reported by codespell.
Fix some grammar (as 's' to a few words).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213044107.29214-1-rdunlap@infradead.org
Fix spelling problems as identified by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213043226.10046-1-rdunlap@infradead.org
Correct spelling mistakes that were identified by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213043925.13852-1-rdunlap@infradead.org
On the error path of device_add_disk(), device's memalloc_noio flag was
set but not cleared. As the comment of pm_runtime_set_memalloc_noio(),
"The function should be called between device_add() and device_del()".
Clear this flag before device_del() now.
Fixes: 25e823c8c3 ("block/genhd.c: apply pm_runtime_set_memalloc_noio on block devices")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231211075356.1839282-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since "dev_search_path" can technically be as large as PATH_MAX,
there was a risk of truncation when copying it and a second string
into "full_path" since it was also PATH_MAX sized. The W=1 builds were
reporting this warning:
drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra':
drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~
In function 'rnbd_srv_get_full_path',
inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
617 | dev_search_path, dev_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
To fix this, unconditionally check for truncation (as was already done
for the case where "%SESSNAME%" was present).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100355.lHoJPgKy-lkp@intel.com/
Cc: Md. Haris Iqbal <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <linux-block@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the Series AXE GPU node to the AM62 device tree.
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Acked-by: Darren Etheridge <detheridge@ti.com>
Link: https://lore.kernel.org/r/7088cc032374ae517191b1dadf5bb5f0440eac81.1701773390.git.donald.robson@imgtec.com
Signed-off-by: Nishanth Menon <nm@ti.com>
QCM2290 has a single BWMONv4 intance for CPU. Document it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-3-4cbb567743bb@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
As I am familiar with all the details of vop2 display
architecture, I can help review and test all related
changes in this subsystem, so add my email here to make
sure I get CC'd on rockchip drm changes.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211120023.1785687-1-andyshrk@163.com
VOP2 has multiple independent video ports with different
feature, so rename VOP_FEATURE_OUTPUT_10BIT to
VOP2_VP_FEATURE_OUTPUT_10BIT for more clearly meaning.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115931.1785495-1-andyshrk@163.com
VOP2 on rk3588:
Four video ports:
VP0 Max 4096x2160
VP1 Max 4096x2160
VP2 Max 4096x2160
VP3 Max 2048x1080
4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
4 4K Esmart windows with line RGB/YUV support
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115919.1785435-1-andyshrk@163.com
The vop2 on rk3588 is similar to which on rk356x
but with 4 video ports and need to reference
more grf modules.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115850.1785311-1-andyshrk@163.com
The vop2 need to reference more grf(system grf, vop grf, vo0/1 grf,etc)
in the upcoming rk3588.
So we rename the current system grf to sys_grf.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115826.1785190-1-andyshrk@163.com
We need to setup background delay cycle and prescan
delay cycle when a mode is enable to avoid trigger
POST_BUF_EMPTY irq on rk3588.
Note: RK356x has no such requirement.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115815.1785131-1-andyshrk@163.com
The write mask bit is used to make sure when writing
config done bit for one VP will not overwrite the other.
Unfortunately, the write mask bit is missing on
rk3566/8, that means when we write to these bits,
it will not take any effect.
We need this to make the vop work properly after
rk3566/8 variants.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115752.1785013-1-andyshrk@163.com
The enable bit and transform offset of cluster windows should be
cleared when it work at linear mode, or we may have a iommu fault
issue on rk3588 which cluster windows switch between afbc and linear
mode.
As the cluster windows of rk3568 only supports afbc format
so is therefore not affected.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115741.1784954-1-andyshrk@163.com
At first we thought the half_block_en bit in AFBCD_CTRL register
only work in afbc mode. But the fact is that it control the line
buffer in all mode(afbc/tile/linear), so we need configure it in
all case.
As the cluster windows of rk3568 only supports afbc format
so is therefore not affected.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115730.1784893-1-andyshrk@163.com
This reverts commit b63a553e8f.
regcache_sync will try to reload the configuration in regcache to
hardware, but the registers of 4 Cluster windows and Esmart1/2/3 on
the upcoming rk3588 can not be set successfully before internal PD
power on.
Also it's better to keep the hardware register as it is before we really
enable it.
So let's revert this version, and keep the first version:
commit afa965a45e ("drm/rockchip: vop2: fix suspend/resume")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115719.1784834-1-andyshrk@163.com
The output interface related definition can shared between
vop and vop2, move them to rockchip_drm_drv.h can avoid duplicated
definition.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115627.1784735-1-andyshrk@163.com
Add overlay to enable the PCIE1 instance of PCIe on J721S2-EVM in
Endpoint mode of operation.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20231211115535.1264353-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add overlay to enable the PCIE0 instance of PCIe on J721E-EVM in
Endpoint mode of operation.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20231211115535.1264353-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This patch adds support for TPS6594 PMIC family on wakeup I2C0 bus.
These devices provide regulators (bucks and LDOs), but also GPIOs, a
RTC, a watchdog, an ESM (Error Signal Monitor) which monitors the SoC
error output signal, and a PFSM (Pre-configurable Finite State Machine)
which manages the operational modes of the PMIC.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231208114919.3429562-7-n-francis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This patch adds support for TPS6594 PMIC on wkup I2C0 bus. This device
provides regulators (bucks and LDOs), but also GPIOs, a RTC, a watchdog,
an ESM (Error Signal Monitor) which monitors the SoC error output
signal, and a PFSM (Pre-configurable Finite State Machine) which manages
the operational modes of the PMIC.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231208114919.3429562-6-n-francis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This patch adds support for TPS6593 PMIC on wkup I2C0 bus.
This device provides regulators (bucks and LDOs), but also
GPIOs, a RTC, a watchdog, an ESM (Error Signal Monitor)
which monitors the SoC error output signal, and a PFSM
(Pre-configurable Finite State Machine) which manages the
operational modes of the PMIC.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231208114919.3429562-5-n-francis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This patch adds support for TPS6594 PMIC family on wakup I2C0 bus.
Theses devices provides regulators (bucks and LDOs), but also
GPIOs, a RTC, a watchdog, an ESM (Error Signal Monitor)
which monitors the SoC error output signal, and a PFSM
(Pre-configurable Finite State Machine) which manages the
operational modes of the PMIC.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231208114919.3429562-4-n-francis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This patch adds support for TPS6594 PMIC family on wakup I2C0 bus.
Theses devices provides regulators (bucks and LDOs), but also
GPIOs, a RTC, a watchdog, an ESM (Error Signal Monitor)
which monitors the SoC error output signal, and a PFSM
(Pre-configurable Finite State Machine) which manages the
operational modes of the PMIC.
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231208114919.3429562-3-n-francis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This patch adds support for TPS6594 PMIC family on wakup I2C0 bus.
Theses devices provides regulators (bucks and LDOs), but also
GPIOs, a RTC, a watchdog, an ESM (Error Signal Monitor)
which monitors the SoC error output signal, and a PFSM
(Pre-configurable Finite State Machine) which manages the
operational modes of the PMIC.
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Reid Tonking <reidt@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231208114919.3429562-2-n-francis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Remove Intel Thunder Bay specific code as the product got cancelled and
there are no end customers or users.
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231213060836.29203-3-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove Intel Thunder Bay specific code as the product got cancelled and
there are no end customers or users.
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20231213060836.29203-2-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clear and set pattern is commonly used for accessing PCI config,
move the helper pci_clear_and_set_dword() from aspm.c into PCI header.
In addition, rename to pci_clear_and_set_config_dword() to retain the
"config" information and match the other accessors.
No functional change intended.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-4-xueshuai@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
The Alibaba Vendor ID (0x1ded) is now used by Alibaba elasticRDMA ("erdma")
and will be shared with the upcoming PCIe PMU ("dwc_pcie_pmu"). Move the
Vendor ID to linux/pci_ids.h so that it can shared by several drivers
later.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-3-xueshuai@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
Alibaba's T-Head Yitan 710 SoC includes Synopsys' DesignWare Core PCIe
controller which implements PMU for performance and functional debugging to
facilitate system maintenance.
Document it to provide guidance on how to use it.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-2-xueshuai@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
Initially the check against the get_temp ops in the
thermal_zone_device_update() was put in there in order to catch
drivers not providing this method.
Instead of checking again and again the function if the ops exists in
the update function, let's do the check at registration time, so it is
checked one time and for all.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add allocation of DPB buffers based on MFC requirement so,
codec buffers allocations has been moved after state
MFCINST_HEAD_PRODUCED. It is taken care that codec buffer allocation
is performed in process context from userspace IOCTL call.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In MFCv12, some section of firmware gets updated at each MFC run.
Hence we need to reload original firmware for each run at the start.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Context bit is set for hardware execution if there is a buffer in
source and destination queue before calling try_run in the
init_buffers function. Now there will be a new context created and
hardware will be invoked for the buffer queued instead of waiting for
another buffer to be queued from userspace to set this context bit for
hw execution.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
MFC driver had restriction on max resolution of 1080p, updated it for
UHD. Added corresponding support to set recommended profile and level
for H264 in UHD scenario.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In MFCv12, the rc configs are changed with support for CBR loose,
CBR tight and Variable Bitrate (VBR) added.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
YV12 and I420 format (3-plane) support is added. Stride information is
added to all formats and planes since it is necessary for YV12/I420
which are different from width.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for MFCv12, with a new register file and necessary hw
control, decoder, encoder and structural changes. Add luma dbp, chroma
dpb and mv sizes for each codec as per the UM for MFCv12, along with
appropriate alignment.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Renames macro IS_MFCV10 to IS_MFCV10_PLUS so that the MFCv10 code can
be resued for MFCv12 support. Since some part of MFCv10 specific code
holds good for MFCv12 also.
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smithatmurthy@gmail.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
