A recent bug made me look at Microsoft's i2c-hid docs again
and I noticed the following:
"""
4. Issue a RESET (Host Initiated Reset) to the Device.
5. Retrieve report descriptor from the device.
Note: Steps 4 and 5 may be done in parallel to optimize for time on I²C.
Since report descriptors are (a) static and (b) quite long, Windows 8 may
issue a request for 5 while it is waiting for a response from the device
on 4.
"""
Which made me think that maybe on some touchpads the reset ack is delayed
till after the report descriptor is read ?
Testing a T-BAO Tbook Air 12.5 with a 0911:5288 (SIPODEV SP1064?) touchpad,
for which the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk was first introduced,
shows that reading the report descriptor before waiting for the reset
helps with the missing reset IRQ. Now the reset does get acked properly,
but the ack sometimes still does not happen unfortunately.
Still moving the wait for ack to after reading the report-descriptor,
is probably a good idea, both to make i2c-hid's behavior closer to
Windows as well as to speed up probing i2c-hid devices.
While at it drop the dbg_hid() for a malloc failure, malloc failures
already get logged extensively by malloc itself.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2247751
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Switch i2c_hid_parse() to goto style error handling.
This is a preparation patch for removing the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET by making i2c-hid behave
more like Windows.
Note this changes the descriptor read error path to propagate
the actual i2c_hid_read_register() error code (which is always
negative) instead of hardcoding a -EIO return.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Split i2c_hid_hwreset() into:
i2c_hid_start_hwreset() which sends the PWR_ON and reset commands; and
i2c_hid_finish_hwreset() which actually waits for the reset to complete.
This is a preparation patch for removing the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET by making i2c-hid behave
more like Windows.
No functional changes intended.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
i2c_hid_hwreset() is the only caller of i2c_hid_execute_reset(),
fold the latter into the former.
This is a preparation patch for removing the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET by making i2c-hid behave
more like Windows.
No functional changes intended.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
For every ishtp client driver during initialization state, the flow is:
1 - Allocate an ISHTP client instance
2 - Reserve a host id and link the client instance
3 - Search a firmware client using UUID and get related
client information
4 - Bind firmware client id to the ISHTP client instance
5 - Set the state the ISHTP client instance to CONNECTING
6 - Send connect request to firmware
7 - Register event callback for messages from the firmware
During deinitizalization state, the flow is:
9 - Set the state the ISHTP client instance to ISHTP_CL_DISCONNECTING
10 - Issue disconnect request to firmware
11 - Unlike the client instance
12 - Flush message queue
13 - Free ISHTP client instance
Step 2-7 are identical to the steps of client driver initialization
and driver reset flow, but reallocation of the RX/TX ring buffers
can be avoided in reset flow.
Also for step 9-12, they are identical to the steps of client driver
failure handling after connect request, driver reset flow and
driver removing.
So, add two helper functions to simplify client driver code.
ishtp_cl_establish_connection()
ishtp_cl_destroy_connection()
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function,
then a timestamp is stored from a packet in a field of skb object,
which is not allocated at the moment of the call (skb == NULL).
Generalize aq_ptp_extract_ts and other affected functions so they don't
work with struct sk_buff*, but with struct skb_shared_hwtstamps*.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Fixes: 26efaef759 ("net: atlantic: Implement xdp data plane")
Signed-off-by: Daniil Maximov <daniil31415it@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tegra186_mc_client_sid_override() is protected under CONFIG_IOMMU_API.
Call to this function is being made from tegra186_mc_resume() without
any protection which is leading to build failure when CONFIG_IOMMU_API
is not set. Fix this by protecting SID override function call from
tegra186_mc_resume() under CONFIG_IOMMU_API.
Fixes: fe3b082a6e ("memory: tegra: Add SID override programming for MC clients")
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231205060045.7985-1-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
A refcount issue can appeared in __fwnode_link_del() due to the
pr_debug() call:
WARNING: CPU: 0 PID: 901 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110
Call Trace:
<TASK>
...
of_node_get+0x1e/0x30
of_fwnode_get+0x28/0x40
fwnode_full_name_string+0x34/0x90
fwnode_string+0xdb/0x140
...
vsnprintf+0x17b/0x630
...
__fwnode_link_del+0x25/0xa0
fwnode_links_purge+0x39/0xb0
of_node_release+0xd9/0x180
...
Indeed, an fwnode (of_node) is being destroyed and so, of_node_release()
is called because the of_node refcount reached 0.
From of_node_release() several function calls are done and lead to
a pr_debug() calls with %pfwf to print the fwnode full name.
The issue is not present if we change %pfwf to %pfwP.
To print the full name, %pfwf iterates over the current node and its
parents and obtain/drop a reference to all nodes involved.
In order to allow to print the full name (%pfwf) of a node while it is
being destroyed, do not obtain/drop a reference to this current node.
Fixes: a92eb7621b ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20231114152655.409331-1-herve.codina@bootlin.com
Invoke drm_plane_helper_funcs.end_fb_access before
drm_atomic_helper_commit_hw_done(). The latter function hands over
ownership of the plane state to the following commit, which might
free it. Releasing resources in end_fb_access then operates on undefined
state. This bug has been observed with non-blocking commits when they
are being queued up quickly.
Here is an example stack trace from the bug report. The plane state has
been free'd already, so the pages for drm_gem_fb_vunmap() are gone.
Unable to handle kernel paging request at virtual address 0000000100000049
[...]
drm_gem_fb_vunmap+0x18/0x74
drm_gem_end_shadow_fb_access+0x1c/0x2c
drm_atomic_helper_cleanup_planes+0x58/0xd8
drm_atomic_helper_commit_tail+0x90/0xa0
commit_tail+0x15c/0x188
commit_work+0x14/0x20
Fix this by running end_fb_access immediately after updating all planes
in drm_atomic_helper_commit_planes(). The existing clean-up helper
drm_atomic_helper_cleanup_planes() now only handles cleanup_fb.
For aborted commits, roll back from drm_atomic_helper_prepare_planes()
in the new helper drm_atomic_helper_unprepare_planes(). This case is
different from regular cleanup, as we have to release the new state;
regular cleanup releases the old state. The new helper also invokes
cleanup_fb for all planes.
The changes mostly involve DRM's atomic helpers. Only two drivers, i915
and nouveau, implement their own commit function. Update them to invoke
drm_atomic_helper_unprepare_planes(). Drivers with custom commit_tail
function do not require changes.
v4:
* fix documentation (kernel test robot)
v3:
* add drm_atomic_helper_unprepare_planes() for rolling back
* use correct state for end_fb_access
v2:
* fix test in drm_atomic_helper_cleanup_planes()
Reported-by: Alyssa Ross <hi@alyssa.is>
Closes: https://lore.kernel.org/dri-devel/87leazm0ya.fsf@alyssa.is/
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Fixes: 94d879eaf7 ("drm/atomic-helper: Add {begin,end}_fb_access to plane helpers")
Tested-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20231204083247.22006-1-tzimmermann@suse.de
The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Kelly Kane <kelly@hawknetworks.com>
Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
JEDEC standard JESD84-B51 defines the eMMC Data Strobe line, which is
currently used only in HS400 mode, as a device->host clock signal that
"is used only in read operation. The Data Strobe is always High-Z (not
driven by the device and pulled down by RDS) or Driven Low in write
operation, except during CRC status response." RDS is a pull-down
resistor specified in the 10K-100K ohm range. Thus per the standard, the
Data Strobe is always pulled to ground (by the eMMC and/or RDS) during
write operations.
Evidently, the eMMC host controller in the RK3588 considers an active
voltage on the eMMC-DS line during a write to be an error.
The default (i.e. hardware reset, and Rockchip BSP) behavior for the
RK3588 is to activate the eMMC-DS pin's builtin pull-down. As a result,
many RK3588 board designers do not bother adding a dedicated RDS
resistor, instead relying on the RK3588's internal bias. The current
devicetree, however, disables this bias (`pcfg_pull_none`), breaking
HS400-mode writes for boards without a dedicated RDS, but with an eMMC
chip that chooses to High-Z (instead of drive-low) the eMMC-DS line.
(The Turing RK1 is one such board.)
Fix this by changing the bias in the (common) emmc_data_strobe case to
reflect the expected hardware/BSP behavior. This is unlikely to cause
regressions elsewhere: the pull-down is only relevant for High-Z eMMCs,
and if this is redundant with a (dedicated) RDS resistor, the effective
result is only a lower resistance to ground -- where the range of
tolerance is quite high. If it does, it's better fixed in the specific
devicetrees.
Fixes: d85f8a5c79 ("arm64: dts: rockchip: Add rk3588 pinctrl data")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231205202900.4617-2-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-9-tzimmermann@suse.de
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-8-tzimmermann@suse.de
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-7-tzimmermann@suse.de
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-6-tzimmermann@suse.de
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-5-tzimmermann@suse.de
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-4-tzimmermann@suse.de
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-3-tzimmermann@suse.de
The udl driver is the only caller of drm_plane_helper_atomic_check().
Move the function into the driver. No functional changes.
v2:
* fix documenation (Sui)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-2-tzimmermann@suse.de
Per imx23-clock.yaml and imx28-clock.yaml, fsl,clkctrl is not a valid
compatible string.
Remove it to fix the following dt-schema warning:
imx28-evk.dtb: clkctrl@80040000: compatible: ['fsl,imx28-clkctrl', 'fsl,clkctrl'] is too long
from schema $id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
JESD216 mentions die erase, but does not provide an opcode for it.
Check BFPT dword 11, bits 30:24, "Chip Erase, Typical time", it says:
"Typical time to erase one chip (die). User must poll device busy to
determine if the operation has completed. For a device consisting of
multiple dies, that are individually accessed, the time is for each die
to which a chip erase command is applied."
So when a flash consists of a single die, this is the erase time for the
full chip (die) erase, and when it consists of multiple dies, it's the
die erase time. Chip and die are the same thing.
Add support for die erase. For now, benefit of the die erase when addr
and len are aligned with die size. This could be improved however for
the uniform and non-uniform erases cases to use the die erase when
possible. For example if one requests that an erase of a 2 die device
starting from the last 64KB of the first die to the end of the flash
size, we could use just 2 commands, a 64KB erase and a die erase.
This improvement is left as an exercise for the reader.
Tested-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20231125123529.55686-2-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Per root-node.yaml, 'model' is a required property.
Pass it to fix the following dt-schema warning:
imx28-xea.dtb: /: 'model' is a required property
from schema $id: http://devicetree.org/schemas/root-node.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 445ae16ac1 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On sc7280 there are two clk bits for WB2: vbif_cli and clk_ctrl. While
programming the VBIF params of WB, the driver should be toggling the
former bit, while the sc7180_mdp, sc7280_mdp and sm8250_mdp structs
list the latter one.
Correct that to ensure proper programming sequence for WB2 on these
platforms.
Fixes: 255f056181 ("drm/msm/dpu: sc7180: add missing WB2 clock control")
Fixes: 3ce1663805 ("drm/msm/dpu: add writeback support for sc7280")
Fixes: 53324b99bd ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Paloma Arellano <quic_parellan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570185/
Link: https://lore.kernel.org/r/20231203002437.1291595-1-dmitry.baryshkov@linaro.org
Remove CONFIG_DRM_LEGACY from Kconfig. Nothing depends on the option.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-15-tzimmermann@suse.de
The AGP subsystem supports a user-space interface via /dev/agpgart. It
is only enabled with DRM support for mode setting in user space. (i.e.,
CONFIG_DRM_LEGACY). All of that DRM code has been removed and the option
will go away. Hence remove the AGP frontend.
Modern DRM drivers with kernel mode setting handle AGP support internally.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-14-tzimmermann@suse.de
Remove all remaining source code for non-KMS drivers. These drivers
have been removed in v6.3 and won't comeback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-13-tzimmermann@suse.de
Modern DRM drivers acquire ioctl locks by themselves. Legacy ioctls
for user-space mode setting used to acquire drm_global_mutex. After
removing the ioctl entry points, also remove the locking code. The only
legacy ioctl without global locking was VBLANK_WAIT, which has been
removed as well. Hence remove the related DRM_UNLOCKED flag.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-12-tzimmermann@suse.de
Remove all hooks and calls into code for user-space mode setting from
the DRM core. Without the drivers and ioctl entry points, none of this
is required any longer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-11-tzimmermann@suse.de
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
Invoking DRM_IOCTL_MODESET_CTL is different from the other legacy
ioctl ops as it returns 0 even without CONFIG_DRM_LEGACY set. From the
original commit 29935554b3 ("drm: Disallow DRM_IOCTL_MODESET_CTL for
KMS drivers") it is not apparent how or why the operation differs from
the others. It is likely just an oversight in commit 61ae227032
("drm: allow removal of legacy codepaths (v4.1)"), which allowed
disabling leagacy ioctls in the first place. Still keep this removal
separate from the other ioctls to allow an easy revert, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/111602/ # [1]
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-10-tzimmermann@suse.de
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
This has already been the behavior for kernels without CONFIG_DRM_LEGACY
set.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/111602/ # [1]
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-9-tzimmermann@suse.de
Including <drm/drm_legacy.h> is not required by radeon.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-8-tzimmermann@suse.de
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>,
which will be removed. Include drm_auth.h directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-6-tzimmermann@suse.de
In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.
This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>,
which will be removed. Include drm_auth.h directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-5-tzimmermann@suse.de
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>,
which will be removed. Include drm_auth.h directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-4-tzimmermann@suse.de
Non-KMS drivers have been removed from DRM. Update the TODO list
accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a276afc19e ("drm: Remove some obsolete drm pciids(tdfx, mga, i810, savage, r128, sis, via)")
Cc: Cai Huoqing <cai.huoqing@linux.dev>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.3+
Cc: linux-doc@vger.kernel.org
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-3-tzimmermann@suse.de
devm_of_clk_add_hw_provider() may return an errno, so
add a return value check
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8410e7f3b3 ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The timer nodes declare compatibility with "fsl,imx6sx-gpt", which
itself is compatible with "fsl,imx6dl-gpt". Switch the fallback
compatible from "fsl,imx6sx-gpt" to "fsl,imx6dl-gpt".
Fixes: 9496734502 ("ARM: dts: add imx7d soc dtsi file")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The MAINTAINERS entry's F: currently only matches the 32-bit device trees,
as commit 724ba67515 ("ARM: dts: Move .dts files to vendor sub-directories")
inadvertently dropped the 64-bit DT match when it added the 32 bit
matches. The entry has a N: imx, which reduced the impact a bit, but
still some board device trees may not contain the substring and would
thus not be covered by the entry.
Reinstate the missing F: line to restore previous behavior.
Fixes: 724ba67515 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make sure that the wifi regulator is always on. The wifi driver itself
puts the wifi module into suspend mode. If we cut the power the driver
will crash when resuming from suspend.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: ad0de4ceb7 ("arm64: dts: freescale: add initial apalis imx8 aka quadmax module support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Release the id allocated in 'mmdc_pmu_init' when 'devm_kasprintf'
return NULL
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes: e76bdfd740 ("ARM: imx: Added perf functionality to mmdc driver")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
