Add multiple device tree nodes in order to support
runtime pinmuxing via debugfs.
All nodes are added to the pinctrl device node,
since they are now belonging to multiple interfaces now.
Note: Pinconf is also handled by debugfs-pinmux. This is possible since
pinconf and pinmux accessing the same 32-Bit register and setting the
function mask to 32-Bit allows writes to the whole register.
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
[Jan: fix node name style]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/3f90f3e521758622aa9b10f030cf0de1e68e77a4.1699087938.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
DSS irq trigger type is set to IRQ_TYPE_EDGE_RISING in the DT file, but
the TRM says it is level triggered.
For some reason triggering on rising edge results in double the amount
of expected interrupts, e.g. for normal page flipping test the number of
interrupts per second is 2 * fps. It is as if the IRQ triggers on both
edges. There are no other side effects to this issue than slightly
increased CPU & power consumption due to the extra interrupt.
Switching to IRQ_TYPE_LEVEL_HIGH is correct and fixes the issue, so
let's do that.
Fixes: fc539b90ed ("arm64: dts: ti: am654: Add DSS node")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231106-am65-dss-clk-edge-v1-1-4a959fec0e1e@ideasonboard.com
Signed-off-by: Nishanth Menon <nm@ti.com>
{planes,vrr}_{enabling,disabling}() are supposed to indicate
whether the specific hardware feature is supposed to be enabling
or disabling. That can only makes sense if the pipe is active
overall. So check for that before we go poking at the hardware.
I think we're semi-safe currently on due to:
- intel_pre_plane_update() doesn't get called when the pipe
was not-active prior to the commit, but this is actually a bug.
This saves vrr_disabling(), and vrr_enabling() is called from
deeper down where we have already checked hw.active.
- active_planes mirrors the crtc's hw.active
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-2-ville.syrjala@linux.intel.com
(cherry picked from commit bc53c4d56e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pedro Tammela says:
====================
selftests: tc-testing: more tdc updates
Follow-up on a feedback from Jakub and random cleanups from related
net/sched patches
====================
Link: https://lore.kernel.org/r/20231129222424.910148-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove this generic file and move the tests to their appropriate files
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231129222424.910148-5-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All tests in this file pertain to flower, so name it appropriately
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231129222424.910148-4-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tests using DEV2 should not be run in a dedicated net namespace,
and in parallel, as this device cannot be shared.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231129222424.910148-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To increase the chances of people finding the rendered docs
add a link to specs.rst and index.rst.
Add a label in the generated index.rst and while at it adjust
the title a little bit.
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231129041427.2763074-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add PCI Endpoint NIC support for Octeon CN98 devices.
CN98 devices are part of Octeon 9 family products with
similar PCI NIC characteristics to CN93, already supported
driver.
Add CN98 card to the device id table, as well
as support differences in the register fields and
certain usage scenarios such as unload.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231129045348.2538843-3-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Device unload control net function should inform firmware
of driver unload to let it take necessary actions to cleanup.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231129045348.2538843-2-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BYTES_PER_KBIT is defined in units.h, use that definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231128174813.394462-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the phy reset sequence is as shown below for a
devicetree described mdio phy on boot:
1. Assert the phy_device's reset as part of registering
2. Deassert the phy_device's reset as part of registering
3. Deassert the phy_device's reset as part of phy_probe
4. Deassert the phy_device's reset as part of phy_hw_init
The extra two deasserts include waiting the deassert delay afterwards,
which is adding unnecessary delay.
This applies to both possible types of resets (reset controller
reference and a reset gpio) that can be used.
Here's some snipped tracing output using the following command line
params "trace_event=gpio:* trace_options=stacktrace" illustrating
the reset handling and where its coming from:
/* Assert */
systemd-udevd-283 [002] ..... 6.780434: gpio_value: 544 set 0
systemd-udevd-283 [002] ..... 6.783849: <stack trace>
=> gpiod_set_raw_value_commit
=> gpiod_set_value_nocheck
=> gpiod_set_value_cansleep
=> mdio_device_reset
=> mdiobus_register_device
=> phy_device_register
=> fwnode_mdiobus_phy_device_register
=> fwnode_mdiobus_register_phy
=> __of_mdiobus_register
=> stmmac_mdio_register
=> stmmac_dvr_probe
=> stmmac_pltfr_probe
=> devm_stmmac_pltfr_probe
=> qcom_ethqos_probe
=> platform_probe
/* Deassert */
systemd-udevd-283 [002] ..... 6.802480: gpio_value: 544 set 1
systemd-udevd-283 [002] ..... 6.805886: <stack trace>
=> gpiod_set_raw_value_commit
=> gpiod_set_value_nocheck
=> gpiod_set_value_cansleep
=> mdio_device_reset
=> phy_device_register
=> fwnode_mdiobus_phy_device_register
=> fwnode_mdiobus_register_phy
=> __of_mdiobus_register
=> stmmac_mdio_register
=> stmmac_dvr_probe
=> stmmac_pltfr_probe
=> devm_stmmac_pltfr_probe
=> qcom_ethqos_probe
=> platform_probe
/* Deassert */
systemd-udevd-283 [002] ..... 6.882601: gpio_value: 544 set 1
systemd-udevd-283 [002] ..... 6.886014: <stack trace>
=> gpiod_set_raw_value_commit
=> gpiod_set_value_nocheck
=> gpiod_set_value_cansleep
=> mdio_device_reset
=> phy_probe
=> really_probe
=> __driver_probe_device
=> driver_probe_device
=> __device_attach_driver
=> bus_for_each_drv
=> __device_attach
=> device_initial_probe
=> bus_probe_device
=> device_add
=> phy_device_register
=> fwnode_mdiobus_phy_device_register
=> fwnode_mdiobus_register_phy
=> __of_mdiobus_register
=> stmmac_mdio_register
=> stmmac_dvr_probe
=> stmmac_pltfr_probe
=> devm_stmmac_pltfr_probe
=> qcom_ethqos_probe
=> platform_probe
/* Deassert */
NetworkManager-477 [000] ..... 7.023144: gpio_value: 544 set 1
NetworkManager-477 [000] ..... 7.026596: <stack trace>
=> gpiod_set_raw_value_commit
=> gpiod_set_value_nocheck
=> gpiod_set_value_cansleep
=> mdio_device_reset
=> phy_init_hw
=> phy_attach_direct
=> phylink_fwnode_phy_connect
=> __stmmac_open
=> stmmac_open
There's a lot of paths where the device is getting its reset
asserted and deasserted. Let's track the state and only actually
do the assert/deassert when it changes.
Reported-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231127-net-phy-reset-once-v2-1-448e8658779e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While doing some code cleanup in drivers/bus/, I noticed that the files
drivers/bus/omap*.[ch] have no maintainer.
As far as I see from the git history, important changes to those files went
through Tony Lindgren. Further, the inclusion of those drivers depend on
the config ARCH_OMAP2PLUS being enabled. This suggests these drivers are
part of the section OMAP2+ SUPPORT.
Add the omap bus drivers to OMAP2+ SUPPORT.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Message-ID: <20231115104434.25796-1-lukas.bulwahn@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable all available I2C drivers needed for the Epson Moverio BT200,
that are:
- LED
- Subdevs of the TWL6032 PMIC
- IMU sensors
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20231120215635.4187399-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since the required clock is now available, add bluetooth.
Note: Firmware (bts file) from device vendor reroutes tx for some time
during initialisation and later put it back, producing timeouts in
bluetooth initialisation but ignoring that command leads to proper
initialisation.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20231004070309.2408745-1-andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since the rethook::handler is an RCU-maganged pointer so that it will
notice readers the rethook is stopped (unregistered) or not, it should
be an __rcu pointer and use appropriate functions to be accessed. This
will use appropriate memory barrier when accessing it. OTOH,
rethook::data is never changed, so we don't need to check it in
get_kretprobe().
NOTE: To avoid sparse warning, rethook::handler is defined by a raw
function pointer type with __rcu instead of rethook_handler_t.
Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/
Fixes: 54ecbe6f1e ("rethook: Add a generic return hook")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311241808.rv9ceuAh-lkp@intel.com/
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.
The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.
I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.
Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
Fixes: d741bf41d7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
objpool overrun stress with test_objpool on OrangePi5+ SBC triggered the
following kernel warnings:
WARNING: CPU: 6 PID: 3115 at lib/objpool.c:168 objpool_push+0xc0/0x100
This message is from objpool.c:168:
WARN_ON_ONCE(tail - head > pool->nr_objs);
The overrun test case is to validate the case that pre-allocated objects
are insufficient: 8 objects are pre-allocated for each node and consumer
thread per node tries to grab 16 objects in a row. The testing system is
OrangePI 5+, with RK3588, a big.LITTLE SOC with 4x A76 and 4x A55. When
disabling either all 4 big or 4 little cores, the overrun tests run well,
and once with big and little cores mixed together, the overrun test would
always cause an overrun loop. It's likely the memory timing differences
of big and little cores cause this trouble. Here are the debugging data
of objpool_try_get_slot after try_cmpxchg_release:
objpool_pop: cpu: 4/0 0:0 head: 278/279 tail:278 last:276/278
The local copies of 'head' and 'last' were 278 and 276, and reloading of
'slot->head' and 'slot->last' got 279 and 278. After try_cmpxchg_release
'slot->head' became 'head + 1', which is correct. But what's wrong here
is the stale value of 'last', and that stale value of 'last' finally led
the overrun of 'head'.
Memory updating of 'last' and 'head' are performed in push() and pop()
independently, which could be the culprit leading this out of order
visibility of 'last' and 'head'. So for objpool_try_get_slot(), it's
not enough only checking the condition of 'head != slot', the implicit
condition 'last - head <= nr_objs' must also be explicitly asserted to
guarantee 'last' is always behind 'head' before the object retrieving.
This patch will check and try reloading of 'head' and 'last' to ensure
'last' is behind 'head' at the time of object retrieving. Performance
testings show the average impact is about 0.1% for X86_64 and 1.12% for
ARM64. Here are the results:
OS: Debian 10 X86_64, Linux 6.6rc
HW: XEON 8336C x 2, 64 cores/128 threads, DDR4 3200MT/s
1T 2T 4T 8T 16T
native: 49543304 99277826 199017659 399070324 795185848
objpool: 29909085 59865637 119692073 239750369 478005250
objpool+: 29879313 59230743 119609856 239067773 478509029
32T 48T 64T 96T 128T
native: 1596927073 2390099988 2929397330 3183875848 3257546602
objpool: 957553042 1435814086 1680872925 2043126796 2165424198
objpool+: 956476281 1434491297 1666055740 2041556569 2157415622
OS: Debian 11 AARCH64, Linux 6.6rc
HW: Kunpeng-920 96 cores/2 sockets/4 NUMA nodes, DDR4 2933 MT/s
1T 2T 4T 8T 16T
native: 30890508 60399915 123111980 242257008 494002946
objpool: 14742531 28883047 57739948 115886644 232455421
objpool+: 14107220 29032998 57286084 113730493 232232850
24T 32T 48T 64T 96T
native: 746406039 1000174750 1493236240 1998318364 2942911180
objpool: 349164852 467284332 702296756 934459713 1387898285
objpool+: 348388180 462750976 696606096 927865887 1368402195
Link: https://lore.kernel.org/all/20231114115148.298821-1-wuqiang.matt@bytedance.com/
Fixes: b4edb8d2d4 ("lib: objpool added: ring-array based lockless MPMC")
Signed-off-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
This KUnit fixes update for Linux 6.7-rc4 consists of three fixes to
warnings and run-time test behavior. With these fixes, test suite
counter will be reset correctly before running tests, kunit will warn
if tests are too slow, and eliminate warning when kfree() as an action.
-----BEGIN PGP SIGNATURE-----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=g2ql
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Three fixes to warnings and run-time test behavior. With these fixes,
test suite counter will be reset correctly before running tests, kunit
will warn if tests are too slow, and eliminate warning when kfree() as
an action"
* tag 'linux_kselftest-kunit-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: test: Avoid cast warning when adding kfree() as an action
kunit: Reset suite counter right before running tests
kunit: Warn if tests are slow
The syzbot has reported that it can hit the warning in
ext4_dio_write_end_io() because i_size < i_disksize. Indeed the
reproducer creates a race between DIO IO completion and truncate
expanding the file and thus ext4_dio_write_end_io() sees an inconsistent
inode state where i_disksize is already updated but i_size is not
updated yet. Since we are careful when setting up DIO write and consider
it extending (and thus performing the IO synchronously with i_rwsem held
exclusively) whenever it goes past either of i_size or i_disksize, we
can use the same test during IO completion without risking entering
ext4_handle_inode_extension() without i_rwsem held. This way we make it
obvious both i_size and i_disksize are large enough when we report DIO
completion without relying on unreliable WARN_ON.
Reported-by: <syzbot+47479b71cdfc78f56d30@syzkaller.appspotmail.com>
Fixes: 91562895f8 ("ext4: properly sync file size update after O_SYNC direct IO")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current jbd2 only add REQ_SYNC for descriptor block, metadata log
buffer, commit buffer and superblock buffer, the submitted IO could be
throttled by writeback throttle in block layer, that could lead to
priority inversion in some cases. The log IO looks like a kind of high
priority metadata IO, so it should not be throttled by WBT like QOS
policies in block layer, let's add REQ_SYNC | REQ_IDLE to exempt from
writeback throttle, and also add REQ_META together indicates it's a
metadata IO.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231129114740.2686201-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The write_flags print in the trace of jbd2_write_superblock() is not
real, so move the modification before the trace.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231129114740.2686201-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ACPI specification says:
"If an error occurs while obtaining the meter reading or if the value
is not available then an Integer with all bits set is returned"
Since the "integer" is 32 bits in case of the ACPI power meter,
userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW)
in case of such an error. This was discovered due to a lm_sensors
bugreport (https://github.com/lm-sensors/lm-sensors/issues/460).
Fix this by returning -ENODATA instead.
Tested-by: <urbinek@gmail.com>
Fixes: de584afa5e ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
For files with logical blocks close to EXT_MAX_BLOCKS, the file size
predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS.
This can cause some blocks to be preallocated that will not be used.
And after [Fixes], the following issue may be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:4653!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f
Hardware name: linux,dummy-virt (DT)
pc : ext4_mb_use_inode_pa+0x148/0x208
lr : ext4_mb_use_inode_pa+0x98/0x208
Call trace:
ext4_mb_use_inode_pa+0x148/0x208
ext4_mb_new_inode_pa+0x240/0x4a8
ext4_mb_use_best_found+0x1d4/0x208
ext4_mb_try_best_found+0xc8/0x110
ext4_mb_regular_allocator+0x11c/0xf48
ext4_mb_new_blocks+0x790/0xaa8
ext4_ext_map_blocks+0x7cc/0xd20
ext4_map_blocks+0x170/0x600
ext4_iomap_begin+0x1c0/0x348
=========================================================
Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa():
ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
goto adjust_bex;
The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len
it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to
overflow to a very small value, which ultimately triggers a BUG_ON in
ext4_mb_new_inode_pa() because pa->pa_free < len.
The last logical block of an actual write request does not exceed
EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing
the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue.
The test case in [Link] can reproduce the above issue with 64k block size.
Link: https://patchwork.kernel.org/project/fstests/list/?series=804003
Cc: <stable@kernel.org> # 6.4
Fixes: 93cdf49f6e ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZWiCPAAKCRDbK58LschI
g4djAQC1FdqCRIFkhbiIRNHTgHjnfQShELQbd9ofJqzylLqmmgD+JI1E7D9SXagm
pIXQ26EGmq8/VcCT3VLncA8EsC76Gg4=
=Xowm
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3 ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes following checkpatch.pl issue:
ERROR: do not initialise statics to 0
Signed-off-by: Atul Kumar Pant <atulpant.linux@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patchset fixes TODO:
"If we're already root, we could skip creating the userns."
Change namespace creation for root and non-root
user differently in create_and_enter_ns() function
in this file:
tools/testing/selftests/capabilities/test_execve.c
Test result with root user:
$sudo make TARGETS="capabilities" kselftest
...
TAP version 13
1..1
timeout set to 45
selftests: capabilities: test_execve
TAP version 13
1..12
[RUN] +++ Tests with uid == 0 +++
[NOTE] Using global UIDs for tests
[RUN] Root => ep
...
ok 12 Passed
Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
==================================================
TAP version 13
1..9
[RUN] +++ Tests with uid != 0 +++
[NOTE] Using global UIDs for tests
[RUN] Non-root => no caps
...
ok 9 Passed
Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Test result without root or normal user:
$make TARGETS="capabilities" kselftest
...
timeout set to 45
selftests: capabilities: test_execve
TAP version 13
1..12
[RUN] +++ Tests with uid == 0 +++
[NOTE] Using a user namespace for tests
[RUN] Root => ep
validate_cap:: Capabilities after execve were correct
ok 1 Passed
Check cap_ambient manipulation rules
ok 2 PR_CAP_AMBIENT_RAISE failed on non-inheritable cap
ok 3 PR_CAP_AMBIENT_RAISE failed on non-permitted cap
ok 4 PR_CAP_AMBIENT_RAISE worked
ok 5 Basic manipulation appears to work
[RUN] Root +i => eip
validate_cap:: Capabilities after execve were correct
ok 6 Passed
[RUN] UID 0 +ia => eipa
validate_cap:: Capabilities after execve were correct
ok 7 Passed
ok 8 # SKIP SUID/SGID tests (needs privilege)
Planned tests != run tests (12 != 8)
Totals: pass:7 fail:0 xfail:0 xpass:0 skip:1 error:0
==================================================
TAP version 13
1..9
[RUN] +++ Tests with uid != 0 +++
[NOTE] Using a user namespace for tests
[RUN] Non-root => no caps
validate_cap:: Capabilities after execve were correct
ok 1 Passed
Check cap_ambient manipulation rules
ok 2 PR_CAP_AMBIENT_RAISE failed on non-inheritable cap
ok 3 PR_CAP_AMBIENT_RAISE failed on non-permitted cap
ok 4 PR_CAP_AMBIENT_RAISE worked
ok 5 Basic manipulation appears to work
[RUN] Non-root +i => i
validate_cap:: Capabilities after execve were correct
ok 6 Passed
[RUN] UID 1 +ia => eipa
validate_cap:: Capabilities after execve were correct
ok 7 Passed
ok 8 # SKIP SUID/SGID tests (needs privilege)
Planned tests != run tests (9 != 8)
Totals: pass:7 fail:0 xfail:0 xpass:0 skip:1 error:0
Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch covers the testing of PR_GET_NAME by
reading it's value from proc/self/task/pid/comm
and matching it with the value returned by PR_GET_NAME.
If the values are matched then it's successful, otherwise
it fails.
changes since v1:
- Handled fscanf,fopen error checking.
- Defined MAX_PATH_LEN.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
During hibernate sequence the source context might not have a clk_mgr.
So don't use it to look for DML2 support.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2980
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the unlikely event of radeon_ring_lock() failing, its errno return
value should be processed. This patch checks said return value and
prints a debug message in case of an error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 48c0c902e2 ("drm/radeon/kms: add support for CP setup on SI")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It may be possible, albeit unlikely, to encounter integer overflow
during the multiplication of several unsigned int variables, the
result being assigned to a variable 'size' of wider type.
Prevent this potential behaviour by converting one of the multiples
to unsigned long.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 0242f74d29 ("drm/radeon: clean up CS functions in r100.c")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While improbable, there may be a chance of hitting integer
overflow when the result of radeon_get_ib_value() gets shifted
left.
Avoid it by casting one of the operands to larger data type (u64).
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 1729dd33d2 ("drm/radeon/kms: r600 CS parser fixes")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable MCA debug mode on APU device by default.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some SKU, rlc firmware should use different one
compared with the normal rlc firmware.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_ip_version() helper function to check ip version.
The ip version contains other information,
use the helper function to avoid reading wrong value.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
