Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=QiQp
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and wifi.
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()"
* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: ravb: Keep reverse order of operations in ravb_remove()
net: ravb: Stop DMA in case of failures on ravb_open()
net: ravb: Start TX queues after HW initialization succeeded
net: ravb: Make write access to CXR35 first before accessing other EMAC registers
net: ravb: Use pm_runtime_resume_and_get()
net: ravb: Check return value of reset_control_deassert()
net: libwx: fix memory leak on msix entry
ice: Fix VF Reset paths when interface in a failed over aggregate
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
tools: ynl-gen: always construct struct ynl_req_state
ethtool: don't propagate EOPNOTSUPP from dumps
ravb: Fix races between ravb_tx_timeout_work() and net related ops
r8169: prevent potential deadlock in rtl8169_close
r8169: fix deadlock on RTL8125 in jumbo mtu mode
neighbour: Fix __randomize_layout crash in struct neighbour
octeontx2-pf: Restore TC ingress police rules when interface is up
octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
net: stmmac: xgmac: Disable FPE MMC interrupts
octeontx2-af: Fix possible buffer overflow
...
[Why]
Golden registers are PF-only registers on gfx11.
RLCG interface will return "out-of-range" under SRIOV VF.
[How]
Skip access gfx11 golden registers under SRIOV.
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=Kmg+
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Avoid polling for the scmi_perf_domain on arm
* tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: arm: Avoid polling for scmi_perf_domain
- Remove duplicate sysfs entry 'color' from LEDs class
-----BEGIN PGP SIGNATURE-----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=aIyZ
-----END PGP SIGNATURE-----
Merge tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED fix from Lee Jones:
- Remove duplicate sysfs entry 'color' from LEDs class
* tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: class: Don't expose color sysfs entry
sysfs__read_bool() used the first byte from a fully read file into a
string. It then looked at the first byte's value. Avoid doing this and
just read the first byte.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Dong <lidong@vivo.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231127220902.1315692-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
filename__read_str() has its own string reading code that allocates
memory before reading into it. The memory allocated is sized at BUFSIZ
that is 8kb. Most strings are short and so most of this 8kb is wasted.
Refactor io__getline(), as io__getdelim(), so that the newline character
can be configurable and ignored in the case of filename__read_str().
Code like build_caches_for_cpu() in perf's header.c will read many strings
and hold them in a data structure, in this case multiple strings per
cache level per CPU.
Using io.h's io__getline() avoids the wasted memory as strings are
temporarily read into a buffer on the stack before being copied to a
buffer that grows 128 bytes at a time and is never sized larger than the
string.
For a 16 hyperthread system the memory consumption of "perf record
true" is reduced by 180kb, primarily through saving memory when
reading the cache information.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Dong <lidong@vivo.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231127220902.1315692-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The event copy in the mmap is used to have storage to read an event. Not
all users of mmaps read the events, such as perf record. The amount of
buffer was also statically set to PERF_SAMPLE_MAX_SIZE rather than the
amount necessary from the header's event size.
Switch to a model where the event_copy is reallocated if too small to
the event's size. This adds the potential for the event to move, so if a
copy of the event pointer were stored it could be broken. All the
current users do:
while(event = perf_mmap__read_event()) { ... }
and so they would be broken due to the event being overwritten if they
had stored the pointer. Manual inspection and address sanitizer testing
also shows the event pointer not being stored.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Dong <lidong@vivo.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231127220902.1315692-3-irogers@google.com
[ Replace two lines with equivalent zfree(&map->event_copy) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are functions using __u64, so we need to have the linux/types.h
header otherwise we'll break when its not included before api/io.h.
Fixes: e95770af4c ("tools api: Add a lightweight buffered reading api")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZWjDPL+IzPPsuC3X@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes for v6.7-rc4:
- Revert panel fixes as they require exporting device_is_dependent.
- Do not double add fences in dma_resv_add_fence.
- Fix GPUVM license identifier.
- Assorted nouveau fixes.
- Fix error check for nt36523.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/561f807e-f9d3-43c1-80d3-8b41ba83c9ec@linux.intel.com
There is a mechanism for reporting errors from fire and forget H2G
messages. This is the only way to find out about almost any error in
the GuC backend submission path. So it would be useful to know that it
is working.
v2: Fix some dumb over-complications and a couple of typos - review
feedback from Daniele.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-3-John.C.Harrison@Intel.com
Noticed that the hangcheck selftest is submitting a non-preemptoble
spinner. That means that even if the GuC does not die, the heartbeat
will still kick in and trigger a reset. Which is rather defeating the
purpose of the test - to verify that the heartbeat will kick in if the
GuC itself has died. The test is deliberately killing the GuC, so it
should never hit the case of a non-dead GuC. But it is not impossible
that the kill might fail at some future point due to other driver
re-work.
So, make the spinner pre-emptible. That way the heartbeat can get
through if the GuC is alive and context switching. Thus a reset only
happens if the GuC dies. Thus, if the kill should stop working the
test will now fail rather than claim to pass.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-2-John.C.Harrison@Intel.com
There are a couple of raw printf() calls in vdso_test_abi which result in
non KTAP conforment output such as
[vDSO kselftest] VDSO_VERSION: LINUX_2.6
Convert them to use ksft_print_msg() so that they don't cause confusion for
parsers.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When logging the ID of the currently tested clock vdso_test_clock() puts a
spurious newline at the start of the format string resulting in output
such as
#
clock_id: CLOCK_BOOTTIME
which is a valid but empty KTAP informational message followed by a non
conferment output line. Remove the initial newline to create a more KTAP
friendly
# clock_id: CLOCK_BOOTTIME
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test results from vdso_abi_test are all formatted using a series of
macros:
#define VDSO_TEST_PASS_MSG() "\n%s(): PASS\n", __func__
#define VDSO_TEST_FAIL_MSG(x) "\n%s(): %s FAIL\n", __func__, x
#define VDSO_TEST_SKIP_MSG(x) "\n%s(): SKIP: Could not find %s\n", __func__, x
which don't play nicely with automated KTAP parsers since the actual KTAP
lines are in the form
ok 1
with no test name and we get an additional log line such as
vdso_test_gettimeofday(): PASS
with no preceeding # as KTAP requires. The lack of a test name means that
many automation systems will have a hard time distinguishing between the
different tests or correlating results between runs, the lack of # is less
severe but could potentially cause confusion.
Fix these issues by rewriting all the result reporting to include both the
vDSO function name being tested and (where there is one) the name of the
clock being tested in the main KTAP line. Since we have tests both with and
without a specific clock we abandon the helper macros and just put the
format strings used directly in the ksft_ API calls. When we fail to look
up the relevant vDSO symbol we add a separate print statement explaining
why the skip is being done. This gives output such as:
ok 1 __vdso_gettimeofday
# clock_id: CLOCK_REALTIME
# The time is 1700673118.58091596
ok 2 __vdso_clock_gettime CLOCK_REALTIME
which is much easier for test automation to work with.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct i40e_qvlist_info.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Gurucharan G <gurucharanx.g@intel.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231003231838.work.510-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
This commit addresses compiler warnings in lam.c related to the usage
of non-literal format strings without format arguments in the
'run_test' function.
Warnings fixed:
- Resolved warnings indicating that 'ksft_test_result_skip' and
'ksft_test_result' were called with 't->msg' as a format string without
accompanying format arguments.
Changes made:
- Modified the calls to 'ksft_test_result_skip' and 'ksft_test_result'
to explicitly include a format specifier ("%s") for 't->msg'.
- This ensures that the string is safely treated as a format argument,
adhering to safer coding practices and resolving the compiler warnings.
Signed-off-by: angquan yu <angquan21@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In the function 'tools/testing/selftests/breakpoints/run_test' within
step_after_suspend_test.c, the ksft_print_msg function call incorrectly
used '$s' as a format specifier. This commit corrects this typo to use the
proper '%s' format specifier, ensuring the error message from
waitpid() is correctly displayed.
The issue manifested as a compilation warning (too many arguments
for format [-Wformat-extra-args]), potentially obscuring actual
runtime errors and complicating debugging processes.
This fix enhances the clarity of error messages during test failures
and ensures compliance with standard C format string conventions.
Signed-off-by: angquan yu <angquan21@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This commit resolves a compiler warning regardingthe
use of non-literal format strings in breakpoint_test.c.
The functions `ksft_test_result_pass` and `ksft_test_result_fail`
were previously called with a variable `msg` directly, which could
potentially lead to format string vulnerabilities.
Changes made:
- Modified the calls to `ksft_test_result_pass` and `ksft_test_result_fail`
by adding a "%s" format specifier. This explicitly declares `msg` as a
string argument, adhering to safer coding practices and resolving
the compiler warning.
This change does not affect the functional behavior of the code but ensures
better code safety and compliance with recommended C programming standards.
The previous warning is "breakpoint_test.c:287:17:
warning: format not a string literal and no format arguments
[-Wformat-security]
287 | ksft_test_result_pass(msg);
| ^~~~~~~~~~~~~~~~~~~~~
breakpoint_test.c:289:17: warning: format not a string literal
and no format arguments [-Wformat-security]
289 | ksft_test_result_fail(msg);
| "
Signed-off-by: angquan yu <angquan21@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
cpuid.c utilizes vmemdup_user() and array_size() to copy two userspace
arrays. This, currently, does not check for an overflow.
Use the new wrapper vmemdup_array_user() to copy the arrays more safely,
as vmemdup_user() doesn't check for overflow.
Note, KVM explicitly checks the number of entries before duplicating the
array, i.e. adding the overflow check should be a glorified nop.
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20231102181526.43279-2-pstanner@redhat.com
[sean: call out that KVM pre-checks the number of entries]
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM_CAP_DEVICE_CTRL allows userspace to check if the kvm_device
framework (e.g. KVM_CREATE_DEVICE) is supported by KVM. Move
KVM_CAP_DEVICE_CTRL to the generic check for the two reasons:
1) it already supports arch agnostic usages (i.e. KVM_DEV_TYPE_VFIO).
For example, userspace VFIO implementation may needs to create
KVM_DEV_TYPE_VFIO on x86, riscv, or arm etc. It is simpler to have it
checked at the generic code than at each arch's code.
2) KVM_CREATE_DEVICE has been added to the generic code.
Link: https://lore.kernel.org/all/20221215115207.14784-1-wei.w.wang@intel.com
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Acked-by: Anup Patel <anup@brainfault.org> (riscv)
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230315101606.10636-1-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
drm/i915 fixes for v6.7-rc4:
- Mark internal GSC engine with reserved uabi class
- Take VGA converters into account in eDP probe
- Fix intel_pre_plane_updates() call to ensure workarounds get applied
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87msuv479z.fsf@intel.com
Explicitly track emulated counter events instead of using the common
counter value that's shared with the hardware counter owned by perf.
Bumping the common counter requires snapshotting the pre-increment value
in order to detect overflow from emulation, and the snapshot approach is
inherently flawed.
Snapshotting the previous counter at every increment assumes that there is
at most one emulated counter event per emulated instruction (or rather,
between checks for KVM_REQ_PMU). That's mostly holds true today because
KVM only emulates (branch) instructions retired, but the approach will
fall apart if KVM ever supports event types that don't have a 1:1
relationship with instructions.
And KVM already has a relevant bug, as handle_invalid_guest_state()
emulates multiple instructions without checking KVM_REQ_PMU, i.e. could
miss an overflow event due to clobbering pmc->prev_counter. Not checking
KVM_REQ_PMU is problematic in both cases, but at least with the emulated
counter approach, the resulting behavior is delayed overflow detection,
as opposed to completely lost detection.
Tracking the emulated count fixes another bug where the snapshot approach
can signal spurious overflow due to incorporating both the emulated count
and perf's count in the check, i.e. if overflow is detected by perf, then
KVM's emulation will also incorrectly signal overflow. Add a comment in
the related code to call out the need to process emulated events *after*
pausing the perf event (big kudos to Mingwei for figuring out that
particular wrinkle).
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Roman Kagan <rkagan@amazon.de>
Cc: Jim Mattson <jmattson@google.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Like Xu <like.xu.linux@gmail.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20231103230541.352265-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Update a PMC's sample period in pmc_write_counter() to deduplicate code
across all callers of pmc_write_counter(). Opportunistically move
pmc_write_counter() into pmc.c now that it's doing more work. WRMSR isn't
such a hot path that an extra CALL+RET pair will be problematic, and the
order of function definitions needs to be changed anyways, i.e. now is a
convenient time to eat the churn.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove code that unnecessarily clears event_count and need_cleanup in
kvm_pmu_init(), the entire kvm_pmu is zeroed just a few lines earlier.
Vendor code doesn't set event_count or need_cleanup during .init(), and
if either VMX or SVM did set those fields it would be a flagrant bug.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop kvm_vcpu_reset()'s call to kvm_pmu_reset(), the call is performed
only for RESET, which is really just the same thing as vCPU creation,
and kvm_arch_vcpu_create() *just* called kvm_pmu_init(), i.e. there can't
possibly be any work to do.
Unlike Intel, AMD's amd_pmu_refresh() does fill all_valid_pmc_idx even if
guest CPUID is empty, but everything that is at all dynamic is guaranteed
to be '0'/NULL, e.g. it should be impossible for KVM to have already
created a perf event.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stop all counters and release all perf events before refreshing the vPMU,
i.e. before reconfiguring the vPMU to respond to changes in the vCPU
model.
Clear need_cleanup in kvm_pmu_reset() as well so that KVM doesn't
prematurely stop counters, e.g. if KVM enters the guest and enables
counters before the vCPU is scheduled out.
Cc: stable@vger.kernel.org
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the common (or at least "ignored") aspects of resetting the vPMU to
common x86 code, along with the stop/release helpers that are no used only
by the common pmu.c.
There is no need to manually handle fixed counters as all_valid_pmc_idx
tracks both fixed and general purpose counters, and resetting the vPMU is
far from a hot path, i.e. the extra bit of overhead to the PMC from the
index is a non-issue.
Zero fixed_ctr_ctrl in common code even though it's Intel specific.
Ensuring it's zero doesn't harm AMD/SVM in any way, and stopping the fixed
counters via all_valid_pmc_idx, but not clearing the associated control
bits, would be odd/confusing.
Make the .reset() hook optional as SVM no longer needs vendor specific
handling.
Cc: stable@vger.kernel.org
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20231103230541.352265-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Instruction with %rip-relative address operand is one byte shorter than
its absolute address counterpart and is also compatible with position
independent executable (-fpie) build.
No functional changes intended.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20231031075312.47525-1-ubizjak@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When vNMI is enabled, rely entirely on hardware to correctly handle NMI
blocking, i.e. don't intercept IRET to detect when NMIs are no longer
blocked. KVM already correctly ignores svm->nmi_masked when vNMI is
enabled, so the effect of the bug is essentially an unnecessary VM-Exit.
KVM intercepts IRET for two reasons:
- To track NMI masking to be able to know at any point of time if NMI
is masked.
- To track NMI windows (to inject another NMI after the guest executes
IRET, i.e. unblocks NMIs)
When vNMI is enabled, both cases are handled by hardware:
- NMI masking state resides in int_ctl.V_NMI_BLOCKING and can be read by
KVM at will.
- Hardware automatically "injects" pending virtual NMIs when virtual NMIs
become unblocked.
However, even though pending a virtual NMI for hardware to handle is the
most common way to synthesize a guest NMI, KVM may still directly inject
an NMI via when KVM is handling two "simultaneous" NMIs (see comments in
process_nmi() for details on KVM's simultaneous NMI handling). Per AMD's
APM, hardware sets the BLOCKING flag when software directly injects an NMI
as well, i.e. KVM doesn't need to manually mark vNMIs as blocked:
If Event Injection is used to inject an NMI when NMI Virtualization is
enabled, VMRUN sets V_NMI_MASK in the guest state.
Note, it's still possible that KVM could trigger a spurious IRET VM-Exit.
When running a nested guest, KVM disables vNMI for L2 and thus will enable
IRET interception (in both vmcb01 and vmcb02) while running L2 reason. If
a nested VM-Exit happens before L2 executes IRET, KVM can end up running
L1 with vNMI enable and IRET intercepted. This is also a benign bug, and
even less likely to happen, i.e. can be safely punted to a future fix.
Fixes: fa4c027a79 ("KVM: x86: Add support for SVM's Virtual NMI")
Link: https://lore.kernel.org/all/ZOdnuDZUd4mevCqe@google.como
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20231018192021.1893261-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a sanity check that FLUSHBYASID is available if SEV is supported in
hardware, as SEV (and beyond) guests are bound to a single ASID, i.e. KVM
can't "flush" by assigning a new, fresh ASID to the guest. If FLUSHBYASID
isn't supported for some bizarre reason, KVM would completely fail to do
TLB flushes for SEV+ guests (see pre_svm_run() and pre_sev_run()).
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20231018193617.1895752-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise support for FLUSHBYASID when nested SVM is enabled, as KVM can
always emulate flushing TLB entries for a vmcb12 ASID, e.g. by running L2
with a new, fresh ASID in vmcb02. Some modern hypervisors, e.g. VMWare
Workstation 17, require FLUSHBYASID support and will refuse to run if it's
not present.
Punt on proper support, as "Honor L1's request to flush an ASID on nested
VMRUN" is one of the TODO items in the (incomplete) list of issues that
need to be addressed in order for KVM to NOT do a full TLB flush on every
nested SVM transition (see nested_svm_transition_tlb_flush()).
Reported-by: Stefan Sterz <s.sterz@proxmox.com>
Closes: https://lkml.kernel.org/r/b9915c9c-4cf6-051a-2d91-44cc6380f455%40proxmox.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231018194104.1896415-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Revert KVM's made-up consistency check on SVM's TLB control. The APM says
that unsupported encodings are reserved, but the APM doesn't state that
VMRUN checks for a supported encoding. Unless something is called out
in "Canonicalization and Consistency Checks" or listed as MBZ (Must Be
Zero), AMD behavior is typically to let software shoot itself in the foot.
This reverts commit 174a921b69.
Fixes: 174a921b69 ("nSVM: Check for reserved encodings of TLB_CONTROL in nested VMCB")
Reported-by: Stefan Sterz <s.sterz@proxmox.com>
Closes: https://lkml.kernel.org/r/b9915c9c-4cf6-051a-2d91-44cc6380f455%40proxmox.com
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231018194104.1896415-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't force a masterclock update when a vCPU synchronizes to the current
TSC generation, e.g. when userspace hotplugs a pre-created vCPU into the
VM. Unnecessarily updating the masterclock is undesirable as it can cause
kvmclock's time to jump, which is particularly painful on systems with a
stable TSC as kvmclock _should_ be fully reliable on such systems.
The unexpected time jumps are due to differences in the TSC=>nanoseconds
conversion algorithms between kvmclock and the host's CLOCK_MONOTONIC_RAW
(the pvclock algorithm is inherently lossy). When updating the
masterclock, KVM refreshes the "base", i.e. moves the elapsed time since
the last update from the kvmclock/pvclock algorithm to the
CLOCK_MONOTONIC_RAW algorithm. Synchronizing kvmclock with
CLOCK_MONOTONIC_RAW is the lesser of evils when the TSC is unstable, but
adds no real value when the TSC is stable.
Prior to commit 7f187922dd ("KVM: x86: update masterclock values on TSC
writes"), KVM did NOT force an update when synchronizing a vCPU to the
current generation.
commit 7f187922dd
Author: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue Nov 4 21:30:44 2014 -0200
KVM: x86: update masterclock values on TSC writes
When the guest writes to the TSC, the masterclock TSC copy must be
updated as well along with the TSC_OFFSET update, otherwise a negative
tsc_timestamp is calculated at kvm_guest_time_update.
Once "if (!vcpus_matched && ka->use_master_clock)" is simplified to
"if (ka->use_master_clock)", the corresponding "if (!ka->use_master_clock)"
becomes redundant, so remove the do_request boolean and collapse
everything into a single condition.
Before that, KVM only re-synced the masterclock if the masterclock was
enabled or disabled Note, at the time of the above commit, VMX
synchronized TSC on *guest* writes to MSR_IA32_TSC:
case MSR_IA32_TSC:
kvm_write_tsc(vcpu, msr_info);
break;
which is why the changelog specifically says "guest writes", but the bug
that was being fixed wasn't unique to guest write, i.e. a TSC write from
the host would suffer the same problem.
So even though KVM stopped synchronizing on guest writes as of commit
0c899c25d7 ("KVM: x86: do not attempt TSC synchronization on guest
writes"), simply reverting commit 7f187922dd is not an option. Figuring
out how a negative tsc_timestamp could be computed requires a bit more
sleuthing.
In kvm_write_tsc() (at the time), except for KVM's "less than 1 second"
hack, KVM snapshotted the vCPU's current TSC *and* the current time in
nanoseconds, where kvm->arch.cur_tsc_nsec is the current host kernel time
in nanoseconds:
ns = get_kernel_ns();
...
if (usdiff < USEC_PER_SEC &&
vcpu->arch.virtual_tsc_khz == kvm->arch.last_tsc_khz) {
...
} else {
/*
* We split periods of matched TSC writes into generations.
* For each generation, we track the original measured
* nanosecond time, offset, and write, so if TSCs are in
* sync, we can match exact offset, and if not, we can match
* exact software computation in compute_guest_tsc()
*
* These values are tracked in kvm->arch.cur_xxx variables.
*/
kvm->arch.cur_tsc_generation++;
kvm->arch.cur_tsc_nsec = ns;
kvm->arch.cur_tsc_write = data;
kvm->arch.cur_tsc_offset = offset;
matched = false;
pr_debug("kvm: new tsc generation %llu, clock %llu\n",
kvm->arch.cur_tsc_generation, data);
}
...
/* Keep track of which generation this VCPU has synchronized to */
vcpu->arch.this_tsc_generation = kvm->arch.cur_tsc_generation;
vcpu->arch.this_tsc_nsec = kvm->arch.cur_tsc_nsec;
vcpu->arch.this_tsc_write = kvm->arch.cur_tsc_write;
Note that the above creates a new generation and sets "matched" to false!
But because kvm_track_tsc_matching() looks for matched+1, i.e. doesn't
require the vCPU that creates the new generation to match itself, KVM
would immediately compute vcpus_matched as true for VMs with a single vCPU.
As a result, KVM would skip the masterlock update, even though a new TSC
generation was created:
vcpus_matched = (ka->nr_vcpus_matched_tsc + 1 ==
atomic_read(&vcpu->kvm->online_vcpus));
if (vcpus_matched && gtod->clock.vclock_mode == VCLOCK_TSC)
if (!ka->use_master_clock)
do_request = 1;
if (!vcpus_matched && ka->use_master_clock)
do_request = 1;
if (do_request)
kvm_make_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu);
On hardware without TSC scaling support, vcpu->tsc_catchup is set to true
if the guest TSC frequency is faster than the host TSC frequency, even if
the TSC is otherwise stable. And for that mode, kvm_guest_time_update(),
by way of compute_guest_tsc(), uses vcpu->arch.this_tsc_nsec, a.k.a. the
kernel time at the last TSC write, to compute the guest TSC relative to
kernel time:
static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)
{
u64 tsc = pvclock_scale_delta(kernel_ns-vcpu->arch.this_tsc_nsec,
vcpu->arch.virtual_tsc_mult,
vcpu->arch.virtual_tsc_shift);
tsc += vcpu->arch.this_tsc_write;
return tsc;
}
Except the "kernel_ns" passed to compute_guest_tsc() isn't the current
kernel time, it's the masterclock snapshot!
spin_lock(&ka->pvclock_gtod_sync_lock);
use_master_clock = ka->use_master_clock;
if (use_master_clock) {
host_tsc = ka->master_cycle_now;
kernel_ns = ka->master_kernel_ns;
}
spin_unlock(&ka->pvclock_gtod_sync_lock);
if (vcpu->tsc_catchup) {
u64 tsc = compute_guest_tsc(v, kernel_ns);
if (tsc > tsc_timestamp) {
adjust_tsc_offset_guest(v, tsc - tsc_timestamp);
tsc_timestamp = tsc;
}
}
And so when KVM skips the masterclock update after a TSC write, i.e. after
a new TSC generation is started, the "kernel_ns-vcpu->arch.this_tsc_nsec"
is *guaranteed* to generate a negative value, because this_tsc_nsec was
captured after ka->master_kernel_ns.
Forcing a masterclock update essentially fudged around that problem, but
in a heavy handed way that introduced undesirable side effects, i.e.
unnecessarily forces a masterclock update when a new vCPU joins the party
via hotplug.
Note, KVM forces masterclock updates in other weird ways that are also
likely unnecessary, e.g. when establishing a new Xen shared info page and
when userspace creates a brand new vCPU. But the Xen thing is firmly a
separate mess, and there are no known userspace VMMs that utilize kvmclock
*and* create new vCPUs after the VM is up and running. I.e. the other
issues are future problems.
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/all/20230926230649.67852-1-dongli.zhang@oracle.com
Fixes: 7f187922dd ("KVM: x86: update masterclock values on TSC writes")
Cc: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com>
Tested-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20231018195638.1898375-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The number of opps on certain variants of the X1E80100 SoC are greater
than current maximum of 16, so increase the MAX_OPP count to 32 (next
power of 2) to accommodate that.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231129065748.19871-4-quic_sibis@quicinc.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use a switch statement with macro-generated case statements to handle
translating feature flags in order to reduce the probability of runtime
errors due to copy+paste goofs, to make compile-time errors easier to
debug, and to make the code more readable.
E.g. the compiler won't directly generate an error for duplicate if
statements
if (x86_feature == X86_FEATURE_SGX1)
return KVM_X86_FEATURE_SGX1;
else if (x86_feature == X86_FEATURE_SGX2)
return KVM_X86_FEATURE_SGX1;
and so instead reverse_cpuid_check() will fail due to the untranslated
entry pointing at a Linux-defined leaf, which provides practically no
hint as to what is broken
arch/x86/kvm/reverse_cpuid.h:108:2: error: call to __compiletime_assert_450 declared with 'error' attribute:
BUILD_BUG_ON failed: x86_leaf == CPUID_LNX_4
BUILD_BUG_ON(x86_leaf == CPUID_LNX_4);
^
whereas duplicate case statements very explicitly point at the offending
code:
arch/x86/kvm/reverse_cpuid.h:125:2: error: duplicate case value '361'
KVM_X86_TRANSLATE_FEATURE(SGX2);
^
arch/x86/kvm/reverse_cpuid.h:124:2: error: duplicate case value '360'
KVM_X86_TRANSLATE_FEATURE(SGX1);
^
And without macros, the opposite type of copy+paste goof doesn't generate
any error at compile-time, e.g. this yields no complaints:
case X86_FEATURE_SGX1:
return KVM_X86_FEATURE_SGX1;
case X86_FEATURE_SGX2:
return KVM_X86_FEATURE_SGX1;
Note, __feature_translate() is forcibly inlined and the feature is known
at compile-time, so the code generation between an if-elif sequence and a
switch statement should be identical.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20231024001636.890236-2-jmattson@google.com
[sean: use a macro, rewrite changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Geliang Tang <geliang.tang@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20231116191510.work.550-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().
Explicitly handle the truncation case by returning the size of the
resulting string.
If "nodename" was ever longer than sizeof(clnt->cl_nodename) - 1, this
change will fix a bug where clnt->cl_nodelen would end up thinking there
were more characters in clnt->cl_nodename than there actually were,
which might have lead to kernel memory content exposures.
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Co-developed-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20231114175407.work.410-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Some SoCs have a separate dedicated wake-up interrupt controller that can
be used to wake up the system from deeper idle states. We already support
configuring a separate interrupt for a gpio-keys button to be used with a
gpio line. However, we are lacking support system suspend for cases where
a separate interrupt needs to be used in deeper sleep modes.
Because of it's nature, gpio-keys does not know about the runtime PM state
of the button gpios, and may have several gpio buttons configured for each
gpio-keys device instance. Implementing runtime PM support for gpio-keys
does not help, and we cannot use drivers/base/power/wakeirq.c support. We
need to implement custom wakeirq support for gpio-keys.
For handling a dedicated wakeirq for system suspend, we enable and disable
it with gpio_keys_enable_wakeup() and gpio_keys_disable_wakeup() that we
already use based on device_may_wakeup().
Some systems may have a dedicated wakeirq that can also be used as the
main interrupt, this is already working for gpio-keys. Let's add some
wakeirq related comments while at it as the usage with a gpio line and
separate interrupt line may not be obvious.
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231129110618.27551-2-tony@atomide.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Allow configuring an optional dedicated wakeirq for gpio-keys that
some SoCs have.
Let's use the common interrupt naming "irq" and "wakeup" that we already
have in use for some drivers and subsystems like i2c framework.
Note that the gpio-keys interrupt property is optional. If only a gpio
property is specified, the driver tries to translate the gpio into an
interrupt.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231129110618.27551-1-tony@atomide.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
After the laptop lid is opened, and the device resumes from S3 deep
sleep, if the user presses a keyboard key while the screen is still black,
the mouse and keyboard become unusable.
Enabling this quirk prevents this behavior from occurring.
Signed-off-by: Esther Shimanovich <eshimanovich@chromium.org>
Link: https://lore.kernel.org/r/20231130195615.v2.1.Ibe78a9df97ecd18dc227a5cff67d3029631d9c11@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The low five bits {INTEL_PSFD, IPRED_CTRL, RRSBA_CTRL, DDPD_U, BHI_CTRL}
advertise the availability of specific bits in IA32_SPEC_CTRL. Since KVM
dynamically determines the legal IA32_SPEC_CTRL bits for the underlying
hardware, the hard work has already been done. Just let userspace know
that a guest can use these IA32_SPEC_CTRL bits.
The sixth bit (MCDT_NO) states that the processor does not exhibit MXCSR
Configuration Dependent Timing (MCDT) behavior. This is an inherent
property of the physical processor that is inherited by the virtual
CPU. Pass that information on to userspace.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20231024001636.890236-1-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't enable KVM_WERROR by default for x86-64 builds as KVM's one-off
-Werror enabling is *mostly* superseded by the kernel-wide WERROR, and
enabling KVM_WERROR by default can cause problems for developers working
on other subsystems. E.g. subsystems that have a "zero W=1 regressions"
rule can inadvertently build KVM with -Werror and W=1, and end up with
build failures that are completely uninteresting to the developer (W=1 is
prone to false positives, especially on older compilers).
Keep KVM_WERROR as there are combinations where enabling WERROR isn't
feasible, e.g. the default FRAME_WARN=1024 on i386 builds generates a
non-zero number of warnings and thus errors, and there are far too many
warnings throughout the kernel to enable WERROR with W=1 (building KVM
with -Werror is desirable (with a sane compiler) as W=1 does generate
useful warnings).
Opportunistically drop the dependency on !COMPILE_TEST as it's completely
meaningless (it was copied from i195's -Werror Kconfig), as the kernel's
WERROR is explicitly *enabled* for COMPILE_TEST=y kernel's, i.e. enabling
-Werror is obviosly not dependent on COMPILE_TEST=n.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/all/20231006205415.3501535-1-kuba@kernel.org
Link: https://lore.kernel.org/r/20231018151906.1841689-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This reverts commit 71a7974ac7.
These helper functions are needed for KFD to export and import DMABufs
the right way without duplicating the tracking of DMABufs associated with
GEM objects while ensuring that move notifier callbacks are working as
intended.
CC: Christian König <christian.koenig@amd.com>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A dynamic mechanism is usually an algorithm to adjust registers to adapt
to different environment every two seconds. In field, it could get
unexpected result, so we need to stop it and adjust registers manually, and
then fine tune the algorithm.
To stop mechanisms to assist debugging, add a debugfs entry shown as
Disabled DM: 0x1
[0] DYNAMIC_EDCCA: X
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-4-pkshih@realtek.com
Add dynamic mechanism EDCCA (Energy Detection Clear Channel Assessment)
in track work. Using a fixed-value threshold will make EDCCA particularly
sensitive and cause failure to transmit under certain circumstances.
Therefore, the threshold is dynamically adjusted to make EDCCA suitable
for any situation.
However, in some cases, we will adjust the EDCCA threshold to the highest
level so that urgent transmissions can be performed successfully, such as
scanning.
Finally, in order to observe the EDCCA report in time, add the EDCCA perIC
register macro and EDCCA HW report analysis. EDCCA logs can be displayed
by using the EDCCA debug mask.
Signed-off-by: Yi-Chen Chen <jamie_chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-3-pkshih@realtek.com
The coming dynamic mechanism of EDCCA adjustment will add a function to
dump registers to reflect status. However, if we are not debugging
the mechanism, we don't print anything, so avoid reading registers by
checking debug mask to reduce IO.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-2-pkshih@realtek.com
