Here are a number of reverts, fixes, and new device ids for 6.7-rc3 for
the USB, PHY, and Thunderbolt driver subsystems. Include in here are:
- reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
have been merged yet, the author is reworking them based on review
comments as they were using older apis that shouldn't be used
anymore for newer drivers
- small thunderbolt driver fixes for reported issues
- USB driver fixes for a variety of small issues in dwc3, typec, xhci,
and other smaller drivers.
- new device ids for usb-serial and onboard_usb_hub drivers.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZWJQEw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymq6ACcDMyH78Tv6QeSiI6+czelYbIWarUAoNdM4CEs
DAb8WIkleXLSzrV+PHJN
=IYJt
-----END PGP SIGNATURE-----
Merge tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY / Thunderbolt fixes from Greg KH:
"Here are a number of reverts, fixes, and new device ids for 6.7-rc3
for the USB, PHY, and Thunderbolt driver subsystems. Include in here
are:
- reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
have been merged yet, the author is reworking them based on review
comments as they were using older apis that shouldn't be used
anymore for newer drivers
- small thunderbolt driver fixes for reported issues
- USB driver fixes for a variety of small issues in dwc3, typec,
xhci, and other smaller drivers.
- new device ids for usb-serial and onboard_usb_hub drivers.
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: serial: option: add Luat Air72*U series products
USB: dwc3: qcom: fix ACPI platform device leak
USB: dwc3: qcom: fix software node leak on probe errors
USB: dwc3: qcom: fix resource leaks on probe deferral
USB: dwc3: qcom: simplify wakeup interrupt setup
USB: dwc3: qcom: fix wakeup after probe deferral
dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
usb: misc: onboard-hub: add support for Microchip USB5744
dt-bindings: usb: microchip,usb5744: Add second supply
usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
USB: serial: option: add Fibocom L7xx modules
USB: xhci-plat: fix legacy PHY double init
usb: typec: tipd: Supply also I2C driver data
usb: xhci-mtk: fix in-ep's start-split check failure
usb: dwc3: set the dma max_seg_size
usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
usb: dwc3: add missing of_node_put and platform_device_put
USB: dwc2: write HCINT with INTMASK applied
usb: misc: ljca: Drop _ADR support to get ljca children devices
usb: cdnsp: Fix deadlock issue during using NCM gadget
...
Add spinlock protection to avoid race condition on vblank event
between mtk_drm_crtc_atomic_begin() and mtk_drm_finish_page_flip().
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230920090658.31181-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
I accidentally removed the error checking after issuing the reset.
Restore it.
Fixes: f257c73e53 ("mlxsw: pci: Add support for new reset flow")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
RollBall SFP modules allow the access to PHY registers only after a
certain time has passed. Until then, the registers read 0xffff.
Currently we have quirks for modules where we need to wait either 25
seconds or 4 seconds, but recently I got hands on another module where
the wait is even shorter.
Instead of hardcoding different wait times, lets rework the code:
- increase the PHY retry count to 25
- when RollBall module is detected, increase the PHY retry time from
50ms to 1s
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
KGSL doesn't support a690 so all reg values were the same as
on a660. Now we know the values and they are different from the
windows driver.
This fixes hangs on D3D12 games and some CTS tests.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/568931/
Downstream always set BIT(7)
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/568930/
Commit 33ec3e5fc1 ("iio: adc: adding support for MCP3564 ADC") adds a new
iio driver and corresponding MAINTAINERS section. It however uses spaces
instead of a single tab for all the entries in that MAINTAINERS section.
Although, the get_maintainer.pl script handles spaces instead of tabs
silently, the MAINTAINERS will quickly get into a messy state with
different indentations throughout the file. So, the checkpatch.pl script
complains when spaces instead of a single tab are used.
Fix this recently added section using tabs instead of spaces.
Further, add the driver's ABI documentation file to this section as well.
Fixes: 33ec3e5fc1 ("iio: adc: adding support for MCP3564 ADC")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20231122075629.21411-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* Validate quota records recovered from the log before writing them to the
disk.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZV5ElQAKCRAH7y4RirJu
9DCnAP0bth5eVyCxq9teNsql8sDnWzYtgdp3Sgo6LGjKcbUigAEAldS0EW86fva6
X60DComoQfxT4zMKR6K6h7VvhcF3dwc=
=PQ3p
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
- Validate quota records recovered from the log before writing them to
the disk.
* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: dquot recovery does not validate the recovered dquot
xfs: clean up dqblk extraction
- Fix "rodata=on" not disabling "rodata=full" on arm64
- Add arm64 make dependency between vmlinuz.efi and Image, leading to
occasional build failures previously (with parallel building)
- Add newline to the output formatting of the za-fork kselftest
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmVh0DsACgkQa9axLQDI
XvE8ew//emh6S4JYnUrAQ2n3cOombbcp+pmXrM0rBlv2u2CPRoiov4Oa8sgGawDh
MP1GWil2rpMX9SBqYaUPEfnldOOsr7hGypneSk++gtj+IT40CEyNDHtwH3qemUt7
qjMvBF5UGRYjyF/aJVmPyLeLUD8xKF1JlQy4Pf6FIeBq4QEYbqGjaPHvEg/sUNTi
TKqbSKs68Nl+duOOBzPIR3tgzQJoyrY+I9VC7RjYcBFuLjvHhGejcWWfQacrpKEA
9wSVxGnN+s+JtkSvhxpFfZH/ATl++xQg5X/O9LPFLn29tH3H4mwI71fc0A6Z0MVv
3X6kRTuJnKu8CbhmS0soAVATVuvqCpFHO+j8wiPtT4JsoJgUs9P1p1/tyhSm7B1g
PEpyS7FOx+VNWz8EOxYQ271AK6MnBaURT/o0lr88mFtoisFozIfJxT3ornmj5uWe
of+syeoEBW42aTUTVpv64VtVH6sF8vxBfSG/fWnTrDvRLnZ0Z3VxroPVgdLf6Rei
Hd3kb9cLDsrx3Tb4qzInYt9ja3EvNv9ljHQRSTXp0qb5VdBsxy+cWz9Pt3JPQRub
FTcirL+iYgED5M9G3eX4cRie+Iv4OS5bCvqYdk5c+whsY8rVwkRhhEjzUHmvSWwf
1YSv9av0/SOSsq2f3lOogd+1k5BA9ChWxKX3ojxJmyk7LUWuokY=
=shHM
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix "rodata=on" not disabling "rodata=full" on arm64
- Add arm64 make dependency between vmlinuz.efi and Image, leading to
occasional build failures previously (with parallel building)
- Add newline to the output formatting of the za-fork kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: add dependency between vmlinuz.efi and Image
kselftest/arm64: Fix output formatting for za-fork
arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZWGjKAAKCRCAXGG7T9hj
vmlSAP4nRyboqRF6KhlfH9BoC25Ddx0StY+OBvq8n0wWcycNmQEA5BAyQVKSmpKk
+FRNko03fIWnJA5ZAeNIP+J46QteTQE=
=l0sP
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A small cleanup patch for the Xen privcmd driver
- A fix for the swiotlb-xen driver which was missing the advertising of
the maximum mapping length
- A fix for Xen on Arm for a longstanding bug, which happened to occur
only recently: a structure in percpu memory crossed a page boundary,
which was rejected by the hypervisor
* tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: fix xen_vcpu_info allocation alignment
xen: privcmd: Replace zero-length array with flex-array member and use __counted_by
swiotlb-xen: provide the "max_mapping_size" method
The current offset has the scale already applied to it. The ABI
documentation defines the offset parameter as "offset to be added
to <type>[Y]_raw prior to scaling by <type>[Y]_scale in order to
obtain value in the <type> units as specified in <type>[Y]_raw
documentation"
The right value is obtained at 0 degrees Celsius by the formula provided
in the datasheet:
T = Tsens_t0 + (Tadc_t - Tadc_t0) / Tadc_res
where:
T = 0 degrees Celsius
Tsens_t0 (reference temperature) = 25 degrees Celsius
Tadc_t0 (16-bit format for Tsens_t0) = 17508
Tadc_res = 60.1 LSB/degree Celsius
The resulting offset is 16005.5, which has been truncated to 16005 to
provide an integer value with a precision loss smaller than the 1-LSB
measurement precision.
Fix the offset to apply its value prior to scaling.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/9879beec-05fc-4fc6-af62-d771e238954e@wolfvision.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Previously, in ondemand read scenario, if the anonymous fd was closed by
user daemon, inflight and subsequent read requests would return EIO.
As long as the device connection is not released, user daemon can hold
and restore inflight requests by setting the request flag to
CACHEFILES_REQ_NEW.
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-6-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Don't trigger EPOLLIN when there are only reopening read requests in
xarray.
Suggested-by: Xin Yin <yinxin.x@bytedance.com>
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-5-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When an anonymous fd is closed by user daemon, if there is a new read
request for this file comes up, the anonymous fd should be re-opened
to handle that read request rather than fail it directly.
1. Introduce reopening state for objects that are closed but have
inflight/subsequent read requests.
2. No longer flush READ requests but only CLOSE requests when anonymous
fd is closed.
3. Enqueue the reopen work to workqueue, thus user daemon could get rid
of daemon_read context and handle that request smoothly. Otherwise,
the user daemon will send a reopen request and wait for itself to
process the request.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-4-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We'll introduce a @work_struct field for @object in subsequent patches,
it will enlarge the size of @object.
As the result of that, this commit extracts ondemand info field from
@object.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-3-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Previously, @ondemand_id field was used not only to identify ondemand
state of the object, but also to represent the index of the xarray.
This commit introduces @state field to decouple the role of @ondemand_id
and adds helpers to access it.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-2-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series adds support for handling control (switch/enum) change notifications
sent by the firmware.
The use case is similar to what is already used by IPC3 version: the firmware
can update the value of an enum or switch and sends notification to the kernel,
which in turn will notify the user space of a change.
SND_SOC_IMX_RPMSG should depend on OF and I2C. It fixes the following
error reported by kernel test robot:
ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe':
imx-rpmsg.c:(.text+0x4f): undefined reference to `i2c_find_device_by_fwnode'
Fixes: 5d9f746ca6 ("ASoC: imx-rpmsg: Force codec power on in low power audio mode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311230506.DPF9vvYY-lkp@intel.com/
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20231125065300.6385-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org
Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
... and fix the directory locking documentation and proof of correctness.
Holding ->s_vfs_rename_mutex *almost* prevents ->d_parent changes; the
case where we really don't want it is splicing the root of disconnected
tree to somewhere.
In other words, ->s_vfs_rename_mutex is sufficient to stabilize "X is an
ancestor of Y" only if X and Y are already in the same tree. Otherwise
it can go from false to true, and one can construct a deadlock on that.
Make lock_two_directories() report an error in such case and update the
callers of lock_rename()/lock_rename_child() to handle such errors.
And yes, such conditions are not impossible to create ;-/
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There's only one caller left (lock_two_nondirectories()), and it
needs less complexity. Fold lock_two_inodes() in there and
simplify.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We should never lock two subdirectories without having taken
->s_vfs_rename_mutex; inode pointer order or not, the "order" proposed
in 28eceeda13 "fs: Lock moved directories" is not transitive, with
the usual consequences.
The rationale for locking renamed subdirectory in all cases was
the possibility of race between rename modifying .. in a subdirectory to
reflect the new parent and another thread modifying the same subdirectory.
For a lot of filesystems that's not a problem, but for some it can lead
to trouble (e.g. the case when short directory contents is kept in the
inode, but creating a file in it might push it across the size limit
and copy its contents into separate data block(s)).
However, we need that only in case when the parent does change -
otherwise ->rename() doesn't need to do anything with .. entry in the
first place. Some instances are lazy and do a tautological update anyway,
but it's really not hard to avoid.
Amended locking rules for rename():
find the parent(s) of source and target
if source and target have the same parent
lock the common parent
else
lock ->s_vfs_rename_mutex
lock both parents, in ancestor-first order; if neither
is an ancestor of another, lock the parent of source
first.
find the source and target.
if source and target have the same parent
if operation is an overwriting rename of a subdirectory
lock the target subdirectory
else
if source is a subdirectory
lock the source
if target is a subdirectory
lock the target
lock non-directories involved, in inode pointer order if both
source and target are such.
That way we are guaranteed that parents are locked (for obvious reasons),
that any renamed non-directory is locked (nfsd relies upon that),
that any victim is locked (emptiness check needs that, among other things)
and subdirectory that changes parent is locked (needed to protect the update
of .. entries). We are also guaranteed that any operation locking more
than one directory either takes ->s_vfs_rename_mutex or locks a parent
followed by its child.
Cc: stable@vger.kernel.org
Fixes: 28eceeda13 "fs: Lock moved directories"
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The VFS will not be locking moved directory if its parent does not
change. Change f2fs rename code to avoid reading renamed directory if
its parent does not change. Having it uninlined while we are reading
it would cause trouble and we won't be able to rely upon ->i_rwsem
on the directory being renamed in cases that do not alter its parent.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can't really afford locking the source on same-directory rename;
currently vfs_rename() tries to do that, but it will have to be changed.
The logics in ext4 is lazy and goes looking for ".." in source even in
same-directory case. It's not hard to get rid of that, leaving that
behaviour only for cross-directory case; that VFS can get locks safely
(and will keep doing that after the coming changes).
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The VFS will not be locking moved directory if its parent does not
change. Change ext2 rename code to avoid reading renamed directory if
its parent does not change. Although it is currently harmless it is a
bad practice to read directory contents without inode->i_rwsem.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can't really afford locking the source on same-directory rename;
currently vfs_rename() tries to do that, but it will have to be
changed. The logics in udf_rename() is lazy and goes looking for
".." in source even in same-directory case. It's not hard to get
rid of that, leaving that behaviour only for cross-directory case;
that VFS can get locks safely (and will keep doing that after the
coming changes).
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The VFS will not be locking moved directory if its parent does not
change. Change ocfs2 rename code to avoid touching renamed directory if
its parent does not change as without locking that can corrupt the
filesystem.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The VFS will not be locking moved directory if its parent does not
change. Change reiserfs rename code to avoid touching renamed directory
if its parent does not change as without locking that can corrupt the
filesystem.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
dget_dlock() requires dentry->d_lock to be held when called, yet
contains a NULL check for dentry.
An audit of all calls to dget_dlock() shows that it is never called
with a NULL pointer (as spin_lock()/spin_unlock() would crash in these
cases):
$ git grep -W '\<dget_dlock\>'
arch/powerpc/platforms/cell/spufs/inode.c- spin_lock(&dentry->d_lock);
arch/powerpc/platforms/cell/spufs/inode.c- if (simple_positive(dentry)) {
arch/powerpc/platforms/cell/spufs/inode.c: dget_dlock(dentry);
fs/autofs/expire.c- spin_lock_nested(&child->d_lock, DENTRY_D_LOCK_NESTED);
fs/autofs/expire.c- if (simple_positive(child)) {
fs/autofs/expire.c: dget_dlock(child);
fs/autofs/root.c: dget_dlock(active);
fs/autofs/root.c- spin_unlock(&active->d_lock);
fs/autofs/root.c: dget_dlock(expiring);
fs/autofs/root.c- spin_unlock(&expiring->d_lock);
fs/ceph/dir.c- if (!spin_trylock(&dentry->d_lock))
fs/ceph/dir.c- continue;
[...]
fs/ceph/dir.c: dget_dlock(dentry);
fs/ceph/mds_client.c- spin_lock(&alias->d_lock);
[...]
fs/ceph/mds_client.c: dn = dget_dlock(alias);
fs/configfs/inode.c- spin_lock(&dentry->d_lock);
fs/configfs/inode.c- if (simple_positive(dentry)) {
fs/configfs/inode.c: dget_dlock(dentry);
fs/libfs.c: found = dget_dlock(d);
fs/libfs.c- spin_unlock(&d->d_lock);
fs/libfs.c: found = dget_dlock(child);
fs/libfs.c- spin_unlock(&child->d_lock);
fs/libfs.c: child = dget_dlock(d);
fs/libfs.c- spin_unlock(&d->d_lock);
fs/ocfs2/dcache.c: dget_dlock(dentry);
fs/ocfs2/dcache.c- spin_unlock(&dentry->d_lock);
include/linux/dcache.h:static inline struct dentry *dget_dlock(struct dentry *dentry)
After taking out the NULL check, dget_dlock() becomes almost identical
to __dget_dlock(); the only difference is that dget_dlock() returns the
dentry that was passed in. These are static inline helpers, so we can
rely on the compiler to discard unused return values. We can therefore
also remove __dget_dlock() and replace calls to it by dget_dlock().
Also fix up and improve the kerneldoc comments while we're at it.
Al Viro pointed out that we can also clean up some of the callers to
make use of the returned value and provided a bit more info for the
kerneldoc.
While preparing v2 I also noticed that the tabs used in the kerneldoc
comments were causing the kerneldoc to get parsed incorrectly so I also
fixed this up (including for d_unhashed, which is otherwise unrelated).
Testing: x86 defconfig build + boot; make htmldocs for the kerneldoc
warning. objdump shows there are code generation changes.
Link: https://lore.kernel.org/all/20231022164520.915013-1-vegard.nossum@oracle.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With the new ordering in __dentry_kill() it has become redundant -
it's set if and only if both DCACHE_DENTRY_KILLED and DCACHE_SHRINK_LIST
are set.
We set it in __dentry_kill(), after having set DCACHE_DENTRY_KILLED
with the only condition being that DCACHE_SHRINK_LIST is there;
all of that is done without dropping ->d_lock and the only place
that checks that flag (shrink_dentry_list()) does so under ->d_lock,
after having found the victim on its shrink list. Since DCACHE_SHRINK_LIST
is set only when placing dentry into shrink list and removed only by
shrink_dentry_list() itself, a check for DCACHE_DENTRY_KILLED in
there would be equivalent to check for DCACHE_MAY_FREE.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We only search in the damn thing under hlist_bl_lock(); RCU variant
of insertion was, IIRC, pretty much cargo-culted - mea culpa...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Failing ->fill_super() will be followed by ->kill_sb(), which should
include kill_litter_super() if the call of simple_fill_super() had
been asked to create anything besides the root dentry. So there's
no need to empty the partially populated tree - it will be trimmed
by inevitable kill_litter_super().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Normally d_make_root() is used to create the root dentry of superblock;
here we use it for a different purpose, but... idiomatic or not, we
need the same operation.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
now that the only user of d_instantiate_anon() is gone...
[braino fix folded - kudos to Dan Carpenter]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fast_dput() contains a small piece of code, preceded by scary
comments about 5 times longer than it. What is actually done there is
a trimmed-down subset of retain_dentry() - in some situations we can
tell that retain_dentry() would have returned true without ever needing
->d_lock and that's what that code checks. If these checks come true
fast_dput() can declare that we are done, without bothering with ->d_lock;
otherwise it has to take the lock and do full variant of retain_dentry()
checks.
Trimmed-down variant of the checks is hard to follow and
it's asking for trouble - if we ever decide to change the rules in
retain_dentry(), we'll have to remember to update that code. It turns
out that an equivalent variant of these checks more obviously parallel
to retain_dentry() is not just possible, but easy to unify with
retain_dentry() itself, passing it a new boolean argument ('locked')
to distinguish between the full semantics and trimmed down one.
Note that in lockless case true is returned only when locked
variant would have returned true without ever needing the lock; false
means "punt to the locking path and recheck there".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
