xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.
Address this by propagating correct information.
Fixes: 7c12aa0877 ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The existing implementation uses software logic to accumulate tx
completions until the specified time (1ms) is met and then poll them.
However, there exists a tiny gap which leads to a race between
resetting and checking the tx_activate flag. Due to this the tx
completions are not reported to upper layer and tx queue timeout
kicks-in restarting the device.
To address this, introduce a tx cleanup mechanism as part of the
periodic maintenance process.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY
configurations needs PLL to be enabled while doing mode set. When the
SFP module isn't connected during boot, driver assumes AN is ON and
attempts auto-negotiation. However, if the connected SFP comes up in
Fixed PHY configuration the link will not come up as PLL isn't enabled
while the initial mode set command is issued. So, force the mode change
for SFI in Fixed PHY configuration to fix link issues.
Fixes: e57f7a3fea ("amd-xgbe: Prepare for working with more than one type of phy")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The variable dot11d_info->channel_map is initialized in dot11d_init() and
in dot11d_channel_map(). dot11d_init() is called only once just before
dot11d_channel_map(). Therefore dot11d_init() can be removed.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/d2e8d81ec9eefc7b7eeb9f6fd6a28b28db6b40f0.1700431464.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable "enabled" is initialized to false and never changed. Therefore
IS_DOT11D_ENABLE(ieee) returns always false. Because of this all code in
rtllib_extract_country_ie() is never executed.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/7b88c62d3cc5c3fb670b5448c7381c7c099b3518.1700431464.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a polling mechanism that will keep the driver operational even in
absence of physical IRQ connection. If IRQ line is detected, the driver
will continue working as usual, in case of missing IRQ line it will
fallback to the polling mechanism introduced in this change.
This will support users which choose not to connect an IRQ line as it
is not critical to part's operation.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231123090658.10418-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.
The relation of phy clock is:
sai_pll_ref_sel
sai_pll
sai_pll_bypass
sai_pll_out
sai_pll_out_div2
earc_phy_cg
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1700702093-8008-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the machine compatible and topology filename for the Google Steelix
MT8186 Chromebook to load the correct SOF topology file.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123084454.20471-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change to address pops and clicks with codecs like WSA883X
touched the same code paths as a fix for clearing DAI parameters and
resulted in a bad merge.
Specifically, commit f0220575e6 ("ASoC: soc-dai: add flag to mute and
unmute stream during trigger") made mute at stream close conditional,
while commit 3efcb471f8 ("ASoC: soc-pcm.c: Make sure DAI parameters
cleared if the DAI becomes inactive") moved that same mute call back to
soc_pcm_hw_clean().
Fix up the bad merge by dropping the second mute call from
soc_pcm_clean() and making sure that the call in soc_pcm_hw_clean() is
conditional as intended.
Fixes: bdb7e19220 ("ASoC: Merge up workaround for CODECs that play noise on stopped stream")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231123091815.21933-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The (TRY_)DECODER_CMD ioctls are only useful for stateful decoders and for
stateless decoders that support holding capture buffers (which is not the
case for this driver).
Disable them when registering the stateless decoder.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Google Dexi device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.
Signed-off-by: Ken Lin <ken_lin5@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The current TODO list of the cedrus driver is now outdated as most of the
points it mentions were already tackled. In addition it is no longer
considered relevant to wait for a stateless encoder driver to move it out
of staging. The hantro/verisilicon driver was already unstaged without this
condition.
However the driver suffers from a bad initial design that showed to be very
limiting. It was also not a very good fit for a video codec driver either.
Since a rework of the driver was already carried out for the purpose of
adding encoding support, update the TODO list with a description of the
rework. This reworked driver will be published soon and transitional
commits from the current driver will be submitted upstreamer after that.
It seems best to wait for the rework to land upstream before unstaging the
driver, since a major rework is best operated on a staging driver instead
of a fully upstream one.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If probe is reached, we've already matched the device and in the case of
DT matching, the struct device_node pointer will be set. Therefore, there
is no need to call of_match_device() in probe.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In mtk_jpegdec_worker, if error occurs in mtk_jpeg_set_dec_dst, it
will start the timeout worker and invoke v4l2_m2m_job_finish at
the same time. This will break the logic of design for there should
be only one function to call v4l2_m2m_job_finish. But now the timeout
handler and mtk_jpegdec_worker will both invoke it.
Fix it by start the worker only if mtk_jpeg_set_dec_dst successfully
finished.
Fixes: da4ede4b7f ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work.
In mtk_jpeg_dec_device_run, if error happens in
mtk_jpeg_set_dec_dst, it will finally start the worker while
mark the job as finished by invoking v4l2_m2m_job_finish.
There are two methods to trigger the bug. If we remove the
module, it which will call mtk_jpeg_remove to make cleanup.
The possible sequence is as follows, which will cause a
use-after-free bug.
CPU0 CPU1
mtk_jpeg_dec_... |
start worker |
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
If we close the file descriptor, which will call mtk_jpeg_release,
it will have a similar sequence.
Fix this bug by starting timeout worker only if started jpegdec worker
successfully. Then v4l2_m2m_job_finish will only be called in
either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.
Fixes: b2f0d2724b ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch reverts commit c677d7ae83
("media: mtk-jpeg: Fix use after free bug due to uncanceled work").
The job_timeout_work is initialized only for
the single-core JPEG device so it will cause the crash for multi-core
JPEG devices.
Fix it by removing the cancel_delayed_work_sync function.
Fixes: c677d7ae83 ("media: mtk-jpeg: Fix use after free bug due to uncanceled work")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Recently a WARN_ON was added in v4l2-subdev.c to warn if s_stream was
called unnecessarily. The ivtv driver hits this once when it is loaded for
the first time. Add a bool to avoid this warning.
[hverkuil: added a comment for the sd_video_is_streaming field]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert the three tegra-video drivers from always returning
zero in the remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Upon module load, a kthread is created targeting the
pvr2_context_thread_func function, which may call pvr2_context_destroy
and thus call kfree() on the context object. However, that might happen
before the usb hub_event handler is able to notify the driver. This
patch adds a sanity check before the invalid read reported by syzbot,
within the context disconnection call stack.
Reported-and-tested-by: syzbot+621409285c4156a009b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a02a4205fff8eb92@google.com/
Fixes: e5be15c638 ("V4L/DVB (7711): pvrusb2: Fix race on module unload")
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
