Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Reviewed-by: Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Joseph Liu <kwliu@nuvoton.com>
CC: Marvin Lin <kflin@nuvoton.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
While at it, check the return value of vb2_get_buffer().
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
CC: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Steve Longerbeam <slongerbeam@gmail.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
If 'min_buffers_needed' is set remove useless checks in queue setup
functions.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
CC: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Rui Miguel Silva <rmfrfs@gmail.com>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
CC: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Fix the number of buffers computation at the same time.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
CC: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
CC: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Additional data length in the attestation request is an in/out variable.
Software provides the capacity of the buffer. Upon successful request,
firmware reports the actual bytes written to the additional data in that
field. This information is lost, as the length field was not copied back
to userspace before. Attestation might fail, if user space did not
specify the exact amount of needed bytes required, as this length is
part of the attestation measurement.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20231106124922.3032370-1-seiden@linux.ibm.com
Message-Id: <20231106124922.3032370-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Sergey Kozlov <serjk@netup.ru>
CC: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Sergey Kozlov <serjk@netup.ru>
CC: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
min_buffers_needed is already set to 2 so remove this useless
check.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The above memset already zeroed all the ctx fields, it is useless
to do it here again.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_buffer() instead of direct access to the vb2_queue bufs array.
This allows us to change the type of the bufs in the future.
After each call to vb2_get_buffer() we need to be sure that we get
a valid pointer so check the return value of all of them.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
CC: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_buffer() instead of direct access to the vb2_queue bufs array.
This allows us to change the type of the bufs in the future.
No need to check the result of vb2_get_buffer, vb2_ioctl_dqbuf() already
checked that it is valid.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
CC: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_buffer() instead of direct access to the vb2_queue bufs array.
This allows us to change the type of the bufs in the future.
After each call to vb2_get_buffer() we need to be sure that we get
a valid pointer so check the return value of all of them.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Niklas Söderlund says:
====================
net: ethernet: renesas: rcar_gen4_ptp: Add V4H support
This small series prepares the rcar_gen4_ptp to be useable both on both
R-Car S4 and V4H. The only in-tree driver that make use of this is
rswtich on S4. A new Ethernet (R-Car Ethernet TSN) driver for V4H is on
it's way that also will make use of rcar_gen4_ptp functionality.
Patch 1-2 are small improvements to the existing driver. While patch 3-4
adds V4H support. Finally patch 5 turns rcar_gen4_ptp into a separate
module to allow the gPTP functionality to be shared between the two
users without having to duplicate the code in each.
See each patch for changelog.
====================
Link: https://lore.kernel.org/r/20231121155306.515446-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Gen4 gPTP support will be shared between the existing Renesas
Ethernet Switch driver and the upcoming Renesas Ethernet-TSN driver. In
preparation for this break out the gPTP support to its own module.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of using hard coded clock increment values for each SoC derive
the clock increment from the module clock. This is done in preparation
to support a second platform, R-Car V4H that uses a 200Mhz clock
compared with the 320Mhz clock used on R-Car S4.
Tested on both SoCs,
S4 reports a clock of 320000000Hz which gives a value of 0x19000000.
Documentation says a 320Mhz clock is used and the correct increment for
that clock is 0x19000000.
V4H reports a clock of 199999992Hz which gives a value of 0x2800001a.
Documentation says a 200Mhz clock is used and the correct increment for
that clock is 0x28000000.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All known R-Car Gen4 SoC share the same register layout, rename the
R-Car S4 specific identifiers so they can be shared with the upcoming
R-Car V4H support.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of printing a warning and proceeding with an unknown register
layout return an error. The only call site is already prepared to
propagate the error.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The comments intent was to indicates which function uses the enum. While
upstreaming rcar_gen4_ptp the function was renamed but this comment was
left with the old function name.
Instead of correcting the comment remove it, it adds little value.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove index range test since it is done by vb2_get_buffer().
vb2_get_buffer() can return a NULL pointer so we need the return
value.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
CC: Jean-Christophe Trotin <jean-christophe.trotin@foss.st.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Bin Liu <bin.liu@mediatek.com>
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Simplify code by removing useless loop by using video buffer index.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Bin Liu <bin.liu@mediatek.com>
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_buffer() instead of direct access to the vb2_queue bufs array.
This allows us to change the type of the bufs in the future.
After each call to vb2_get_buffer() we need to be sure that we get
a valid pointer so check the return value of all of them.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Bin Liu <bin.liu@mediatek.com>
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ming Qian <ming.qian@nxp.com>
CC: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_buffer() instead of direct access to the vb2_queue bufs array.
This allows us to change the type of the bufs in the future.
After each call to vb2_get_buffer() we need to be sure that we get
a valid pointer so check the return value of all of them.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ming Qian <ming.qian@nxp.com>
CC: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stop using queue num_buffers field directly, instead use
vb2_get_num_buffers().
This prepares for the future 'delete buffers' feature where there are
holes in the buffer indices.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In the future a side effect of introducing DELETE_BUFS ioctl is
the create of 'holes' (i.e. unused buffers) in bufs arrays.
To know which entries of the bufs arrays are used a bitmap will
be added in struct vb2_queue. That will also mean that the number
of buffers will be computed given the number of bit set in this bitmap.
To smoothly allow this evolution all drives must stop using
directly num_buffers field from struct vb2_queue.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
vb2_get_buffer() already checks if the requested index is valid.
Stop duplicating this kind of check everywhere.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch adds 2 helpers functions to add and remove vb2 buffers
from a queue. With these 2 and vb2_get_buffer(), bufs field of
struct vb2_queue becomes like a private member of the structure.
After each call to vb2_get_buffer() we need to be sure that we get
a valid pointer in preparation for when buffers can be deleted.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Directly use vb2_buffer pointer instead of index inside queue array.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Only report unbalanced queue counters do avoid spamming kernel log
with useless information.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Change how offset 'cookie' field value is computed to make possible
to use more buffers.
The maximum number of buffers depends of PAGE_SHIFT value and can
go up to 0x7fff when PAGE_SHIFT = 12.
With this encoding pattern we know the maximum number that a queue
could store so we can check it at queue init time.
It also make easier and faster to find buffer and plane from using
the offset field.
Change __find_plane_by_offset() prototype to return the video buffer
itself rather than it index.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The arch_jump_label_transform_static() function in csky was originally meant to
override the generic __weak function, but that got changed to an #ifndef check.
This showed up as a missing-prototype warning:
arch/csky/kernel/jump_label.c:43:6: error: no previous prototype for 'arch_jump_label_transform_static' [-Werror=missing-prototypes]
Change the method to use the new method of having a #define and a prototype
for the global function.
Fixes: 7e6b9db27d ("jump_label: make initial NOP patching the special case")
Fixes: 4e8bb4ba5a ("csky: Add jump-label implementation")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
do_page_fault() is missing a declaration on a couple of architectures:
arch/alpha/mm/fault.c:85:1: error: no previous prototype for 'do_page_fault' [-Werror=missing-prototypes]
arch/csky/mm/fault.c:187:17: error: no previous prototype for 'do_page_fault' [-Werror=missing-prototypes]
arch/mips/mm/fault.c:323:17: error: no previous prototype for 'do_page_fault' [-Werror=missing-prototypes]
arch/nios2/mm/fault.c:43:17: error: no previous prototype for 'do_page_fault' [-Werror=missing-prototypes]
arch/sh/mm/fault.c:389:27: error: no previous prototype for 'do_page_fault' [-Werror=missing-prototypes]
Since the calling conventions are architecture specific here,
add separate prototypes for each one.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The prototype for prepare_ftrace_return() is architecture specific and
can't be in a global header. Since it's normally called from assembly,
it doesn't really need a prototype, but we get a warning if it's missing:
arch/csky/kernel/ftrace.c:147:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes]
arch/microblaze/kernel/ftrace.c:22:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes]
arch/mips/kernel/ftrace.c:305:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes]
Add the prototypes for the three architectures that don't already have
one in asm/ftrace.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The VDSO functions are defined as globals in the kernel sources but intended
to be called from userspace, so there is no need to declare them in a kernel
side header.
Without a prototype, this now causes warnings such as
arch/mips/vdso/vgettimeofday.c:14:5: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:28:5: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:36:5: error: no previous prototype for '__vdso_clock_getres' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:42:5: error: no previous prototype for '__vdso_clock_gettime64' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:254:1: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:282:1: error: no previous prototype for '__vdso_clock_gettime_stick' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:307:1: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:343:1: error: no previous prototype for '__vdso_gettimeofday_stick' [-Werror=missing-prototypes]
Most architectures have already added workarounds for these by adding
declarations somewhere, but since these are all compatible, we should
really just have one copy, with an #ifdef check for the 32-bit vs
64-bit variant and use that everywhere.
Unfortunately, the sparc an um versions are currently incompatible
since they never added support for __vdso_clock_gettime64() in 32-bit
userland. For the moment, I'm leaving this one out, as I can't
easily test it and it requires a larger rework.
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
some architectures run into a -Wmissing-prototypes warning
for trap_init()
arch/microblaze/kernel/traps.c:21:6: warning: no previous prototype for 'trap_init' [-Wmissing-prototypes]
Include the right header to avoid this consistently, removing
the extra declarations on m68k and x86 that were added as local
workarounds already.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When -Wmissing-prototypes is enabled, the some asm-offsets.c files fail
to build, even when this warning is disabled in the Makefile for normal
files:
arch/sparc/kernel/asm-offsets.c:22:5: error: no previous prototype for 'sparc32_foo' [-Werror=missing-prototypes]
arch/sparc/kernel/asm-offsets.c:48:5: error: no previous prototype for 'foo' [-Werror=missing-prototypes]
Address this by making use of the same trick as x86, marking these
functions as 'static __used' to avoid the need for a prototype
by not drop them in dead-code elimination.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/lkml/CAK7LNARfEmFk0Du4Hed19eX_G6tUC5wG0zP+L1AyvdpOF4ybXQ@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
