The prototype was hidden in an #ifdef on x86, which causes a warning:
kernel/irq_work.c:72:13: error: no previous prototype for 'arch_irq_work_raise' [-Werror=missing-prototypes]
Some architectures have a working prototype, while others don't.
Fix this by providing it in only one place that is always visible.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the max value that has already been computed inside sugov_get_util()
to cap the iowait boost and remove dependency with uclamp_rq_util_with()
which is not used anymore.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231122133904.446032-3-vincent.guittot@linaro.org
The current method to take into account uclamp hints when estimating the
target frequency can end in a situation where the selected target
frequency is finally higher than uclamp hints, whereas there are no real
needs. Such cases mainly happen because we are currently mixing the
traditional scheduler utilization signal with the uclamp performance
hints. By adding these 2 metrics, we loose an important information when
it comes to select the target frequency, and we have to make some
assumptions which can't fit all cases.
Rework the interface between the scheduler and schedutil governor in order
to propagate all information down to the cpufreq governor.
effective_cpu_util() interface changes and now returns the actual
utilization of the CPU with 2 optional inputs:
- The minimum performance for this CPU; typically the capacity to handle
the deadline task and the interrupt pressure. But also uclamp_min
request when available.
- The maximum targeting performance for this CPU which reflects the
maximum level that we would like to not exceed. By default it will be
the CPU capacity but can be reduced because of some performance hints
set with uclamp. The value can be lower than actual utilization and/or
min performance level.
A new sugov_effective_cpu_perf() interface is also available to compute
the final performance level that is targeted for the CPU, after applying
some cpufreq headroom and taking into account all inputs.
With these 2 functions, schedutil is now able to decide when it must go
above uclamp hints. It now also has a generic way to get the min
performance level.
The dependency between energy model and cpufreq governor and its headroom
policy doesn't exist anymore.
eenv_pd_max_util() asks schedutil for the targeted performance after
applying the impact of the waking task.
[ mingo: Refined the changelog & C comments. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231122133904.446032-2-vincent.guittot@linaro.org
Rename 'off' parameter to 'offset' to clarify the code.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lukasz Luba reported that a thread's util_est can significantly decrease as
a result of sharing the CPU with other threads.
The use case can be easily reproduced with a periodic task TA that runs 1ms
and sleeps 100us. When the task is alone on the CPU, its max utilization and
its util_est is around 888. If another similar task starts to run on the
same CPU, TA will have to share the CPU runtime and its maximum utilization
will decrease around half the CPU capacity (512) then TA's util_est will
follow this new maximum trend which is only the result of sharing the CPU
with others tasks.
Such situation can be detected with runnable_avg wich is close or
equal to util_avg when TA is alone, but increases above util_avg when TA
shares the CPU with other threads and wait on the runqueue.
[ We prefer an util_est that overestimate rather than under estimate
because in 1st case we will not provide enough performance to the
task which will remain under-provisioned, whereas in the other case we
will create some idle time which will enable to reduce contention and
as a result reduces the util_est so the overestimate will be transient
whereas the underestimate will remain. ]
[ mingo: Refined the changelog, added comments from the LKML discussion. ]
Reported-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/lkml/CAKfTPtDd-HhF-YiNTtL9i5k0PfJbF819Yxu4YquzfXgwi7voyw@mail.gmail.com/#t
Link: https://lore.kernel.org/r/20231122140119.472110-1-vincent.guittot@linaro.org
Cc: Hongyan Xia <hongyan.xia2@arm.com>
On 64-bit platforms, the pfn_to_kaddr() macro requires that the input
value is 64 bits in order to ensure that valid address bits don't get
lost when shifting that input by PAGE_SHIFT to calculate the physical
address to provide a virtual address for.
One such example is in pvalidate_pages() (used by SEV-SNP guests), where
the GFN in the struct used for page-state change requests is a 40-bit
bit-field, so attempts to pass this GFN field directly into
pfn_to_kaddr() ends up causing guest crashes when dealing with addresses
above the 1TB range due to the above.
Fix this issue with SEV-SNP guests, as well as any similar cases that
might cause issues in current/future code, by using an inline function,
instead of a macro, so that the input is implicitly cast to the
expected 64-bit input type prior to performing the shift operation.
While it might be argued that the issue is on the caller side, other
archs/macros have taken similar approaches to deal with instances like
this, such as ARM explicitly casting the input to phys_addr_t:
e48866647b ("ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()")
A C inline function is even better though.
[ mingo: Refined the changelog some more & added __always_inline. ]
Fixes: 6c32117963 ("x86/sev: Add SNP-specific unaccepted memory support")
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231122163700.400507-1-michael.roth@amd.com
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other and pull in various other headers. In
preparation to fix this, adjust the includes for what is actually needed.
platform_device.h is implicitly included by of_platform.h, but that's going
to be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
With the original owner of APPLE_MAILBOX removed, let's rename the new
APPLE_MBOX to the old name. This avoids .config churn for downstream
users, and leaves us with an identical config symbol and module name as
before.
Acked-by: Eric Curtin <ecurtin@redhat.com>
Acked-by: Neal Gompa <neal@gompa.dev>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Hector Martin <marcan@marcan.st>
This driver is now orphaned and superseded by
drivers/soc/apple/mailbox.c.
Acked-by: Eric Curtin <ecurtin@redhat.com>
Acked-by: Neal Gompa <neal@gompa.dev>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Hector Martin <marcan@marcan.st>
Now that we have a mailbox driver in drivers/soc/apple, port the RTKit
code to it. This mostly just entails replacing calls through the mailbox
subsystem with direct calls into the driver.
Acked-by: Eric Curtin <ecurtin@redhat.com>
Acked-by: Neal Gompa <neal@gompa.dev>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Hector Martin <marcan@marcan.st>
This new driver is based on the existing apple-mailbox driver, but
replaces the usage of the mailbox subsystem with directly exported
symbols.
As part of this refactor, this adds support for using the hardware FIFOs
(not supported in mailbox) and implicitly fixes a bunch of bugs caused
by bad interactions with the mailbox subsystem. It also adds runtime-PM
support.
The new config symbol is APPLE_MBOX, while the module name remains
identical ("apple-mailbox"). The configs are mutually exclusive in
Kconfig, to avoid conflicts.
Acked-by: Eric Curtin <ecurtin@redhat.com>
Acked-by: Neal Gompa <neal@gompa.dev>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Hector Martin <marcan@marcan.st>
It is fundamentally broken and has no users. Just remove it.
Acked-by: Eric Curtin <ecurtin@redhat.com>
Acked-by: Neal Gompa <neal@gompa.dev>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Hector Martin <marcan@marcan.st>
Commit 1e8f93e183 ("x86: Consolidate port I/O helpers") moved some
port I/O helpers to <asm/shared/io.h>, which caused the 'bw' parameter
in the BUILDIO() macro to become unused. Remove it.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231123034911.217791-1-ytcoode@gmail.com
MIPS is the last architecture that is yet to start using asm-generic/io.h,
so Baoquan He converts it, which allows the other changes to remove code
duplication, and it will allow further cleanups in the future.
* asm-generic-io.h-cleanup:
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
uapi headers should not expose CONFIG switches since they are not
available in userspace. Fix it in arch/hexagon/include/uapi/asm/user.h
by always defining the cs0 and cs1 entries instead of pad values.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
By adding <asm-generic/io.h> support, the duplicated phys_to_virt
can be removed to use the default version in <asm-gneneric/io.h>.
Meanwhile move isa_bus_to_virt() down below <asm-generic/io.h> including
to fix the compiling error of missing phys_to_virt definition.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ioremap_uc() is only meaningful on old x86-32 systems with the PAT
extension, and on ia64 with its slightly unconventional ioremap()
behavior. So remove the ioremap_uc() definition in architecutures
other than x86 and ia64. These architectures all have asm-generic/io.h
included and will have the default ioremap_uc() definition which
returns NULL.
This changes the existing behaviour, while no need to worry about
any breakage because in the only callsite of ioremap_uc(), code
has been adjusted to eliminate the impact. Please see
atyfb_setup_generic() of drivers/video/fbdev/aty/atyfb_base.c.
If any new invocation of ioremap_uc() need be added, please consider
using ioremap() intead or adding a ARCH specific version if necessary.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> (SuperH)
Cc: linux-alpha@vger.kernel.org
Cc: linux-hexagon@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the adding, some default ioremap_xx methods defined in
asm-generic/io.h can be used. E.g the default ioremap_uc() returning
NULL.
We also massaged various headers to avoid nested includes.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[jiaxun.yang@flygoat.com: Massage more headers, fix ioport defines]
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AM62x has 3 SPI channels where each channel has 4 TX and 4 RX threads.
This also fixes the thread numbers.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 5ac6bfb587 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20231030190113.16782-1-rwahl@gmx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
xen_vcpu_info is a percpu area than needs to be mapped by Xen.
Currently, it could cross a page boundary resulting in Xen being unable
to map it:
[ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164!
[ 0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Fix the issue by using __alloc_percpu and requesting alignment for the
memory allocation.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop
Fixes: 24d5373dda ("arm/xen: Use alloc_percpu rather than __alloc_percpu")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Add documentation for the UAPI.
Changes since v5:
- Remove obsolete VM documentation
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/76a7b18cfbe93066efcee3311ae795176ce7c65d.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Firmware trace is exposed at /sys/debug/dri/<dev_nr>/pvr_fw/trace_0.
Trace is enabled via the group mask at
/sys/debug/dri/<dev_nr>/pvr_params/fw_trace_mask.
Changes since v8:
- Corrected license identifiers
Changes since v3:
- Use drm_dev_{enter,exit}
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Link: https://lore.kernel.org/r/009cf9fee347fa96c8a665dc368fc54a5ffceff0.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Implement job submission ioctl. Job scheduling is implemented using
drm_sched.
Jobs are submitted in a stream format. This is intended to allow the UAPI
data format to be independent of the actual FWIF structures in use, which
vary depending on the GPU in use.
The stream formats are documented at:
f8d2b42ae6/src/imagination/csbgen/rogue_kmd_stream.xml
Changes since v8:
- Updated for upstreamed DRM scheduler changes
- Removed workaround code for the pending_list previously being updated
after run_job() returned
- Fixed null deref in pvr_queue_cleanup_fw_context() for bad stream ptr
given to create_context ioctl
- Corrected license identifiers
Changes since v7:
- Updated for v8 "DRM scheduler changes for XE" patchset
Changes since v6:
- Fix fence handling in pvr_sync_signal_array_add()
- Add handling for SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE flag
- Fix missing dma_resv locking in job submit path
Changes since v5:
- Fix leak in job creation error path
Changes since v4:
- Use a regular workqueue for job scheduling
Changes since v3:
- Support partial render jobs
- Add job timeout handler
- Split sync handling out of job code
- Use drm_dev_{enter,exit}
Changes since v2:
- Use drm_sched for job scheduling
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Link: https://lore.kernel.org/r/c98dab7a5f5fb891fbed7e4990d19b5d13964365.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Implement ioctls for the creation and destruction of contexts. Contexts are
used for job submission and each is associated with a particular job type.
Changes since v8:
- Fixed one error path in pvr_stream_process_1()
- Corrected license identifiers
Changes since v5:
- Fix context release in final error path in pvr_context_create()
Changes since v3:
- Use drm_dev_{enter,exit}
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Link: https://lore.kernel.org/r/ac474a1f7dda2582d290798e4837140a2989aa2a.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Implement ioctls to create and destroy free lists and HWRT datasets. Free
lists are used for GPU-side memory allocation during geometry processing.
HWRT datasets are the FW-side structures representing render targets.
Changes since v8:
- Corrected license identifiers
Changes since v6:
- Fix out-of-bounds shift in get_cr_multisamplectl_val()
Changes since v4:
- Remove use of drm_gem_shmem_get_pages()
Changes since v3:
- Support free list grow requests from FW
- Use drm_dev_{enter,exit}
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Link: https://lore.kernel.org/r/919358c5887a7628da588c455a5bb7e3ea4b47ae.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add support for the MIPS firmware processor, used in the Series AXE GPU.
The MIPS firmware processor uses a separate MMU to the rest of the GPU, so
this patch adds support for that as well.
Changes since v8:
- Corrected license identifiers
Changes since v6:
- Fix integer overflow in VM map error path
Changes since v5:
- Use alloc_page() when allocating MIPS pagetable
Changes since v3:
- Get regs resource (removed from GPU resources commit)
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Link: https://lore.kernel.org/r/a114f7b3e97cb07460c7f2842901716a9207b0c4.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The infrastructure includes parsing of the firmware image, initialising
FW-side structures, handling the kernel and firmware command
ringbuffers and starting & stopping the firmware processor.
This patch also adds the necessary support code for the META firmware
processor.
Changes since v8:
- Fix documentation for pvr_fwccb_process()
- Corrected license identifiers
Changes since v6:
- Add a minimum retry count to pvr_kccb_reserve_slot_sync()
Changes since v5:
- Add workaround for BRN 71242
- Attempt to recover GPU on MMU flush command failure
Changes since v4:
- Remove use of drm_gem_shmem_get_pages()
- Remove interrupt resource name
Changes since v3:
- Hard reset FW processor on watchdog timeout
- Switch to threaded IRQ
- Rework FW object creation/initialisation to aid hard reset
- Added MODULE_FIRMWARE()
- Use drm_dev_{enter,exit}
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Link: https://lore.kernel.org/r/bb52a8dc84f296b37dc6668dfe8fbaf2ba551139.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add power management to the driver, using runtime pm. The power off
sequence depends on firmware commands which are not implemented in this
patch.
Changes since v8:
- Corrected license identifiers
Changes since v5:
- Use RUNTIME_PM_OPS() to declare PM callbacks
- Add Kconfig dependency on CONFIG_PM
Changes since v4:
- Suspend runtime PM before unplugging device on rmmod
Changes since v3:
- Don't power device when calling pvr_device_gpu_fini()
- Documentation for pvr_dev->lost has been improved
- pvr_power_init() renamed to pvr_watchdog_init()
- Use drm_dev_{enter,exit}
Changes since v2:
- Use runtime PM
- Implement watchdog
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/e09af4ef1ff514e1d6d7f97c7c5032c643c56f9c.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a GEM implementation based on drm_gem_shmem, and support code for the
PowerVR GPU MMU. The GPU VA manager is used for address space management.
Changes since v8:
- Updated for changes to drm_gpuvm
- Switched to dma_resv locking for vm ops
- Removed linked lists for collecting BOs in vm_context and for freeing
after ops. This is now done internally in drm_gpuvm
- Corrected license identifiers
Changes since v7:
- kernel-doc fixes
- Remove prefixes from DRM_PVR_BO_* flags
- CREATE_BO ioctl now returns an error if provided size isn't page aligned
- Optimised MMU flushes
Changes since v6:
- Don't initialise kernel_vm_ctx when using MIPS firmware processor
- Rename drm_gpuva_manager uses to drm_gpuvm
- Sync GEM object to device on creation
Changes since v5:
- Use WRITE_ONCE() when writing to page tables
- Add memory barriers to page table insertion
- Fixed double backing page alloc on page table objects
- Fix BO mask checks in DRM_IOCTL_PVR_CREATE_BO handler
- Document use of pvr_page_table_*_idx when preallocing page table objs
- Remove pvr_vm_gpuva_mapping_init()
- Remove NULL check for unmap op in remap function
- Protect gem object with mutex during drm_gpuva_link/unlink
- Defer free or release of page table pages until after TLB flush
- Use drm_gpuva_op_remap_get_unmap_range() helper
Changes since v4:
- Correct sync function in vmap/vunmap function documentation
- Update for upstream GPU VA manager
- Fix missing frees when unmapping drm_gpuva objects
- Always zero GEM BOs on creation
Changes since v3:
- Split MMU and VM code
- Register page table allocations with kmemleak
- Use drm_dev_{enter,exit}
Changes since v2:
- Use GPU VA manager
- Use drm_gem_shmem
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Link: https://lore.kernel.org/r/3c96dd170efe759b73897e3675d7310a7c4b06d0.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Read the GPU ID register at probe time and select the correct
features/quirks/enhancements. Use the GPU ID to form the firmware
file name and load the firmware.
The features/quirks/enhancements arrays are currently hardcoded in
the driver for the supported GPUs. We are looking at moving this
information to the firmware image.
Changes since v8:
- Corrected license identifiers
Changes since v7:
- Fix kerneldoc for pvr_device_info_set_enhancements()
Changes since v5:
- Add BRN 71242 to device info
Changes since v4:
- Retrieve device information from firmware header
- Pull forward firmware header parsing from FW infrastructure patch
- Use devm_add_action_or_reset to release firmware
Changes since v3:
- Use drm_dev_{enter,exit}
Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Link: https://lore.kernel.org/r/1ff76f7a5b45c742279c78910f8491b8a5e7f6e6.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Changes since v8:
- Corrected license identifiers
Changes since v7:
- Add padding to struct rogue_fwif_ccb_ctl to place read and write offsets
in different cache lines
Changes since v5:
- Split up header commit due to size
- Add BRN 71242 to device info
Changes since v4:
- Add FW header device info
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/aa681533a02bd2d46af17a6a6010f4d6048fbb0a.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Changes since v8:
- Corrected license identifiers
Changes since v5:
- Split up header commit due to size
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/9f1fbf6c18e9644ac10712e05893701f06aee6ae.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Acquire clock and register resources, and enable/map as appropriate.
Changes since v8:
- Corrected license identifiers
Changes since v3:
- Remove regulator resource (not used on supported platform)
- Use devm helpers
- Use devm_clk_get_optional() for optional clocks
- Don't prepare clocks on resource acquisition
- Drop pvr_device_clk_core_get_freq() helper
- Drop pvr_device_reg_fini()
- Drop NULLing of clocks in pvr_device_clk_init()
- Use dev_err_probe() on clock acquisition failure
- Remove PVR_CR_READ/WRITE helper macros
- Improve documentation for GPU clocks
- Remove regs resource (not used in this commit)
Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/579027bd5be4eb3218c9784050ded2326ecbc352.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This adds the basic skeleton of the driver. The driver registers
itself with DRM on probe. Ioctl handlers are currently implemented
as stubs.
Changes since v8:
- Corrected license identifiers
Changes since v5:
- Update compatible string & description to match marketing name
- Checkpatch fixes in to/from_pvr_device/file macros
Changes since v3:
- Clarify supported GPU generations in driver description
- Use drm_dev_unplug() when removing device
- Change from_* and to_* functions to macros
- Fix IS_PTR/PTR_ERR confusion in pvr_probe()
- Remove err_out labels in favour of direct returning
- Remove specific am62 compatible match string
- Drop MODULE_FIRMWARE()
Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/fed8a77e29620a61aed2684f802339759082cf1b.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add the UAPI implementation for the PowerVR driver.
Changes from v8:
- Fixed documentation for unmapping, which previously suggested the
size was not used
- Corrected license identifier
Changes from v7:
- Remove prefixes from DRM_PVR_BO_* flags
- Improve struct drm_pvr_ioctl_create_hwrt_dataset_args documentation
- Remove references to static area carveouts
- CREATE_BO ioctl now returns an error if provided size isn't page aligned
- Clarify documentation for DRM_PVR_STATIC_DATA_AREA_EOT
Changes from v6:
- Add padding to struct drm_pvr_dev_query_gpu_info
- Improve BYPASS_CACHE flag documentation
- Add SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE flag
Changes from v4:
- Remove CREATE_ZEROED flag for BO creation (all buffers are now zeroed)
Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://lore.kernel.org/r/8c95a3a1d685e2b44d361b95a19eae5a478fb9d1.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add the device tree binding documentation for the IMG AXE GPU used in
TI AM62 SoCs.
Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/deb0a4659423a3b8a74addee7178b6df7679575d.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Determining the start and range of the unmap stage of a remap op is a
common piece of code currently implemented by multiple drivers. Add a
helper for this.
Changes since v7:
- Renamed helper to drm_gpuva_op_remap_to_unmap_range()
- Improved documentation
Changes since v6:
- Remove use of __always_inline
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/8a0a5b5eeec459d3c60fcdaa5a638ad14a18a59e.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
sizes.h has a gap in defines between SZ_32G and SZ_64T. Add the missing
defines so they can be used in drivers.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/58b227d96f27859b453caf0ceaaac81a6616304b.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Set GENPD_FLAG_ACTIVE_WAKEUP for all RPM power domains so that power
domains necessary for wakeup/"awake path" devices are kept on across
suspend.
This is needed for example for the *_AO ("active-only") variants of the
RPMPDs used by the CPU. Those should maintain their votes also across
system suspend to ensure the CPU can keep running for the whole suspend
process (ending in a firmware call). When the RPM firmware detects that
the CPUs are in a deep idle state it will drop those votes automatically.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>From the Linux point of view, the power domains used by the CPU must
stay always-on. This is because we still need the CPU to keep running
until the last instruction, which will typically be a firmware call that
shuts down the CPU cleanly.
At the moment the power domain votes (enable + performance state) are
dropped during system suspend, which means the CPU could potentially
malfunction while entering suspend.
We need to distinguish between two different setups used with
qcom-cpufreq-nvmem:
1. CPR power domain: The backing regulator used by CPR should stay
always-on in Linux; it is typically disabled automatically by
hardware when the CPU enters a deep idle state. However, we
should pause the CPR state machine during system suspend.
2. RPMPD: The power domains used by the CPU should stay always-on
in Linux (also across system suspend). The CPU typically only
uses the *_AO ("active-only") variants of the power domains in
RPMPD. For those, the RPM firmware will automatically drop
the votes internally when the CPU enters a deep idle state.
Make this work correctly by calling device_set_awake_path() on the
virtual genpd devices, so that the votes are maintained across system
suspend. The power domain drivers need to set GENPD_FLAG_ACTIVE_WAKEUP
to opt into staying on during system suspend.
For now we only set this for the RPMPD case. For CPR, not setting it
will ensure the state machine is still paused during system suspend,
while the backing regulator will stay on with "regulator-always-on".
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The genpd core caches performance state votes from devices that are
runtime suspended as of commit 3c5a272202 ("PM: domains: Improve
runtime PM performance state handling"). They get applied once the
device becomes active again.
To attach the power domains needed by qcom-cpufreq-nvmem the OPP core
calls genpd_dev_pm_attach_by_id(). This results in "virtual" dummy
devices that use runtime PM only to control the enable and performance
state for the attached power domain.
However, at the moment nothing ever resumes the virtual devices created
for qcom-cpufreq-nvmem. They remain permanently runtime suspended. This
means that performance state votes made during cpufreq scaling get
always cached and never applied to the hardware.
Fix this by enabling the devices after attaching them.
Without this fix performance states votes are silently ignored, and the
CPU/CPR voltage is never adjusted. This has been broken since 5.14 but
for some reason no one noticed this on QCS404 so far.
Fixes: 1cb8339ca2 ("cpufreq: qcom: Add support for qcs404 on nvmem driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
For a 900MHz i.MX6ULL CPU the 792MHz OPP is disabled. There is no
convincing reason to disable this OPP. If a CPU can run at 900MHz,
it should also be able to cope with 792MHz. Looking at the voltage
level of 792MHz in [1] (page 24, table 10. "Operating Ranges") the
current defined OPP is above the minimum. So the voltage level
shouldn't be a problem. However in [2] (page 24, table 10.
"Operating Ranges"), it is not mentioned that 792MHz OPP isn't
allowed. Change it to only disable 792MHz OPP for i.MX6ULL types
below 792 MHz.
[1] https://www.nxp.com/docs/en/data-sheet/IMX6ULLIEC.pdf
[2] https://www.nxp.com/docs/en/data-sheet/IMX6ULLCEC.pdf
Fixes: 0aa9abd4c2 ("cpufreq: imx6q: check speed grades for i.MX6ULL")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
[ Viresh: Edited subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
sdw_stream_add_master() and sdw_stream_add_slave() do not modify
contents of passed sdw_port_config, so it can be made const for code
safety and as documentation of expected usage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231120174720.239610-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
