We never initialize the two interval tree nodes, and zero fill is not the
same as RB_CLEAR_NODE. This can hide issues where we missed adding the
area to the trees. Factor out the allocation and clear the two nodes.
Fixes: 51fe6141f0 ("iommufd: Data structure to provide IOVA to PFN mapping")
Link: https://lore.kernel.org/r/20231030145035.GG691768@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In iopt_area_split(), if the original iopt_area has filled a domain and is
linked to domains_itree, pages_nodes have to be properly
reinserted. Otherwise the domains_itree becomes corrupted and we will UAF.
Fixes: 51fe6141f0 ("iommufd: Data structure to provide IOVA to PFN mapping")
Link: https://lore.kernel.org/r/20231027162941.2864615-2-den@valinux.co.jp
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pointer to the next STI font is actually a signed 32-bit
offset. With this change the 64-bit kernel will correctly subract
the (signed 32-bit) offset instead of adding a (unsigned 32-bit)
offset. It has no effect on 32-bit kernels.
This fixes the stifb driver with a 64-bit kernel on qemu.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
An excerpt from the PA8800 ERS states:
* The PA8800 violates the seven instruction pipeline rule when performing
TLB inserts or PxTLBE instructions with the PSW C bit on. The instruction
will take effect by the 12th instruction after the insert or purge.
I believe we have a problem with handling TLB misses. We don't fill
the pipeline following TLB inserts. As a result, we likely fault again
after returning from the interruption.
The above statement indicates that we need at least seven instructions
after the insert on pre PA8800 processors and we need 12 instructions
on PA8800/PA8900 processors.
Here we add macros and code to provide the required number instructions
after a TLB insert.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Suggested-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
smp_prepare_boot_cpu() reads the cpuid of the first CPU, printing a
message to state which processor booted, and setting it online and
present.
This cpuid is retrieved from per_cpu(cpu_data, 0).cpuid, which is
initialised in arch/parisc/kernel/processor.c:processor_probe() thusly:
p = &per_cpu(cpu_data, cpuid);
...
p->cpuid = cpuid; /* save CPU id */
Consequently, the cpuid retrieved seems to be guaranteed to also be
zero, meaning that the message printed in this boils down to:
pr_info("SMP: bootstrap CPU ID is 0\n");
Moreover, since kernel/cpu.c::boot_cpu_init() already sets CPU 0 to
be present and online, there is no need to do this again in
smp_prepare_boot_cpu().
Remove this code, and simplify the printk().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Helge Deller <deller@gmx.de>
The PDIR table of the System Bus Adapter (SBA) I/O MMU uses 64-bit
little-endian pointers.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.4+
PDC uses the PDC_MODEL_OS64 and PDC_MODEL_OS32 constants, so use
those constants for the internal WIDE_FIRMWARE/NARROW_FIRMWARE too.
Signed-off-by: Helge Deller <deller@gmx.de>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231009172923.2457844-18-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We need to check for an active device as otherwise we get warnings
for some mcbsp instances for "Runtime PM usage count underflow!".
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231030052340.13415-1-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we are only warning the user if the BIN or RENDER jobs don't
finish before we unregister V3D. We must wait for all jobs to finish
before unregistering. Therefore, warn the user if TFU or CSD jobs
are not done by the time the driver is unregistered.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023105927.101502-1-mcanal@igalia.com
When i915 perf interface is not available dereferencing it will lead to
NULL dereferences.
As returning -ENOTSUPP is pretty clear return when perf interface is not
available.
Fixes: 2fec539112 ("i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027172822.2753059-1-harshit.m.mogalapalli@oracle.com
[tursulin: added stable tag]
(cherry picked from commit 36f27350ff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit a3431650f3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
gen8_ggtt_invalidate() is only needed for limited set of platforms
where GGTT is mapped as WC. This was added as way to fix WC based GGTT in
commit 0f9b91c754 ("drm/i915: flush system agent TLBs on SNB") and
there are no reference in HW docs that forces us to use this on non-WC
backed GGTT.
This can also cause unwanted side-effects on XE_HP platforms where
GFX_FLSH_CNTL_GEN6 is not valid anymore.
v2: Add a func to detect wc ggtt detection (Ville)
v3: Improve commit log and add reference commit (Daniel)
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.2+
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018093815.1349-1-nirmoy.das@intel.com
(cherry picked from commit 81de3e296b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The newly added memset() causes a warning for some reason I could not
figure out:
In file included from arch/x86/include/asm/string.h:3,
from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
195 | #define memset(s, c, count) __builtin_memset(s, c, count)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
584 | memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
| ^~~~~~
In function 'intel_rc6_init':
Change it to an normal initializer and an added memcpy() that does not have
this problem.
Fixes: 4bb9ca7ee0 ("drm/i915/mtl: C6 residency and C state type for MTL SAMedia")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016201012.1022812-1-arnd@kernel.org
(cherry picked from commit 0520b30b21)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When i915 perf interface is not available dereferencing it will lead to
NULL dereferences.
As returning -ENOTSUPP is pretty clear return when perf interface is not
available.
Fixes: 2fec539112 ("i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027172822.2753059-1-harshit.m.mogalapalli@oracle.com
[tursulin: added stable tag]
Currently the VPU firmware prepares for D0i3 every time the VPU
is entering D0i2 Idle state. This is not optimal as we might not
enter D0i3 every time we enter D0i2 Idle and this preparation
is quite costly.
This optimization moves D0i3 preparation to a dedicated
message sent from the host driver only when the driver is about
to enter D0i3 - this reduces power consumption and latency for
certain workloads, for example audio workloads that submit
inference every 10 ms.
The VPU needs non zero time to enter IDLE state after responding to
D0i3 entry message. If the driver does not wait for the VPU to enter
IDLE state it could cause warm boot failures.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-12-stanislaw.gruszka@linux.intel.com
Split ivpu_ipc_send_receive() implementation to have a version
that does not call pm_runtime_resume_and_get(). That implementation
can be invoked when device is up and runtime resume is prohibited
(for example at the end of boot sequence).
The new function will be used for D0i3 entry IPC message addition
in the separate change.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-10-stanislaw.gruszka@linux.intel.com
The firmware needs to know the time spent in D0i3/D3 to
calculate telemetry data. The D0i3/D3 residency time is
calculated by the driver and passed to the firmware
in the boot parameters.
The driver also passes VPU perf counter value captured
right before entering D0i3 - this allows the VPU firmware
to generate monotonic timestamps for the logs.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-9-stanislaw.gruszka@linux.intel.com
The driver needs to capture the D0i3 entry timestamp to
calculate D0i3 residency time.
The D0i3 residency time and the VPU timestamp are passed
to the firmware at D0i3 exit (warm boot).
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-8-stanislaw.gruszka@linux.intel.com
Change meaning of test_mode module parameter from integer value
to bitmask allowing setting different test features with corresponding
bits.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-7-stanislaw.gruszka@linux.intel.com
Add test_mode = 3 that add VPU_JOB_FLAGS_NULL_SUBMISSION_MASK
flag to the job send to the VPU device. Then the VPU will process
the job but won't execute commands (except the command to signal
the fence).
This can be used to estimate job processing overhead in the host
software and VPU firmware.
Unlike the null hardware mode, the null submission mode will
still work even if UMD uses VPU fences to track job completion.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-6-stanislaw.gruszka@linux.intel.com
Setting a non-zero work point resets the IP hence IP_RESET
trigger is redundant.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-5-stanislaw.gruszka@linux.intel.com
Add new debugfs file to set dvfs_mode FW boot parameter and restart
the FW to allow experimenting with DVFS (dynamic voltage & frequency
scaling).
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-4-stanislaw.gruszka@linux.intel.com
Avoid a possible uninitialized use of the crtc_state variable in function
ssd132x_primary_plane_atomic_check() and avoid the following Smatch warn:
drivers/gpu/drm/solomon/ssd130x.c:921 ssd132x_primary_plane_atomic_check()
error: uninitialized symbol 'crtc_state'.
Fixes: fdd591e00a ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/7dd6ca45-8263-44fe-a318-2fd9d761425d@moroto.mountain/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020225338.1686974-1-javierm@redhat.com
(cherry picked from commit 9e4db199e6)
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
This reverts commit 7bebd83217.
The patch series that removed typedefs from the octeon driver was not
actually built properly, and broke the build (it's hard to test-build
this driver for some reason.) Remove them all at this point in time to
make sure the build works properly.
Link: https://lore.kernel.org/r/32e9ad3c-191e-4dd1-b1cc-07f7b93c3f28@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Oliver Crumrine <ozlinux@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a13f7e4582.
The patch series that removed typedefs from the octeon driver was not
actually built properly, and broke the build (it's hard to test-build
this driver for some reason.) Remove them all at this point in time to
make sure the build works properly.
Link: https://lore.kernel.org/r/32e9ad3c-191e-4dd1-b1cc-07f7b93c3f28@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Oliver Crumrine <ozlinux@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 28fae776c6.
The patch series that removed typedefs from the octeon driver was not
actually built properly, and broke the build (it's hard to test-build
this driver for some reason.) Remove them all at this point in time to
make sure the build works properly.
Link: https://lore.kernel.org/r/32e9ad3c-191e-4dd1-b1cc-07f7b93c3f28@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Oliver Crumrine <ozlinux@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 8d26aa9045.
The patch series that removed typedefs from the octeon driver was not
actually built properly, and broke the build (it's hard to test-build
this driver for some reason.) Remove them all at this point in time to
make sure the build works properly.
Link: https://lore.kernel.org/r/32e9ad3c-191e-4dd1-b1cc-07f7b93c3f28@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Oliver Crumrine <ozlinux@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4fffe4733c.
The patch series that removed typedefs from the octeon driver was not
actually built properly, and broke the build (it's hard to test-build
this driver for some reason.) Remove them all at this point in time to
make sure the build works properly.
Link: https://lore.kernel.org/r/32e9ad3c-191e-4dd1-b1cc-07f7b93c3f28@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Oliver Crumrine <ozlinux@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit b33a296d83.
The patch series that removed typedefs from the octeon driver was not
actually built properly, and broke the build (it's hard to test-build
this driver for some reason.) Remove them all at this point in time to
make sure the build works properly.
Link: https://lore.kernel.org/r/32e9ad3c-191e-4dd1-b1cc-07f7b93c3f28@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Oliver Crumrine <ozlinux@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usage count of struct dev_pm_info is an implementation detail that
is only available if CONFIG_PM is enabled, so printing it in a debug message
causes a build failure in configurations without PM:
In file included from include/linux/device.h:15,
from include/linux/pci.h:37,
from drivers/accel/ivpu/ivpu_pm.c:8:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active':
drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count'
254 | atomic_read(&vdev->drm.dev->power.usage_count));
| ^
include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk'
129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg'
75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \
| ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg'
253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n",
| ^~~~~~~~
The print message does not seem essential, so the easiest workaround is
to just remove it.
Fixes: c39dc15191 ("accel/ivpu: Read clock rate only if device is up")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
