Due to compression, the different replicas of a replicated extent don't
necessarily have to take up the same amount of space - so replicated
data sector counts shouldn't be stored divided by the number of
replicas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
gc lock must be held while invalidating buckets - fixes
"1f7a95698e bcachefs: Invalidate buckets when writing to alloc btree"
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also improve error reporting - only return an error from
bch2_journal_flush_seq() if we had an error writing that entry (i.e. not
if there was an error with a newer entry).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for persistent alloc information. Refactoring also lets us
make free_inc much smaller, which means a lot fewer buckets stranded on
freelists.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
journal_buf_switch is called from the foreground when getting a journal
reservation and thus is somewhat latency sensitive;
bch2_bucket_seq_cleanup has to run infrequently but is a bit expensive
when it does run.
Call it from the journal write path instead, and punt the journal write
to worqueue context.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is prep work for using deferred btree updates for inode updates -
the way inodes are done now we're relying on btree locking for ei_inode
and ei_update_lock could probably be removed, but it'll actually be
needed when we switch to deferred updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
ei_update_lock isn't currently needed for write inode (but it will be
needed again when deferred btree updates are used for inode updates)
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
exceptionally crappy "tracing", but it's a start at documenting the
places restarts can be triggered
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that all filesystem operatinos that manipulate the filesystem
heirachy and i_nlink are fully atomic, we can add a feature bit to
indicate i_nlink doesn't need to be checked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- don't try to print warnings to the console when it is no longer
available
- fix theoretical memory leak in SSDT override handling
- make sure that the boot_params global variable is set before the KASLR
code attempts to hash it for 'randomness'
- avoid soft lockups in the memory acceptance code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZTKmyAAKCRAwbglWLn0t
XOvWAQCz+MYqhf3HbmsyuzEV/HWxEw9gf+KGqSN9wmCrOI5nRAEA7pIWUpZ2e6Jt
eW/6DiyPZ+o7xLMX6J01vLROmQt1ogo=
=iVui
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The boot_params pointer fix uses a somewhat ugly extern struct
declaration but this will be cleaned up the next cycle.
- don't try to print warnings to the console when it is no longer
available
- fix theoretical memory leak in SSDT override handling
- make sure that the boot_params global variable is set before the
KASLR code attempts to hash it for 'randomness'
- avoid soft lockups in the memory acceptance code"
* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
x86/boot: efistub: Assign global boot_params variable
efi: fix memory leak in krealloc failure handling
x86/efistub: Don't try to print after ExitBootService()
It can be useful to know with which return value for example the
typec_retimer_set call failed, so include this info in the dev_err
prints.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231017-glink-altmode-ret-v2-1-921aa7cfc381@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'extern' specifiers do nothing for function declarations. Remove them
from the private qcom-scm header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Link: https://lore.kernel.org/r/20231017092732.19983-4-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We reference struct device in the private scm header but we neither
include linux/device.h nor forward declare it. Fix it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Link: https://lore.kernel.org/r/20231017092732.19983-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We're getting more and more qcom specific .c files in drivers/firmware/
and about to get even more. Create a separate directory for Qualcomm
firmware drivers and move existing sources in there.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Link: https://lore.kernel.org/r/20231017092732.19983-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
dma.c doesn't need most of the headers it includes. Also there is
no point in undefining the DEBUG symbol given that it isn't used
anywhere in this small file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Coldfire cores configured with a data cache can't provide coherent
DMA allocations at all.
Instead of returning non-coherent kernel memory in this case,
return NULL and fail the allocation.
The only driver that used to rely on the previous behavior (fec) has
been switched to use non-coherent allocations for this case recently.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Coldfire platforms with data caches can't properly implement
dma_alloc_coherent and currently just return noncoherent memory from
dma_alloc_coherent.
The fec driver than works around this with a flush of all caches in the
receive path. Make this hack a little less bad by using the explicit
dma_alloc_noncoherent API and documenting the hacky cache flushes so
that the DMA API level hack can be removed.
Also replace the check for CONFIG_M532x for said hack with a check
for COLDFIRE && !COLDFIRE_COHERENT_DMA. While m532x is the only such
platform with a fec module, this makes the code more consistent and
easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Coldfire cores configured without a data cache are DMA coherent and
should thus simply use the simple coherent version of dma-direct.
Introduce a new COLDFIRE_COHERENT_DMA Kconfig symbol as a convenient
short hand for such configurations, and a M68K_NONCOHERENT_DMA symbol
for all cases where we need to build non-coherent DMA infrastructure
to simplify the Kconfig and code conditionals.
Not building the non-coherent DMA code slightly reduces the code
size for such configurations.
Numers for m5249evb_defconfig below:
text data bss dec hex filename
2896158 401052 65392 3362602 334f2a vmlinux.before
2895166 400988 65392 3361546 334b0a vmlinux.after
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Log a warning once when dma_alloc_coherent fails because the platform
does not support coherent allocations at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
The logic in dma_direct_alloc when to use the atomic pool vs remapping
grew a bit unreadable. Consolidate it into a single check, and clean
up the set_uncached vs remap logic a bit as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Instead of using arch_dma_alloc if none of the generic coherent
allocators are used, require the architectures to explicitly opt into
providing it. This will used to deal with the case of m68knommu and
coldfire where we can't do any coherent allocations whatsoever, and
also makes it clear that arch_dma_alloc is a last resort.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
CONFIG_DMA_GLOBAL_POOL can't be combined with other DMA coherent
allocators. Add dependencies to Kconfig to document this, and make
kconfig complain about unmet dependencies if someone tries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Flush remaining checkpoint requests at the end of remount, since a new
checkpoint would be triggered while remount and we need to take care of
it before returning from remount, in order to avoid the below race
condition.
- Thread - checkpoint thread
do_remount()
down_write(&sb->s_umount);
f2fs_remount()
f2fs_disable_checkpoint(sbi) -> add checkpoints to the list
block_operations()
down_read_trylock(&sb->s_umount) = 0
up_write(&sb->s_umount);
f2fs_quota_sync()
dquot_writeback_dquots()
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit 62d9f1a694 ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// simulate srtt to 100ms
+0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0 write(4, ..., 10000) = 10000
+0 > P. 1:10001(10000) ack 1
// inject sack
+.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0 > . 1:1001(1000) ack 1
// inject sack reneging
+.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.
Fixes: 62d9f1a694 ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there is no NFIT at startup, it will return 0 immediately in function
acpi_nfit_add() and will not install Notify() handler. If hotplugging
a nvdimm device later, it will not be identified as there is no Notify()
handler.
Install the handler before getting NFI table in function acpi_nfit_add()
to avoid above issue.
Fixes: dcca12ab62 ("ACPI: NFIT: Install Notify() handler directly")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Douglas Anderson says:
====================
r8152: Avoid writing garbage to the adapter's registers
This series is the result of a cooperative debug effort between
Realtek and the ChromeOS team. On ChromeOS, we've noticed that Realtek
Ethernet adapters can sometimes get so wedged that even a reboot of
the host can't get them to enumerate again, assuming that the adapter
was on a powered hub and din't lose power when the host rebooted. This
is sometimes seen in the ChromeOS automated testing lab. The only way
to recover adapters in this state is to manually power cycle them.
I managed to reproduce one instance of this wedging (unknown if this
is truly related to what the test lab sees) by doing this:
1. Start a flood ping from a host to the device.
2. Drop the device into kdb.
3. Wait 90 seconds.
4. Resume from kdb (the "g" command).
5. Wait another 45 seconds.
Upon analysis, Realtek realized this was happening:
1. The Linux driver was getting a "Tx timeout" after resuming from kdb
and then trying to reset itself.
2. As part of the reset, the Linux driver was attempting to do a
read-modify-write of the adapter's registers.
3. The read would fail (due to a timeout) and the driver pretended
that the register contained all 0xFFs. See commit f53a7ad189
("r8152: Set memory to all 0xFFs on failed reg reads")
4. The driver would take this value of all 0xFFs, modify it, and
attempt to write it back to the adapter.
5. By this time the USB channel seemed to recover and thus we'd
successfully write a value that was mostly 0xFFs to the adpater.
6. The adapter didn't like this and would wedge itself.
Another Engineer also managed to reproduce wedging of the Realtek
Ethernet adpater during a reboot test on an AMD Chromebook. In that
case he was sometimes seeing -EPIPE returned from the control
transfers.
This patch series fixes both issues.
Changes in v5:
- ("Run the unload routine if we have errors during probe") new for v5.
- ("Cancel hw_phy_work if we have an error in probe") new for v5.
- ("Release firmware if we have an error in probe") new for v5.
- Removed extra mutex_unlock() left over in v4.
- Fixed minor typos.
- Don't do queue an unbind/bind reset if probe fails; just retry probe.
Changes in v4:
- Took out some unnecessary locks/unlocks of the control mutex.
- Added comment about reading version causing probe fail if 3 fails.
- Added text to commit msg about the potential unbind/bind loop.
Changes in v3:
- Fixed v2 changelog ending up in the commit message.
- farmework -> framework in comments.
Changes in v2:
- ("Check for unplug in rtl_phy_patch_request()") new for v2.
- ("Check for unplug in r8153b_ups_en() / r8153c_ups_en()") new for v2.
- ("Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") new for v2.
- Reset patch no longer based on retry patch, since that was dropped.
- Reset patch should be robust even if failures happen in probe.
- Switched booleans to bits in the "flags" variable.
- Check for -ENODEV instead of "udev->state == USB_STATE_NOTATTACHED"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
