Commit graph

249,378 commits

Author SHA1 Message Date
Dmitry Torokhov
c680eed5cc i2c: do not try to load modules for of-registered devices
Trying to register an I2C device asynchronously (via async_schedule() call)
results in an ugly warning from request_module() warning about potential
deadlock (because request_module tries to wait for async works to
complete). While we could try to switch to request_module_nowait(), other
buses, as well as I2C itself when not using device tree, do not try to load
modules, but rather rely on the standard infrastructure (udev) to execute
module loading, and we should be doing the same.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-26 16:52:51 +01:00
David Box
894acb2f82 i2c: designware: Add Intel Baytrail PMIC I2C bus support
This patch implements an I2C bus sharing mechanism between the host and platform
hardware on select Intel BayTrail SoC platforms using the X-Powers AXP288 PMIC.

On these platforms access to the PMIC must be shared with platform hardware. The
hardware unit assumes full control of the I2C bus and the host must request
access through a special semaphore. Hardware control of the bus also makes it
necessary to disable runtime pm to avoid interfering with hardware transactions.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-26 12:26:25 +01:00
David Box
c0601d285e i2c: designware: Add i2c bus locking support
Adds support for acquiring and releasing a hardware bus lock in the i2c
designware core transfer function. This is needed for i2c bus controllers
that are shared with but not controlled by the kernel.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-26 12:26:16 +01:00
Alexander Sverdlin
72f0271576 of: i2c: Add i2c-mux-idle-disconnect DT property to PCA954x mux driver
Add i2c-mux-idle-disconnect device tree property to PCA954x mux driver. The new
property forces the multiplexer to disconnect child buses in idle state. This is
used, for example, when there are several multiplexers on the same bus and the
devices on the underlying buses might have same I2C addresses.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nsn.com>
[wsa: added a newline]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-23 17:12:56 +01:00
Jisheng Zhang
67105c5a94 i2c: designware: use {readl|writel}_relaxed instead of readl/writel
readl/writel is too expensive especially on Cortex A9 w/ outer L2 cache.
This introduces i2c read/write delays on Marvell BG2/BG2Q SoCs when there
are heavy L2 cache maintenance operations at the same time.

The driver does not perform DMA, so it's safe to use the relaxed version.
From another side, the relaxed io accessor macros are available on all
architectures now, so we can use the relaxed versions instead.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-23 17:09:15 +01:00
Andy Shevchenko
c99d49a964 i2c: designware-pci: no need to provide clk_khz
The clk_khz field makes sense only if SS counters are not provided. Since we
provide them for Haswell and Baytrail explicitly we may omit the clk_khz
parameter.

Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-23 15:38:13 +01:00
Andy Shevchenko
bd1179fd56 i2c: designware-pci: remove Moorestown support
The Moorestown support bits were removed few years ago. This is a follow up to
that changes.

Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-23 15:38:12 +01:00
Philipp Zabel
4e355f5128 i2c: imx: whitespace and checkpatch cleanup
This patch fixes up some whitespace issues and addresses a few
checkpatch warnings.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-22 16:34:39 +01:00
Wolfram Sang
a5eb71b207 i2c: simplify boilerplate code for attribute groups
Declaring attribute groups can be done with macros these days, let's use
them for consistency and readability reasons. Also, put the ATTR macros
directly below the referenced functions while we are here.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-22 15:26:50 +01:00
Philipp Zabel
90ebd0eb06 i2c: imx: remove unused return value assignments
The ret variable is set and never used in the error path of i2c_imx_dma_request.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-14 15:18:51 +01:00
Mika Westerberg
393cc1ceb9 i2c: ACPI: Pick the first address if device has multiple
ACPI specification allows I2C devices with multiple addresses. The current
implementation goes over all addresses and assigns the last one to the
device. This is typically not the primary address of the device.

Instead of doing that we assign the first address to the device and then
let the driver handle rest of the addresses as it wishes.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-14 11:56:06 +01:00
Harini Katakam
8a86c3aee0 i2c: cadence: Check for errata condition involving master receive
Cadence I2C controller has the following bugs:
- completion indication is not given to the driver at the end of
a read/receive transfer with HOLD bit set.
- Invalid read transaction are generated on the bus when HW timeout
condition occurs with HOLD bit set.

As a result of the above, if a set of messages to be transferred with
repeated start includes any message following a read message,
completion is never indicated and timeout occurs.
Hence a check is implemented to return -EOPNOTSUPP for such sequences.

Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: Vishnu Motghare <vishnum@xilinx.com>
[wsa: fixed some whitespaces]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-14 11:36:58 +01:00
Nicholas Mc Guire
cb9eaba4c5 i2c: imx: fix handling of wait_for_completion_timeout result
wait_for_completion_timeout does not return negative values so
"result" handling here should be simplified to cover the actually
possible cases only.

Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-13 16:21:07 +01:00
Doug Anderson
387f0de6c3 i2c: rk3x: Account for repeated start time requirement
On Rockchip I2C the controller drops SDA low slightly too soon to meet
the "repeated start" requirements.

>From my own experimentation over a number of rates:
 - controller appears to drop SDA at .875x (7/8) programmed clk high.
 - controller appears to keep SCL high for 2x programmed clk high.

The first rule isn't enough to meet tSU;STA requirements in
Standard-mode on the system I tested on.  The second rule is probably
enough to meet tHD;STA requirements in nearly all cases (especially
after accounting for the first), but it doesn't hurt to account for it
anyway just in case.

Even though the repeated start requirement only need to be accounted
for during a small part of the transfer, we'll adjust the timings for
the whole transfer to meet it.  I believe that adjusting the timings
in just the right place to switch things up for repeated start would
require several extra interrupts and that doesn't seem terribly worth
it.

With this change and worst case rise/fall times, I see 100kHz i2c
going to ~85kHz.  With slightly optimized rise/fall (800ns / 50ns) I
see i2c going to ~89kHz.  Fast-mode isn't affected much because
tSU;STA is shorter relative to tHD;STA there.

As part of this change we needed to account for the SDA falling time.
The specification indicates that this should be the same, but we'll
follow Designware's lead and add a binding.  Note that we deviate from
Designware and assign the default SDA falling time to be the same as
the SCL falling time, which is incredibly likely.

Signed-off-by: Doug Anderson <dianders@chromium.org>
[wsa: rebased to i2c/for-next]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-13 16:21:05 +01:00
addy ke
1330e29105 i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C specification
The number of clock cycles to be written into the CLKDIV register
that determines the I2C clk high phase includes the rise time.
So to meet the timing requirements defined in the I2C specification
which defines the minimal time SCL has to be high, the rise time
has to taken into account. The same applies to the low phase with
falling time.

In my test on RK3288-Pink2 board, which is not an upstream board yet,
if external pull-up resistor is 4.7K, rise_ns is about 700ns.
So the measured high_ns is about 3900ns, which is less than 4000ns
(the minimum high_ns in I2C specification for Standard-mode).

To fix this bug min_low_ns should include fall time and min_high_ns
should include rise time.

This patch merged the patch from chromium project which can get the
rise and fall times for signals from the device tree. This allows us
to more accurately calculate timings. see:
https://chromium-review.googlesource.com/#/c/232774/

Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
[wsa: fixed a typo in the docs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-13 16:21:04 +01:00
Harini Katakam
9fae82e1ac i2c: cadence: Handle > 252 byte transfers
The I2C controller sends a NACK to the slave when transfer size register
reaches zero, irrespective of the hold bit. So, in order to handle transfers
greater than 252 bytes, the transfer size register has to be maintained at a
value >= 1. This patch implements the same.
The interrupt status is cleared at the beginning of the isr instead of
the end, to avoid missing any interrupts.

Signed-off-by: Harini Katakam <harinik@xilinx.com>
[wsa: added braces around else branch]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-13 16:21:03 +01:00
Wolfram Sang
1c57499361 i2c: pmcmsp: remove dead code
CPPCHECK rightfully says:

drivers/i2c/busses/i2c-pmcmsp.c:151: style: The function 'pmcmsptwi_reg_to_clock' is never used.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-13 10:37:43 +01:00
Lars-Peter Clausen
523c5b8964 i2c: Remove support for legacy PM
There haven't been any I2C driver that use the legacy suspend/resume
callbacks for a while now and new drivers are supposed to use PM ops. So
remove support for legacy suspend/resume for I2C drivers.

Since there aren't any special bus specific things to do during
suspend/resume and since the PM core will automatically fallback directly to
using the device's PM ops if no bus PM ops are specified there is no need to
have any I2C bus PM ops.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-12-22 20:09:08 +01:00
Linus Torvalds
bfc7249cc2 Please consider pulling the clk framework changes toward 3.19. It is
much later than usual due to several last minute bugs that had to be
 addressed. As usual the majority of changes are new drivers and
 modifications to existing drivers. The core recieved many fixes along
 with the groundwork for several large changes coming in the future which
 will better parition clock providers from clock consumers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUlMRQAAoJEDqPOy9afJhJgdUQAK4myJT0q10LSqe9piwzGVXg
 uDcIN5CTtbdYkvdGIfCjeqz3t+DClnAMPx2ZPIjC0Z1mIvqq+ViqwP5U8kKd7z1a
 WCKV8e5Et3O1WNbslzsx5Z2JYJNgzqr1xxWAOLTLh5rYxVwE5b946Yv4Whxa694I
 ugm4wNlibeN3H8pnyH8YEiWEtahtu7B5v/9WELpyREwNxw7ZA18MttEvWaamAPHG
 rAxhQCB3A3HaIvyg8KFdVmwOBZQMc2EWT00kJfdRWL4/iGAipKCnbuh1c8Pr/RQE
 XRg5Y+MuMLotoUELYYeZHtEmIlW3A+9gR6tLivswPpOP8/5BVUyA5Hh0yCGUqUHD
 s5Iheq7s7xnKEgIu9cD4tf1nCY41gw+4/I4pm47WLkaRgehcEBcAibVC3CupZ5pI
 hJiFqEKWPKEk8vAJ/mM+wCGI4w01+eoICBm4EG06Nwj4xkQcAVqE67ZvgVs1LrmL
 efqSxkWpNoetf0Q12cfePHmWtesGNdvljLdXQ54T4qH9HxNaI9/9eM6tyFTfrDSe
 BG5h7gbPr6/aM/1FfcWn5jQIfjEjPhQtSpCehs8pMf/pG5QZgftBtwe3p+yz7zXJ
 Q/v8xNEcZ7Ze6/9rJsAcbLzyzcdk9NzTlEMplzGBoUQFNiEXKoIjCDKAx39UFtMz
 EccWXvt9iNZZhmDcu0pU
 =jD84
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux

Pull clk framework updates from Mike Turquette:
 "This is much later than usual due to several last minute bugs that had
  to be addressed.  As usual the majority of changes are new drivers and
  modifications to existing drivers.  The core recieved many fixes along
  with the groundwork for several large changes coming in the future
  which will better parition clock providers from clock consumers"

* tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
  clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated
  ARM: OMAP3: clock: fix boot breakage in legacy mode
  ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs
  clk: Really fix deadlock with mmap_sem
  clk: mmp: fix sparse non static symbol warning
  clk: Change clk_ops->determine_rate to return a clk_hw as the best parent
  clk: change clk_debugfs_add_file to take a struct clk_hw
  clk: Don't expose __clk_get_accuracy
  clk: Don't try to use a struct clk* after it could have been freed
  clk: Remove unused function __clk_get_prepare_count
  clk: samsung: Fix double add of syscore ops after driver rebind
  clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmi
  clk: samsung: exynos4415: Fix build with PM_SLEEP disabled
  clk: samsung: remove unnecessary inclusion of header files from clk.h
  clk: samsung: remove unnecessary CONFIG_OF from clk.c
  clk: samsung: Spelling s/bwtween/between/
  clk: rockchip: Add support for the mmc clock phases using the framework
  clk: rockchip: add bindings for the mmc clocks
  clk: rockchip: rk3288 export i2s0_clkout for use in DT
  clk: rockchip: use clock ID for DMC (memory controller) on rk3288
  ...
2014-12-20 16:42:36 -08:00
Linus Torvalds
a4e1328a9d Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
 "Included are two bugfixes needing some bigger refactoring (sh_mobile:
  deferred probe with DMA, mv64xxx: fix offload support) and one
  deprecated driver removal I thought would go in via ppc but I
  misunderstood.  It has a proper ack from BenH"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sh_mobile: fix uninitialized var when debug is enabled
  macintosh: therm_pm72: delete deprecated driver
  i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  i2c: sh_mobile: rework deferred probing
  i2c: sh_mobile: refactor DMA setup
  i2c: mv64xxx: rework offload support to fix several problems
  i2c: mv64xxx: use BIT() macro for register value definitions
2014-12-20 13:52:52 -08:00
Linus Torvalds
cdce6ac277 SCSI for-linus on 20141220
This is a much shorter set of patches that were on the go but didn't make it
 in to the early pull request for the merge window.  It's really a set of bug
 fixes plus some final cleanup work on the new tag queue API.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJUlaYEAAoJEDeqqVYsXL0MmXAH/2UUcE11p0KBHMR4cAn76xrG
 9093ZT9VZ4LH/Z7PbgwIWC4YHDqVpwA1+Trj1mh8PxiZz2SopWe27O2lQMRS5VUc
 MN28kbmK3L0jQj+OUez10Da6k0hU/KL8TlWT765MxFDKCaAuPZ4u541tyZEIGmLL
 olOQrn/fSlu+18QqqZ+D2rMaK7kGH6ZgbOadnRfYGkLjU4YeAMEC9L7UgnDxHiaN
 gZozoARkGeAnDJERVETRTtAiOXGRH8sGCpue0yYlhZXpAQ9cFUkS/hMqDWnaVC2S
 0x0w34RvbxSqO0gPT0K5XLoMiFyg04vnZ2xBVFBsANQTSEjQJO8USNAa4r74hf8=
 =D3eN
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI update from James Bottomley:
 "This is a much shorter set of patches that were on the go but didn't
  make it in to the early pull request for the merge window.  It's
  really a set of bug fixes plus some final cleanup work on the new tag
  queue API"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  storvsc: ring buffer failures may result in I/O freeze
  ipr: set scsi_level correctly for disk arrays
  ipr: add support for async scanning to speed up boot
  scsi_debug: fix missing "break;" in SDEBUG_UA_CAPACITY_CHANGED case
  scsi_debug: take sdebug_host_list_lock when changing capacity
  scsi_debug: improve driver description in Kconfig
  scsi_debug: fix compare and write errors
  qla2xxx: fix race in handling rport deletion during recovery causes panic
  scsi: blacklist RSOC for Microsoft iSCSI target devices
  scsi: fix random memory corruption with scsi-mq + T10 PI
  Revert "[SCSI] mpt3sas: Remove phys on topology change"
  Revert "[SCSI] mpt2sas: Remove phys on topology change."
  esas2r: Correct typos of "validate" in a comment
  fc: FCP_PTA_SIMPLE is 0
  ibmvfc: remove unused tag variable
  scsi: remove MSG_*_TAG defines
  scsi: remove scsi_set_tag_type
  scsi: remove scsi_get_tag_type
  scsi: never drop to untagged mode during queue ramp down
  scsi: remove ->change_queue_type method
2014-12-20 13:42:57 -08:00
Linus Torvalds
5d6a546886 CONFIG_PM_RUNTIME elimination for 3.19-rc1
This removes the last few uses of CONFIG_PM_RUNTIME introduced
 recently and makes that config option finally go away.
 
 CONFIG_PM will be available directly from the menu now and
 also it will be selected automatically if CONFIG_SUSPEND or
 CONFIG_HIBERNATION is set.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUlYaPAAoJEILEb/54YlRx/SoP/2wYioGzBhOCYfHw6fZF8zrP
 rotQ86sakhvSHre8K9QyFjvsA9wJ0CaTJF46YKZuHFhqU+IJZ7aXvNdEM1hK214J
 Mf3L2AcbcdnXioAN+HpeZhQklp2qHe84YkVXBqsFD6kb/qUNV2LSjy6nKEUdY3jW
 6KL2f3RgF/LDjTdedujJgcCYwMBwfX4B7U42BG4NQQ8z3wCV+imJgzNDrR5nNlqK
 xu8ab8hO1Gi3msOJxS0y4MN6VTUpYOvQKhSyM9ErcB2ibclAdmcivKuFAz6gy5U7
 PyDfYo/P3mXjMRBFb9fLqGtRcfstsnxPPSeKwp236tIQFX19Bj76UVUMJoUlXJP5
 /f55/P7mCascg74ZZC4GiD/BSCRdqwInCsFMzqAfSq2NciKzeS6W7Mhd9VTLKDpl
 5kqE39imUjZyps7/QqkfWskzB7Puhmqk3ZgTq2yAd4uQTpV7xlJYcnvr4oHCmAia
 SsLdYOqMQzWr3qyz2f5cOqPAvOo3/Xk/HHfTOCHW/4L+Ov+C921/f3d5GnxX9Ha+
 ucRaMp9j5FPYVwFaFkczAMNF2Eanq+Fupa3e6XUNNbYdchFqT9obnHZbVKyvswjR
 vdGAYAjP/cLzIH9ETDCCXCRvBRw5pzeelDgvDPjPdmPjndHXG8WViyTIEyLL4+1i
 BENtc/SUw3pZ7iNlGO78
 =QnSO
 -----END PGP SIGNATURE-----

Merge tag 'pm-config-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull CONFIG_PM_RUNTIME elimination from Rafael Wysocki:
 "This removes the last few uses of CONFIG_PM_RUNTIME introduced
  recently and makes that config option finally go away.

  CONFIG_PM will be available directly from the menu now and also it
  will be selected automatically if CONFIG_SUSPEND or CONFIG_HIBERNATION
  is set"

* tag 'pm-config-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: Eliminate CONFIG_PM_RUNTIME
  tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-20 13:37:44 -08:00
Wolfram Sang
fe07adec73 i2c: sh_mobile: fix uninitialized var when debug is enabled
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-12-20 09:28:09 +01:00
Linus Torvalds
ecb5ec044a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile #3 from Al Viro:
 "Assorted fixes and patches from the last cycle"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  [regression] chunk lost from bd9b51
  vfs: make mounts and mountstats honor root dir like mountinfo does
  vfs: cleanup show_mountinfo
  init: fix read-write root mount
  unfuck binfmt_misc.c (broken by commit e6084d4)
  vm_area_operations: kill ->migrate()
  new helper: iter_is_iovec()
  move_extent_per_page(): get rid of unused w_flags
  lustre: get rid of playing with ->fs
  btrfs: filp_open() returns ERR_PTR() on failure, not NULL...
2014-12-19 18:19:19 -08:00
Linus Torvalds
ed55635e2e Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
 "The highlights this merge window include:

   - Allow target fabric drivers to function as built-in.  (Roland)
   - Fix tcm_loop multi-TPG endpoint nexus bug.  (Hannes)
   - Move per device config_item_type into se_subsystem_api, allowing
     configfs attributes to be defined at module_init time.  (Jerome +
     nab)
   - Convert existing IBLOCK/FILEIO/RAMDISK/PSCSI/TCMU drivers to use
     external configfs attributes.  (nab)
   - A number of iser-target fixes related to active session + network
     portal shutdown stability during extended stress testing.  (Sagi +
     Slava)
   - Dynamic allocation of T10-PI contexts for iser-target, fixing a
     potentially bogus iscsi_np->tpg_np pointer reference in >= v3.14
     code.  (Sagi)
   - iser-target performance + scalability improvements.  (Sagi)
   - Fixes for SPC-4 Persistent Reservation AllRegistrants spec
     compliance.  (Ilias + James + nab)
   - Avoid potential short kern_sendmsg() in iscsi-target for now until
     Al's conversion to use msghdr iteration is merged post -rc1.
     (Viro)

  Also, Sagi has requested a number of iser-target patches (9) that
  address stability issues he's encountered during extended stress
  testing be considered for v3.10.y + v3.14.y code.  Given the amount of
  LOC involved, it will certainly require extra backporting effort.

  Apologies in advance to Greg-KH & Co on this.  Sagi and I will be
  working post-merge to ensure they each get applied correctly"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (53 commits)
  target: Allow AllRegistrants to re-RESERVE existing reservation
  uapi/linux/target_core_user.h: fix headers_install.sh badness
  iscsi-target: Fail connection on short sendmsg writes
  iscsi-target: nullify session in failed login sequence
  target: Avoid dropping AllRegistrants reservation during unregister
  target: Fix R_HOLDER bit usage for AllRegistrants
  iscsi-target: Drop left-over bogus iscsi_np->tpg_np
  iser-target: Fix wc->wr_id cast warning
  iser-target: Remove code duplication
  iser-target: Adjust log levels and prettify some prints
  iser-target: Use debug_level parameter to control logging level
  iser-target: Fix logout sequence
  iser-target: Don't wait for session commands from completion context
  iser-target: Reduce CQ lock contention by batch polling
  iser-target: Introduce isert_poll_budget
  iser-target: Remove an atomic operation from the IO path
  iser-target: Remove redundant call to isert_conn_terminate
  iser-target: Use single CQ for TX and RX
  iser-target: Centralize completion elements to a context
  iser-target: Cast wr_id with uintptr_t instead of unsinged long
  ...
2014-12-19 18:02:22 -08:00
Linus Torvalds
e589c9e13a Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
 "After stopping the full x86/apic branch, I took some time to go
  through the first block of patches again, which are mostly cleanups
  and preparatory work for the irqdomain conversion and ioapic hotplug
  support.

  Unfortunaly one of the real problematic commits was right at the
  beginning, so I rebased this portion of the pending patches without
  the offenders.

  It would be great to get this into 3.19.  That makes reworking the
  problematic parts simpler.  The usual tip testing did not unearth any
  issues and it is fully bisectible now.

  I'm pretty confident that this wont affect the calmness of the xmas
  season.

  Changes:
   - Split the convoluted io_apic.c code into domain specific parts
     (vector, ioapic, msi, htirq)
   - Introduce proper helper functions to retrieve irq specific data
     instead of open coded dereferencing of pointers
   - Preparatory work for ioapic hotplug and irqdomain conversion
   - Removal of the non functional pci-ioapic driver
   - Removal of unused irq entry stubs
   - Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC
     allocations for everything which is called from there.
   - Small cleanups and fixes"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ
  iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ
  x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ
  x86, irq: Use helpers to access irq_cfg data structure associated with IRQ
  x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC
  x86, irq: Move IRQ initialization routines from io_apic.c into vector.c
  x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h
  x86, irq: Move HT IRQ related code from io_apic.c into htirq.c
  x86, irq: Move PCI MSI related code from io_apic.c into msi.c
  x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities
  x86, irq: Make UP version of irq_complete_move() an inline stub
  x86, irq: Move local APIC related code from io_apic.c into vector.c
  x86, irq: Introduce helpers to access struct irq_cfg
  x86, irq: Protect __clear_irq_vector() with vector_lock
  x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx()
  x86, irq: Refine hw_irq.h to prepare for irqdomain support
  x86, irq: Convert irq_2_pin list to generic list
  x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector()
  x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI
  x86, irq: Introduce helper to check whether an IOAPIC has been registered
  ...
2014-12-19 14:02:02 -08:00
Rafael J. Wysocki
464ed18ebd PM: Eliminate CONFIG_PM_RUNTIME
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
2014-12-19 22:55:06 +01:00
Linus Torvalds
4bb9374e0b Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NOHZ update from Thomas Gleixner:
 "Remove the call into the nohz idle code from the fake 'idle' thread in
  the powerclamp driver along with the export of those functions which
  was smuggeled in via the thermal tree.  People have tried to hack
  around it in the nohz core code, but it just violates all rightful
  assumptions of that code about the only valid calling context (i.e.
  the proper idle task).

  The powerclamp trainwreck will still work, it just wont get the
  benefit of long idle sleeps"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/powerclamp: Remove tick_nohz_idle abuse
2014-12-19 13:29:20 -08:00
Linus Torvalds
34b85e3574 powerpc updates for 3.19 batch 2
The highlight is the series that reworks the idle management on powernv, which
 allows us to use deeper idle states on those machines.
 
 There's the fix from Anton for the "BUG at kernel/smpboot.c:134!" problem.
 
 An i2c driver for powernv. This is acked by Wolfram Sang, and he asked that we
 take it through the powerpc tree.
 
 A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of the audit
 maintainers.
 
 A patch from Ben to export the symbol map of our OPAL firmware as a sysfs file,
 so that tools can use it.
 
 Also some CXL fixes, a couple of powerpc perf fixes, a fix for smt-enabled, and
 the patch to add __force to get_user() so we can use bitwise types.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUk+oCAAoJEFHr6jzI4aWADBAP/i/CJ+cu6o4mzNDdfs8bnxqn
 RGZCSV+SrkTZPcoLbLiM9iaqq34ORVIn7hwkhkTz2/koluMVfTsqtVulMoFf+hVd
 GTVt81MjMFzA3hM3bXEV58KRT79+64K54dLCe0F7OaD6f4AikKR4LLz/PY0EBMiZ
 2h13uQlfglaMeYTsaD9eeUpIIKs7+PwsNqUknmN9We07WWfxWqnRpiTR4TYTMXx4
 3lQPvCnnHokwDqjuKgwiqDVSaCfCl8laS1i+BPk0G0aRV1AnPDvR3MhgVb2IpNxX
 Joxy2D1HSawwDhqHOsId8dkGZXOM4vzo+Y658qnC1XfThqE0MhA+kCfa5/b6xlOR
 K7nDO5A41B6nXB3mMOQh/szTXSIa8KJRTR3ibbJJrMdF6F0TN0JLLQNUcmM4j/5D
 vvgZEzvFNZhWX98ktlQLde2E4ClWJg6mWESCGSgJeVjIXaxe/6GneIa8vLKm5QMu
 OoykNsASMDGqddYMGoYeX/mSsvjPjK0PDO2q19sPbkP8xpyDLx6J8xo+5hO4l8xc
 0Cdb38ECfeno+w5oKAnjidHnz0KYBsuYFLeS+rV0b8sUSWAzfdEjSn2AVIQ8gLOv
 IOCAqwZ5tL9EcUs+AKru5EHtBEV+2XB54xPRxfdFS/k+vYRE7MpS3ipxveIynN2l
 eRxf9hsSO7ASNDd0b3ID
 =GXdK
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull second batch of powerpc updates from Michael Ellerman:
 "The highlight is the series that reworks the idle management on
  powernv, which allows us to use deeper idle states on those machines.

  There's the fix from Anton for the "BUG at kernel/smpboot.c:134!"
  problem.

  An i2c driver for powernv.  This is acked by Wolfram Sang, and he
  asked that we take it through the powerpc tree.

  A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of
  the audit maintainers.

  A patch from Ben to export the symbol map of our OPAL firmware as a
  sysfs file, so that tools can use it.

  Also some CXL fixes, a couple of powerpc perf fixes, a fix for
  smt-enabled, and the patch to add __force to get_user() so we can use
  bitwise types"

* tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  powerpc/powernv: Ignore smt-enabled on Power8 and later
  powerpc/uaccess: Allow get_user() with bitwise types
  powerpc/powernv: Expose OPAL firmware symbol map
  powernv/powerpc: Add winkle support for offline cpus
  powernv/cpuidle: Redesign idle states management
  powerpc/powernv: Enable Offline CPUs to enter deep idle states
  powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode
  i2c: Driver to expose PowerNV platform i2c busses
  powerpc: add little endian flag to syscall_get_arch()
  power/perf/hv-24x7: Use kmem_cache_free() instead of kfree
  powerpc/perf/hv-24x7: Use per-cpu page buffer
  cxl: Unmap MMIO regions when detaching a context
  cxl: Add timeout to process element commands
  cxl: Change contexts_lock to a mutex to fix sleep while atomic bug
  powerpc: Secondary CPUs must set cpu_callin_map after setting active and online
2014-12-19 12:57:45 -08:00
Dave Jones
d5e80b4b18 Update/Remove soon-to-be-dead email address
I'm leaving Red Hat at the end of December 2014, so remove all
references to my soon-to-be-dead address.

(There are some references left in the tree, that need additional
changes, I'll send those through the AGP maintainers).

Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-19 12:56:15 -08:00
Wolfram Sang
b074cf80a7 macintosh: therm_pm72: delete deprecated driver
The new driver is around for more than 2 years now, so the old one can
go. Getting rid of it helps the removal of the legacy .attach_adapter
callback of the I2C subsystem.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-12-19 19:32:47 +01:00
Rafael J. Wysocki
71504e519d tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM
The 8250_omap serial driver is a new user of CONFIG_PM_RUNTIME.

However, after commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so
#ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to
depend on CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in 8250_omap.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-19 15:27:58 +01:00
Rafael J. Wysocki
47164fdb3b spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
A couple of new CONFIG_PM_RUNTIME users have been added recently
in the SPI subsystem.

However, after commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so
#ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to
depend on CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/spi/ (again).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
2014-12-19 15:25:31 +01:00
Thomas Gleixner
a5fd9733a3 tick/powerclamp: Remove tick_nohz_idle abuse
commit 4dbd27711c "tick: export nohz tick idle symbols for module
use" was merged via the thermal tree without an explicit ack from the
relevant maintainers.

The exports are abused by the intel powerclamp driver which implements
a fake idle state from a sched FIFO task. This causes all kinds of
wreckage in the NOHZ core code which rightfully assumes that
tick_nohz_idle_enter/exit() are only called from the idle task itself.

Recent changes in the NOHZ core lead to a failure of the powerclamp
driver and now people try to hack completely broken and backwards
workarounds into the NOHZ core code. This is completely unacceptable
and just papers over the real problem. There are way more subtle
issues lurking around the corner.

The real solution is to fix the powerclamp driver by rewriting it with
a sane concept, but that's beyond the scope of this.

So the only solution for now is to remove the calls into the core NOHZ
code from the powerclamp trainwreck along with the exports. 

Fixes: d6d71ee4a1 "PM: Introduce Intel PowerClamp Driver"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Pan Jacob jun <jacob.jun.pan@intel.com>
Cc: LKP <lkp@01.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412181110110.17382@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-12-19 14:05:52 +01:00
Linus Torvalds
64ec45bff6 vhost/virtio: virtio 1.0 related fixes
Most importantly, this fixes using virtio_pci as a module.
 
 Further, the big virtio 1.0 conversion missed a couple of places. This fixes
 them up.
 
 This isn't 100% sparse-clean yet because on many architectures get_user
 triggers sparse warnings when used with __bitwise tag (when same tag is on both
 pointer and value read).
 
 I posted a patchset to fix it up by adding __force on all
 arches that don't already have it (many do), when that's
 merged these warnings will go away.
 
 Cc: Rusty Russell <rusty@rustcorp.com.au>
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUkSztAAoJECgfDbjSjVRp5DkH/ibw+0ZaEFP/SXWnw6WONpaG
 pzMsrfMG/vxlOfutSUdDqG+oqqU2fSLvFq5qDK6Xk9/emRSwGduz29ZaxGh8J1MZ
 /Ojqtu/HSLl+UASTs+fMw49itghoIjmAPBwwMkQjvanfqLclgdz9UxzoCOc4YkO0
 PJQA/Vw6blVSP1m0p97PvzZkAiIetI2ixZn2vPJZc8vSkOHtygM9HdXKTv785HbG
 ycRbR9B3OBMvq26FIuWeyuY93FnyX2Qtf2bzwSSRdzo7qlsNhVVG7sKyWOOR+1xG
 TLmjhyTF57oA2GgZCVfgnFxsfiuIKMumfG0jbABTXmBGgA/ULef7HcF/lzLgdq8=
 =32cU
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio fixes from Michael S Tsirkin:
 "virtio 1.0 related fixes

  Most importantly, this fixes using virtio_pci as a module.

  Further, the big virtio 1.0 conversion missed a couple of places.
  This fixes them up.

  This isn't 100% sparse-clean yet because on many architectures
  get_user triggers sparse warnings when used with __bitwise tag (when
  same tag is on both pointer and value read).

  I posted a patchset to fix it up by adding __force on all arches that
  don't already have it (many do), when that's merged these warnings
  will go away"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci: restore module attributes
  mic/host: fix up virtio 1.0 APIs
  vringh: update for virtio 1.0 APIs
  vringh: 64 bit features
  tools/virtio: add virtio 1.0 in vringh_test
  tools/virtio: add virtio 1.0 in virtio_test
  tools/virtio: enable -Werror
  tools/virtio: 64 bit features
  tools/virtio: fix vringh test
  tools/virtio: more stubs
  virtio: core support for config generation
  virtio_pci: add VIRTIO_PCI_NO_LEGACY
  virtio_pci: move probe to common file
  virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY
  virtio_config: fix virtio_cread_bytes
  virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore
2014-12-18 20:50:30 -08:00
Linus Torvalds
c0f486fde3 More ACPI and power management updates for 3.19-rc1
- Fix a regression in leds-gpio introduced by a recent commit that
    inadvertently changed the name of one of the properties used by
    the driver (Fabio Estevam).
 
  - Fix a regression in the ACPI backlight driver introduced by a
    recent fix that missed one special case that had to be taken
    into account (Aaron Lu).
 
  - Drop the level of some new kernel messages from the ACPI core
    introduced by a recent commit to KERN_DEBUG which they should
    have used from the start and drop some other unuseful KERN_ERR
    messages printed by ACPI (Rafael J Wysocki).
 
  - Revert an incorrect commit modifying the cpupower tool
    (Prarit Bhargava).
 
  - Fix two regressions introduced by recent commits in the OPP
    library and clean up some existing minor issues in that code
    (Viresh Kumar).
 
  - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout
    the tree (or drop it where that can be done) in order to make
    it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki,
    Ulf Hansson, Ludovic Desroches).  There will be one more
    "CONFIG_PM_RUNTIME removal" batch after this one, because some
    new uses of it have been introduced during the current merge
    window, but that should be sufficient to finally get rid of it.
 
  - Make the ACPI EC driver more robust against race conditions
    related to GPE handler installation failures (Lv Zheng).
 
  - Prevent the ACPI device PM core code from attempting to
    disable GPEs that it has not enabled which confuses ACPICA
    and makes it report errors unnecessarily (Rafael J Wysocki).
 
  - Add a "force" command line switch to the intel_pstate driver
    to make it possible to override the blacklisting of some
    systems in that driver if needed (Ethan Zhao).
 
  - Improve intel_pstate code documentation and add a MAINTAINERS
    entry for it (Kristen Carlson Accardi).
 
  - Make the ACPI fan driver create cooling device interfaces
    witn names that reflect the IDs of the ACPI device objects
    they are associated with, except for "generic" ACPI fans
    (PNP ID "PNP0C0B").  That's necessary for user space thermal
    management tools to be able to connect the fans with the
    parts of the system they are supposed to be cooling properly.
    From Srinivas Pandruvada.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUk0IDAAoJEILEb/54YlRx7fgP/3+yF/0TnEW93j2ALDAQFiLF
 tSv2A2vQC8vtMJjjWx0z/HqPh86gfaReEFZmUJD/Q/e2LXEnxNZJ+QMjcekPVkDM
 mTvcIMc2MR8vOA/oMkgxeaKregrrx7RkCfojd+NWZhVukkjl+mvBHgAnYjXRL+NZ
 unDWGlbHG97vq/3kGjPYhDS00nxHblw8NHFBu5HL5RxwABdWoeZJITwqxXWyuPLw
 nlqNWlOxmwvtSbw2VMKz0uof1nFHyQLykYsMG0ZsyayCRdWUZYkEqmE7GGpCLkLu
 D6yfmlpen6ccIOsEAae0eXBt50IFY9Tihk5lovx1mZmci2SNRg29BqMI105wIn0u
 8b8Ej7MNHp7yMxRpB5WfU90p/y7ioJns9guFZxY0CKaRnrI2+BLt3RscMi3MPI06
 Cu2/WkSSa09fhDPA+pk+VDYsmWgyVawigesNmMP5/cvYO/yYywVRjOuO1k77qQGp
 4dSpFYEHfpxinejZnVZOk2V9MkvSLoSMux6wPV0xM0IE1iD0ulVpHjTJrwp80ph4
 +bfUFVr/vrD1y7EKbf1PD363ZKvJhWhvQWDgETsM1vgLf21PfWO7C2kflIAsWsdQ
 1ukD5nCBRlP4K73hG7bdM6kRztXhUdR0SHg85/t0KB/ExiVqtcXIzB60D0G1lENd
 QlKbq3O4lim1WGuhazQY
 =5fo2
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are regression fixes (leds-gpio, ACPI backlight driver,
  operating performance points library, ACPI device enumeration
  messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device
  PM), some cleanups in the operating performance points (OPP)
  framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of
  minor intel_pstate driver changes, a new MAINTAINERS entry for it and
  an ACPI fan driver change needed for better support of thermal
  management in user space.

  Specifics:

   - Fix a regression in leds-gpio introduced by a recent commit that
     inadvertently changed the name of one of the properties used by the
     driver (Fabio Estevam).

   - Fix a regression in the ACPI backlight driver introduced by a
     recent fix that missed one special case that had to be taken into
     account (Aaron Lu).

   - Drop the level of some new kernel messages from the ACPI core
     introduced by a recent commit to KERN_DEBUG which they should have
     used from the start and drop some other unuseful KERN_ERR messages
     printed by ACPI (Rafael J Wysocki).

   - Revert an incorrect commit modifying the cpupower tool (Prarit
     Bhargava).

   - Fix two regressions introduced by recent commits in the OPP library
     and clean up some existing minor issues in that code (Viresh
     Kumar).

   - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the
     tree (or drop it where that can be done) in order to make it
     possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf
     Hansson, Ludovic Desroches).

     There will be one more "CONFIG_PM_RUNTIME removal" batch after this
     one, because some new uses of it have been introduced during the
     current merge window, but that should be sufficient to finally get
     rid of it.

   - Make the ACPI EC driver more robust against race conditions related
     to GPE handler installation failures (Lv Zheng).

   - Prevent the ACPI device PM core code from attempting to disable
     GPEs that it has not enabled which confuses ACPICA and makes it
     report errors unnecessarily (Rafael J Wysocki).

   - Add a "force" command line switch to the intel_pstate driver to
     make it possible to override the blacklisting of some systems in
     that driver if needed (Ethan Zhao).

   - Improve intel_pstate code documentation and add a MAINTAINERS entry
     for it (Kristen Carlson Accardi).

   - Make the ACPI fan driver create cooling device interfaces witn
     names that reflect the IDs of the ACPI device objects they are
     associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B").

     That's necessary for user space thermal management tools to be able
     to connect the fans with the parts of the system they are supposed
     to be cooling properly.  From Srinivas Pandruvada"

* tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  MAINTAINERS: add entry for intel_pstate
  ACPI / video: update the skip case for acpi_video_device_in_dod()
  power / PM: Eliminate CONFIG_PM_RUNTIME
  NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  ACPI / EC: Fix unexpected ec_remove_handlers() invocations
  Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
  tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c
  PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
  mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro
  PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
  ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  ACPI / PM: Do not disable wakeup GPEs that have not been enabled
  ACPI / utils: Drop error messages from acpi_evaluate_reference()
  ...
2014-12-18 20:28:33 -08:00
Linus Torvalds
385336e321 platform-drivers-x86 for 3.19
thinkpad-acpi: Switch to software mute, cleanups
 acerhdf: Bang-bang thermal governor, new models, cleanups
 dell-laptop: New keyboard backlight support and documentation
 toshiba_acpi: Keyboard backlight updates, hotkey handling
 dell-wmi: Keypress filtering, WMI event processing
 eeepc-laptop: Multiple cleanups, improved error handling, documentation
 hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
 misc: Code cleanups, quirks, various new IDs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUkw1OAAoJEKbMaAwKp364N0AH/A/1YQDjiIsrRe7/J65rfna+
 zrH6QoQfEaTbkJX3p8VFElh0Tlx9EO7kYfxhHm45kjWjfuJsyZtEonl+CeZTEe2s
 SGP1v3wSUbHc8MI1sRqqDUSTNihJPWEPjc8jFKqyJ3iOO0r6F/UuYajPwEGpjAjh
 etHY9HBS8FNwaevh6T3tiKeyy+z34OZHsASCnZEYLKWYXRu/0dL3yNY1vIs3Ybux
 bnH+sbBUXSu3rir4V6q/4j6f1B6RnXqirPLq5rsNHhHETGCJUy+phUWZRYMEVzR3
 A3rEuHXcHMgqlVLqa+ph3nN3iyNYXVVkOfENUCp/2WDdagBqpD5isc6YmPCzsJk=
 =1/XE
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver update from Darren Hart:
 - thinkpad-acpi: Switch to software mute, cleanups
 - acerhdf: Bang-bang thermal governor, new models, cleanups
 - dell-laptop: New keyboard backlight support and documentation
 - toshiba_acpi: Keyboard backlight updates, hotkey handling
 - dell-wmi: Keypress filtering, WMI event processing
 - eeepc-laptop: Multiple cleanups, improved error handling, documentation
 - hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
 - misc: Code cleanups, quirks, various new IDs

* tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits)
  platform/x86/acerhdf: Still depends on THERMAL
  Documentation: Add entry for dell-laptop sysfs interface
  acpi: Remove _OSI(Linux) for ThinkPads
  thinkpad-acpi: Try to use full software mute control
  acerhdf: minor clean up
  acerhdf: added critical trip point
  acerhdf: Use bang-bang thermal governor
  acerhdf: Adding support for new models
  acerhdf: Adding support for "manual mode"
  dell-smo8800: Add more ACPI ids and change description of driver
  platform: x86: dell-laptop: Add support for keyboard backlight
  toshiba_acpi: Add keyboard backlight mode change event
  toshiba_acpi: Change notify funtion to handle more events
  toshiba_acpi: Move hotkey enabling code to its own function
  dell-wmi: Don't report keypresses on keybord illumination change
  dell-wmi: Don't report keypresses for radio state changes
  hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails
  toshiba-acpi: Add missing ID (TOS6207)
  Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put"
  platform: x86: Deletion of checks before backlight_device_unregister()
  ...
2014-12-18 20:24:55 -08:00
Linus Torvalds
ebcffcda31 Merge git://www.linux-watchdog.org/linux-watchdog
Pull small watchdog update from Wim Van Sebroeck:
 - fix the argument of watchdog_active() in imx2_wdt
 - Add power management support to the imx2_wdt watchdog.

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: imx2_wdt: Fix the argument of watchdog_active()
  watchdog: imx2_wdt: Add power management support.
2014-12-18 20:21:32 -08:00
Linus Torvalds
0ec28c37c2 media updates for v3.19-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUksm/AAoJEAhfPr2O5OEV7GIP/1nm2rcf16+6Y7nhjWLgPmlU
 uG9fNUMm7qvFHryCr4RwmTBnCv63Nn/5BFRcXdpAA2gHOtADcHCDNJbtSX+GRN5F
 I0C5gbLbQVd7l/GFsiGTsBScInAQB+ZN0WNyPbF0OCGLuzzRlexadAYTZufnNiNN
 nYCINIBub0jUPJaIrbm/qDAbazS7fxTO9HAdMcJGtexPCO/Gj92+4s8NXI+N3hxk
 Cj87EPsk6i6GA1BM0oVmDWK0dQjgFm+ONMBc8vhFOyVzCXb7pjHg53n1zZ0e0TDt
 jm/h/oIJuWyH/isEuwcNPTBxf2E9EOv8g66V9mDN1i7zsTEf9Bs08fPigalfJ84x
 5S5GBaHEGIu8d2PgqaqxmFO1COyk+xoj9O0Iwx8uabYtyRtgUVaEtsfyHWU2ZiAh
 3wqmtHSK5mt835h9wzjxs18apnRhTwEhfQWzFdiCFxkDPz3vPmfWbm+8WHChtYJh
 j0oSJwzK9uAcYwG8WZi643WduIyrXiDqaglWyBg+7c2k3NhP76W5CpLhjZ+8PrYt
 I6Jf+gZL/Joq5bMQx6itajgE5IIhAfxmdyaYIBqmlXuQ/88zrw7JBwu6q22jSVbq
 +QaURaSJ6qOLYj6S/ip93KPVsUXmfdE1JttuLp4ie7r0Q8zOahr4dPQ/xAwATtY/
 Jeo+d7AI4tLWQcIDKIWi
 =1rPM
 -----END PGP SIGNATURE-----

Merge tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull second set of media updates from Mauro Carvalho Chehab:

 - Move drivers for really old legacy hardware to staging.  Those are
   using obsolete media kAPIs and are for hardware that nobody uses for
   years.  Simply not worth porting them to the new kAPIs.  Of course,
   if anyone pops up to fix, we can move them back from there

 - While not too late, do some API fixups at the new colorspace API,
   added for v3.19

 - Some improvements for rcar_vin driver

 - Some fixups at cx88 and vivid drivers

 - Some Documentation fixups

* tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] bq/c-qcam, w9966, pms: move to staging in preparation for removal
  [media] tlg2300: move to staging in preparation for removal
  [media] vino/saa7191: move to staging in preparation for removal
  [media] MAINTAINERS: vivi -> vivid
  [media] cx88: remove leftover start_video_dma() call
  [media] cx88: add missing alloc_ctx support
  [media] v4l2-ioctl: WARN_ON if querycap didn't fill device_caps
  [media] vivid: fix CROP_BOUNDS typo for video output
  [media] DocBook media: update version number and document changes
  [media] vivid.txt: document new controls
  [media] DocBook media: add missing ycbcr_enc and quantization fields
  [media] v4l2-mediabus.h: use two __u16 instead of two __u32
  [media] rcar_vin: Fix interrupt enable in progressive
  [media] rcar_vin: Enable VSYNC field toggle mode
  [media] rcar_vin: Add scaling support
  [media] rcar_vin: Add DT support for r8a7793 and r8a7794 SoCs
  [media] rcar_vin: Add YUYV capture format support
2014-12-18 20:14:49 -08:00
Linus Torvalds
4c929feed7 Main batch of InfiniBand/RDMA changes for 3.19:
- On-demand paging support in core midlayer and mlx5 driver.  This lets
    userspace create non-pinned memory regions and have the adapter HW
    trigger page faults.
  - iSER and IPoIB updates and fixes.
  - Low-level HW driver updates for cxgb4, mlx4 and ocrdma.
  - Other miscellaneous fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJUk2pBAAoJEENa44ZhAt0hL18P/jdCGbWVXOJh25KvjzmKIfUV
 T3Bdixz5h/Xj2iU6ShsXLSZa8vkPXsiO5v3MIQcR5MuPn88vrxemTy/OmBjefJeL
 qKGnWfy9O8KxMqhYZAokTTIyl5ygtSITbJsCE5W0KHgRBgBtexbrHeFBcWsT3AZ5
 piGyRP4XWc2LtfjrFWdUUjRELz9m74L93uILy0P8lS58k3M8YIOvkjqVmGj5Ya3U
 /hadgk1HYWfxjw+z3v0keaP1IoqHpJferH+UyjCj8UsIB9swXabE8ap/SFrQPIpe
 p+Zwyi25292mavqEfm/neUmvn34xLF8c00XB6UKxr42Q9yd1mDxnO+ZxWpxW5klQ
 tKEZeySDbB/WplGrumCeNXPonFvdBpGOTguP3z5o0bcgj1UJ+yVk8KjNBlwSWhQw
 Mkh/Rb6gSJzeidB3pnQV3TKVkvcFr+Li6DgbG6a77f0W7ggQC2UaeTwEPY5FlMtK
 n2jQddhnXYsQXeOEpDcISbpAnCIx+qjDIRv7jYTajw0hg8A669ytcI/gi4b9qJeU
 l3epZDszbCkRwPACzOXCRfeZRiz1H6/USI+Vn/yIQZBlHEd7TcK6ph+KDO/btX+D
 PWKrirIgzorJsIsDyD4WBXHfJnNS1Imfoxl5s7/8kkwrIkwY+lGpU0zM1bu7cS8W
 c32iGI9+dgHSPTZt3RdL
 =MCO9
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull infiniband updates from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.19:

   - On-demand paging support in core midlayer and mlx5 driver.  This
     lets userspace create non-pinned memory regions and have the
     adapter HW trigger page faults.
   - iSER and IPoIB updates and fixes.
   - Low-level HW driver updates for cxgb4, mlx4 and ocrdma.
   - Other miscellaneous fixes"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (56 commits)
  IB/mlx5: Implement on demand paging by adding support for MMU notifiers
  IB/mlx5: Add support for RDMA read/write responder page faults
  IB/mlx5: Handle page faults
  IB/mlx5: Page faults handling infrastructure
  IB/mlx5: Add mlx5_ib_update_mtt to update page tables after creation
  IB/mlx5: Changes in memory region creation to support on-demand paging
  IB/mlx5: Implement the ODP capability query verb
  mlx5_core: Add support for page faults events and low level handling
  mlx5_core: Re-add MLX5_DEV_CAP_FLAG_ON_DMND_PG flag
  IB/srp: Allow newline separator for connection string
  IB/core: Implement support for MMU notifiers regarding on demand paging regions
  IB/core: Add support for on demand paging regions
  IB/core: Add flags for on demand paging support
  IB/core: Add support for extended query device caps
  IB/mlx5: Add function to read WQE from user-space
  IB/core: Add umem function to read data from user-space
  IB/core: Replace ib_umem's offset field with a full address
  IB/mlx5: Enhance UMR support to allow partial page table update
  IB/mlx5: Remove per-MR pas and dma pointers
  RDMA/ocrdma: Always resolve destination mac from GRH for UD QPs
  ...
2014-12-18 20:10:44 -08:00
Nicholas Bellinger
ae450e246e target: Allow AllRegistrants to re-RESERVE existing reservation
This patch changes core_scsi3_pro_release() logic to allow an
existing AllRegistrants type reservation to be re-reserved by
any registered I_T nexus.

This addresses a issue where AllRegistrants type RESERVE was
receiving RESERVATION_CONFLICT status if dev_pr_res_holder did
not match the same I_T nexus, instead of just returning GOOD
status following spc4r34 Section 5.9.9:

"If the device server receives a PERSISTENT RESERVE OUT command
 with RESERVE service action where the TYPE field and the SCOPE
 field contain the same values as the existing type and scope
 from a persistent reservation holder, it shall not make any
 change to the existing persistent reservation and shall complete
 the command with GOOD status."

Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-19 01:08:32 +00:00
Linus Torvalds
00c845dbfe Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix NBMA tunnel mac header handling in GRE, from Timo Teräs.

 2) Fix a NAPI race in the fec driver, from Nimrod Andy.

 3) The new IFF_VNET_LE bit is outside the size of the flags member it
    is stored in (which is 16-bits), store the state locally in the
    drivers.  From Michael S Tsirkin.

 4) We are kicking the tires with the new wireless maintainership
    situation.  Bluetooth fixes via Johan Hedberg, and mac80211 fixes
    from Johannes Berg.

 5) Fix locking and leaks in geneve driver, from Jesse Gross.

 6) Make netlink TX mmap code always copy, so we don't have to be
    potentially exposed to the user changing the underlying contents
    from underneath us.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (63 commits)
  be2net: Fix incorrect setting of tunnel offload flag in netdev features
  bnx2x: fix typos in "configure"
  xen-netback: support frontends without feature-rx-notify again
  MAINTAINERS: changes for wireless
  cxgb4: Fix decoding QSA module for ethtool get settings
  geneve: Fix races between socket add and release.
  geneve: Remove socket and offload handlers at destruction.
  netlink: Don't reorder loads/stores before marking mmap netlink frame as available
  netlink: Always copy on mmap TX.
  Bluetooth: Fix bug with filter in service discovery optimization
  mac80211: free management frame keys when removing station
  net: Disallow providing non zero VLAN ID for NIC drivers FDB add flow
  net/mlx4: Cache line CQE/EQE stride fixes
  net: fec: Fix NAPI race
  xen-netfront: use napi_complete() correctly to prevent Rx stalling
  ip_tunnel: Add missing validation of encap type to ip_tunnel_encap_setup()
  ip_tunnel: Add sanity checks to ip_tunnel_encap_add_ops()
  net: Allow FIXED_PHY to be modular.
  if_tun: drop broken IFF_VNET_LE
  macvtap: drop broken IFF_VNET_LE
  ...
2014-12-18 16:41:13 -08:00
Sriharsha Basavapatna
ac9a3d84e1 be2net: Fix incorrect setting of tunnel offload flag in netdev features
An earlier commit to resolve an issue with encapsulation offloads missed
setting a bit in the outer netdev features flag. This results in loss of TSO
feature on a VxLAN interface.

Fixes: 630f4b70 ("Export tunnel offloads only when a VxLAN tunnel is created")

Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18 12:51:29 -05:00
Jiri Benc
bf27c3537c bnx2x: fix typos in "configure"
Noticed when debugging ptp.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18 12:50:36 -05:00
David Vrabel
26c0e10258 xen-netback: support frontends without feature-rx-notify again
Commit bc96f648df (xen-netback: make
feature-rx-notify mandatory) incorrectly assumed that there were no
frontends in use that did not support this feature.  But the frontend
driver in MiniOS does not and since this is used by (qemu) stubdoms,
these stopped working.

Netback sort of works as-is in this mode except:

- If there are no Rx requests and the internal Rx queue fills, only
  the drain timeout will wake the thread.  The default drain timeout
  of 10 s would give unacceptable pauses.

- If an Rx stall was detected and the internal Rx queue is drained,
  then the Rx thread would never wake.

Handle these two cases (when feature-rx-notify is disabled) by:

- Reducing the drain timeout to 30 ms.

- Disabling Rx stall detection.

Reported-by: John <jw@nuclearfallout.net>
Tested-by: John <jw@nuclearfallout.net>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18 12:49:49 -05:00
Rafael J. Wysocki
2ec1c17cad Merge branches 'pm-opp', 'pm-cpufreq' and 'pm-tools'
* pm-opp:
  PM / OPP: do error handling at the bottom of dev_pm_opp_add_dynamic()
  PM / OPP: handle allocation of device_opp in a separate routine
  PM / OPP: reuse find_device_opp() instead of duplicating code
  PM / OPP: Staticize __dev_pm_opp_remove()
  PM / OPP: replace kfree with kfree_rcu while freeing 'struct device_opp'

* pm-cpufreq:
  MAINTAINERS: add entry for intel_pstate
  intel_pstate: Add a few comments
  intel_pstate: add kernel parameter to force loading

* pm-tools:
  Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
2014-12-18 18:44:53 +01:00
Rafael J. Wysocki
035f10ee4e Merge branch 'pm-runtime'
* pm-runtime:
  power / PM: Eliminate CONFIG_PM_RUNTIME
  NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c
  PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
  mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro
  PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
  ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-18 18:44:05 +01:00
Rafael J. Wysocki
0a06664286 Merge branches 'acpi-fan', 'acpi-video' and 'acpi-ec'
* acpi-fan:
  ACPI / Fan: Use bus id as the name for non PNP0C0B (Fan) devices

* acpi-video:
  ACPI / video: update the skip case for acpi_video_device_in_dod()

* acpi-ec:
  ACPI / EC: Fix unexpected ec_remove_handlers() invocations
2014-12-18 18:43:16 +01:00
Rafael J. Wysocki
be10f60d29 Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm'
* acpi-scan:
  ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG

* acpi-utils:
  ACPI / utils: Drop error messages from acpi_evaluate_reference()

* acpi-pm:
  ACPI / PM: Do not disable wakeup GPEs that have not been enabled
2014-12-18 18:42:56 +01:00
Hariprasad Shenai
5aa80e5144 cxgb4: Fix decoding QSA module for ethtool get settings
QSA module was getting decoded as QSFP module in ethtool get settings, this
patch fixes it.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18 12:39:16 -05:00