Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
-----BEGIN PGP SIGNATURE-----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=5lho
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.14 merge window
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
ARM: dts: omap5-board-common: align gpio hog names with dt-schema
ARM: dts: omap3: align gpio hog names with dt-schema
ARM: dts: am437x: align gpio hog names with dt-schema
ARM: dts: am335x: align GPIO hog names with dt-schema
ARM: dts: osd3358-sm-red: group in the same phandle all its properties
ARM: dts: dra76-evm: remove ov5640
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLCiTgAKCRCKwlD9ZEnx
cNB6AP40CBtMLlW/h/DGCvm3iW8bRwHrBiuXeYrcHeJh1DoXFQEA3foLN4s5FZIQ
ZXFFOAgGVMHQft1o0qL0nO0ytw7zhg8=
=YIvB
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: alt: Add SW2 as GPIO keys
ARM: dts: renesas: Move enable-method to CPU nodes
arm64: dts: renesas: beacon: Fix USB ref clock references
arm64: dts: renesas: beacon: Fix USB extal reference
ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
arm64: dts: renesas: eagle: Add x1 clock
ARM: dts: koelsch: Rename sw2 to keyboard
ARM: dts: r8a7779, marzen: Fix DU clock names
arm64: dts: renesas: v3msk: Fix memory size
arm64: dts: renesas: condor: Switch eMMC bus to 1V8
arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
arm64: dts: renesas: beacon kit: Setup AVB refclk
arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list
Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
-----BEGIN PGP SIGNATURE-----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=/Twf
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: remove xxx-cells from display
ARM: dts: gemini-dlink-dir-685: Remove address from display port
ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
ARM: dts: gemini: convert obsolete SPI properties
ARM: dts: gemini: use the right rtc compatible
ARM: dts: gemini: add device_type on pci
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
ARM: dts: gemini: rename mdio to the right name
MAINTAINERS: gemini: add missing dts pattern
Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
-----BEGIN PGP SIGNATURE-----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=W/eR
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix up the IXP4xx ethernet nodes
ARM: dts: ixp4xx: Add beeper to the NSLU2
ARM: dts: ixp4xx: Create a proper expansion bus
ARM: dts: ixp4xx: Add PCI hosts
ARM: dts: ixp4xx: Add ethernet
Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The first UART controller in "Everything-Else" power domain, usually used
for Bluetooth HCI has 128bytes FIFO depth.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210518075833.3736038-4-narmstrong@baylibre.com
Enable audio capture frontends and a tdm decoder.
This makes it possible to loopback the audio played on the hdmi codec,
which is the only output interface at the moment.
Of course, one TODDR device would be enough to do that but since
the 3 FRDDRs are enabled on the playback side, let's do the same on the
capture side.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210429084253.59692-1-jbrunet@baylibre.com
A number of sub-mailbox node names in various OMAP2+ dts files are
currently using underscores. This is not adhering to the node name
convention, fix all of these to use hiphens.
These nodes are already using the prefix mbox, so they will be in
compliance with the sub-mailbox node name convention being added in
the OMAP Mailbox YAML binding as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The OMAP sub-mailbox used to communicate with the Wakeup M3 remote
processor is currently named wkup_m3. This name can be confused with
the remote processor node. So, rename this to mbox-wkup-m3 to remove
the ambiguity and to also adhere to the sub-mailbox node name convention
being added in the OMAP Mailbox YAML binding.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The OMAP sub-mailbox used to communicate with the DSP and IVA remote
processors are currently named after the processor name. These can be
confused with the remote processors themselves. Rename them to remove
the ambiguity and use the prefix mbox to also adhere to the sub-mailbox
node name convention being added in the OMAP Mailbox YAML binding.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The interrupt-names property is neither defined nor used in either
of the OMAP Mailbox binding or the driver. So, drop them. This is
in preparation for converting the OMAP Mailbox binding to YAML
format.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,omap2-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,omap4-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
According to Documentation/devicetree/bindings/arm/cpus.yaml, the
"enable-method" property should be a property of the individual CPU
nodes, and not of the parent "cpus" container node.
However, on R-Car Gen2 and RZ/G1 SoCs, the property is tied to the
"cpus" node instead.
Secondary CPU bringup and CPU hot (un)plug work regardless, as
arm_dt_init_cpu_maps() falls back to looking in the "cpus" node.
The cpuidle code does not have such a fallback, so it does not detect
the enable-method. Note that cpuidle does not support the
"renesas,apmu" enable-method yet, so for now this does not make any
difference.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/35fcfedf9de9269185c48ca5a6dfcba7cdd3484b.1621427319.git.geert+renesas@glider.be
The RZ/G2 boards expect there to be an external clock reference for
USB2 EHCI controllers. For the Beacon boards, this reference clock
is controlled by a programmable versaclock. Because the RZ/G2
family has a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.
Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The USB extal clock reference isn't associated to a crystal, it's
associated to a programmable clock, so remove the extal reference,
add the usb2_clksel. Since usb_extal is referenced by the versaclock,
reference it here so the usb2_clksel can get the proper clock speed
of 50MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
"make dtbs_check" complains:
arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected
Change the first clock name to match the DT bindings.
This has no effect on actual operation, as the Display Unit driver in
Linux does not use the first clock name on R-Car H1, but just grabs the
first clock.
Fixes: 665d79aa47 ("ARM: shmobile: marzen: Add DU external pixel clock to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/9d5e1b371121883b3b3e10a3df43802a29c6a9da.1619699965.git.geert+renesas@glider.be
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Condor, the VCC is connected to
3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux
to match the bus, which is always operating in 1.8V mode.
While at it, deduplicate the pinmux entries, which are now the same for
both default and UHS modes. We still need the two pinctrl entries to
match the bindings though.
Thanks to Marek Vasut for this description from commit 5f65328df3
("arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB").
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210419143858.39401-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The AVB reference clock assumes an external clock that runs
automatically. Because the Versaclock is wired to provide the
AVB refclock, the device tree needs to reference it in order for the
driver to start the clock.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210224115146.9131-5-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The bindings have been updated to support two clocks.
Add a clock-names list in the device tree with fck in it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224115146.9131-3-aford173@gmail.com
[geert: Update new r8a779a0.dtsi]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The bindings have been updated to support two clocks.
Add a clock-names list in the device tree with fck in it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224115146.9131-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
- Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as this
can cause malfunction when TOS is not supported.
- Allocate the LBR XSAVE buffers along with the DS buffers upfront because
allocating them when adding an event can deadlock.
-----BEGIN PGP SIGNATURE-----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=7WGT
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two perf fixes:
- Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
this can cause malfunction when TOS is not supported
- Allocate the LBR XSAVE buffers along with the DS buffers upfront
because allocating them when adding an event can deadlock"
* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
- Invoke the lockdep tracepoints in the correct place so the ordering
is correct again.
- Don't leave the mutex WAITER bit stale when the last waiter is dropping
out early due to a signal as that forces all subsequent lock operations
needlessly into the slowpath until it's cleaned up again.
-----BEGIN PGP SIGNATURE-----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=7vqW
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two locking fixes:
- Invoke the lockdep tracepoints in the correct place so the ordering
is correct again
- Don't leave the mutex WAITER bit stale when the last waiter is
dropping out early due to a signal as that forces all subsequent
lock operations needlessly into the slowpath until it's cleaned up
again"
* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
locking/lockdep: Correct calling tracepoints
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails.
- Make the APPLE AIC chip driver depend on APPLE.
- Remove redundant error output on devm_ioremap_resource() failure.
-----BEGIN PGP SIGNATURE-----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=XjHi
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
of killing the machine and by using the accessors with the exact functionality
needed when accessing memory.
- Fix a confusion with Clang LTO compiler switches passed to the it
- Handle the case gracefully when VMGEXIT has been executed in userspace
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCqKdwACgkQEsHwGGHe
VUrnfBAAitJ9ytn5PzrLhg9cKt+BRVg8QQExWUYqOrSDXHus5+X/21YKey7BBhIj
rMJSHi7qytO5rrfj5nw3dIH30hnat8nn5GWcNMG0hi1ptep+GP0xMG1nGw7INJDW
85FpQI9jpO+vz0AcoZYAtSOWbwonVqbhjdHGzDhIi2e0Qt+1uKbjsT+iPxANBpyB
fyEU3biPyWfKY4JSr1n0EHBywR329IW5I+yZInb2SBEU42V4vDBGFCXgdS8eFGo5
KPz/bikERC/gZuDIRXDP6riKIpy1yCO1JZb0EgukwDddbzNz/ox7dX9JL+dEeRzl
0zr28cJSoZgYQjdi3LU412CMVa8eYw7Ca0/mbhADdZK6Wd7xUNEiUR7FFoBA2Jxp
+oYzYe4KvlsaFQyPrt8mfJDA36r+FZcqr3WJF+LYmPbRi+cbNDbKSoeDqShAh+Fq
uUVNloWiOltsRuCS5/du8qzhmJLdIH1uFqtYK37PGLzAHz+KJ9SAdLWaYaLx4GFd
rrFuCnk5DmoDf3I5lQvIzIEmYysEQOloGgDR6dDaPFRymOgor7BsCdR+dtxVQ6P6
SMSUzyJLq4tC4dzT5PxWfZDlO+wIxu5QAOhu95oWIdZbsaoABZYCuLf7T7XQr9PA
DLil4v4i7/FGpDBh+2s3V5hTXHKATuI7SGXnMNfx1eLurChg07k=
=51BK
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix how SEV handles MMIO accesses by forwarding potential page faults
instead of killing the machine and by using the accessors with the
exact functionality needed when accessing memory.
- Fix a confusion with Clang LTO compiler switches passed to the it
- Handle the case gracefully when VMGEXIT has been executed in
userspace
* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __put_user()/__get_user() for data accesses
x86/sev-es: Forward page-faults which happen during emulation
x86/sev-es: Don't return NULL from sev_es_get_ghcb()
x86/build: Fix location of '-plugin-opt=' flags
x86/sev-es: Invalidate the GHCB after completing VMGEXIT
x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
Fix breakage of strace (and other ptracers etc.) when using the new scv ABI (Power9 or
later with glibc >= 2.33).
Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to: Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, Christophe Leroy.
-----BEGIN PGP SIGNATURE-----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=qeQq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix breakage of strace (and other ptracers etc.) when using the new
scv ABI (Power9 or later with glibc >= 2.33).
- Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.
* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
powerpc: Fix early setup to make early_ioremap() work
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
userfaultfd: hugetlbfs: fix new flag usage in error path
lib: kunit: suppress a compilation warning of frame size
proc: remove Alexey from MAINTAINERS
linux/bits.h: fix compilation error with GENMASK
watchdog: reliable handling of timestamps
kasan: slab: always reset the tag in get_freepointer_safe()
tools/testing/selftests/exec: fix link error
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
Revert "mm/gup: check page posion status for coredump."
mm/shuffle: fix section mismatch warning
In commit d6995da311 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve. Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.
Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation. Specifically, this would be the
result of an unlikely copy_huge_page_from_user error. There is not an
increased chance of hitting the VM_BUG_ON.
Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com
Fixes: d6995da311 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasry.mina@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
