This helper is used for variant drivers to allocate struct dw_mci
and set struct dw_mci as private data of struct mmc_host.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It's pointless to use a queue if only one slot is supported.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
struct dw_mci has already kept mrq, so removing keeping mrq again from
struct dw_mci_slot.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Except for moving them, this patch also renames __clk_old to clk_old.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There is only one slot support, the sdio_id is used to indicate the SDIO
slot and where is the irq located. So it's pointless now, remove it. Given
sdio_id0 is only used by Rockchip to inform dwc core the irq is located
with a offset, rename sdio_id0 to sdio_irq to reflect the fact.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There is only one slot support, id should be zero. So no need
to keep it in track as long as ctype associated.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
With this, dw_mmc-exynos.c will not need to access slot. While at it, since
the host->slot is always present when calling
dw_mci_exynos_set_clksel_timing(), let's remove it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch changes the callbacks of switch_voltage() and execute_tuning()
in order for variant drivers to avoid accessing to struct dw_mci_slot.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move struct mmc_host to struct dw_mci in preparation for removing dw_mci_slot.
No functional change intended.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some header files are not needed and they are out of order, this patch
remove unused header files and re-order them alphabetically.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_regulator_set_ocr() already checks if vqmmc is correct.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
commit 51da224090 ("mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators")
introduced tracking of vqmmc_enabled. Currently, mmc_regulator_enable_vqmmc()
and mmc_regulator_disable_vqmmc() well record the status of vqmmc, so use
these two helpers to remove vqmmc_enabled locally. With vqmmc_enabled gone,
resetting controller on MMC_POWER_ON phase won't work as dw_mci_set_ios()
will be called several times during enumerating which leads to reset the
controller several times too. This messes up the status machine of controller.
By looking into the commit d1f1dd8600 ("mmc: dw_mmc: Give a good reset
after we give power"), it tried to solve failures on rk3288. The problem
is probably because the vqmmc is used for IO block associated with dw
controller. When SD is removed during I/O, cutting off vqmmc in MMC_POWER_OFF
phase will confuse the controller as its status machine refers to several
IO status, such as data_state_mc_busy and data_busy on SDMMC_STATUS reg.
So the controller could run into an unexpected state and could not enumerate
cards correctly the next time. Reset it on MMC_POWER_ON phase or MMC_POWER_OFF
phase should work, let's do the latter.
This patch is tested on RK3588s/RK3399/RK3576 EVB with TF cards with both
vqmmc present or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Arasan SDHCI controller is DMA coherent on the APM merlin SoC, so allow
the dma-coherent property. No reason implementations can't also be coherent
and there's not an SoC specific compatible, so allow it on any platform.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Broadcom iProc SDHCI controller is DMA coherent and/or behind an IOMMU
on some Broadcom SoCs, so allow the dma-coherent and iommus properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The AMD Pensando ELBA DT defines no reset for the SDHCI, so it is obviously
not required.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On IMX7ULP platforms, certain SD cards (e.g. Kingston Canvas Go! Plus)
cause system hangs and reboots during manual tuning. These cards exhibit
large gaps (~16us) between tuning command response and data transmission.
When cmd CRC errors occur during tuning, the code assumes data errors even
tuning data hasn't been fully received and then reset host data circuit.
Per IMX7ULP reference manual, reset operations (RESET_DATA/ALL) need to
make sure no active data transfers. Previously, resetting while data was
in-flight would clear data circuit, including ADMA/SDMA address, causing
data to be transmitted to incorrect memory address. This patch adds
polling for data transfer completion before executing resets.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Reviewed-by: Bough Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Even though MMC IP in MT8189 SoC is partially compatible with the one
found in MT8196 SoC, its register layout has some slight differences
and additional features such as the system power management release
resource control support.
Thus, add new compatible and platform data to support this SoC.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The MT8189 SoC has in the status register an additional bit field to
release all System Power management (SPM) resource requests.
In preparation of MT8189 SoC support, add its use in suspend callback
and a support flag in the platform data.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a new compatible for MMC IP in MT8189 SoC.
Even though this is partially compatible with the one found in MT8196
SoC, the MT8189 SoC register layout has some slight differences and
additional features.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some eMMC vendors need to report manufacturing dates beyond 2025 but are
reluctant to update the EXT_CSD revision from 8 to 9. Changing the
Updating the EXT_CSD revision may involve additional testing or
qualification steps with customers. To ease this transition and avoid a
full re-qualification process, a workaround is needed. This
patch introduces a temporary quirk that re-purposes the year codes
corresponding to 2010, 2011, and 2012 to represent the years 2026, 2027,
and 2028, respectively. This solution is only valid for this three-year
period.
After 2028, vendors must update their firmware to set EXT_CSD_REV=9 to
continue reporting the correct manufacturing date in compliance with the
JEDEC standard.
The `MMC_QUIRK_BROKEN_MDT` is introduced and enabled for all Sandisk
devices to handle this behavior.
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Enable Inline Crypto Engine (ICE) support for CQE-capable sdhci-msm
controllers when used with eMMC cards that do not support CQE.
This addresses the scenario where:
- The host controller supports CQE (and has CQHCI crypto infrastructure)
- The eMMC card does not support CQE
- Standard (non-CMDQ) requests need crypto support
This allows hardware-accelerated encryption and decryption for standard
requests on CQE-capable hardware by utilizing the existing CQHCI crypto
register space even when CQE functionality is not available due to card
limitations.
The implementation:
- Adds ICE register definitions for non-CQE crypto configuration
- Implements per-request crypto setup via sdhci_msm_ice_cfg()
- Hooks into the request path via mmc_host_ops.request for non-CQE requests
- Uses CQHCI register space (NONCQ_CRYPTO_PARM/DUN) for crypto configuration
With this, CQE-capable controllers can benefit from inline encryption
when paired with non-CQE cards, improving performance for encrypted I/O
while maintaining compatibility with existing CQE crypto support.
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
dw_mci_prepare_desc64() and dw_mci_prepare_desc32() duplicate a lot of
code, add a new dw_mci_prepare_desc() to save the bits.
No functional change intended.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aUJatHzP5fr1zvRF@stanley.mountain
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
None of the variant drivers pass in dma_pdata, which means it's
unused and could be removed.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The restore path for SDIO_CFG_CORE_V1 was incorrectly using
SDIO_CFG_SD_PIN_SEL (offset 0x44) instead of SDIO_CFG_V1_SD_PIN_SEL
(offset 0x54), causing the wrong register to be written on resume.
The save path already uses the correct V1-specific offset. This
affects BCM7445 and BCM72116 platforms which use the V1 config core.
Fixes: b7e614802e ("mmc: sdhci-brcmstb: save and restore registers during PM")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Cc: stable@vger.kernel.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
RK3576 is the first platform to introduce internal phase support, and
subsequent platforms are expected to adopt a similar design. In this
architecture, runtime suspend powers off the attached power domain, which
resets registers, including vendor-specific ones such as SDMMC_TIMING_CON0,
SDMMC_TIMING_CON1, and SDMMC_MISC_CON. These registers must be saved and
restored, a requirement that falls outside the scope of the dw_mmc core.
Fixes: 59903441f5 ("mmc: dw_mmc-rockchip: Add internal phase support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In of_get_dml_pipe_index(), it does not release the reference.
Fixes: 9cb15142d0 ("mmc: mmci: Add qcom dml support to the driver.")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtg+xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKwQ+AQCiXEYAibl3vHRgQo7qEPCC5or4FtkF
HZ0ERRArhsU17AD/TKHE/AJkyFrwK4rGTb6I9Wi1OXnpG7jihZlYjj03Ag4=
=CUql
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
Fix a big endian specific issue in the PPC64-optimized AES code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtiphQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK/z2AQD1j15Ao3iDW3yBSyTS+tFJaRUVDtjg
bNostoNJAjMM9wD/X0oAnt95WTNkdHexs+2aMzQ4ULKFRcwQrUTarKx7IgY=
=Dmfx
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix a big endian specific issue in the PPC64-optimized AES code"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc/aes: Fix rndkey_from_vsx() on big endian CPUs
Stephen retired and stepped back from -next maintainership, update his
entry in CREDITS to recognise his 18 years of hard work making it what
it is today and all the impact it's had on our development process.
Also update to his current GnuPG key while we're here.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The x509 public key code gained a dependency on the sha256 hash
implementation, causing a rare link time failure in randconfig
builds:
arm-linux-gnueabi-ld: crypto/asymmetric_keys/x509_public_key.o: in function `x509_get_sig_params':
x509_public_key.c:(.text.x509_get_sig_params+0x12): undefined reference to `sha256'
arm-linux-gnueabi-ld: (sha256): Unknown destination type (ARM/Thumb) in crypto/asymmetric_keys/x509_public_key.o
x509_public_key.c:(.text.x509_get_sig_params+0x12): dangerous relocation: unsupported relocation
Select the necessary library code from Kconfig.
Fixes: 2c62068ac8 ("x509: Separately calculate sha256 for blacklist")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Align to the commit bf4afc53b7 ("Convert 'alloc_obj' family to use the
new default GFP_KERNEL argument") update the 'kmalloc_obj' declaration
for userspace to fix below compile error:
In file included from arch/arm/boot/compressed/../../../../lib/decompress_unxz.c:241,
from arch/arm/boot/compressed/decompress.c:56:
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'xz_dec_init':
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c:787:28: error: implicit declaration of function 'kmalloc_obj'; did you mean 'kmalloc'? [-Wimplicit-function-declaration]
787 | struct xz_dec *s = kmalloc_obj(*s);
| ^~~~~~~~~~~
| kmalloc
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Fixes: bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0.
- Fix 'objtool' warning for Rust 1.84.0.
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0.
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate).
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust 1.95.0.
-----BEGIN PGP SIGNATURE-----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=DOG1
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
Summary of changes:
- Fix multiple definition of __pcpu_unique_da_mon_this
After refactoring monitors, we used static per-cpu variables with the
same names across different per-cpu monitors. This is explicitly
disallowed for modules on some architectures (alpha) or if
CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug
kernel). Make sure all those variables have different names to avoid
compilation issues.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaZoJ1BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkykAP41lj9VAe0dM81f20IfOBhqIBZPS6MP
ajRGZ9bz1ZiJwwD/dHm+APheD7umImzoDXpW1IJxgNPlZTnpte3WyhIYaQs=
=HxRz
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fix from Steven Rostedt:
- Fix multiple definition of __pcpu_unique_da_mon_this
After refactoring monitors, we used static per-cpu variables with the
same names across different per-cpu monitors. This is explicitly
disallowed for modules on some architectures (alpha) or if
CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug
kernel). Make sure all those variables have different names to avoid
compilation issues.
* tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix multiple definition of __pcpu_unique_da_mon_this
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most simple allocations use GFP_KERNEL, and with the new allocation
helpers being introduced, let's just take advantage of that to simplify
that default case.
It's a numbers game:
git grep 'alloc_obj(' |
sed 's/.*\(GFP_[_A-Z]*\).*/\1/' |
sort | uniq -c | sort -n | tail
shows that about 90% of all those new allocator instances just use that
standard GFP_KERNEL.
Those helpers are already macros, and we can easily just make it be the
default case when the gfp argument is missing.
And yes, we could do that for all the legacy interfaces too, but let's
keep it to just the new ones at least for now, since those all got
converted recently anyway, so this is not any "extra" noise outside of
that limited conversion.
And, in fact, I want to do this before doing the -rc1 release, exactly
so that we don't get extra merge conflicts.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for
non-scalar types") started using the new allocation helpers, and in the
process showed that they were completely non-working.
The overflow logic in overflows_flex_counter_type() is completely the
wrong way around, and that broke __alloc_flex() completely. By chance,
the resulting code was then such a mess that clang generated
sufficiently garbage code that objtool warned about it all. Which made
it somewhat quicker to narrow things down.
While fixing overflows_flex_counter_type() would presumably fix this
all, I'm excising the whole broken overflow logic from __alloc_flex(),
because we don't want that kind of code in basic allocation functions
anyway.
That (no longer) broken overflows_flex_counter_type() thing needs to be
inserted into the actual __set_flex_counter() logic in the unlikely case
that we ever want this at all. And made conditional.
Fixes: 81cee9166a ("compiler_types: Introduce __flex_counter() and family")
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Cc: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/all/CAHk-=whEd020BYzGTzYrENjD9Z5_82xx6h8HsQvH5xDSnv0=Hw@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaZl14wAKCRA2KwveOeQk
uz8aAQCBFLYlij3Y3ivVADkBxuVF3xECaznFya41ENYsBwlHdwEArXqMyNrw+DiG
TvWCK/tiddNmGIRpI2sxBFzyRpsHfAY=
=rVD3
-----END PGP SIGNATURE-----
Merge tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj conversion from Kees Cook:
"This does the tree-wide conversion to kmalloc_obj() and friends using
coccinelle, with a subsequent small manual cleanup of whitespace
alignment that coccinelle does not handle.
This uncovered a clang bug in __builtin_counted_by_ref(), so the
conversion is preceded by disabling that for current versions of
clang. The imminent clang 22.1 release has the fix.
I've done allmodconfig build tests for x86_64, arm64, i386, and arm. I
did defconfig builds for alpha, m68k, mips, parisc, powerpc, riscv,
s390, sparc, sh, arc, csky, xtensa, hexagon, and openrisc"
* tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kmalloc_obj: Clean up after treewide replacements
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
compiler_types: Disable __builtin_counted_by_ref for Clang
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters.
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='.
- Data-type profiling fixes and improvements including the ability
to select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with
C and Rust workloads.
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'.
- Fix printing of leaf IP in LBR callchains.
- Fix display of metrics without sufficient permission in 'perf stat'.
- Print all machines in 'perf kvm report -vvv', not just the host.
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code.
- Fix 'perf report's histogram entry collapsing with '-F' option.
- Use system's cacheline size instead of a hardcoded value in 'perf
report'.
- Allow filtering conversion by time range in 'perf data'.
- Cover conversion to CTF using 'perf data' in 'perf test'.
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues.
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with.
- Build support for generating metrics from arch specific python script,
add extra AMD, Intel, ARM64 metrics using it.
- Add AMD Zen 6 events and metrics.
- Add JSON file with OpenHW Risc-V CVA6 hardware counters.
- Add 'perf kvm' stats live testing.
- Add more 'perf stat' tests to 'perf test'.
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390.
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin.
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaZn25QAKCRCyPKLppCJ+
J9MbAQCTKChBwDsqVh5iPr0UAc+mez9LOPJFa580SYH9nmd1jgD+Oqip7xCf514G
ZtYPNh+Mz0se0Mcb++syLUEjxvbrQQY=
=y2VY
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='
- Data-type profiling fixes and improvements including the ability to
select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with C and
Rust workloads
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'
- Fix printing of leaf IP in LBR callchains
- Fix display of metrics without sufficient permission in 'perf stat'
- Print all machines in 'perf kvm report -vvv', not just the host
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code
- Fix 'perf report's histogram entry collapsing with '-F' option
- Use system's cacheline size instead of a hardcoded value in 'perf
report'
- Allow filtering conversion by time range in 'perf data'
- Cover conversion to CTF using 'perf data' in 'perf test'
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with
- Build support for generating metrics from arch specific python
script, add extra AMD, Intel, ARM64 metrics using it
- Add AMD Zen 6 events and metrics
- Add JSON file with OpenHW Risc-V CVA6 hardware counters
- Add 'perf kvm' stats live testing
- Add more 'perf stat' tests to 'perf test'
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS
* tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (255 commits)
perf test script: Add python script testing support
perf test script: Add perl script testing support
perf script: Allow the generated script to be a path
perf test: perf data --to-ctf testing
perf test: Test pipe mode with data conversion --to-json
perf json: Pipe mode --to-ctf support
perf json: Pipe mode --to-json support
perf check: Add libbabeltrace to the listed features
perf build: Allow passing extra Clang flags via EXTRA_BPF_FLAGS
perf test data_type_profiling.sh: Skip just the Rust tests if code_with_type workload is missing
tools build: Fix feature test for rust compiler
perf libunwind: Fix calls to thread__e_machine()
perf stat: Add no-affinity flag
perf evlist: Reduce affinity use and move into iterator, fix no affinity
perf evlist: Missing TPEBS close in evlist__close()
perf evlist: Special map propagation for tool events that read on 1 CPU
perf stat-shadow: In prepare_metric fix guard on reading NULL perf_stat_evsel
Revert "perf tool_pmu: More accurately set the cpus for tool events"
tools build: Emit dependencies file for test-rust.bin
tools build: Make test-rust.bin be removed by the 'clean' target
...
This patch series, from Benjamin Philip <benjamin.philip495@gmail.com>,
simplifies and clarifies the handling of output generated by Coccinelle
that is sent to standard error. By default, this information goes to
/dev/null. The patch series reminds the user of that and encourages
them to provide another file name.
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEnGZC8gbRfLXdcpA0F+92B3f5RZ0FAmmZ3sYACgkQF+92B3f5
RZ0PLg//Zf3ObDD4RTHw3gjlqYJmFY2I85qS6vj1rc0/VFRbvKH0AHC1l6GwqSNS
/rEBvnEy57UxlsKn6HVN+wYoPt9XiOeId4XeroW8efLp4xHT4TQHhjE19cYxre7D
Bp3Cs8GZuPkTh0xxozz6/Pr4oQRnrOtVbkgvYo8Yd+4X2KMbbhFyfOg0ft+Vb64h
7w0nvGHmEEmW0UOI77RPZ0ozC8JHSwqWaUCvpkFOEqO9MNh59+oWgtZCPv/kZCfl
VktsPfBN7bmxUZwuTgXnIheDj4Nst9XrZeSNinamaN0sEwPv08iiYPXSRxnIn/EV
PXEBeX7DrGHJ2V7dXwXbd4E4zMvdn2Hm399iFMlw9zEfI0RbmoI/uJL3IKCP5r5K
kHAmsQQbMxac3THvAQOZutJ79KJ70old7dAzkx2Dq9CWe1sZYltBrWRcSM9po6+r
T/RAu/YH04kQXyZ20Sk7lYoVVU7oTV12zBNhwq1aV92lM+4fZWh5Pp8klo2LgcJh
R0PLNjwFTA2LCQ6K14tOaNbxDg/87y5SVB9+xpPmRRnI7v2WeysPBVrVlKFES5+x
cwkxpFSga7XJ6ehNCj1uiBWv2VWiDlvu1cznCZmb2B8jOAwd8TfbF6+DdYHwmbrM
qnHV4LorsfKyIrSz3PaHqbjUiytQNlQmfpPDeNVJZSf8ZN5tLfc=
=+f+s
-----END PGP SIGNATURE-----
Merge tag 'cocci-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"This simplifies and clarifies the handling of output generated by
Coccinelle that is sent to standard error.
By default, this goes to /dev/null. Remind the user of that and
encourage them to provide another file name (Benjamin Philip)"
* tag 'cocci-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Documentation: Coccinelle: document debug log handling
scripts: coccicheck: warn on unset debug file
scripts: coccicheck: simplify debug file handling
cleanups, and new hardware support. ntb_transport QP stats are
converted to seq_file, a tx_memcpy_offload module parameter is
introduced with associated ordering fixes, and a debugfs queue
name truncation bug is corrected. Additional fixes address format
specifier mismatches in ntb_tool and boundary conditions in the
Switchtec driver, while unused MSI helpers are removed and the
codebase migrates to dma_map_phys(). Intel Gen6 (Diamond Rapids)
NTB support is also added.
-----BEGIN PGP SIGNATURE-----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=UZw9
-----END PGP SIGNATURE-----
Merge tag 'ntb-7.0' of https://github.com/jonmason/ntb
Pull NTB (PCIe non-transparent bridge) updates from Jon Mason:
"NTB updates include debugfs improvements, correctness fixes, cleanups,
and new hardware support:
ntb_transport QP stats are converted to seq_file, a tx_memcpy_offload
module parameter is introduced with associated ordering fixes, and a
debugfs queue name truncation bug is corrected.
Additional fixes address format specifier mismatches in ntb_tool and
boundary conditions in the Switchtec driver, while unused MSI helpers
are removed and the codebase migrates to dma_map_phys().
Intel Gen6 (Diamond Rapids) NTB support is also added"
* tag 'ntb-7.0' of https://github.com/jonmason/ntb:
NTB: ntb_transport: Use seq_file for QP stats debugfs
NTB: ntb_transport: Fix too small buffer for debugfs_name
ntb/ntb_tool: correct sscanf format for u64 and size_t in tool_peer_mw_trans_write
ntb: intel: Add Intel Gen6 NTB support for DiamondRapids
NTB/msi: Remove unused functions
ntb: ntb_hw_switchtec: Increase MAX_MWS limit to 256
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
NTB: epf: allow built-in build
ntb: migrate to dma_map_phys instead of map_page
NTB: ntb_transport: Add 'tx_memcpy_offload' module option
NTB: ntb_transport: Remove unused 'retries' field from ntb_queue_entry
-----BEGIN PGP SIGNATURE-----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=Pkge
-----END PGP SIGNATURE-----
Merge tag 'io_uring-20260221' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- A fix for a missing URING_CMD128 opcode check, fixing an issue with
the SQE mixed mode support introduced in 6.19. Merged late due to
having multiple dependencies
- Add sqe->cmd size checking for big SQEs, similar to what we have for
normal sized SQEs
- Fix a race condition in zcrx, that leads to a double free
* tag 'io_uring-20260221' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: Add size check for sqe->cmd
io_uring: add IORING_OP_URING_CMD128 to opcode checks
io_uring/zcrx: fix user_ref race between scrub and refill paths
phys_to_target_node() may assign a CXL Fixed Memory Window to the wrong NUMA
node when a CXL node resides in the gap of discontinuous System RAM node.
Fix this by checking both numa_meminfo and numa_reserved_meminfo, preferring
the reserved NID when the address appears in both.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmmZi4oQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kR8xB/9Do5A06sOV7imvZJH/NZAQ8PbOuo3Ig8I0
XaBhsuq0VrfGEPuVE16DrHrpYSfO0aC1IM9UxUHqvNG9IJluioYhz/bYLatWyzJq
oj7cvQ+5q0sAr3EK7vnumKlP6U4jkMkBFhr2nEdw0yKVi2J0SXFY16FNXCefXzbO
kYG3agtccuSb3A7iDmXypbRZ9YkI69pq6xl+mnGU3qIrO6yicmZNJaoksPo6e7Fp
ycPb2/z6r8to5kygCv6oU+zgIjRkGoDp/71WkGPze0HcG3Xx2+eOQxYzc7RF1OQ8
HYa4bAeILHVUStmOs5KdgJorJDaiij07XlaO+xevqFIN9cMFRszw
=I0W0
-----END PGP SIGNATURE-----
Merge tag 'fixes-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix detection of NUMA node for CXL windows
phys_to_target_node() may assign a CXL Fixed Memory Window to the
wrong NUMA node when a CXL node resides in the gap of discontinuous
System RAM node.
Fix this by checking both numa_meminfo and numa_reserved_meminfo,
preferring the reserved NID when the address appears in both"
* tag 'fixes-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: numa_memblks: Identify the accurate NUMA ID of CFMW
- Various bug fixes for the example schedulers and selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaZkltg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGR+3AQC2h+P8tZXpQ3tzNRgQ10KvekO+uetee4d3vb4O
db5FDwEAh5Binq/tRSzLm7XEb/YmmP2XmHmhmnbRQL69dzMt5gM=
=agf0
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Various bug fixes for the example schedulers and selftests
* tag 'sched_ext-for-7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: fix getopt not re-parsed on restart
tools/sched_ext: scx_userland: fix data races on shared counters
tools/sched_ext: scx_pair: fix stride == 0 crash on single-CPU systems
tools/sched_ext: scx_central: fix CPU_SET and skeleton leak on early exit
tools/sched_ext: scx_userland: fix stale data on restart
tools/sched_ext: scx_flatcg: fix potential stack overflow from VLA in fcg_read_stats
selftests/sched_ext: Fix rt_stall flaky failure
tools/sched_ext: scx_userland: fix restart and stats thread lifecycle bugs
tools/sched_ext: scx_central: fix sched_setaffinity() call with the set size
tools/sched_ext: scx_flatcg: zero-initialize stats counter array
-----BEGIN PGP SIGNATURE-----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=UcGf
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Two small fixes:
- fix potential deadlock
- minor cleanup"
* tag 'v7.0-rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: call ksmbd_vfs_kern_path_end_removing() on some error paths
smb: server: Remove duplicate include of misc.h
