Commit graph

254,637 commits

Author SHA1 Message Date
Linus Torvalds
002e473d1c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits)
  ipheth: remove incorrect devtype to WWAN
  MAINTAINERS: Add CAIF
  sctp: fix test for end of loop
  KS8851: Correct RX packet allocation
  udp: add rehash on connect()
  net: blackhole route should always be recalculated
  ipv4: Suppress lockdep-RCU false positive in FIB trie (3)
  niu: Fix kernel buffer overflow for ETHTOOL_GRXCLSRLALL
  ipvs: fix active FTP
  gro: Re-fix different skb headrooms
  via-velocity: Turn scatter-gather support back off.
  ipv4: Fix reverse path filtering with multipath routing.
  UNIX: Do not loop forever at unix_autobind().
  PATCH: b44 Handle RX FIFO overflow better (simplified)
  irda: off by one
  3c59x: Fix deadlock in vortex_error()
  netfilter: discard overlapping IPv6 fragment
  ipv6: discard overlapping fragment
  net: fix tx queue selection for bridged devices implementing select_queue
  bonding: Fix jiffies overflow problems (again)
  ...

Fix up trivial conflicts due to the same cgroup API thinko fix going
through both Andrew and the networking tree.  However, there were small
differences between the two, with Andrew's version generally being the
nicer one, and the one I merged first. So pick that one.

Conflicts in: include/linux/cgroup.h and kernel/cgroup.c
2010-09-11 08:06:38 -07:00
Linus Torvalds
10d90f2803 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Kill all BKL usage.
2010-09-11 08:01:09 -07:00
Linus Torvalds
aad1830e6b Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, tsc: Fix a preemption leak in restore_sched_clock_state()
  sched: Move sched_avg_update() to update_cpu_load()
2010-09-11 07:59:49 -07:00
Seungwhan Youn
29f9e39a55 ASoC: S3C: Fix PCM TXFIFO_DIPSTICK value
This patch modify FIFO_DIPSTICK value of PCM TX FIFO to be a optimal one.
Privious value (0x20) did not support 'Almost_full' of PCM FIFO for the DMA
request.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11 12:12:43 +01:00
Seungwhan Youn
0cca901252 ASoC: S3C: Fix PCM RX FIFO settings
When PCM capture, sound recorded abnormally because of RX FIFO
threshold settings are missing. So, This patch modify PCM RX FIFO
setting codes same as TX.
And for DMA, if PCM RXFIFO_DIPSTICK is not '0', it doesn't effect
to DMA request, because DMA refer RX_FIFO_EMPTY flag as the DMA
request.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11 12:12:20 +01:00
Chris Wilson
4ed765f966 drm/i915: Tidy Ironlake watermark computation
Refactor the common code into seperate functions and use the MIN(large,
small) buffer calculation for self-refresh watermarks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-11 10:59:57 +01:00
Chris Wilson
bed4a6734b drm/i915: Fix updating FBC
We need to track different state on each generation in order to detect
when we need to refresh the FBC registers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-11 10:50:55 +01:00
Jesse Barnes
ea056c14a2 drm/i915: enable thermal reporting for IPS
Thermal reporting may not be enabled by default on some machines, so
enable the appropriate bits to allow IPS to get the data it needs from
the CPU thermal device.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-11 10:49:34 +01:00
Dimitris Papastamos
6946e037ee ASoC: Fix off-by-one bug in WM8962 register cache size configuration
This is a simple off-by-one bug, the size of the register cache is
incorrectly set to the maximum register index. Fix it by adding one.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11 10:45:00 +01:00
Chris Wilson
8b3016c4f4 Merge branch 'drm-intel-fixes' into drm-intel-next 2010-09-11 09:49:58 +01:00
Yinghai Lu
823108a056 powerpc, memblock: Fix memblock API change fallout
Fix memblock API change fallout in the WII code.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: linux-mm@kvack.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <4C8B2AFA.2000705@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-11 10:30:28 +02:00
Michal Simek
da5ab11cdf memblock, microblaze: Fix memblock API change fallout
Adopt Microblaze to the memblock API changes, to fix this
build failure:

  CC      arch/microblaze/mm/init.o
 arch/microblaze/mm/init.c: In function 'mm_cmdline_setup':
 arch/microblaze/mm/init.c:236: error: 'struct memblock_type' has no member named 'region'
 ...

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: linux-mm@kvack.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <4C8B2A9A.1040303@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-11 10:30:28 +02:00
Matti J. Aaltonen
2c4ee9b579 ASoC: WL1273 FM Radio: Eliminate unnecessary error return value.
With this change it's not a error to call wl1273_set_audio_route
when the codec is active if the new routing value is the same
as the current active setting.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-11 09:03:21 +01:00
Jarkko Nikula
c23fd751dc ASoC: tlv320aic3x: Optimize PLL programming in aic3x_set_bias_level
There is only need to enable/disable once the PLL when the bias is going
between on, prepare, standby and off states.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-11 09:03:20 +01:00
Peter Zijlstra
55496c896b x86, tsc: Fix a preemption leak in restore_sched_clock_state()
Doh, a real life genuine preemption leak..

This caused a suspend failure.

Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Nico Schottelius <nico-linux-20100709@schottelius.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Pritz <flo@xssn.at>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org> # Greg, please apply after: cd7240c ("x86, tsc, sched: Recompute cyc2ns_offset's during resume from")
sleep states
LKML-Reference: <1284150773.402.122.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-11 09:47:07 +02:00
Linus Torvalds
3e6dce76d9 Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: don't enable self-refresh on Ironlake
  drm/i915: Double check that the wait_request is not pending before warning
  Revert "drm/i915: Warn if we run out of FIFO space for a mode"
  Revert "drm/i915: Allow LVDS on pipe A on gen4+"
  Revert "drm/i915: Enable RC6 on Ironlake."
2010-09-10 18:19:43 -07:00
Linus Torvalds
fbc1487019 Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: log IO completion workqueue is a high priority queue
  xfs: prevent reading uninitialized stack memory
2010-09-10 18:19:26 -07:00
Peter Zijlstra
5ee5e97ee9 x86, tsc: Fix a preemption leak in restore_sched_clock_state()
A real life genuine preemption leak..

Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-10 18:17:45 -07:00
Venkatesh Pallipadi
351e5a703a x86, mtrr: Support mtrr lookup for range spanning across MTRR range
mtrr_type_lookup [start:end] looked up the resultant MTRR type for that
range, based on fixed and all variable MTRR ranges. It did check for multiple
MTRR var ranges overlapping [start:end] and returned the net type.

However, if the [start:end] range spanned across any var MTRR range,
mtrr_type_lookup would return an error return of 0xFE. This was based on
typical usage of mtrr_type_lookup in PAT mapping, where region being
mapped would not normally span across MTRR ranges and also trying
to keep the code simple.

Mark recently reported the problem with this limitation. When there are
two continguous MTRR's of type "writeback" and if there is a memory mapping
over a region starting in one MTRR range and ending in another MTRR range,
such mapping will fallback to "uncached" due to the above limitation.

Change below adds support for such lookups spanning multiple MTRR ranges.
We now have a wrapper mtrr_type_lookup that dynamically splits such a region
into smaller chunks that fit within one MTRR range and does a
__mtrr_type_lookup on it and combine the results later.

Reported-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <1284159350-19841-3-git-send-email-venki@google.com>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-10 16:11:20 -07:00
Venkatesh Pallipadi
a7f07cfbaa x86, mtrr: Refactor MTRR type overlap check code
Move the MTRR type overlap check into a new function. No functional change in
this patch. Just making it easier to add multiple region overlap check in
the following patch.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <1284159350-19841-2-git-send-email-venki@google.com>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-10 16:11:10 -07:00
mark gross
0109c2c48d PM QoS: Correct pr_debug() misuse and improve parameter checks
Correct some pr_debug() misuse and add a stronger parameter check to
pm_qos_write() for the ASCII hex value case.  Thanks to Dan Carpenter
for pointing out the problem!

Signed-off-by: mark gross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-09-11 00:53:05 +02:00
Chris Wilson
021357acc8 drm/i915: Use the real FDI frequency for determining b/w
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 23:13:51 +01:00
Chris Wilson
8c4223bee9 drm/i915: Only call udelay() when waiting for clocks to stabilise
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 23:13:51 +01:00
Chris Wilson
d5e0d2f519 drm/i915: Ensure all PLL registers are flushed before a udelay()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 23:13:50 +01:00
Jesse Barnes
c64e311e65 drm/i915: set FDI RX TU size to match transmit size
This allows FDI error checking to work.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 23:13:49 +01:00
Jesse Barnes
de9c27bf70 drm/i915: don't write TU size to N1 reg
TU size is only part of the M1 and M2 regs, not the N regs.  This keeps
us from overwriting a reserved field.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 23:13:48 +01:00
Jesse Barnes
0e23b99d25 drm/i915: split Ironlake FDI enable function
Easier to read, and will pair up with a disable function.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 23:13:48 +01:00
Jesse Barnes
c98e9dcf90 drm/i915: enable PCH PLL, FDI training and transcoder even for eDP
eDP panels require these to be set up prior to panel power sequencing,
or they'll fail to power on due to an "asset not ready" check.  And of
course, eDP panels attached to anything other than DP_A need them
enabled regardless, since they'll be driven from the CPU through FDI out
to the PCH.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 23:13:47 +01:00
Jesse Barnes
7e7d76c306 drm/i915: use i915 and Ironlake CRTC enable/disable functions in prepare/commit
This will allow us to optimize our prepare/commit paths a bit better.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[ickle: minor tweak to handle the cursor across pipe resizing]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 23:12:55 +01:00
Jesse Barnes
4d12fe0b48 drm/i915: don't unlock panel regs
This was just a workaround for some broken Ironlake CRTC code.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 22:23:45 +01:00
Jesse Barnes
0b8765c6e7 drm/i915: split i9xx CRTC enable/disable code
So we can use it for CRTC prepare/commit.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 22:23:45 +01:00
Jesse Barnes
6be4a6078e drm/i915: split Ironlake CRTC enable/disable code
This way we can also use it in CRTC prepare/commit.  Also makes it
easier to split out FDI and other code.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-10 22:23:44 +01:00
Dimitris Papastamos
e5eec34c68 ASoC: Fix incorrect register cache size configuration
The reg_cache_size is the number of elements in the register cache,
not the size of the cache itself. This is not a problem if the size
of each element of the cache is 1 byte but it matters in any other
case.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10 22:21:23 +01:00
stephen hemminger
9ca7f87622 pkt_sched: remov unnecessary bh_disable
Now that est_tree_lock is acquired with BH protection, the other
call is unnecessary.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:47:59 -07:00
Eric Dumazet
a034ee3cca fib: cleanups
Use rcu_dereference_rtnl() helper

Change hard coded constants in fib_flag_trans()
 7 -> RTN_UNREACHABLE
 8 -> RTN_PROHIBIT

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:32:02 -07:00
Anatolij Gustschin
e39d5ef678 powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios
The GPIO controller of MPC512x is slightly different from
8xxx GPIO controllers. The register interface is the same
except the external interrupt control register. The MPC512x
GPIO controller differentiates between four interrupt event
types and therefore provides two interrupt control registers,
GPICR1 and GPICR2. GPIO[0:15] interrupt event types are
configured in GPICR1 register, GPIO[16:31] - in GPICR2 register.

This patch adds MPC512x speciffic set_type() callback and
updates config file and comments. Additionally the gpio chip
registration function is changed to use for_each_matching_node()
preventing multiple registration if a node claimes compatibility
with another gpio controller type.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-10 13:31:16 -06:00
Ben Hutchings
4642610c77 sfc: Allow changing the DMA ring sizes dynamically via ethtool
This requires some reorganisation of channel setup and teardown to
ensure that we can always roll-back a failed change.

Based on work by Steve Hodgson <shodgson@solarflare.com>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:34 -07:00
Steve Hodgson
ecc910f520 sfc: Make the dmaq size a run-time setting (rather than compile-time)
- Allow the ring size to be specified in non
   power-of-two sizes (for instance to limit
   the amount of receive buffers).
 - Automatically size the event queue.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:33 -07:00
Ben Hutchings
8313aca38b sfc: Allocate each channel separately, along with its RX and TX queues
This will allow for reallocation of channel structures and rings.

Change module parameter separate_tx_channels to be read-only, since we
now require its value to be constant.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:33 -07:00
Ben Hutchings
f7d12cdcbb sfc: Refactor channel and queue lookup and iteration
In preparation for changes to the way channels and queue structures
are allocated, revise the macros and functions used to look up and
iterator over them.

- Replace efx_for_each_tx_queue() with iteration over channels then TX
  queues
- Replace efx_for_each_rx_queue() with iteration over channels then RX
  queues (with one exception, shortly to be removed)
- Introduce efx_get_{channel,rx_queue,tx_queue}() functions to look up
  channels and queues by index
- Introduce efx_channel_get_{rx,tx}_queue() functions to look up a
  channel's queues

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:32 -07:00
Ben Hutchings
ba1e8a35b7 sfc: Abstract channel and index lookup for RX queues
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:32 -07:00
Ben Hutchings
58758aa505 sfc: Allocate DMA and event rings using GFP_KERNEL
Currently we allocate DMA descriptor rings and event rings using
pci_alloc_consistent() which selects non-blocking behaviour from the
page allocator (GFP_ATOMIC). This is unnecessary, and since we
currently allocate a single contiguous block for each ring (up to 32
pages!) these allocations are likely to fail if there is any
significant memory pressure.  Use dma_alloc_coherent() and GFP_KERNEL
instead.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:31 -07:00
Ben Hutchings
e42de26249 sfc: Fix failure paths in efx_probe_port()
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:30 -07:00
Ben Hutchings
7db8e8ec39 sfc: Remove declarations of functions that no longer exist
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:30 -07:00
Ben Hutchings
80485d3441 sfc: Accumulate RX_NODESC_DROP count in rx_dropped, not rx_over_errors
rx_over_errors appears to be intended as a count of packets that
overflow a packet buffer in the NIC.  Given that we implement a
cut-through receive path, this should always be 0.

rx_dropped appears to be the correct counter for packets dropped due
to lack of host buffers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:29 -07:00
Ben Hutchings
1cdc2cfc8a sfc: Use MCDI RX_BAD_FCS_PKTS count as MAC rx_bad count
Calculating rx_bad as rx_packets - rx_good is unnecessary and
incorrect, since rx_good does not include control frames (e.g.
pause frames) and rx_packets does.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10 12:27:29 -07:00
Christof Schmitt
175b79f063 zfcp: Report scatter gather limit for DIX protection information
When sending DIX integrity segments with an I/O request, the
restriction for the maximum number of segments is still the same for
the zfcp hardware. Report the new sg_prot_tablesize for the SCSI host,
so that the number of integrity segments plus the number of data
segments is not larger than the hardware limit. This results in using
half of the hardware segments for integrity data and the other half
for regular data.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10 20:50:40 +02:00
Martin K. Petersen
13f05c8d8e block/scsi: Provide a limit on the number of integrity segments
Some controllers have a hardware limit on the number of protection
information scatter-gather list segments they can handle.

Introduce a max_integrity_segments limit in the block layer and provide
a new scsi_host_template setting that allows HBA drivers to provide a
value suitable for the hardware.

Add support for honoring the integrity segment limit when merging both
bios and requests.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10 20:50:10 +02:00
Martin K. Petersen
c8bf133682 Consolidate min_not_zero
We have several users of min_not_zero, each of them using their own
definition.  Move the define to kernel.h.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10 20:07:38 +02:00
Tristan Ye
228ac63577 Ocfs2: Handle empty list in lockres_seq_start() for dlmdebug.c
This patch tries to handle the case in which list 'dlm->tracking_list' is
empty, to avoid accessing an invalid pointer. It fixes the following oops:

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1287

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10 09:19:30 -07:00