The power requirements for the CDSP instances on SC8280XP aren't fully
described, with only one of the three present. Fix that.
Fixes: ee651cd1e9 ("dt-bindings: remoteproc: qcom: pas: Add sc8280xp adsp and nsp pair")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251104-topic-8280_mxc-v1-2-df545af0ef94@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075445.3221481-1-sakari.ailus@linux.intel.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the newly added of_reserved_mem_region_to_resource() and
of_reserved_mem_region_count() functions to handle "memory-region"
properties.
The error handling is a bit different in some cases. Often
"memory-region" is optional, so failed lookup is not an error. But then
an error in of_reserved_mem_lookup() is treated as an error. However,
that distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251124182751.507624-2-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MSM8974 requires the CX power domain, so use the msm8996_adsp_resource
which has cx under proxy_pd_names and is otherwise equivalent.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250621-msm8974-rpmpd-switch-v1-2-0a2cb303c446@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Using CX as a regulator is an artifact of earlier times. Instead use CX
power rail as power domain from rpmpd.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250621-msm8974-rpmpd-switch-v1-1-0a2cb303c446@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the newly added of_reserved_mem_region_to_resource() and
of_reserved_mem_region_count() functions to handle "memory-region"
properties.
The error handling is a bit different in some cases. Often
"memory-region" is optional, so failed lookup is not an error. But then
an error in of_reserved_mem_lookup() is treated as an error. However,
that distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Tested-by: Peng Fan <peng.fan@nxp.com> # i.MX93-11x11-EVK for imx_rproc.c
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # rcar
Tested-by: Beleswar Padhi <b-padhi@ti.com> # TI
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251124182751.507624-1-robh@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Replace goto-based error handling with early return pattern in
imx_dsp_rproc_{start,stop}() functions, and simplify if-else logic.
No functional changes, only code structure improvements for better
maintainability.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-12-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There is no user of enum imx_rproc_method after moved to ops based
method. Remove it.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-11-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_reset_ctr_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_RESET_CONTROLLER to manage
remote processors.
Allows the removal of the IMX_RPROC_RESET_CONTROLLER switch-case blocks
from imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and
more maintainable code.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-10-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_scu_api_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_SCU_API to manage remote
processors.
Allows the removal of the IMX_RPROC_SCU_API switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-9-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_mmio_{start, stop, detect_mode}() helper functions
for i.MX variants using IMX_RPROC_MMIO to manage remote processors.
Allows the removal of the IMX_RPROC_MMIO switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.
No functional changes.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-8-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Move the imx_dsp_rproc_dcfg structure definitions closer to
imx_dsp_rproc_of_match to prepare for adding start/stop/detect_mode ops for
each i.MX variant.
Avoids the need to declare function prototypes such as
'static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)' at the
beginning of the file, improving code organization and readability.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-7-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Allow each platform to provide its own implementation of start/stop/
detect_mode operations, and prepare to eliminate the need for multiple
switch-case statements.
Improve code readability and maintainability by encapsulating
platform-specific behavior.
No functional changes.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-6-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Drop extra space between return and zero.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-5-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use dev_err_probe() to simplify the code. No functional change.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-4-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Current code on the cleanup path just disables runtime PM for a device.
Using resource managed version devm_pm_runtime_enable() registers a cleanup
callback that sets autosuspend to false and then disables runtime PM for
a device. So, basically the same functionality as we don't use autosuspend
anyway.
As a result, the .remove callback is no longer needed, reducing boilerplate
code.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-3-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Replace manual rproc_add() and cleanup logic with devm_rproc_add(), which
ties the remoteproc lifecycle to the device's lifecycle. This simplifies
error handling and ensures proper cleanup.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-2-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Refactor imx_dsp_attach_pm_domains() to use devm_pm_domain_attach_list()
directly, removing manual detach logic and simplifying resource management.
Also replace verbose error handling in imx_dsp_rproc_probe() with
dev_err_probe() for cleaner and more consistent error reporting.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-1-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The snprintf() calls here work but they have several minor style issues:
1) It uses ARRAY_SIZE() which is the number of elements in an array.
Since were talking about char that works, but it's more common to
use sizeof() which is the number of bytes.
2) The printf format is "%1d". The "1" ensures we always print at
least 1 character but since numbers all have at least 1 digit this
can be removed.
3) The kernel implementation of snprintf() cannot return negative error
codes. Also these particular calls to snprintf() can't return zero
and the code to handle that zero return is sort of questionable.
4) In the current kernel the only "core_id" we print is "0" but if it
was more than 9 then the output would be truncated so GCC complains.
Add an "a >= sizeof(scp_fw_file)" check for output which is too long.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/aP8agyKj73bLZrTQ@stanley.mountain
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Commit 086d08725d ("remoteproc: create vdev subdevice with specific dma
memory pool") added an export for rproc_va_to_pa. However, since its
introduction, this symbol has not been used by any loadable modules. It
remains only referenced within remoteproc_virtio.c, which is always built
together with remoteproc_core.c.
As such, exporting rproc_va_to_pa is unnecessary, so remove the export.
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20251016-rproc-cleanup-v3-v3-4-774083716e8a@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There is no user of crc32.h, debugfs.h, of_reserved_mem.h, virtio_ids.h,
so remove from the included headers.
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20251016-rproc-cleanup-v3-v3-3-774083716e8a@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reordered the header includes in drivers/remoteproc/remoteproc_core.c
to follow alphabetical order to simplify future maintenance.
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20251016-rproc-cleanup-v3-v3-2-774083716e8a@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The variable ret is immediately assigned the return value of
mutex_lock_interruptible(), making its prior initialization to zero
unnecessary. Remove the redundant assignment
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20251016-rproc-cleanup-v3-v3-1-774083716e8a@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
'method' is no longer used in imx_rproc.c, so remove the assignment.
But imx_dsp_rproc.c is still using 'method', so still keep the field
in struct imx_rrpoc_dcfg.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251024-imx_rproc_c4-v4-4-af83ed3fdbba@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PM runtime support is safe and applicable across all i.MX platforms, not
just those using the SCU API. Remove the conditional check and enable PM
runtime unconditionally to simplify the code and ensure consistent power
management behavior.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251024-imx_rproc_c4-v4-3-af83ed3fdbba@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Refactor the detach logic to support platform-specific implementations via
the dcfg->ops->detach callback. Allow finer control over detach behavior
depending on the remote processor management method, and make it easier
to add detach support for new SoCs.
The previous hardcoded SCU API detach logic is now moved into a dedicated
imx_rproc_scu_api_detach() function, and registered via the plat ops
structure. The generic imx_rproc_detach() now delegates to the
platform-specific handler if available.
Also, the dcfg->method check with IMX_RPROC_SCU_API is removed.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251024-imx_rproc_c4-v4-2-af83ed3fdbba@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Simplify the clock enable logic by removing the dedicated
imx_rproc_clk_enable() function and integrate the clock handling directly
into the probe function to simplify the code.
Add a new IMX_RPROC_NEED_CLKS flag in dcfg to indicate whether clock
management is required for a given SoC. Update probe logic to conditionally
enable clocks based on the new flag.
Set the flag for applicable SoCs (e.g., i.MX7D, i.MX8MQ, i.MX93, etc.).
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251024-imx_rproc_c4-v4-1-af83ed3fdbba@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
After a reply on the mailing lists [1] it emerged that the DT
property "firmware-name" should not be relied on because of
possible issues with firmware versions.
For MediaTek SCP, there has never been any firmware version vs
driver version desync issue but, regardless, the firmwares are
always using the same name and they're always located in a path
with a specific pattern.
Instead of unconditionally always relying on the firmware-name
devicetree property to get a path to the SCP FW file, drivers
should construct a name based on what firmware it knows and
what hardware it is running on.
In order to do that, add a `scp_get_default_fw_path()` function
that constructs the path and filename based on two of the infos
that the driver can get:
1. The compatible string with the highest priority (so, the
first one at index 0); and
2. The type of SCP HW - single-core or multi-core.
This means that the default firmware path is generated as:
- Single core SCP: mediatek/(soc_model)/scp.img
for example: mediatek/mt8183/scp.img;
- Multi core SCP: mediatek/(soc_model)/scp_c(core_number).img
for example: mediatek/mt8188/scp_c0.img for Core 0, and
mediatek/mt8188/scp_c1.img for Core 1.
Note that the generated firmware path is being used only if the
"firmware-name" devicetree property is not present in the SCP
node or in the SCP Core node(s).
[1 - Reply regarding firmware-name property]
Link: https://lore.kernel.org/all/7e8718b0-df78-44a6-a102-89529d6abcce@app.fastmail.com/
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251015084103.10737-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Replace manual rproc_add() and cleanup logic with devm_rproc_add(), which
ties the remoteproc lifecycle to the device's lifecycle. This simplifies
error handling and ensures proper cleanup.
With no need to invoke rproc_del(), the remove() ops could be removed.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-6-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Replace the explicit call to imx_rproc_put_scu() in the remove path with
devm_add_action_or_reset(). Ensure proper cleanup of scu resources and
simplify the code by leveraging the device-managed resource framework.
Additionally:
- Remove the IMX_RPROC_SCU_API check from imx_rproc_put_scu(), as
devm_add_action_or_reset() now exclusively handles SCU cleanup.
- Improve error reporting by using dev_err_probe() for consistency and
clarity.
- Drop the err_put_scu label, as it is now redundant due to the updated
error handling approach.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-5-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Replace separate calls to devm_clk_get() and clk_prepare_enable() with
devm_clk_get_enabled(), which combines clock acquisition and enabling
into a single managed step. Simplify the probe logic and remove the need
for manual clock disable in error and remove paths.
Also, update error handling to eliminate redundant cleanup steps and use
return-based error propagation where appropriate. Improve code clarity and
reduce the chance of resource leaks or incorrect ordering in cleanup paths.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-4-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Convert imx_rproc_free_mbox() to a devm-managed cleanup action using
devm_add_action_or_reset(). Ensure the mailbox resources are freed
automatically with the device lifecycle, simplify error handling and
removing the need for manual cleanup in probe and remove paths.
Also improve error reporting by using dev_err_probe() for consistency and
clarity.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-3-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Replace manual destroy_workqueue() calls in error and remove paths with a
devm_add_action_or_reset() helper. Ensure the workqueue is properly
cleaned up with the device lifecycle, and simplify error handling in probe
by removing now-unnecessary labels and cleanup steps.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-2-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Proper cleanup should be done when rproc_add() fails by invoking both
pm_runtime_disable() and pm_runtime_put_noidle() to avoid leaving the
device in an inconsistent power state.
Fix it by adding pm_runtime_put_noidle() and pm_runtime_disable()
in the error path.
Also Update the remove() callback to use pm_runtime_put_noidle() instead of
pm_runtime_put(), to clearly indicate that only need to restore the usage
count.
Fixes: a876a3aacc ("remoteproc: imx_rproc: detect and attach to pre-booted remote cores")
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Hiago De Franco <hiago.franco@toradex.com>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-1-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next.
-----BEGIN PGP SIGNATURE-----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=b0xy
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
reserved and accessing reserved register space could result in undefined
behavior
- Fix a function's retval check in aspeed-scu-ic
-----BEGIN PGP SIGNATURE-----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=dVwm
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
The previous fix to trace_marker required updating trace_marker_raw
as well. The difference between trace_marker_raw from trace_marker
is that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings.
This is for applications that will read the raw data from the ring
buffer and get the data structures directly. It's a bit quicker than
using the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was needed for
both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly fixed
the trace_marker write function, but the trace_marker_raw file wasn't
fixed properly. The user space data was correctly written into the per CPU
buffer, but the code that wrote into the ring buffer still used the user
space pointer and not the per CPU buffer that had the user space data
already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(), another
issue appeared. As writes to the trace_marker_raw expects binary data, the
first entry is a 4 byte identifier. The entry structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the cnt
used also includes the entry->id portion. Allocating sizeof(*entry)
plus cnt is actually allocating 4 bytes more than what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy().
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaOq0fhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4HAQCNbFEDjzNNEueCWLOptC5YfeJgdvPB
399CzuFJl02ZOgD/flPJa1r+NaeYOBhe1BgpFF9FzB/SPXAXkXUGLM7WIgg=
=goks
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaOqyGgAKCRAdayaRccAa
lhIaAP4owzRbZv/KnwVgXt3IDlAN7tOJQyiNbuAOTTH9IewvhAEA24zfrlav7CQl
WSc0d/poWAdmQJc0T/bdQ71G69j6dgQ=
=ljuS
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window. The most important one is the
qla2xxx which reverts a conversion to fix flexible array member
warnings, that went up in this merge window but which turned out on
further testing to be causing data corruption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaOpnUhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUCFQEA1cADof79U9suDka2hAa2l7D4wJQ53qSj
R7CwarAVX2wA/3RaEHySnSk+ivyHRl5AOYlPrYsnBo1o2KUq1M6kfviM
=itgd
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled kernels
in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
-----BEGIN PGP SIGNATURE-----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=3Otb
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support for
various instruction mnemonics now that the minimum assembler version
supports them all
- The usual cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=dW6J
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
preserve vmalloc allocations across handover.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaOmDWAAKCRDdBJ7gKXxA
jh+MAQDUPBj3mFm238CXI5DC1gJ3ETe3NJjJvfzIjLs51c+dFgD+PUuvDA0GUtKH
LCl6T+HJXh2FgGn1F2Kl/0hwPtEvuA4=
=HYr7
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more updates from Andrew Morton:
"Just one series here - Mike Rappoport has taught KEXEC handover to
preserve vmalloc allocations across handover"
* tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/test_kho: use kho_preserve_vmalloc instead of storing addresses in fdt
kho: add support for preserving vmalloc allocations
kho: replace kho_preserve_phys() with kho_preserve_pages()
kho: check if kho is finalized in __kho_preserve_order()
MAINTAINERS, .mailmap: update Umang's email address
All singletons, please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaOmCTwAKCRDdBJ7gKXxA
jtQZAQC9sRd+4LNYothoXlY9avKNYR4YvN3ogiIFJqHwiENu/QD/ec/57KME9dA4
H4SqK/49Rs/tVCYmkPTO7IWRmxo9/AA=
=h9On
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. All 7 are cc:stable and all 7 are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hugetlb: avoid soft lockup when mprotect to large memory area
fsnotify: pass correct offset to fsnotify_mmap_perm()
mm/ksm: fix flag-dropping behavior in ksm_madvise
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
mm/rmap: fix soft-dirty and uffd-wp bit loss when remapping zero-filled mTHP subpage to shared zeropage
mm/thp: fix MTE tag mismatch when replacing zero-filled subpages
memcg: skip cgroup_file_notify if spinning is not allowed
