commit def33fb119 upstream.
All batches of the Pine64 Pinebook Pro, except the latest batch (as of 2024)
whose hardware design was revised due to the component shortage, use a 1S
lithium battery whose nominal/design capacity is 10,000 mAh, according to the
battery datasheet. [1][2] Let's correct the design full-charge value in the
Pinebook Pro board dts, to improve the accuracy of the hardware description,
and to hopefully improve the accuracy of the fuel gauge a bit on all units
that don't belong to the latest batch.
The above-mentioned latest batch uses a different 1S lithium battery with
a slightly lower capacity, more precisely 9,600 mAh. To make the fuel gauge
work reliably on the latest batch, a sample battery would need to be sent to
CellWise, to obtain its proprietary battery profile, whose data goes into
"cellwise,battery-profile" in the Pinebook Pro board dts. Without that data,
the fuel gauge reportedly works unreliably, so changing the design capacity
won't have any negative effects on the already unreliable operation of the
fuel gauge in the Pinebook Pros that belong to the latest batch.
According to the battery datasheet, its voltage can go as low as 2.75 V while
discharging, but it's better to leave the current 3.0 V value in the dts file,
because of the associated Pinebook Pro's voltage regulation issues.
[1] https://wiki.pine64.org/index.php/Pinebook_Pro#Battery
[2] https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%2010000mAh%E8%A7%84%E6%A0%BC%E4%B9%A6-14.pdf
Fixes: c7c4d698cd ("arm64: dts: rockchip: add fuel gauge to Pinebook Pro dts")
Cc: stable@vger.kernel.org
Cc: Marek Kraus <gamiee@pine64.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/731f8ef9b1a867bcc730d19ed277c8c0534c0842.1721065172.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c51521de1 upstream.
Increase the frequency of the PWM signal that drives the LED backlight of
the Pinebook Pro's panel, from about 1.35 KHz (which equals to the PWM
period of 740,740 ns), to exactly 8 kHz (which equals to the PWM period of
125,000 ns). Using a higher PWM frequency for the panel backlight, which
reduces the flicker, can only be beneficial to the end users' eyes.
On top of that, increasing the backlight PWM signal frequency reportedly
eliminates the buzzing emitted from the Pinebook Pro's built-in speakers
when certain backlight levels are set, which cause some weird interference
with some of the components of the Pinebook Pro's audio chain.
The old value for the backlight PWM period, i.e. 740,740 ns, is pretty much
an arbitrary value that was selected during the very early bring-up of the
Pinebook Pro, only because that value seemed to minimize horizontal line
distortion on the display, which resulted from the old X.org drivers causing
screen tearing when dragging windows around. That's no longer an issue, so
there are no reasons to stick with the old PWM period value.
The lower and the upper backlight PWM frequency limits for the Pinebook Pro's
panel, according to its datasheet, are 200 Hz and 10 kHz, respectively. [1]
These changes still leave some headroom, which may have some positive effects
on the lifetime expectancy of the panel's backlight LEDs.
[1] https://files.pine64.org/doc/datasheet/PinebookPro/NV140FHM-N49_Rev.P0_20160804_201710235838.pdf
Fixes: 5a65505a69 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Cc: stable@vger.kernel.org
Reported-by: Nikola Radojevic <nikola@radojevic.rs>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Nikola Radojević <nikola@radojevic.rs>
Link: https://lore.kernel.org/r/2a23b6cfd8c0513e5b233b4006ee3d3ed09b824f.1722805655.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db0d8a8434 upstream.
The ampere1a cpu is affected by erratum AC04_CPU_10 which is the same
bug as AC03_CPU_38. Add ampere1a to the AC03_CPU_38 workaround midr list.
Cc: <stable@vger.kernel.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827211701.2216719-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6db3eb6c3 upstream.
Add explicit casting to prevent expantion of 32th bit of
u32 into highest half of u64 in several places.
For example, in inject_abt64:
ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT = 0x24 << 26.
This operation's result is int with 1 in 32th bit.
While casting this value into u64 (esr is u64) 1
fills 32 highest bits.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: <stable@vger.kernel.org>
Fixes: aa8eff9bfb ("arm64: KVM: fault injection into a guest")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/stable/20240910085016.32120-1-abelova%40astralinux.ru
Link: https://lore.kernel.org/r/20240910085016.32120-1-abelova@astralinux.ru
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfe5c02654 upstream.
Some f2fs ioctl interfaces like f2fs_ioc_set_pin_file(),
f2fs_move_file_range(), and f2fs_defragment_range() missed to
check atomic_write status, which may cause potential race issue,
fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f5a100f87 upstream.
The F2FS ioctls for starting and committing atomic writes check for
inode_owner_or_capable(), but this does not give LSMs like SELinux or
Landlock an opportunity to deny the write access - if the caller's FSUID
matches the inode's UID, inode_owner_or_capable() immediately returns true.
There are scenarios where LSMs want to deny a process the ability to write
particular files, even files that the FSUID of the process owns; but this
can currently partially be bypassed using atomic write ioctls in two ways:
- F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can
truncate an inode to size 0
- F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert
changes another process concurrently made to a file
Fix it by requiring FMODE_WRITE for these operations, just like for
F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these
ioctls when intending to write into the file, that seems unlikely to break
anything.
Fixes: 88b88a6679 ("f2fs: support atomic writes")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50438dbc48 upstream.
While calculating the end addresses of main area and segment 0, u32
may be not enough to hold the result without the danger of int
overflow.
Just in case, play it safe and cast one of the operands to a
wider type (u64).
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: fd694733d5 ("f2fs: cover large section in sanity check of super")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47f268f33d upstream.
The result of multiplication between values derived from functions
dir_buckets() and bucket_blocks() *could* technically reach
2^30 * 2^2 = 2^32.
While unlikely to happen, it is prudent to ensure that it will not
lead to integer overflow. Thus, use mul_u32_u32() as it's more
appropriate to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3843154598 ("f2fs: introduce large directory support")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cade98cf6 upstream.
When dealing with large extents and calculating file offsets by
summing up according extent offsets and lengths of unsigned int type,
one may encounter possible integer overflow if the values are
big enough.
Prevent this from happening by expanding one of the addends to
(pgoff_t) type.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: d323d005ac ("f2fs: support file defragment")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3368597206 upstream.
Even in case of failure we could've discarded some data and userspace
should be made aware of it, so copy fstrim_range to userspace
regardless.
Also make sure to update the trimmed bytes amount even if
btrfs_trim_free_extents fails.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0b595e61d upstream.
[BUG]
There are some reports about invalid data backref objectids, the report
looks like this:
BTRFS critical (device sda): corrupt leaf: block=333654787489792 slot=110 extent bytenr=333413935558656 len=65536 invalid data ref objectid value 2543
The data ref objectid is the inode number inside the subvolume.
But in above case, the value is completely sane, not really showing the
problem.
[CAUSE]
The root cause of the problem is the deprecated feature, inode cache.
This feature results a special inode number, -12ULL, and it's no longer
recognized by tree-checker, triggering the error.
The direct problem here is the output of data ref objectid. The value
shown is in fact the dref_root (subvolume id), not the dref_objectid
(inode number).
[FIX]
Fix the output to use dref_objectid instead.
Reported-by: Neil Parton <njparton@gmail.com>
Reported-by: Archange <archange@archlinux.org>
Link: https://lore.kernel.org/linux-btrfs/CAAYHqBbrrgmh6UmW3ANbysJX9qG9Pbg3ZwnKsV=5mOpv_qix_Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/9541deea-9056-406e-be16-a996b549614d@archlinux.org/
Fixes: f333a3c7e8 ("btrfs: tree-checker: validate dref root and objectid")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 684d28feb8 upstream.
fill_pool() uses 'obj_pool_min_free' to decide whether objects should be
handed back to the kmem cache. But 'obj_pool_min_free' records the lowest
historical value of the number of objects in the object pool and not the
minimum number of objects which should be kept in the pool.
Use 'debug_objects_pool_min_level' instead, which holds the minimum number
which was scaled to the number of CPUs at boot time.
[ tglx: Massage change log ]
Fixes: d26bf5056f ("debugobjects: Reduce number of pool_lock acquisitions in fill_pool()")
Fixes: 36c4ead6f6 ("debugobjects: Add global free list and the counter")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240904133944.2124-3-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5acdc432f8 upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 0bb4e9187e ("mt76: mt7615: fix hwmon temp sensor mem use-after-free")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240905014753.353271-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a71ed5898d upstream.
"iw dev wlp2s0 station dump" shows incorrect rx bitrate:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 86.7 MBit/s VHT-MCS 9 VHT-NSS 1
This is because the RX band width is calculated incorrectly. Fix the
calculation according to the phydm_rxsc_2_bw() function from the
official drivers.
After:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1
It also works correctly with the AP configured for 20 MHz and 40 MHz.
Tested with RTL8822CE.
Cc: stable@vger.kernel.org
Fixes: e3037485c6 ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bca8949b-e2bd-4515-98fd-70d3049a0097@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0af8cd2822 upstream.
Remove VID/PID 0bda:c82c as it was inadvertently added to the device
list in driver rtw8821cu. This VID/PID is for the rtw8822cu device
and it is already in the appropriate place for that device.
Cc: stable@vger.kernel.org
Signed-off-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/335d7fa1-0ba5-4b86-bba5-f98834ace1f8@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f503ae90c7 upstream.
Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he
routine adding an sta interface to the mt7996 driver.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240813081242.3991814-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 267efeda8c upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7e ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014955.4145423-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ccc9e476c upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7e ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviwed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014455.4144536-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d92792a4b2 upstream.
pt_event_snapshot_aux() uses pt->handle_nmi to determine if tracing
needs to be stopped, however tracing can still be going because
pt->handle_nmi is set to zero before tracing is stopped in pt_event_stop,
whereas pt_event_snapshot_aux() requires that tracing must be stopped in
order to copy a sample of trace from the buffer.
Instead call pt_config_stop() always, which anyway checks config for
RTIT_CTL_TRACEEN and does nothing if it is already clear.
Note pt_event_snapshot_aux() can continue to use pt->handle_nmi to
determine if the trace needs to be restarted afterwards.
Fixes: 25e8920b30 ("perf/x86/intel/pt: Add sampling support")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240715160712.127117-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77d48d39e9 upstream.
The TPM event log table is a Linux specific construct, where the data
produced by the GetEventLog() boot service is cached in memory, and
passed on to the OS using an EFI configuration table.
The use of EFI_LOADER_DATA here results in the region being left
unreserved in the E820 memory map constructed by the EFI stub, and this
is the memory description that is passed on to the incoming kernel by
kexec, which is therefore unaware that the region should be reserved.
Even though the utility of the TPM2 event log after a kexec is
questionable, any corruption might send the parsing code off into the
weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY
instead, which is always treated as reserved by the E820 conversion
logic.
Cc: <stable@vger.kernel.org>
Reported-by: Breno Leitao <leitao@debian.org>
Tested-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a98cfe6ff1 upstream.
Internal documentation suggest that the TUXEDO Polaris 15 Gen5 AMD might
have GMxXGxX as the board name instead of GMxXGxx.
Adding both to be on the safe side.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240910094008.1601230-1-wse@tuxedocomputers.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bb1e7d027 upstream.
Only buffer objects are valid return values of _STR.
If something else is returned description_show() will access invalid
memory.
Fixes: d1efe3c324 ("ACPI: Add new sysfs interface to export device description")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-1-058ab0667fa8@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5e61b50c9 upstream.
If the net_conf pointer is NULL and the code attempts to access its
fields without a check, it will lead to a null pointer dereference.
Add a NULL check before dereferencing the pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 44ed167da7 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://lore.kernel.org/r/20240909133740.84297-1-m.lobanov@rosalinux.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f02b5af3a upstream.
The violation of atomicity occurs when the drbd_uuid_set_bm function is
executed simultaneously with modifying the value of
device->ldev->md.uuid[UI_BITMAP]. Consider a scenario where, while
device->ldev->md.uuid[UI_BITMAP] passes the validity check when its
value is not zero, the value of device->ldev->md.uuid[UI_BITMAP] is
written to zero. In this case, the check in drbd_uuid_set_bm might refer
to the old value of device->ldev->md.uuid[UI_BITMAP] (before locking),
which allows an invalid value to pass the validity check, resulting in
inconsistency.
To address this issue, it is recommended to include the data validity
check within the locked section of the function. This modification
ensures that the value of device->ldev->md.uuid[UI_BITMAP] does not
change during the validation process, thereby maintaining its integrity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations.
Fixes: 9f2247bb9b ("drbd: Protect accesses to the uuid set with a spinlock")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Link: https://lore.kernel.org/r/20240913083504.10549-1-chenqiuji666@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce3d2d6b15 upstream.
In case of sev PLATFORM_STATUS failure, sev_get_api_version() fails
resulting in sev_data field of psp_master nulled out. This later becomes
a problem when unloading the ccp module because the device has not been
unregistered (via misc_deregister()) before clearing the sev_data field
of psp_master. As a result, on reloading the ccp module, a duplicate
device issue is encountered as can be seen from the dmesg log below.
on reloading ccp module via modprobe ccp
Call Trace:
<TASK>
dump_stack_lvl+0xd7/0xf0
dump_stack+0x10/0x20
sysfs_warn_dup+0x5c/0x70
sysfs_create_dir_ns+0xbc/0xd
kobject_add_internal+0xb1/0x2f0
kobject_add+0x7a/0xe0
? srso_alias_return_thunk+0x5/0xfbef5
? get_device_parent+0xd4/0x1e0
? __pfx_klist_children_get+0x10/0x10
device_add+0x121/0x870
? srso_alias_return_thunk+0x5/0xfbef5
device_create_groups_vargs+0xdc/0x100
device_create_with_groups+0x3f/0x60
misc_register+0x13b/0x1c0
sev_dev_init+0x1d4/0x290 [ccp]
psp_dev_init+0x136/0x300 [ccp]
sp_init+0x6f/0x80 [ccp]
sp_pci_probe+0x2a6/0x310 [ccp]
? srso_alias_return_thunk+0x5/0xfbef5
local_pci_probe+0x4b/0xb0
work_for_cpu_fn+0x1a/0x30
process_one_work+0x203/0x600
worker_thread+0x19e/0x350
? __pfx_worker_thread+0x10/0x10
kthread+0xeb/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
kobject: kobject_add_internal failed for sev with -EEXIST, don't try to register things with the same name in the same directory.
ccp 0000:22:00.1: sev initialization failed
ccp 0000:22:00.1: psp initialization failed
ccp 0000:a2:00.1: no command queues available
ccp 0000:a2:00.1: psp enabled
Address this issue by unregistering the /dev/sev before clearing out
sev_data in case of PLATFORM_STATUS failure.
Fixes: 200664d523 ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Cc: stable@vger.kernel.org
Signed-off-by: Pavan Kumar Paluri <papaluri@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c80ee36ac8 upstream.
The qcom_geni_serial_poll_bit() can be used to wait for events like
command completion and is supposed to wait for the time it takes to
clear a full fifo before timing out.
As noted by Doug, the current implementation does not account for start,
stop and parity bits when determining the timeout. The helper also does
not currently account for the shift register and the two-word
intermediate transfer register.
A too short timeout can specifically lead to lost characters when
waiting for a transfer to complete as the transfer is cancelled on
timeout.
Instead of determining the poll timeout on every call, store the fifo
timeout when updating it in set_termios() and make sure to take the
shift and intermediate registers into account. Note that serial core has
already added a 20 ms margin to the fifo timeout.
Also note that the current uart_fifo_timeout() interface does
unnecessary calculations on every call and did not exist in earlier
kernels so only store its result once. This facilitates backports too as
earlier kernels can derive the timeout from uport->timeout, which has
since been removed.
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable@vger.kernel.org # 4.17
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f81dfa3b57 upstream.
PCI xHC host should be stopped and xhci driver memory freed before putting
host to PCI D3 state during PCI remove callback.
Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around
and set the host to D3 before calling usb_hcd_pci_remove(dev), which will
access the host to stop it, and then free xhci.
Fixes: f1f6d9a8b5 ("xhci: don't dereference a xhci member after removing xhci")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f16dd10ba3 upstream.
The write to RP2_GLOBAL_CMD followed by an immediate read of
RP2_GLOBAL_CMD in rp2_reset_asic() is intented to flush out the write,
however by then the device is already in reset and cannot respond to a
memory cycle access.
On platforms such as the Raspberry Pi 4 and others using the
pcie-brcmstb.c driver, any memory access to a device that cannot respond
is met with a fatal system error, rather than being substituted with all
1s as is usually the case on PC platforms.
Swapping the delay and the read ensures that the device has finished
resetting before we attempt to read from it.
Fixes: 7d9f49afa4 ("serial: rp2: New driver for Comtrol RocketPort 2 cards")
Cc: stable <stable@kernel.org>
Suggested-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240906225435.707837-1-florian.fainelli@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0e5311aa8 upstream.
Most firmware names are hardcoded strings, or are constructed from fairly
constrained format strings where the dynamic parts are just some hex
numbers or such.
However, there are a couple codepaths in the kernel where firmware file
names contain string components that are passed through from a device or
semi-privileged userspace; the ones I could find (not counting interfaces
that require root privileges) are:
- lpfc_sli4_request_firmware_update() seems to construct the firmware
filename from "ModelName", a string that was previously parsed out of
some descriptor ("Vital Product Data") in lpfc_fill_vpd()
- nfp_net_fw_find() seems to construct a firmware filename from a model
name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I
think parses some descriptor that was read from the device.
(But this case likely isn't exploitable because the format string looks
like "netronome/nic_%s", and there shouldn't be any *folders* starting
with "netronome/nic_". The previous case was different because there,
the "%s" is *at the start* of the format string.)
- module_flash_fw_schedule() is reachable from the
ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as
GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is
enough to pass the privilege check), and takes a userspace-provided
firmware name.
(But I think to reach this case, you need to have CAP_NET_ADMIN over a
network namespace that a special kind of ethernet device is mapped into,
so I think this is not a viable attack path in practice.)
Fix it by rejecting any firmware names containing ".." path components.
For what it's worth, I went looking and haven't found any USB device
drivers that use the firmware loader dangerously.
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Fixes: abb139e75c ("firmware: teach the kernel to load firmware files directly from the filesystem")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240828-firmware-traversal-v3-1-c76529c63b5f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfc5ca0fd1 upstream.
Add a mhi_pci_dev_info struct specific for the Telit FE990A modem in
order to use the correct product name.
Cc: stable@vger.kernel.org # 6.1+
Fixes: 0724869ede ("bus: mhi: host: pci_generic: add support for Telit FE990 modem")
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240820080439.837666-1-fabio.porcedda@gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c6b6afa59 upstream.
The dwc2_handle_usb_suspend_intr() function disables gadget clocks in USB
peripheral mode when no other power-down mode is available (introduced by
commit 0112b7ce68 ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")).
However, the dwc2_drd_role_sw_set() USB role update handler attempts to
read DWC2 registers if the USB role has changed while the USB is in suspend
mode (when the clocks are gated). This causes the system to hang.
Release the gadget clocks before handling the USB role update.
Fixes: 0112b7ce68 ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Marek <tomas.marek@elrest.cz>
Link: https://lore.kernel.org/r/20240906055025.25057-1-tomas.marek@elrest.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1702bec447 upstream.
Fix changes incorrect usb_request->status returned during disabling
endpoints. Before fix the status returned during dequeuing requests
while disabling endpoint was ECONNRESET.
Patch change it to ESHUTDOWN.
Patch fixes issue detected during testing UVC gadget.
During stopping streaming the class starts dequeuing usb requests and
controller driver returns the -ECONNRESET status. After completion
requests the class or application "uvc-gadget" try to queue this
request again. Changing this status to ESHUTDOWN cause that UVC assumes
that endpoint is disabled, or device is disconnected and stops
re-queuing usb requests.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538E8CA7A2096AAF6A3718FDD9E2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b41c1fa155 upstream.
TIOCGSERIAL is an ioctl. Thus it must be atomic. It returns
two values. Racing with set_serial it can return an inconsistent
result. The mutex must be taken.
In terms of logic the bug is as old as the driver. In terms of
code it goes back to the conversion to the get_serial and
set_serial methods.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Fixes: 99f75a1fcd ("cdc-acm: switch to ->[sg]et_serial()")
Link: https://lore.kernel.org/r/20240912141916.1044393-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8265d06b77 upstream.
There is a small window during probing when IO is running
but the backlight is not registered. Processing events
during that time will crash. The completion handler
needs to check for a backlight before scheduling work.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912123317.1026049-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09d3856794 upstream.
USB 3.0 on xhci1 is not used, as the controller shares the same PHY as
pcie1. The latter is enabled to support the M.2 PCIe WLAN card on this
design.
Mark USB 3.0 as disabled on this controller using the
"mediatek,u3p-dis-msk" property.
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> #KernelCI
Closes: https://lore.kernel.org/all/9fce9838-ef87-4d1b-b3df-63e1ddb0ec51@notapiano/
Fixes: b6267a396e ("arm64: dts: mediatek: cherry: Enable T-PHYs and USB XHCI controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240731034411.371178-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04e906839a upstream.
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faa2e484b3 upstream.
All USB devices supported by rtw88 have the same problem: they don't
transmit beacons in AP mode. (Some?) SDIO devices are also affected.
The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL
before uploading the beacon reserved page, so don't clear the bit for
USB and SDIO devices.
Tested with RTL8811CU and RTL8723DU.
Cc: <stable@vger.kernel.org> # 6.6.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/49de73b5-698f-4865-ab63-100e28dfc4a1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75b3189540 upstream.
Remove the CAN_CTRLMODE_3_SAMPLES announcement for CAN-USB/3-FD devices
because these devices don't support it.
The hardware has a Microchip SAM E70 microcontroller that uses a Bosch
MCAN IP core as CAN FD controller. But this MCAN core doesn't support
triple sampling.
Fixes: 80662d9430 ("can: esd_usb: Add support for esd CAN-USB/3")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20240904222740.2985864-2-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5551bc30e4 upstream.
SD cards can produce write latency spikes on the order of a hundred
milliseconds. If the target firmware does not hide that latency during DATA
IN and OUT phases it can cause the PDMA circuitry to raise a processor bus
fault which in turn leads to an unreliable byte count and a DMA overrun.
The Last Byte Sent flag is used to detect the overrun but this mechanism is
unreliable on some systems. Instead, set a DID_ERROR result whenever there
is a bus fault during a PDMA send, unless the cause was a phase mismatch.
Cc: stable@vger.kernel.org # 5.15+
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 7c1f3e3447 ("scsi: mac_scsi: Treat Last Byte Sent time-out as failure")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/cc38df687ace2c4ffc375a683b2502fc476b600d.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5545c3165c upstream.
Before the error handling can be revised, some preparation is needed.
Refactor the polling loop with a new function, macscsi_wait_for_drq().
This function will gain more call sites in the next patch.
Cc: stable@vger.kernel.org # 5.15+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/6a5ffabb4290c0d138c6d285fda8fa3902e926f0.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ec4f820cb upstream.
After a bus fault, capture and log the chip registers immediately, if the
NDEBUG_PSEUDO_DMA macro is defined. Remove some printk(KERN_DEBUG ...)
messages that aren't needed any more. Don't skip the debug message when
bytes == 0. Show all of the byte counters in the debug messages.
Cc: stable@vger.kernel.org # 5.15+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/7573c79f4e488fc00af2b8a191e257ca945e0409.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c40f079f1 upstream.
Commit 8db8f6ce55 ("scsi: ufs: qcom: Add missing interconnect bandwidth
values for Gear 5") updated the ufs_qcom_bw_table for Gear 5. However, it
missed updating the cfg_bw value for the max mode.
Hence update the cfg_bw value for the max mode for UFS 4.x devices.
Fixes: 8db8f6ce55 ("scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Link: https://lore.kernel.org/r/20240903063709.4335-1-quic_mapa@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f81eaf0838 upstream.
Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for
example), sd_read_block_characteristics() may attempt an out-of-bounds
memory access when accessing the zoned field at offset 8.
Fixes: 7fb019c46e ("scsi: sd: Switch to using scsi_device VPD pages")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20240912134308.282824-1-mwilck@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e9a2990a9 upstream.
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes: 673b2fe6ff ("scsi: ata: libata-scsi: Add support for CDL pages mode sense")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
