Use arrays instead of list for userq_vas since we have fixed no
of bos. Also, we dont have to worry to free that memory later
since this array would be free along with queue only.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mqd_destroy cleans up queue core objects like mqd and fw_object
which are needed for any pending fence to signal properly.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_queue_ids() computes array_size = num_queues * sizeof(uint32_t),
which could overflow on 32-bit size_t build. using array_size()
instead, it saturates to SIZE_MAX on overflow.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few cases that code walks up the topology to find the
link partner of the integrated switch in a dGPU. Split this out
to a helper and call in all places.
This does have a functional change that amdgpu_device_gpu_bandwidth()
doesn't cache the internal link but only the parent.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the amdgpu_userq_create/destroy_object wrappers and
use directly the kernel bo allocation function which does all the
things which are done in wrapper.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The guest maps the PF response in shared VRAM (struct ras_cmd_ctx in the
command buffer). After amdgpu_virt_send_remote_ras_cmd() returns, the code
validated rcmd->output_size against the caller buffer, then copied
rcmd->output_buff_raw using rcmd->output_size again. A malicious PF could
change output_size between those reads so the memcpy length exceeds the
caller’s output_size and overflows guest stack or heap buffers.
Snapshot output_size with READ_ONCE() once, assign cmd->output_size from
that value, and use the same snapshot for the bounds check and memcpy.
Also read cmd_res once with READ_ONCE() so the error branch and
cmd->cmd_res assignment do not observe different values from shared memory.
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VF copies a PF-provided CPER telemetry blob and walks records using
cper_dump->count and each entry's record_length. count is u64 while the
loop used u32, so a large count could loop indefinitely. record_length was
not limited to the kmemdup'd region, so the first iteration could read far
past the allocation; record_length == 0 could spin forever on the same
entry. Together that allowed a malicious hypervisor to leak heap past the
blob into the CPER ring or hang the guest.
Require used_size to cover the fixed header before buf and stay within the
telemetry cap. Track remaining bytes in buf, cap iterations with u64 and
CPER_MAX_ALLOWED_COUNT, and reject record_length outside
[sizeof(cper_hdr), remaining] before writing to the ring.
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are some platforms that don't have a dedicated
GPIO line to manage the AC/DC switch. In this case,
the SI SMC automatically notices when switching to DC,
but needs to be notified when switching to AC.
Fixup and use si_notify_hw_of_powersource() which was
previously hidden behind an "#if 0".
This fixes some SI laptop GPUs to be able to use their
performance power states after switching from DC to AC.
Some affected GPUs are:
FirePro W4170M - Dell Precision M2800
Radeon HD 8790M - Dell Latitude E6540
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Co-developed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VBIOS can contain conflicting values between:
- the maximum allowed clocks and voltages on AC or DC
- the clocks and voltages in power states on AC or DC
Update maximum clock (and voltage) limits for both AC/DC
and take the highest value from the VBIOS limits and
the performance/battery power states. Previously this
was only done for AC, but is also needed for DC.
This commit fixes the behaviour on some laptop GPUs,
where the VBIOS limit was set to the lowest possible
clock frequency, so the GPU was stuck on the lowest
possible power level on battery.
Some affected GPUs are:
FirePro W4170M (Dell Precision M2800)
Radeon HD 8790M (Dell Latitude E6540)
and possibly other laptop GPUs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Co-developed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ATOM_PP_PLATFORM_CAP_HARDWAREDC is set,
the SMU has a GPIO pin for detecting AC/DC switch
and everything works automatically.
Otherwise when there is no GPIO pin, the SMU can
automatically detect switching to DC, but needs
to be notified of switching to AC.
Use PPSMC_MSG_RunningOnAC to notify the SMC
when switching to AC.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional changes, just change the name of this
function pointer to be more generic.
BAPM refers to a specific feature on KV, but other kinds of
ASICs may also need the SMU to be notified on AC/DC changes.
Also remove the argument and use adev->pm.ac_power instead.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When no displays are connected, there is no vblank
happening so the power management code shouldn't
worry about it.
This fixes a regression that caused the memory clock
to be stuck at maximum when there were no displays
connected to a SI GPU.
Fixes: 9003a07468 ("drm/amd/pm: Treat zero vblank time as too short in si_dpm (v3)")
Fixes: 9d73b107a6 ("drm/amd/pm: Use pm_display_cfg in legacy DPM (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used and not needed anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was not used by anything anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function was effectively a no-op because it always
returned the maximum possible power level, because the
maximum voltage is in millivolts while the dependency
table didn't contain actual voltages.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These implementations did not actually return
the DAL power level, so they were effectively
a no-op.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was not called from anywhere.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It isn't used by anything anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only DCE 11.0 relies on this information and even that
didn't use this field, because it queries the information
from the pplib. It also filled the field incorrectly on
that version.
On newer GPUs, the VIOS integrated info no longer contains
display clock voltage dependencies, so we don't need it.
v2:
- Also delete some code wrapped in #if 0
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was not used by anything anymore.
Note that the parts of DC that need this information actually
already query it from the pplib and don't use the hardcoded
information from max_clks_by_state.
v2:
- Also delete state_dependent_clocks
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The max_clks_by_state was based on hardcoded values, which are
not really used anywhere, only to know the maximum clock.
Just hardcode the same maximum clock for each DCE version.
v2:
- Use previous max display clock for DCE 11.2
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not used by anything anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These fields are not used by anything anymore.
v2:
- Delete dm_pp_get_static_clocks()
- Delete pp_to_dc_powerlevel_state()
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is not called from anywhere anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CRIU restore ioctls are meant to be called by CRIU with no
existing drm file. There's an error path
for if the drm file unexpectedly exists. It was positioned so
it was missing a fput(drm_file).
Do that check earlier, as soon as we have the pdd.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use snprintf() with sizeof(fs_info.debugfs_name) so a long RAS block
name plus the "_err_inject" suffix cannot overflow the 32-byte buffer.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thread 1: Running amdgpu_userq_destroy which eventually remove
the queue from door bell and set userq_mgr = NULL.
Thread2: An interrupt might have scheduled the hang_detect_work
which still need userq_mgr to be valid but could get an NULL
ptrs.
To fix that make sure we cancel the hang_detect_work again before
setting userq_mgr to NULL.
Along with that we also need all the queue va to remain valid till
we could be running anything on the queue and hence moving the
userq_va post hang_detect handler is cancelled.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the code to make it an uninterruptible reservation
for root bo.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unpin the wptr_obj->obj when amdgpu_ttm_alloc_gart fails.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_userq_get_doorbell_index returns a uint64 type index
as well as a int type failure values. Simplifying this and
using a int type return value and getting the index in input pointer
of type uint64 type.
Also since it's used at once place making it static would be better.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm
before calling kfd_ioctl_svm.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tg_flush_bios() schedules pending_timer on the child tg's own
service_queue, which causes throtl_pending_timer_fn() to dispatch from
the child's pending_tree. For leaf cgroups this tree is empty, so the
timer fires and exits without dispatching the throttled bio.
The throttled bio sits in the parent's pending_tree with disptime set
to jiffies (THROTL_TG_CANCELING zeroes all dispatch times), but the
parent's timer is never explicitly rescheduled. The bio only gets
dispatched when the parent timer eventually fires at its previously
scheduled expiry.
Fix by calling throtl_schedule_next_dispatch(sq->parent_sq, true)
instead, matching what tg_set_limit() already does. This forces the
parent's dispatch cycle to run immediately and flush all canceling
bios without waiting for a stale timer.
For the device deletion path (blk_throtl_cancel_bios), directly
complete throttled bios with EIO via bio_io_error() instead of
dispatching them through the timer -> work -> submission chain.
This avoids a race with the SCSI state machine where bios can reach
the SCSI layer while the device is in SDEV_CANCEL state, causing
ENODEV instead of the expected EIO.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/all/ag2owaQQoigp_fSV@shinmob/
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Link: https://patch.msgid.link/20260522091530.1901437-1-cuitao@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b040a1a452 ("block: switch numa_node to int in
blk_mq_hw_ctx and init_request") changed the type of the
`numa_node` argument of `blk_mq_ops::init_request` from
`unsigned int` to `int`. Update the Rust callback signature to
match, so that the function item can be coerced to the C fn
pointer type stored in `blk_mq_ops`.
Without this change the Rust block layer fails to build:
error[E0308]: mismatched types
--> rust/kernel/block/mq/operations.rs:274:28
|
274 | init_request: Some(Self::init_request_callback),
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^^
| expected fn pointer, found fn item
|
= note: expected fn pointer
`unsafe extern "C" fn(_, _, _, i32) -> _`
found fn item
`unsafe extern "C" fn(_, _, _, u32) -> _ {...}`
The argument is unused on the Rust side, so this is a pure
type-signature change with no functional impact.
Fixes: b040a1a452 ("block: switch numa_node to int in blk_mq_hw_ctx and init_request")
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260527-block-for-next-2026-05-26-2200-failure-v1-1-4865889e282c@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Why&How]
dccg21_init() calls dccg2_init() which hardcodes 100MHz refclk values
for MICROSECOND_TIME_BASE_DIV and MILLISECOND_TIME_BASE_DIV. DCN21
uses 48MHz refclk, so the wrong values corrupt DCCG timing and cause eDP
link training failure on cold boot.
Write the correct 48MHz values directly instead of calling dccg2_init().
v2:
Fixed typo
Fixes: e6e2b956fc ("drm/amd/display: Add missing DCCG register entries for DCN20-DCN316")
Reported-by: Max Chernoff <git@maxchernoff.ca>
Tested-by: Max Chernoff <git@maxchernoff.ca>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check_partition() allocates a buffer to use as backing memory for
seq_buf.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
For a single allocation on the cold path the performance difference between
kmalloc() and __get_free_pages() is not measurable as both allocators take
an object/page from a per-CPU list for fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260527-block-v2-1-8e06f914c484@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mutex fence_drv_lock is destroyed in amdgpu_userq_fence_driver_free
also in one of the jump condition mutex_destroy is also called leading
to double mutex_destroy.
So rearranging the code so amdgpu_userq_fence_driver_free takes care
of the clean up along with mutex_destroy.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, it is not necessary for __finalise_el2() to configure
TPIDR_EL2:
* The hyp stub code does not consume the value of TPIDR_EL2.
* On the boot cpu, TPIDR_EL1 is used for the percpu offset until the
ARM64_HAS_VIRT_HOST_EXTN cpucap is detected and boot alternatives
are patched. Before boot alternatives are patched,
cpu_copy_el2regs() will copy TPIDR_EL1 into TPIDR_EL2. It is not
necessary for __finalise_el2() to initialise TPIDR_EL2 before this.
* Secondary CPUs are brought up after boot alternatives have been
patched, and __secondary_switched() will initialize TPIDR_EL2 in
'init_cpu_task', after finalise_el2() calls __finalise_el2()
* KVM hyp code which may consume TPIDR_EL2 is brought up after all
secondaries have been booted, once TPIDR_El2 has been configured on
all CPUs.
Remove the redundant initialisation from __finalise_el2().
Cc: Oliver Upton <oupton@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260518153127.6078-1-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Make the Data struct lifetime-parameterized, storing a reference to the
parent pci::Device<Bound>. This demonstrates that registration data can
hold device resources tied to the parent driver's lifetime.
In connect(), retrieve the parent PCI device from the registration data
rather than casting through adev.parent().
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260525202921.124698-25-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Bindings can be deprecated and driver should not include bindings
headers directly. Instead define needed constants in the driver.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20260508174006.3783082-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
dm_pp_apply_power_level_change_request() was called from old
DCE clock manager implementations on DCE6, 8, 10, 11.2
but has not been implemented ever since the beginning of DC.
Affected GPUs have been working fine without that implementation
for many years. Let's delete it now.
v2:
- Delete dm_pp_apply_power_level_change_request too
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unpin and unref the door bell obj if queue creation fails before
initialization is complete.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Generalize Registration<T> to Registration<F: ForLt> and
Device::registration_data<F: ForLt>() to return Pin<&F::Of<'_>>.
The stored 'static lifetime is shortened to the borrow lifetime of &self
via ForLt::cast_ref; ForLt's covariance guarantee makes this sound.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260525202921.124698-24-dakr@kernel.org
[ Use PhantomData<F::Of<'a>> instead of
PhantomData<(fn(&'a ()) -> &'a (), F)>], which also gets us rid of
#[allow(clippy::type_complexity)]. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: Ray Wu <ray.wu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kvcalloc(args->num_entries, sizeof(*vm_entries), GFP_KERNEL) at
amdgpu_gem.c:1050 uses the user-supplied num_entries directly without
any upper bounds check. Since num_entries is a __u32 and
sizeof(drm_amdgpu_gem_vm_entry) is 32 bytes, a large num_entries
produces an allocation exceeding INT_MAX, triggering
WARNING in __kvmalloc_node_noprof(), causing a kernel WARNING,
TAINT_WARN, and panic on CONFIG_PANIC_ON_WARN=y systems.
Add a size bounds check before we invoke the kvzalloc() to
reject oversized num_entries early with -EINVAL.
Fixes: 4d82724f7f ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few cases, e.g. when dealing with data referencing each
other, one might want to write code that is generic over lifetimes. For
example, if you want to take a function that takes `&'a Foo` and gives
`Bar<'a>`, you can write:
f: impl for<'a> FnOnce(&'a Foo) -> Bar<'a>,
However, it becomes tricky when you want that function to not have a
fixed `Bar`, but have it be generic again. In this case, one needs
something that is generic over types that are themselves generic over
lifetimes.
`ForLt` provides such support. It provides a trait `ForLt` which
describes a type generic over a lifetime. One may use `ForLt::Of<'a>` to
get an instance of a type for a specific lifetime.
For the case of cross referencing, one would almost always want the
lifetime to be covariant. Therefore this is also made a requirement for
the `ForLt` trait, so functions with `ForLt` trait bound can assume
covariance.
A macro `ForLt!()` is provided to be able to obtain a type that
implements `ForLt`. For example, `ForLt!(for<'a> Bar<'a>)` would yield a
type that `<TheType as ForLt>::Of<'a>` is `Bar<'a>`. This also works
with lifetime elision, e.g. `ForLt!(Bar<'_>)` or for types without
lifetime at all, e.g. `ForLt!(u32)`.
The API design draws inspiration from the higher-kinded-types [1] crate,
however a different design decision has been taken (e.g. covariance
requirement) and the implementation is independent.
License headers use "Apache-2.0 OR MIT" because I anticipate this to be
used in pin-init crate too which is licensed as such.
Link: https://docs.rs/higher-kinded-types/ [1]
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260525202921.124698-23-dakr@kernel.org
[ Handle macro_rules! invocations in the ForLt! proc macro's covariance
and WF checks. Since proc macros cannot expand macro_rules!, add a
visit_macro() implementation to conservatively assume macro
invocations may contain lifetimes, forcing them through the
compiler-assisted covariance proof.
Fix a few typos in the documentation and in the commit message, add
empty lines before samples, add missing periods and consistently use
markdown.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Introduce NovaCoreDriver as the driver type implementing pci::Driver,
keeping NovaCore as the per-device data type. This prepares for making
NovaCore lifetime-parameterized once auxiliary::Registration requires a
lifetime for the binding scope.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260525202921.124698-22-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Convert the sample driver to SampleDriver<'bound>, taking advantage of
the lifetime-parameterized Driver trait.
The driver struct holds &'bound pci::Device directly instead of
ARef<pci::Device>, and pci::Bar<'bound> directly instead of
Devres<pci::Bar>. This removes PinnedDrop, pin_init_scope, and runtime
revocation checks on BAR access.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260525202921.124698-21-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add a lifetime parameter to IoMem<'a, SIZE> and ExclusiveIoMem<'a,
SIZE>, storing a &'a Device<Bound> reference to tie the mapping to the
device's lifetime.
This mirrors the pci::Bar<'a, SIZE> design and enables drivers to hold
I/O memory mappings directly in their HRT private data, tied to the
device lifetime.
IoRequest::iomap_* methods now return the mapping directly instead of
wrapping it in Devres. Callers that need device-managed revocation can
call the new into_devres() method.
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260525202921.124698-20-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
