Add some unit test for state machine when in SSIF_ABORTING state.
Fixes: dd2bc5cc9e ("ipmi: ssif_bmc: Add SSIF BMC driver")
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Message-ID: <20260403143939.434017-1-zhangjian.3032@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Add the OLPC XO-1 RTC compatible string to the trivial-rtc schema
instead of creating a standalone binding file, as it only requires
a compatible property with no additional configuration.
Signed-off-by: Anushka Badhe <anushkabadhe@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325093003.44051-1-anushkabadhe@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC block found in the SC2730 PMIC is compatible with the one found
in the SC2731 PMIC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Link: https://patch.msgid.link/20260329-sc27xx-mfd-cells-v3-1-9158dee41f74@abscue.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On SMP systems alternative_instructions() frees memory occupied by
smp_locks section immediately after patching the lock instructions.
The memory is freed using free_init_pages() that calls free_reserved_area()
that essentially does __free_page() for every page in the range.
Up until recently it didn't update memblock state so in cases when
CONFIG_ARCH_KEEP_MEMBLOCK is enabled (on x86 it is selected by
INTEL_TDX_HOST), the state of memblock and the memory map would be
inconsistent.
Additionally, with CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled, freeing of
smp_locks happens before the memory map is fully initialized and freeing
reserved memory may cause an access to not-yet-initialized struct page when
__free_page() searches for a buddy page.
Following the discussion in [1], implementation of memblock_free_late() and
free_reserved_area() was unified to ensure that reserved memory that's
freed after memblock transfers the pages to the buddy allocator is actually
freed and that the memblock and the memory map are consistent. As a part of
these changes, free_reserved_area() now WARN()s when it is called before
the initialization of the memory map is complete.
The memory map is fully initialized in page_alloc_init_late() that
completes before initcalls are executed, so it is safe to free reserved
memory in any initcall except early_initcall().
Move freeing of smp_locks section to an initcall to ensure it will happen
after the memory map is fully initialized. Since it does not matter which
exactly initcall to use and the code lives in arch/, pick arch_initcall.
[1] https://lore.kernel.org/all/ec2aaef14783869b3be6e3c253b2dcbf67dbc12a.camel@kernel.crashing.org
Reported-By: Bert Karwatzki <spasswolf@web.de>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202603302154.b50adaf1-lkp@intel.com
Tested-By: Bert Karwatzki <spasswolf@web.de>
Link: https://lore.kernel.org/r/20260327140109.7561-1-spasswolf@web.de
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Fixes: b2129a3951 ("memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
aravindanilraj0702@gmail.com <aravindanilraj0702@gmail.com> says:
From: Aravind Anilraj <aravindanilraj0702@gmail.com>
This series fixes MCLK resource leaks in the platform_clock_control()
implementations for bytcr_rt5640, bytcr_rt5651, and cht_bsw_rt5672.
In the SND_SOC_DAPM_EVENT_ON() path, clk_prepare_enable() is called to
enable MCLK, but subsequent failures in codec clock configuration (eg:
*_prepare_and_enable_pll1() or snd_soc_dai_set_sysclk()) return without
disabling the clock, leaking a reference.
Patches 1-3 fix this by adding the missing clk_disable_unprepare() calls
in the relevant error paths, ensuring proper symmetry between enable and
disable operations within the EVENT_ON scope.
Patch 4 moves unrelated logging changes into a separate patch and
standardizes error messages.
Standardize the error logging in platform_clock_control() by adding
missing newline characters to dev_err() strings. Additionally, include
the return code in the error messages to assist with debugging.
Signed-off-by: Aravind Anilraj <aravindanilraj0702@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260401220507.23557-5-aravindanilraj0702@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If snd_soc_dai_set_pll() or snd_soc_dai_set_sysclk() fail inside the
EVENT_ON path, the function returns without calling
clk_disable_unprepare() on ctx->mclk, which was already enabled earlier
in the same code path. Add the missing clk_disable_unprepare() calls
before returning the error.
Signed-off-by: Aravind Anilraj <aravindanilraj0702@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260401220507.23557-4-aravindanilraj0702@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If byt_rt5651_prepare_and_enable_pll1() fails, the function returns
without calling clk_disable_unprepare() on priv->mclk, which was
already enabled earlier in the same code path. Add the missing
cleanup call to prevent the clock from leaking.
Signed-off-by: Aravind Anilraj <aravindanilraj0702@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260401220507.23557-3-aravindanilraj0702@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If byt_rt5640_prepare_and_enable_pll1() fails, the function returns
without calling clk_disable_unprepare() on priv->mclk, which was
already enabled earlier in the same code path. Add the missing
cleanup call to prevent the clock from leaking.
Signed-off-by: Aravind Anilraj <aravindanilraj0702@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260401220507.23557-2-aravindanilraj0702@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add hw_params callback to dynamically switch DAI format between I2S
and PDM based on audio stream format. When DSD formats are detected,
the DAI format is switched to PDM mode.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260326055614.3614104-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export the Q7.8 volume control helpers to allow reuse
by other ASoC drivers. These functions handle 16-bit
signed Q7.8 fixed-point format values for volume controls.
Changes include:
- Rename q78_get_volsw to sdca_asoc_q78_get_volsw
- Rename q78_put_volsw to sdca_asoc_q78_put_volsw
- Add a convenience macro SDCA_SINGLE_Q78_TLV and
SDCA_DOUBLE_Q78_TLV for creating mixer controls
This allows other ASoC drivers to easily implement controls
using the Q7.8 fixed-point format without duplicating code.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260401132148.2367-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the retaskable jack Function to the list of Functions supported by
the class driver, it shouldn't require anything that isn't already
supported.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260327162732.877257-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce exfat_chain_advance() to walk a exfat_chain structure by a
given step, updating both ->dir and ->size fields atomically. This
helper handles both ALLOC_NO_FAT_CHAIN and ALLOC_FAT_CHAIN modes with
proper boundary checking.
Suggested-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since exfat_get_next_cluster has been updated, no callers pass a NULL
pointer to exfat_ent_get, so remove the handling logic for this case.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Replace the custom exfat_walk_fat_chain() function and open-coded
FAT chain walking logic with the exfat_cluster_walk() helper across
exfat_find_location, __exfat_get_dentry_set, and exfat_map_cluster.
Suggested-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Introduce exfat_cluster_walk() to walk the FAT chain by a given step,
handling both ALLOC_NO_FAT_CHAIN and ALLOC_FAT_CHAIN modes. Also
redefine exfat_get_next_cluster as a thin wrapper around it for
backward compatibility.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When renaming a file in-place to a shorter name, exfat_remove_entries
marks excess entries as DELETED, but es->num_entries is not updated
accordingly. As a result, exfat_update_dir_chksum iterates over the
deleted entries and computes an incorrect checksum.
This does not lead to persistent corruption because mark_inode_dirty()
is called afterward, and __exfat_write_inode later recomputes the
checksum using the correct num_entries value.
Fix by setting es->num_entries = num_entries in exfat_init_ext_entry.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Make various changes to the documentation formatting to avoid docs
build errors and otherwise improve the produced output format:
- use bullets for lists
- don't use a '.' at the end of echo commands
- fix indentation
Documentation/admin-guide/nfs/pnfs-block-server.rst:55: ERROR: Unexpected indentation. [docutils]
Documentation/admin-guide/nfs/pnfs-scsi-server.rst:37: ERROR: Unexpected indentation. [docutils]
Fixes: 6a97f70b45e7 ("NFSD: Enforce timeout on layout recall and integrate lease manager fencing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The file contains a spelling error in a source comment (occured).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'occured' with 'occurred' in the affected comment. This is a
comment-only cleanup and does not change behavior.
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The file contains a spelling error in a source comment (occured).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'occured' with 'occurred' in the affected comment. This is a
comment-only cleanup and does not change behavior.
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The callback channel's rpc_program, rpc_version, rpc_stat,
and per-procedure counts are declared as file-scope statics in
nfs4callback.c, shared across all network namespaces.
Forechannel RPC statistics are already maintained per-netns
(via nfsd_svcstats in struct nfsd_net); the backchannel
has no such separation. When backchannel statistics are
eventually surfaced to userspace, the global counters would
expose cross-namespace data.
Allocate per-netns copies of these structures through a new
opaque struct nfsd_net_cb, managed by nfsd_net_cb_init()
and nfsd_net_cb_shutdown(). The struct definition is private
to nfs4callback.c; struct nfsd_net holds only a pointer.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The callback RPC procedure table uses NFSPROC4_CB_##call for
p_statidx, which maps CB_NULL to index 0 and every
compound-based callback (CB_RECALL, CB_LAYOUT, CB_OFFLOAD,
etc.) to index 1. All compound callback operations therefore
share a single statistics counter, making per-operation
accounting impossible.
Assign p_statidx from the NFSPROC4_CLNT_##proc enum instead,
giving each callback operation its own counter slot. The
counts array is already sized by ARRAY_SIZE(nfs4_cb_procedures),
so no allocation change is needed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_rdma_build_read_segment() constructs RDMA Read sink
buffers by consuming pages one-at-a-time from rq_pages[]
and building one bvec per page. A 64KB NFS READ payload
produces 16 separate bvecs, 16 DMA mappings, and
potentially multiple RDMA Read WRs (on platforms with
4KB pages).
A single higher-order allocation followed by split_page()
yields physically contiguous memory while preserving
per-page refcounts. A single bvec spanning the contiguous
range causes rdma_rw_ctx_init_bvec() to take the
rdma_rw_init_single_wr_bvec() fast path: one DMA mapping,
one SGE, one WR.
The split sub-pages replace the original rq_pages[] entries,
so all downstream page tracking, completion handling, and
xdr_buf assembly remain unchanged.
Allocation uses __GFP_NORETRY | __GFP_NOWARN and falls back
through decreasing orders. If even order-1 fails, the
existing per-page path handles the segment.
When nr_pages is not a power of two, get_order() rounds up
and the allocation yields more pages than needed. The extra
split pages replace existing rq_pages[] entries (freed via
put_page() first), so there is no net increase in per-
request page consumption. Successive segments reuse the
same padding slots, preventing accumulation. The
rq_maxpages guard rejects any allocation that would
overrun the array, falling back to the per-page path.
Under memory pressure, __GFP_NORETRY causes the higher-
order allocation to fail without stalling.
The contiguous path is attempted when the segment starts
page-aligned (rc_pageoff == 0) and spans at least two
pages. NFS WRITE segments carry application-modified byte
ranges of arbitrary length, so the optimization is not
restricted to power-of-two page counts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_rqst_replace_page() releases displaced pages through a
per-rqst folio batch, but exposes the add-or-flush sequence
directly. svc_tcp_restore_pages() releases displaced pages
individually with put_page().
Introduce svc_rqst_page_release() to encapsulate the
batched release mechanism. Convert svc_rqst_replace_page()
and svc_tcp_restore_pages() to use it. The latter now
benefits from the same batched release that
svc_rqst_replace_page() already uses.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Long-running tests indicate that this logging can occasionally disrupt
timing and lead to request/response corruption.
Irq handler need to be executed as fast as possible,
most I2C slave IRQ implementations are byte-level, logging here
can significantly affect transfer behavior and timing. It is recommended
to use dev_dbg() for these messages.
Fixes: dd2bc5cc9e ("ipmi: ssif_bmc: Add SSIF BMC driver")
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Message-ID: <20260403090603.3988423-4-zhangjian.3032@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
copy_to_user() returns the number of bytes that could not be copied,
with a non-zero value indicating a partial or complete failure. The
current code only checks for negative return values and treats all
non-negative results as success.
Treating any positive return value from copy_to_user() as
an error and returning -EFAULT.
Fixes: dd2bc5cc9e ("ipmi: ssif_bmc: Add SSIF BMC driver")
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Message-ID: <20260403090603.3988423-2-zhangjian.3032@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
The response timer can stay armed across device teardown. If it fires after
remove, the callback dereferences the SSIF context and the i2c client after
teardown has started.
Cancel the timer in remove so the callback cannot run after the device is
unregistered.
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Message-ID: <20260403090603.3988423-1-zhangjian.3032@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
component_dais[RSND_MAX_COMPONENT] is initially zero-initialized
and later populated in rsnd_dai_of_node(). However, the existing boundary check:
if (i >= RSND_MAX_COMPONENT)
does not guarantee that the last valid element remains zero. As a result,
the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero,
which may lead to an out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 547b02f74e ("ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2")
Signed-off-by: Denis Rastyogin <gerben@altlinux.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260327103311.459239-1-gerben@altlinux.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there is no mechanism to read dmic_num in mach_params
structure. In this scenario mach_params->dmic_num check always
returns 0.
Remove unnecessary condition check for mach_params->dmic_num.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260403063452.159800-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MSRs, SMI_COUNT and PPERF, are model-specific MSRs. A very long
CPU ID list is maintained to indicate the supported platforms. With more
and more platforms being introduced, new CPU IDs have to be kept adding.
Also, the old kernel has to be updated to apply the new CPU ID.
The MSRs have been introduced for a long time. There is no plan to
change them in the near future. Furthermore, the current code utilizes
rdmsr_safe() to check the availability of MSRs before using it.
Make them on by default. It should be good enough to only rely on the
rdmsr_safe() to check their availability for both existing and future
platforms.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260327052844.818218-1-dapeng1.mi@linux.intel.com
Delayed dequeue feature aims to reduce the negative lag of a dequeued
task while sleeping but it can happens that newly enqueued tasks will
move backward the avg vruntime and increase its negative lag.
When the delayed dequeued task wakes up, it has more neg lag compared
to being dequeued immediately or to other tasks that have been
dequeued just before theses new enqueues.
Ensure that the negative lag of a delayed dequeued task doesn't
increase during its delayed dequeued phase while waiting for its neg
lag to diseappear. Similarly, we remove any positive lag that the
delayed dequeued task could have gain during thsi period.
Short slice tasks are particularly impacted in overloaded system.
Test on snapdragon rb5:
hackbench -T -p -l 16000000 -g 2 1> /dev/null &
cyclictest -t 1 -i 2777 -D 333 --policy=fair --mlock -h 20000 -q
The scheduling latency of cyclictest is:
tip/sched/core tip/sched/core +this patch
cyclictest slice (ms) (default)2.8 8 8
hackbench slice (ms) (default)2.8 20 20
Total Samples | 115632 119733 119806
Average (us) | 364 64(-82%) 61(- 5%)
Median (P50) (us) | 60 56(- 7%) 56( 0%)
90th Percentile (us) | 1166 62(-95%) 62( 0%)
99th Percentile (us) | 4192 73(-98%) 72(- 1%)
99.9th Percentile (us) | 8528 2707(-68%) 1300(-52%)
Maximum (us) | 17735 14273(-20%) 13525(- 5%)
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260331162352.551501-1-vincent.guittot@linaro.org
Use helper sched_energy_enabled() everywhere we want to test if EAS is
enabled instead of mixing sched_energy_enabled() and direct call to
static_branch_unlikely().
No functional change
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260327132013.2800517-1-vincent.guittot@linaro.org
Add logic to handle migrating a blocked waiter to a remote
cpu where the lock owner is runnable.
Additionally, as the blocked task may not be able to run
on the remote cpu, add logic to handle return migration once
the waiting task is given the mutex.
Because tasks may get migrated to where they cannot run, also
modify the scheduling classes to avoid sched class migrations on
mutex blocked tasks, leaving find_proxy_task() and related logic
to do the migrations and return migrations.
This was split out from the larger proxy patch, and
significantly reworked.
Credits for the original patch go to:
Peter Zijlstra (Intel) <peterz@infradead.org>
Juri Lelli <juri.lelli@redhat.com>
Valentin Schneider <valentin.schneider@arm.com>
Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260324191337.1841376-11-jstultz@google.com
The fair scheduler locally introduced attach_one_task() and
attach_task() helpers, but these could be generically useful so
move this code to sched.h so we can use them elsewhere.
One minor tweak made to utilize guard(rq_lock)(rq) to simplifiy
the function.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-10-jstultz@google.com
With proxy-exec, a task is selected to run via pick_next_task(),
and then if it is a mutex blocked task, we call find_proxy_task()
to find a runnable owner. If the runnable owner is on another
cpu, we will need to migrate the selected donor task away, after
which we will pick_again can call pick_next_task() to choose
something else.
However, in the first call to pick_next_task(), we may have
had a balance_callback setup by the class scheduler. After we
pick again, its possible pick_next_task_fair() will be called
which calls sched_balance_newidle() and sched_balance_rq().
This will throw a warning:
[ 8.796467] rq->balance_callback && rq->balance_callback != &balance_push_callback
[ 8.796467] WARNING: CPU: 32 PID: 458 at kernel/sched/sched.h:1750 sched_balance_rq+0xe92/0x1250
...
[ 8.796467] Call Trace:
[ 8.796467] <TASK>
[ 8.796467] ? __warn.cold+0xb2/0x14e
[ 8.796467] ? sched_balance_rq+0xe92/0x1250
[ 8.796467] ? report_bug+0x107/0x1a0
[ 8.796467] ? handle_bug+0x54/0x90
[ 8.796467] ? exc_invalid_op+0x17/0x70
[ 8.796467] ? asm_exc_invalid_op+0x1a/0x20
[ 8.796467] ? sched_balance_rq+0xe92/0x1250
[ 8.796467] sched_balance_newidle+0x295/0x820
[ 8.796467] pick_next_task_fair+0x51/0x3f0
[ 8.796467] __schedule+0x23a/0x14b0
[ 8.796467] ? lock_release+0x16d/0x2e0
[ 8.796467] schedule+0x3d/0x150
[ 8.796467] worker_thread+0xb5/0x350
[ 8.796467] ? __pfx_worker_thread+0x10/0x10
[ 8.796467] kthread+0xee/0x120
[ 8.796467] ? __pfx_kthread+0x10/0x10
[ 8.796467] ret_from_fork+0x31/0x50
[ 8.796467] ? __pfx_kthread+0x10/0x10
[ 8.796467] ret_from_fork_asm+0x1a/0x30
[ 8.796467] </TASK>
This is because if a RT task was originally picked, it will
setup the rq->balance_callback with push_rt_tasks() via
set_next_task_rt().
Once the task is migrated away and we pick again, we haven't
processed any balance callbacks, so rq->balance_callback is not
in the same state as it was the first time pick_next_task was
called.
To handle this, add a zap_balance_callbacks() helper function
which cleans up the balance callbacks without running them. This
should be ok, as we are effectively undoing the state set in
the first call to pick_next_task(), and when we pick again,
the new callback can be configured for the donor task actually
selected.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-9-jstultz@google.com
With proxy-exec utilizing pick-again logic, we can end up having
balance callbacks set by the preivous pick_next_task() call left
on the list.
So pull the warning out into a helper function, and make sure we
check it when we pick again.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-8-jstultz@google.com
As we add functionality to proxy execution, we may migrate a
donor task to a runqueue where it can't run due to cpu affinity.
Thus, we must be careful to ensure we return-migrate the task
back to a cpu in its cpumask when it becomes unblocked.
Peter helpfully provided the following example with pictures:
"Suppose we have a ww_mutex cycle:
,-+-* Mutex-1 <-.
Task-A ---' | | ,-- Task-B
`-> Mutex-2 *-+-'
Where Task-A holds Mutex-1 and tries to acquire Mutex-2, and
where Task-B holds Mutex-2 and tries to acquire Mutex-1.
Then the blocked_on->owner chain will go in circles.
Task-A -> Mutex-2
^ |
| v
Mutex-1 <- Task-B
We need two things:
- find_proxy_task() to stop iterating the circle;
- the woken task to 'unblock' and run, such that it can
back-off and re-try the transaction.
Now, the current code [without this patch] does:
__clear_task_blocked_on();
wake_q_add();
And surely clearing ->blocked_on is sufficient to break the
cycle.
Suppose it is Task-B that is made to back-off, then we have:
Task-A -> Mutex-2 -> Task-B (no further blocked_on)
and it would attempt to run Task-B. Or worse, it could directly
pick Task-B and run it, without ever getting into
find_proxy_task().
Now, here is a problem because Task-B might not be runnable on
the CPU it is currently on; and because !task_is_blocked() we
don't get into the proxy paths, so nobody is going to fix this
up.
Ideally we would have dequeued Task-B alongside of clearing
->blocked_on, but alas, [the lock ordering prevents us from
getting the task_rq_lock() and] spoils things."
Thus we need more than just a binary concept of the task being
blocked on a mutex or not.
So allow setting blocked_on to PROXY_WAKING as a special value
which specifies the task is no longer blocked, but needs to
be evaluated for return migration *before* it can be run.
This will then be used in a later patch to handle proxy
return-migration.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-7-jstultz@google.com
Introduce an action enum in find_proxy_task() which allows
us to handle work needed to be done outside the mutex.wait_lock
and task.blocked_lock guard scopes.
This ensures proper locking when we clear the donor's blocked_on
pointer in proxy_deactivate(), and the switch statement will be
useful as we add more cases to handle later in this series.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-6-jstultz@google.com
So far, we have been able to utilize the mutex::wait_lock
for serializing the blocked_on state, but when we move to
proxying across runqueues, we will need to add more state
and a way to serialize changes to this state in contexts
where we don't hold the mutex::wait_lock.
So introduce the task::blocked_lock, which nests under the
mutex::wait_lock in the locking order, and rework the locking
to use it.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-5-jstultz@google.com
K Prateek pointed out that with Proxy Exec, we may have cases
where we context switch in __schedule(), while the donor remains
the same. This could cause balancing issues, since the
put_prev_set_next() logic short-cuts if (prev == next). With
proxy-exec prev is the previous donor, and next is the next
donor. Should the donor remain the same, but different tasks are
picked to actually run, the shortcut will have avoided enqueuing
the sched class balance callback.
So, if we are context switching, add logic to catch the
same-donor case, and trigger the put_prev/set_next calls to
ensure the balance callbacks get enqueued.
Closes: https://lore.kernel.org/lkml/20ea3670-c30a-433b-a07f-c4ff98ae2379@amd.com/
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260324191337.1841376-4-jstultz@google.com
Peter noted: Compilers are really bad (as in they utterly refuse)
optimizing (even when marked with __pure) the static branch
things, and will happily emit multiple identical in a row.
So pull out the one obvious sched_proxy_exec() branch in
__schedule() and remove some of the 'implicit' ones in that
path.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-3-jstultz@google.com
With proxy-execution, the scheduler selects the donor, but for
blocked donors, we end up running the lock owner.
This caused some complexity, because the class schedulers make
sure to remove the task they pick from their pushable task
lists, which prevents the donor from being migrated, but there
wasn't then anything to prevent rq->curr from being migrated
if rq->curr != rq->donor.
This was sort of hacked around by calling proxy_tag_curr() on
the rq->curr task if we were running something other then the
donor. proxy_tag_curr() did a dequeue/enqueue pair on the
rq->curr task, allowing the class schedulers to remove it from
their pushable list.
The dequeue/enqueue pair was wasteful, and additonally K Prateek
highlighted that we didn't properly undo things when we stopped
proxying, leaving the lock owner off the pushable list.
After some alternative approaches were considered, Peter
suggested just having the RT/DL classes just avoid migrating
when task_on_cpu().
So rework pick_next_pushable_dl_task() and the rt
pick_next_pushable_task() functions so that they skip over the
first pushable task if it is on_cpu.
Then just drop all of the proxy_tag_curr() logic.
Fixes: be39617e38 ("sched: Fix proxy/current (push,pull)ability")
Closes: https://lore.kernel.org/lkml/e735cae0-2cc9-4bae-b761-fcb082ed3e94@amd.com/
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260324191337.1841376-2-jstultz@google.com
The newly added serdev code fails to link when serdev is turned off:
arm-linux-gnueabi-ld: drivers/power/sequencing/pwrseq-pcie-m2.o: in function `pwrseq_pcie_m2_remove_serdev':
pwrseq-pcie-m2.c:(.text+0xc8): undefined reference to `serdev_device_remove'
arm-linux-gnueabi-ld: drivers/power/sequencing/pwrseq-pcie-m2.o: in function `pwrseq_m2_pcie_notify':
pwrseq-pcie-m2.c:(.text+0x69c): undefined reference to `of_find_serdev_controller_by_node'
arm-linux-gnueabi-ld: pwrseq-pcie-m2.c:(.text+0x6f8): undefined reference to `serdev_device_alloc'
arm-linux-gnueabi-ld: pwrseq-pcie-m2.c:(.text+0x724): undefined reference to `serdev_device_add'
Add another Kconfig dependency for this
Fixes: 3f736aecbd ("power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260401191030.948046-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The driver fails to build when PCI is disabled:
drivers/power/sequencing/pwrseq-pcie-m2.c: In function 'pwrseq_pcie_m2_register_notifier':
drivers/power/sequencing/pwrseq-pcie-m2.c:368:54: error: 'pci_bus_type' undeclared (first use in this function); did you mean 'pci_pcie_type'?
368 | ret = bus_register_notifier(&pci_bus_type, &ctx->nb);
| ^~~~~~~~~~~~
| pci_pcie_type
Similarly, when CONFIG_OF is disabled:
drivers/power/sequencing/pwrseq-pcie-m2.c: In function 'pwrseq_m2_pcie_create_bt_node':
drivers/power/sequencing/pwrseq-pcie-m2.c:191:9: error: implicit declaration of function 'of_changeset_init' [-Wimplicit-function-declaration]
191 | of_changeset_init(ctx->ocs);
| ^~~~~~~~~~~~~~~~~
Make both dependencies unconditional to prevent compile-testing
in either configuration.
Fixes: 3f736aecbd ("power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20260401091847.305294-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The hstateen0 will be programmed differently for guest HS-mode
and guest VS/VU-mode so don't check hstateen0.SSTATEEN0 bit when
updating sstateen0 CSR in kvm_riscv_vcpu_swap_in_guest_state()
and kvm_riscv_vcpu_swap_in_host_state().
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Reviewed-by: Radim Krčmář <radim.krcmar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260120080013.2153519-10-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The VCPU config deals with hideleg, hedeleg, henvcfg, and hstateenX
CSR configuration for each VCPU. Factor-out VCPU config into separate
sources so that VCPU config can do things differently for guest HS-mode
and guest VS/VU-mode.
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Reviewed-by: Radim Krčmář <radim.krcmar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260120080013.2153519-9-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
