KCSAN detected a data race within the bcm_rx_handler() when two CAN frames
have been simultaneously received and processed in a single rx op by two
different CPUs.
Use atomic operations with (signed) long data types to access the
statistics in the hot path to fix the KCSAN complaint.
Additionally simplify the update and check of statistics overflow by
using the atomic operations in separate bcm_update_[rx|tx]_stats()
functions. The rx variant runs under bcm_rx_update_lock to prevent
races when resetting the two rx counters; the tx variant runs under
bcm_tx_lock and only needs to guard its own counter's overflow.
As the rx path resets its values already at LONG_MAX / 100, there is
no conflict between the two locking domains (bcm_rx_update_lock vs.
bcm_tx_lock) even for ops that use both paths.
The rx statistics update and the frames_filtered update in
bcm_rx_changed() were previously performed in two separate
bcm_rx_update_lock sections. For an rx op subscribed on all interfaces
(ifindex == 0), bcm_rx_handler() can run concurrently on different
CPUs, so a counter reset by one CPU between these two sections could
leave frames_filtered larger than frames_abs on another CPU, producing
a bogus (even negative) reduction percentage in procfs. Update the
statistics in the same critical section as bcm_rx_changed() to close
this gap, which also removes the now unneeded extra lock/unlock pair
around the traffic_flags calculation.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-4-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
KCSAN detected a simultaneous access to timer values that can be
overwritten in bcm_rx_setup() when updating timer and filter content
while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler()
run concurrently on incoming CAN traffic.
Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter
(nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new
per-op bcm_rx_update_lock, taken with the matching scope in the RX
handlers. memcpy_from_msg() is staged into a temporary buffer before the
lock is taken, since it can sleep and must not run under a spinlock.
hrtimer_cancel() is always called without bcm_rx_update_lock held, since
bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a
running callback would otherwise deadlock against the canceller.
Also close a related race: bcm_rx_setup() cleared the RTR flag in the
stored reply frame's can_id as a separate, unprotected step after the
frame content was already installed, so a concurrent bcm_rx_handler()
could transmit a stale reply with CAN_RTR_FLAG still set. Fold that
normalization into the initial frame preparation instead (on the staged
buffer for updates, directly on op->frames pre-registration for new
ops), so the installed frame is always atomically self-consistent.
bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected
snapshot of op->flags before deciding whether to call bcm_can_tx(),
but does not hold the lock across that call.
Also take a lock-protected snapshot of the currframe in bcm_can_tx()
to avoid partly overwrites by content updates in bcm_tx_setup().
Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset
op->currframe between the two locked sections in bcm_can_tx().
Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler().
kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it
cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.
Fixes: c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+75e5e4ae00c3b4bb544e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/6975d5cf.a00a0220.33ccc7.0022.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-3-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking
lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all
mutate both fields under that same lock. Because the lockless reads
and the locked writes are unordered with respect to each other, a
racing bcm_notify() (device unregister) or bcm_connect() (concurrent
bind on another thread sharing the socket) can make bcm_sendmsg()
observe an inconsistent combination, e.g. a stale bound=1 together
with the now-cleared ifindex=0, silently turning a socket bound to a
specific CAN interface into one that also matches "any" interface.
Keep the lockless bo->bound check purely as a fast-path reject, and
move the ifindex read (and a bo->bound re-check) into the locked
section, where every writer already serializes. This removes the
possibility of observing the two fields torn against each other,
rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs
on two independently updated fields. Annotate the now-purely-lockless
bo->bound accesses consistently across all its write sites.
Also fix bcm_rx_setup() silently returning success when the target
device disappears concurrently instead of reporting -ENODEV, so a
broken RX op is no longer left registered as if it had succeeded.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: Ginger <ginger.jzllee@gmail.com>
Closes: https://lore.kernel.org/linux-can/CAGp+u1aBK8QVjsvAxM2Ldzep4rEbsP9x_pV3At4g=h1kVEtyhA@mail.gmail.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-2-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit f1b4e32aca ("can: bcm: use call_rcu() instead of costly
synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op()
with call_rcu() and introduced the RX_NO_AUTOTIMER flag.
However, this flag check was omitted for thrtimer in the packet rx
fast-path. During BCM RX operation teardown, a concurrent RCU reader
(bcm_rx_handler) can race and re-arm thrtimer via
bcm_rx_update_and_send() after call_rcu() has been scheduled. Once
the RCU grace period elapses, bcm_op is freed. The subsequently
firing thrtimer then dereferences the deallocated op, causing a UAF.
Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not
fully close the TOCTOU race and introduces latency for every CAN frame.
Conversely, calling hrtimer_cancel() directly inside the RCU callback
(softirq context) is fatal as hrtimer_cancel() can sleep, triggering
a "scheduling while atomic" panic.
Resolve this by deferring the timer cancellation and memory free to a
dedicated unbound workqueue (bcm_wq). The RCU callback now queues a
work item to bcm_wq, which safely cancels both timers and deallocates
memory in sleepable process context. A dedicated workqueue is used to
prevent system-wide WQ saturation and is cleanly flushed/destroyed
on module unload to avoid rmmod page faults.
Since the deferred work can now outlive the calling context by an
unbounded amount, also take a reference on op->sk when it is assigned
and drop it only once the deferred work has cancelled both timers, so a
socket can no longer be freed out from under a still-armed timer whose
callback (bcm_send_to_user()) dereferences op->sk.
Fixes: f1b4e32aca ("can: bcm: use call_rcu() instead of costly synchronize_rcu()")
Tested-by: Feng Xue <feng.xue@outlook.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-1-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Following the sale of PEAK-System France by HMS-Networks, this update is
intended to change all my @hms-networks.com email addresses to my new
@peak-system.fr address.
Signed-off-by: Stéphane Grosjean <s.grosjean@peak-system.fr>
Link: https://patch.msgid.link/20260410124251.40506-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
j1939_priv.ents[].nusers is documented as protected by priv->lock, and
its updates already happen under that lock. j1939_can_recv() also reads
it under read_lock_bh(). However, j1939_session_skb_queue() and
j1939_tp_send() still read priv->ents[da].nusers without taking the
lock.
Those transport-side checks decide whether to set J1939_ECU_LOCAL_DST, so
they can race with j1939_local_ecu_get() and j1939_local_ecu_put() while
userspace is binding or releasing sockets concurrently with TP traffic.
This can misclassify TP/ETP sessions as local or remote and take the wrong
transport path.
Fix both transport paths by routing the destination-locality check through
a helper that reads ents[].nusers under read_lock_bh(&priv->lock).
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260419140614.GA4041240@chcpu16
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran
on goes through a hotplug cycle (online->offline->online), and the vCPU
then resumes execution on the same pCPU, then it is possible for it to
run with an ASID that has now been assigned to a different vCPU,
resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets
next_asid to max_asid + 1 on every CPU online event, including hotplug
cycles. Because next_asid starts beyond the pool boundary, the first
call to new_asid() after an online event always wraps the pool,
incrementing asid_generation to 2 and assigning ASIDs starting from
min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding
asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1,
next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping
the pool and consuming ASIDs starting from min_asid. Eventually
vCPU-B from a different VM is assigned asid_generation=2, ASID=N
— the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is
unchanged so the migration branch is skipped. Its saved
asid_generation=2 matches sd->asid_generation=2, so the generation
check silently passes and vCPU-A continues running with ASID=N —
the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID,
causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation
failure). The NPT page fault reports a faulting GPA far outside the
VM's physical memory range — a sign of stale TLB translations being
used. KVM falls back to instruction emulation, which fails on
FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not
implement.
Fix this by incrementing asid_generation instead of resetting it to 1
in svm_enable_virtualization_cpu(). On module load, asid_generation
starts at 0 (memset) and the increment produces 1, identical to the
old behaviour. On subsequent hotplug cycles the generation advances
beyond any value a vCPU previously observed on this CPU, so the
generation check in pre_svm_run() reliably forces new_asid() on every
vCPU after every hotplug cycle.
Fixes: 774c47f1d7 ("[PATCH] KVM: cpu hotplug support")
Reported-by: Chandrakanth Silveru <Chandrakanth.Silveru@amd.com>
Tested-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Message-ID: <20260715063506.672432-1-nikunj@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nazar Kazakov reported non-deterministic builds due to the metrics
being reordered in the jevents.py output. The metrics were largely
only being sorted by name, add in the expressions and descriptions.
Reported-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Closes: https://lore.kernel.org/linux-perf-users/20260706175624.692736-1-nazar.kazakov@codethink.co.uk/
Fixes: 40769665b6 ("perf jevents: Parse metrics during conversion")
Tested-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The first entry of the sched_usage is dynamically allocated in
parse_options_subcommand() so it should be released at the end.
Do not return from a subcommand directly.
Fixes: 064790a3d4 ("perf sched stats: Add support for diff subcommand")
Reviewed-and-tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The second pass data is not saved in the list and only used to calculate
delta from the first pass. Let's free the data after use.
Fixes: 5a357ae6ad ("perf sched stats: Add support for report subcommand")
Reviewed-and-tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The perf sched stats record missed to release the session and ASAN
reported a leak.
Fixes: c3030995f2 ("perf sched stats: Add record and rawdump support")
Reviewed-and-tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes warning suppressions with kunit built as module:
CONFIG_KUNIT is a tristate symbol but the warning suppression code in
lib/bug.c is only built if it's built-in due to it using a plain #ifdef,
rendering warning suppressions broken for kunit build as loadable module.
kunit_is_suppressed_warning() already has a stub for when kunit is
disabled so drop that guard entirely.
-----BEGIN PGP SIGNATURE-----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=h2uc
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fix from Shuah Khan:
"Fix warning suppressions with kunit built as module:
CONFIG_KUNIT is a tristate symbol but the warning suppression code in
lib/bug.c is only built if it's built-in due to it using a plain
#ifdef, rendering warning suppressions broken for kunit build as
loadable module.
kunit_is_suppressed_warning() already has a stub for when kunit is
disabled so drop that guard entirely"
* tag 'linux_kselftest-kunit-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
bug: fix warning suppressions with kunit built as module
Fixes ftrace reading enabled_func test in add_remove_fprobe_module test.
Fixes tracing trigger-hist-poll.tc to use sched_process_exit.
-----BEGIN PGP SIGNATURE-----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=Bydi
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- Fix ftrace reading enabled_func test in add_remove_fprobe_module test
- Fix tracing trigger-hist-poll.tc to use sched_process_exit
* tag 'linux_kselftest-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/tracing: Have trigger-hist-poll.tc use sched_process_exit
selftests/ftrace: Fix reading enabled_functions in add_remove_fprobe_module test
During one of my local btrfs fstests runs, folio_alloc() inside
folio_alloc_greedy() triggered an allocation failure report when trying
to allocate an order-4 folio.
The kernel is from the latest development branch, which is utilizing
the IOMAP_DIO_BOUNCE flag for direct writes when the inode requires
checksum.
Unfortunately I didn't save the full log, only the function and the
order.
When the IOMAP_DIO_BOUNCE flag is utilized, we will hit the following call
chain:
bio_iov_iter_bounce_write()
|- folio_alloc_greedy()
|- folio_alloc(gfp | __GFP_NORETRY, get_order(*size));
However __GFP_NORETRY will still emit an allocation failure report
when it fails.
And folio_alloc_greedy() will retry with a smaller order anyway, there
is no point in emitting that allocation failure report.
Append the __GFP_NOWARN flag to folio_alloc() for the larger-order folio
attempts.
Fixes: 8dd5e7c75d ("block: add helpers to bounce buffer an iov_iter into bios")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Link: https://patch.msgid.link/d10571445ee505d95ba6eaad7558fc1f556d2921.1784020005.git.wqu@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
aix_partition() reads the logical-volume descriptor array as a single
sector and then scans it:
if (numlvs && (d = read_part_sector(state, vgda_sector + 1, §))) {
struct lvd *p = (struct lvd *)d;
...
for (i = 0; foundlvs < numlvs && i < state->limit; i++) {
lvip[i].pps_per_lv = be16_to_cpu(p[i].num_lps);
p points at a single 512-byte sector, which holds SECTOR_SIZE /
sizeof(struct lvd) = 16 entries, but the loop runs until foundlvs reaches
the on-disk numlvs or i reaches state->limit (DISK_MAX_PARTS, 256).
numlvs is an on-disk __be16 read straight from the volume group
descriptor and is not validated, so a crafted AIX image with numlvs
larger than 16 and lvd entries whose num_lps fields are zero (so foundlvs
never advances) drives the loop to read p[i] well past the end of the
read sector buffer.
Commit d97a86c170 ("partitions: aix.c: off by one bug") hardened the
matching write of lvip[lv_ix] in 2014 but left this read loop unbounded.
Bound the scan to the number of struct lvd entries that fit in the
sector that was actually read.
Fixes: 6ceea22bbb ("partitions: add aix lvm partition support files")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260714114806.3761553-1-michael.bommarito@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When radix_tree_insert() fails in blkg_create(), the error path has two
issues:
1. blkg->online is set to true unconditionally, even when the blkg was
never fully inserted. Move the assignment inside the success block.
2. The error path calls blkg_put() without first calling
percpu_ref_kill(). Because the refcount is still in percpu mode,
percpu_ref_put() only does this_cpu_sub() without checking for zero,
so blkg_release() is never triggered. This permanently leaks the
blkg memory, its percpu iostat, policy data, the parent blkg
reference, and the cgroup css reference — the latter preventing the
cgroup from ever being destroyed.
Fix by replacing blkg_put() with percpu_ref_kill(), matching the pattern
used in blkg_destroy().
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Link: https://patch.msgid.link/20260715132407.1469777-1-cui.tao@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 267ec4d722 ("loop: fix partition scan race between udev and
loop_reread_partitions()") stopped disk_force_media_change() from
setting GD_NEED_PART_SCAN because loop devices with LO_FLAGS_PARTSCAN
rescan partitions explicitly. However, partitions can also be added
manually with BLKPG while LO_FLAGS_PARTSCAN is clear.
When such a loop device is detached, __loop_clr_fd() skips
bdev_disk_changed(). Without GD_NEED_PART_SCAN, reopening the unbound
device no longer performs the previous lazy cleanup, leaving dead
partition devices behind. A subsequent LOOP_CONFIGURE can then fail its
partition scan with -EBUSY, as seen in blktests loop/009 after loop/008.
Call bdev_disk_changed() unconditionally during __loop_clr_fd(). The
disk capacity is already zero and the release path holds open_mutex, so
this drops all partitions without rescanning the detached backing file.
The new blktests loop/013 case covers this sequence by adding a partition
with BLKPG without LO_FLAGS_PARTSCAN, detaching the loop device, and
checking that the partition is gone when the device is reopened.
Fixes: 267ec4d722 ("loop: fix partition scan race between udev and loop_reread_partitions()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202607150754.b660f5b9-lkp@intel.com
Signed-off-by: Daan De Meyer <daan@amutable.com>
Link: https://patch.msgid.link/20260715-b4-loop-partition-cleanup-v1-1-b9f59910cd1e@amutable.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_time_get_ns() populates the per-plug cached timestamp and then
returns it by re-reading the field:
if (!plug->cur_ktime) {
plug->cur_ktime = ktime_get_ns();
current->flags |= PF_BLOCK_TS;
}
return plug->cur_ktime;
This is problematic when the compiler emits the final
"return plug->cur_ktime" as a reload from memory, after PF_BLOCK_TS has
already been set.
Since the cached timestamp is now invalidated from finish_task_switch()
(fad156c2af "block: invalidate cached plug timestamp after task
switch"), a task preempted between setting PF_BLOCK_TS and that reload
has plug->cur_ktime zeroed by blk_plug_invalidate_ts() when it is
scheduled back in. The reload then returns 0.
A 0 handed back here is stored as a start timestamp -- e.g.
blk_account_io_start() writes it to rq->start_time_ns -- and later
subtracted from "now". blk_account_io_done() then adds (now - 0), i.e.
roughly the system uptime, to the per-group nsecs[] counters. On an
otherwise idle, healthy device this appears as sudden ~uptime-sized jumps
in the diskstats time fields (write_ticks/discard_ticks/time_in_queue).
The solution is to be explicit in our reads and writes to this field
that is preemption volatile. We also add a barrier() to ensure that any
setting of PF_BLOCK_TS is ordered to happen after the cur_ktime update.
This issue was discovered using AI-assisted kprobes looking for paths
that were leaking zeroed timestamps in a live system, based on the
observation that we were sometimes seeing uptime-sized jumps in kernel
exported counters. This was flagged by NodeDiskIOSaturation
prometheus alerts that started firing on all hosts post 7.1.3 kernel
upgrade, due to node-exporter now exporting a nonsensical
node_disk_io_time_weighted_seconds_total.
Fixes: fad156c2af ("block: invalidate cached plug timestamp after task switch")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Waychison <mike@waychison.com>
Assisted-by: Claude:claude-opus-4.8
Link: https://patch.msgid.link/20260715192950.2488921-1-mike@waychison.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix two runtime issues in the SCMI framework. Use full 64-bit division
when rounding range-based clock rates, avoiding divisor truncation and
a possible divide-by-zero on 32-bit systems. Rate-limit notification
queue-full warnings emitted from interrupt context to prevent printk
floods and prolonged system stalls during notification bursts. Also
correct a grammar error in the ARM_SCMI_POWER_CONTROL Kconfig help
text.
Fix the FF-A driver RX/TX buffer sizing logic to respect the maximum
buffer size advertised by firmware, while retaining compatibility with
older implementations that may reject PAGE_SIZE-rounded buffers.
Also fix a NULL pointer dereference in ffa_partition_info_get() by
rejecting NULL UUID strings before passing them to uuid_parse().
-----BEGIN PGP SIGNATURE-----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=J0zR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BUNp
-----END PGP SIGNATURE-----
Merge tag 'scmi-ffa-fixes-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI/FF-A fixes for v7.2
Fix two runtime issues in the SCMI framework. Use full 64-bit division
when rounding range-based clock rates, avoiding divisor truncation and
a possible divide-by-zero on 32-bit systems. Rate-limit notification
queue-full warnings emitted from interrupt context to prevent printk
floods and prolonged system stalls during notification bursts. Also
correct a grammar error in the ARM_SCMI_POWER_CONTROL Kconfig help
text.
Fix the FF-A driver RX/TX buffer sizing logic to respect the maximum
buffer size advertised by firmware, while retaining compatibility with
older implementations that may reject PAGE_SIZE-rounded buffers.
Also fix a NULL pointer dereference in ffa_partition_info_get() by
rejecting NULL UUID strings before passing them to uuid_parse().
* tag 'scmi-ffa-fixes-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Rate-limit queue-full warnings in IRQ context
firmware: arm_scmi: Use 64-bit division for clock rate rounding
firmware: arm_scmi: Grammar s/may needed/may be needed/
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The updated events were published in:
240735b7d8
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
d1bc6c1e8b
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
ce70546e9c
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
3aa49b0634
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
704ef43e4c
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
2ba9dec72a
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
084ecb869d
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
e479bd6768
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
13983cd535
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
b23ebe7bc2
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
7a14cc8fea
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The updated events were published in:
7a14cc8fea
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In evsel__tp_format(), when trace_event__tp_format*() returns an error,
IS_ERR() checks the local variable 'tp_format', but PTR_ERR() incorrectly
uses 'evsel->tp_format' which hasn't been assigned yet.
Fix this by using PTR_ERR(tp_format) to extract the error code from the
correct variable.
Fixes: 6c8310e838 ("perf evsel: Allow evsel__newtp without libtraceevent")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use MAP_FAILED instead of NULL to detect mmap errors, and fix the
slots_p variable name typo in the sample code.
Signed-off-by: Hongfu Li <lihongfu@kylinos.cn>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
New OMR MSRs are introduced for OMR events on DMR and NVL. Perf continues
to reuse the existing offcore_rsp attribute to encode the MSR value,
similar to existing OCR event handling.
Add the corresponding OMR MSR mappings in lookup_msr() so jevents can
translate these events and generate the correct offcore_rsp attribute.
Link: https://lore.kernel.org/all/20260114011750.350569-2-dapeng1.mi@linux.intel.com/
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove duplicate inclusion of util/term.h in builtin-test.c to clean up
redundant code.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When cpusetsize < cpumask_size(), hwprobe_get_cpus() did not fully
initialize its copy of the cpu mask, which could cause non-deterministic
results from the riscv_hwprobe syscall on a system with more than 8 CPUs
when the supplied cpu mask is empty. Address this by fully initializing
the cpu mask.
Fixes: e178bf146e ("RISC-V: hwprobe: Introduce which-cpus flag")
Signed-off-by: Mark Harris <mark.hsj@gmail.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@kernel.org>
Link: https://patch.msgid.link/20260714003056.73707-1-mark.hsj@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
ev variable is userspace controlled via event->attr.config and used
as an array index after bounds checking, but without speculation
barriers.
Add the missing array_index_nospec() call to prevent speculative
execution.
Cc: stable@vger.kernel.org
Fixes: 212188a596 ("[S390] perf: add support for s390x CPU counters")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently csum_partial() calls csum_copy() with copy=false and dst=NULL.
On machines without the vector facility, csum_copy() falls back to
cksm(dst, ...), causing the checksum to be calculated from address zero
instead of the source buffer.
The VX implementation already checksums data loaded from src. Make the
fallback do the same by passing src to cksm().
Fixes: dcd3e1de9d ("s390/checksum: provide csum_partial_copy_nocheck()")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
fw_log_from_bo() validates the tracing buffer header_size and that the
log fits within the BO, but never checks that log->size is at least
log->header_size. fw_log_print_buffer() then computes:
u32 data_size = log->size - log->header_size;
which underflows to a near-U32_MAX value when firmware reports a log whose
size is smaller than its header. That huge data_size defeats the
log_start/log_end bounds clamps added by commit dd1311bcf0 ("accel/ivpu:
Add bounds checks for firmware log indices"), so fw_log_print_lines() reads
far past the small real data region of the BO. A size of 0 also makes
fw_log_from_bo() advance the offset by 0, causing the callers to loop
forever on the same header.
Reject logs whose size is smaller than the header (which also rejects
size == 0).
Fixes: d4e4257afa ("accel/ivpu: Add firmware tracing support")
Cc: stable@vger.kernel.org
Signed-off-by: Jhonraushan <raushan.jhon@gmail.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260715074206.867712-1-raushan.jhon@gmail.com
User-controlled register indices from the ONE_REG ioctl are used to
index into the vector register buffer (v0..v31). Sanitize the calculated
offset with array_index_nospec() to prevent speculative out-of-bounds
access.
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260715030818.75657-1-min_halo@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
drmm_mutex_init() can fail while registering the managed cleanup action.
When that happens, drmm_add_action_or_reset() destroys the mutex before
returning the error. Continuing initialization would therefore leave the
debugfs GEM object list with an unusable lock.
Propagate the error as is already done for the other managed mutexes in
panthor_device_init().
Fixes: a3707f53eb ("drm/panthor: show device-wide list of DRM GEM objects over DebugFS")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260713082912.321021-1-lilinmao@kylinos.cn
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
panthor_fw_load() detects truncated firmware images, but jumps to the
common cleanup path without setting ret. If no previous error was recorded,
the function can return 0 and treat the invalid firmware as successfully
loaded.
Set ret to -EINVAL before leaving the truncated-image path.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260714163056.22329-1-osama.abdelkader@gmail.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages.
Fixes: 96c66e87de ("KVM/nVMX: Use kvm_vcpu_map when mapping the virtual APIC page")
Fixes: 3278e04925 ("KVM/nVMX: Use kvm_vcpu_map when mapping the posted interrupt descriptor table")
Fixes: fe1911aa44 ("KVM: nVMX: Use kvm_vcpu_map() to get/pin vmcs12's APIC-access page")
Reported-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix a bug where KVM will trigger a UAF if updating IOMMU IRTEs fails when
registering an IRQ-bypass producer.
- Ignore pending PV EOI instead of BUG()ing the host if the feature was
disabled by the guest.
- Fix nVMX bugs where KVM would run L1 with an L1-controlled CR3 after a
failed "late" consistency check when KVM is NOT using EPT.
- Disallow intra-host migration/mirroring of SNP VMs as KVM doesn't yet
support moving/mirroring SNP state.
- Fix a TOCTOU bug in KVM's handling of the "trusted" CPUID for TDX guests.
- Fix a NULL pointer deref in trace_kvm_inj_exception() where a change to the
core infrastructure missed KVM's unique (ab)use of __print_symbolic().
-----BEGIN PGP SIGNATURE-----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=+cUz
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-7.2-rc4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 7.2-rcN
- Fix a bug where KVM will trigger a UAF if updating IOMMU IRTEs fails when
registering an IRQ-bypass producer.
- Ignore pending PV EOI instead of BUG()ing the host if the feature was
disabled by the guest.
- Fix nVMX bugs where KVM would run L1 with an L1-controlled CR3 after a
failed "late" consistency check when KVM is NOT using EPT.
- Disallow intra-host migration/mirroring of SNP VMs as KVM doesn't yet
support moving/mirroring SNP state.
- Fix a TOCTOU bug in KVM's handling of the "trusted" CPUID for TDX guests.
- Fix a NULL pointer deref in trace_kvm_inj_exception() where a change to the
core infrastructure missed KVM's unique (ab)use of __print_symbolic().
- Move locking for kvm_io_bus_get_dev() into the caller, ensuring
race-free checks that the returned object is of the correct type
- Fix initialisation of the page-table walk level when relaxing
permissions
- Correctly update the XN attribute when relaxing permissions
- Fix the sign extension of loads from emulated MMIO regions
- Assorted collection of fixes for pKVM's FFA proxy, together with a
couple of FFA driver adjustments
-----BEGIN PGP SIGNATURE-----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=RmEk
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.2, take #2
- Move locking for kvm_io_bus_get_dev() into the caller, ensuring
race-free checks that the returned object is of the correct type
- Fix initialisation of the page-table walk level when relaxing
permissions
- Correctly update the XN attribute when relaxing permissions
- Fix the sign extension of loads from emulated MMIO regions
- Assorted collection of fixes for pKVM's FFA proxy, together with a
couple of FFA driver adjustments
- Fix an accounting buglet when reclaiming pages from a protected
guest
- Fix a bunch of architectural compliance issues when injecting a
synthesised exception, most of which were missing the PSTATE.IL bit
indicating a 32bit-wide instruction
- Another set of fixes addressing issues with translation of VNCR_EL2,
including corner cases where the guest point that register at a RO
page...
- Don't warn when trapping accesses to ZCR_EL2 from an L2 guest, as
that's not unexpected at all
- Address a bunch of races with LPI migration vs LPIs being disabled
- Fix a total howler of a bug combining FEAT_MOPS and NV, resulting in
exception returning in the wrong place...
- Coerce Fuad Tabba into a reviewer role, and may his Inbox catch
fire!
-----BEGIN PGP SIGNATURE-----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=mmLT
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.2, take #1
- Fix an accounting buglet when reclaiming pages from a protected
guest
- Fix a bunch of architectural compliance issues when injecting a
synthesised exception, most of which were missing the PSTATE.IL bit
indicating a 32bit-wide instruction
- Another set of fixes addressing issues with translation of VNCR_EL2,
including corner cases where the guest point that register at a RO
page...
- Don't warn when trapping accesses to ZCR_EL2 from an L2 guest, as
that's not unexpected at all
- Address a bunch of races with LPI migration vs LPIs being disabled
- Fix a total howler of a bug combining FEAT_MOPS and NV, resulting in
exception returning in the wrong place...
- Coerce Fuad Tabba into a reviewer role, and may his Inbox catch
fire!
Sun Jian says:
====================
bpf: Reject negative const offsets for buffer pointers
Reject negative effective offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses. Calculate the effective access start using signed arithmetic
to prevent unsigned access-end accounting from wrapping, and cover both
load-time rejection and the raw tracepoint writable attach-time path.
---
Changes in v5:
- Simplify __check_buffer_access() to reject a negative effective start
after confirming that var_off is constant. Validate the combined
offset instead of rejecting negative instruction offsets separately.
Drop the duplicate BPF_MAX_VAR_OFF check because pointer arithmetic
already bounds constant offsets, and remove the redundant size < 0
check.
- Switch the raw tracepoint writable attach tests from nbd_send_request
to bpf_testmod_test_writable_bare_tp, avoiding the NBD configuration
dependency and its false-pass condition.
- Split the attach coverage into named subtests and require
bpf_raw_tracepoint_open() to return -EINVAL.
- Add verifier coverage for a negative constant PTR_TO_BUF offset.
Changes in v4:
- Correct the Fixes tag to point to 022ac07508, where pointer offsets
were folded into reg->var_off.
- Drop the end > U32_MAX check, which is unreachable after bounding const
var_off with BPF_MAX_VAR_OFF while keeping instruction offsets and
access sizes bounded.
Changes in v3:
- Check constant var_off against +/-BPF_MAX_VAR_OFF before computing
the effective access range, matching the existing verifier pointer
offset convention.
- Keep explicit rejection of negative instruction offsets and keep
bounded negative constant var_off valid when the effective offset is
non-negative.
Changes in v2:
- Split the kernel fix and selftests into separate patches.
- Add an attach-time raw tracepoint writable test that exercises
max_tp_access against nbd_send_request's writable size.
- Adjust selftest formatting to use the 100 character line width.
Tested:
- ./test_progs -v -t verifier_raw_tp_writable
- ./test_progs -v -t verifier_ptr_to_buf
- ./test_progs -v -t raw_tp_writable_reject_bad_access
- ./test_progs -v -t raw_tp_writable_test_run
v4: https://lore.kernel.org/bpf/20260708090151.151729-1-sun.jian.kdev@gmail.com/
v3: https://lore.kernel.org/bpf/20260708040715.116680-1-sun.jian.kdev@gmail.com/
v2: https://lore.kernel.org/bpf/20260707060804.93561-1-sun.jian.kdev@gmail.com/
v1: https://lore.kernel.org/bpf/20260703035137.109608-1-sun.jian.kdev@gmail.com/
====================
Link: https://patch.msgid.link/20260714093846.18159-1-sun.jian.kdev@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Add verifier coverage for constant negative offsets on PTR_TO_TP_BUFFER
and PTR_TO_BUF pointers. Both programs adjust the buffer pointer by -8
and access it at offset zero, so the negative effective start must be
rejected at load time.
Switch the raw tracepoint writable attach checks from nbd_send_request
to bpf_testmod_test_writable_bare_tp, avoiding a dependency on the NBD
tracepoint. Keep the existing past-end case and add a case with a
negative var_off compensated by a positive instruction offset. The
effective start remains non-negative, so the program loads, but its
access end exceeds the writable context size and
bpf_raw_tracepoint_open() must return -EINVAL.
Cc: stable@vger.kernel.org # 5.2.0
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://patch.msgid.link/20260714093846.18159-3-sun.jian.kdev@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses, but it currently accepts a constant negative offset produced by
pointer arithmetic.
Commit 022ac07508 ("bpf: use reg->var_off instead of reg->off for
pointers") moved constant pointer offsets from reg->off to reg->var_off.
However, __check_buffer_access() continued to check only the instruction
offset. An access with reg->var_off equal to -8 and an instruction offset
of zero therefore passes verification.
For writable raw tracepoints, the access end is also calculated from the
unsigned reg->var_off.value. An eight-byte access starting at -8 wraps
the calculated end to zero, allowing the program to load and attach
without increasing max_tp_access.
After ensuring that reg->var_off is constant, calculate the effective
access start using signed arithmetic and reject it when it is negative.
Use the validated start to calculate the access end for both
PTR_TO_TP_BUFFER and PTR_TO_BUF.
Fixes: 022ac07508 ("bpf: use reg->var_off instead of reg->off for pointers")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: stable@vger.kernel.org # 5.2.0
Link: https://patch.msgid.link/20260714093846.18159-2-sun.jian.kdev@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
