Add a test validating that FIONREAD on a TCP socket in a sockmap
without a verdict program reports data pending in sk_receive_queue.
Signed-off-by: Mattia Meleleo <mattia.meleleo@coralogix.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260708-fionread-no-verdict-v3-2-b4ee31b3af53@coralogix.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
tcp_bpf_ioctl() answers SIOCINQ from psock->msg_tot_len, which only
counts bytes in ingress_msg. Without a stream/skb verdict program
nothing is diverted there: data stays in sk_receive_queue, so FIONREAD
returns 0 even though read() returns data.
Add tcp_inq() to the reported value when the psock has no verdict
program. The two queues are disjoint, so bytes redirected into
ingress_msg from other sockets stay correctly accounted through
msg_tot_len.
Remove unused sk_psock_msg_inq().
Fixes: 929e30f931 ("bpf, sockmap: Fix FIONREAD for sockmap")
Signed-off-by: Mattia Meleleo <mattia.meleleo@coralogix.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260708-fionread-no-verdict-v3-1-b4ee31b3af53@coralogix.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Check pm_runtime_force_resume() return value in resume. If it fails
(clock enable failure), return immediately since accessing hardware
registers on an unclocked device would cause a kernel panic.
The early return intentionally skips enable_irq() and
sdhci_disable_irq_wakeups() because the IRQ handler reads
SDHCI_INT_STATUS, which would also fault without clocks. The PM runtime
usage counter leak only affects this already-broken device instance and
is an acceptable tradeoff to preserve system stability.
Remove the return value check for mmc_gpio_set_cd_wake(host->mmc, false)
since disable_irq_wake() called internally always returns 0.
Also return 0 explicitly on the success path instead of propagating
stale return values.
Fixes: 676a838556 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Make pinctrl_pm_select_sleep_state() and mmc_gpio_set_cd_wake() failures
non-fatal in the suspend path. These failures only mean slightly higher
power consumption or missing CD wakeup capability, but should not block
system suspend.
Also change the function to always return 0 on the success path instead
of propagating non-fatal warning return values.
Fixes: 676a838556 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately.
Fixes: 676a838556 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning
occurs. This happens because the usdhc interrupt is not disabled during
system suspend when device_may_wakeup() returns false.
The sequence of events leading to this issue:
1. System enters suspend without disabling usdhc interrupt
(because device_may_wakeup() returns false for usdhc device)
2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt
3. WIFI sends a Card interrupt before usdhc has fully resumed
4. usdhc is still in runtime suspend state and cannot handle the
interrupt properly
5. The unhandled interrupt triggers "nobody cared" warning
Fix this by unconditionally disabling the usdhc interrupt during suspend
and re-enabling it during resume, regardless of the wakeup capability.
This ensures no interrupts are processed during the suspend/resume
transition.
Fixes: 676a838556 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
SDIO devices such as WiFi may keep power during suspend, so the MMC
core skips full card re-initialization on resume and directly restores
the host controller's ios timing to match the card. For DDR mode,
pm_runtime_force_resume() sets DDR_EN before the pin configuration is
restored from sleep state.
This is related to the SoC IP integration: switching pinctrl setting
(changing alt from GPIO to USDHC) impacts the internal loopback path.
If pinctrl configures the pad to GPIO function, once DDR_EN is set, the
DLL delay will be fixed based on the GPIO function loopback path. When
the pinctrl is later changed to USDHC function, the internal loopback
path changes, making the original fixed sample point no longer suitable
for the current loopback path. This causes persistent read CRC errors on
subsequent data transfers.
SD/eMMC running in DDR mode are unaffected as they are fully
re-initialized from legacy timing after resume.
Fix this by restoring the pinctrl state based on current timing mode
using esdhc_change_pinstate() before pm_runtime_force_resume(). This
ensures the correct pin configuration (e.g., 100/200MHz for UHS modes)
is applied before DDR_EN is set. Only restore for non-wakeup devices
since wakeup devices kept their active pin state during suspend.
Fixes: 676a838556 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the
top of the function and returns -EINVAL if either is not defined. This
prevents the default case from ever being reached, which means devices
with a sleep pinctrl state but without high-speed pin states (100mhz/
200mhz) can never restore their default pin configuration.
Move the IS_ERR checks for pins_100mhz and pins_200mhz into their
respective switch cases.
Fixes: 676a838556 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
sdhci_esdhc_imx_hwinit() unconditionally clears ESDHC_DLL_CTRL by
writing zero. For SDIO devices that keep power during system suspend
and operate in DDR mode, the card remains in DDR timing while the host
DLL override configuration is lost.
Extract the DLL override setup from esdhc_set_uhs_signaling() into
a helper esdhc_set_dll_override(), and call it on the resume path
when the card kept power and is using a DDR timing mode.
Fixes: 676a838556 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The tuning save/restore during system PM is conditioned on
mmc_card_wake_sdio_irq(), but this check is unrelated to whether
tuning values need to be preserved. The actual requirement is that
the card keeps power during suspend and the controller is a uSDHC.
SDIO devices using out-of-band GPIO wakeup maintain power during
suspend but do not set the SDIO IRQ wake flag. In this case the
tuning delay values are not saved/restored.
Remove the unnecessary mmc_card_wake_sdio_irq() condition from both
the suspend save and resume restore paths.
Fixes: c63d25cdc5 ("mmc: sdhci-esdhc-imx: Save tuning value when card stays powered in suspend")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Michal Luczaj says:
====================
bpf, sockmap: Fix sockmap leaking UDP socks
Fix for UDP sockets getting leaked during sockmap lookup/release.
Accompanied by selftests updates.
Two Sashiko's concerns to be addressed separately:
https://lore.kernel.org/bpf/20260626205814.BAC3C1F000E9@smtp.kernel.org/
Signed-off-by: Michal Luczaj <mhal@rbox.co>
---
Changes in v4:
- selftest: drop redundant `if (err)` [Sashiko]
- Link to v3: https://patch.msgid.link/20260702-sockmap-lookup-udp-leak-v3-0-ff8de8782468@rbox.co
Changes in v3:
- selftest: better error handling, ASSERT_*() macros [Sashiko]
- selftest: fix grammar, reorder patches [Kuniyuki]
- Link to v2: https://patch.msgid.link/20260626-sockmap-lookup-udp-leak-v2-0-7e7e201c951a@rbox.co
Changes in v2:
- selftest: drop the original, adapt old tests
- fix: change approach to rejecting unbound UDP [Kuniyuki]
- Link to v1: https://patch.msgid.link/20260623-sockmap-lookup-udp-leak-v1-0-05804f9308e4@rbox.co
To: Alexei Starovoitov <ast@kernel.org>
To: Daniel Borkmann <daniel@iogearbox.net>
To: Andrii Nakryiko <andrii@kernel.org>
To: Eduard Zingerman <eddyz87@gmail.com>
To: Kumar Kartikeya Dwivedi <memxor@gmail.com>
To: Martin KaFai Lau <martin.lau@linux.dev>
To: Song Liu <song@kernel.org>
To: Yonghong Song <yonghong.song@linux.dev>
To: Jiri Olsa <jolsa@kernel.org>
To: Emil Tsalapatis <emil@etsalapatis.com>
To: Shuah Khan <shuah@kernel.org>
To: John Fastabend <john.fastabend@gmail.com>
To: Jakub Sitnicki <jakub@cloudflare.com>
To: Jiayuan Chen <jiayuan.chen@linux.dev>
To: Eric Dumazet <edumazet@google.com>
To: Kuniyuki Iwashima <kuniyu@google.com>
To: Paolo Abeni <pabeni@redhat.com>
To: Willem de Bruijn <willemb@google.com>
To: "David S. Miller" <davem@davemloft.net>
To: Jakub Kicinski <kuba@kernel.org>
To: Simon Horman <horms@kernel.org>
To: Cong Wang <cong.wang@bytedance.com>
Cc: bpf@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
---
====================
Link: https://patch.msgid.link/20260707-sockmap-lookup-udp-leak-v4-0-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Update sockmap_listen to accommodate the recent change in sockmap that
rejects unbound UDP sockets.
TCP: Reject unbound and bound (unless established or listening).
UDP: Accept only bound sockets.
While at it, migrate to ASSERT_* and enforce reverse xmas tree.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-3-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
UDP sockets get SOCK_RCU_FREE set when (auto-)bound. This means
sk_is_refcounted(unbound) = true, while sk_is_refcounted(bound) = false.
Because sockmap accepts unbound UDP sockets, a BPF program can increment a
socket's refcount via lookup. If the socket is subsequently bound, the
transition from unbound to bound causes bpf_sk_release() to skip the
decrement of the refcount, causing a memory leak.
unreferenced object 0xffff88810bc2eb40 (size 1984):
comm "test_progs", pid 2451, jiffies 4295320596
hex dump (first 32 bytes):
7f 00 00 01 7f 00 00 01 d2 04 1b b7 04 d2 00 00 ................
02 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc bdee079d):
kmem_cache_alloc_noprof+0x557/0x660
sk_prot_alloc+0x69/0x240
sk_alloc+0x30/0x460
inet_create+0x2ce/0xf80
__sock_create+0x25b/0x5c0
__sys_socket+0x119/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0xa1/0x5f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead of special-casing for refcounted sockets, reject unhashed UDP
sockets during sockmap updates, as there is no benefit to supporting those.
This effectively reverts the commit under Fixes, with two exceptions:
1. sock_map_sk_state_allowed() maintains a fall-through `return true`.
2. In the spirit of commit b8b8315e39 ("bpf, sockmap: Remove unhash
handler for BPF sockmap usage"), the proto::unhash BPF handler is not
reintroduced.
Historical note: this issue is related to commit 67312adc96 ("bpf: reject
unhashed sockets in bpf_sk_assign").
Fixes: 0c48eefae7 ("sock_map: Lift socket state restriction for datagram sockets")
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-2-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Update sockmap_basic tests to bind sockets before they are used. This
accommodates the recent change in sockmap that rejects unbound UDP sockets.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-1-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
KVM RISC-V tracks guest local interrupt state with two bitmaps:
- irqs_pending: interrupts that should be visible to the guest
- irqs_pending_mask: interrupts whose pending state changed
The current code updates those bitmaps with independent atomic bitops
and assumes a multiple-producer, single-consumer protocol. That model
does not actually hold.
kvm_riscv_vcpu_sync_interrupts() is not a pure consumer. When the guest
changes guest-visible HVIP state, sync_interrupts() writes both
irqs_pending and irqs_pending_mask to reflect the new guest state back
into KVM state. As a result, irqs_pending and irqs_pending_mask form a
single logical state transition, but they are not updated atomically as
a pair.
This allows a race where a newly injected interrupt is lost. For
example:
CPU0 CPU1
---- ----
kvm_riscv_vcpu_set_interrupt(VS_SOFT)
set_bit(VS_SOFT, irqs_pending)
kvm_riscv_vcpu_sync_interrupts()
sees guest-cleared HVIP.VSSIP
sets irqs_pending_mask
clear_bit(IRQ_VS_SOFT, irqs_pending)
set_bit(VS_SOFT, irqs_pending_mask)
kvm_vcpu_kick()
After that interleaving, a later flush can update HVIP without VSSIP
even though a new virtual interrupt was injected. In practice, the
guest can remain blocked in WFI with work pending.
The same pending/mask protocol is shared by VS soft interrupts, PMU
overflow delivery, and AIA high interrupt synchronization, so the race
is not limited to one interrupt source.
Fix this by serializing all updates to irqs_pending and irqs_pending_mask
with a per-vCPU raw spinlock. This keeps the pending bit and the dirty
mask as one state transition across:
- set/unset interrupt
- guest HVIP sync
- interrupt flush to guest CSR state
- vCPU reset
- AIA CSR writes that clear dirty state
Use non-atomic bitmap operations while holding the lock. Hold the lock
across the AIA sync, flush, and pending checks as well, so both bitmap
words share the same serialization domain.
This intentionally replaces the existing lockless protocol instead of
trying to repair it with additional barriers. The problem is not memory
ordering on a single field; it is that two separate bitmaps encode one
shared state machine while both producers and sync paths can modify
them. A per-vCPU raw spinlock keeps the fix small, local, and suitable
for backporting.
Fixes: cce69aff68 ("RISC-V: KVM: Implement VCPU interrupts and requests handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xie Bo <xb@ultrarisc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260715020359.1521354-2-xb@ultrarisc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Punching a hole after a large buffered write may leave the range
reported as data. Reproduce it with:
xfs_io -f \
-c "pwrite -b 3m -S 0x61 0 3m" \
-c "fpunch 1m 1m" \
-c "seek -h 0" \
-c "seek -d 1m" \
/mnt/test/repro
Punching 1 MiB at offset 1 MiB should produce:
0 1 MiB 2 MiB 3 MiB
| DATA | HOLE | DATA | EOF
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the punched range can be
written back after the punch and refill the hole.
Fix this by flushing and waiting for dirty data in the punched range
before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA.
The xfstests generic/539 pass against Samba/ksmbd with this change.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace EXPORT_SYMBOL_FOR_MODULES() with EXPORT_SYMBOL_IF_KUNIT()
to mark the symbols as visible only if CONFIG_KUNIT is enabled.
Kunit test should import the namespace EXPORTED_FOR_KUNIT_TESTING to
use these marked symbols. This is the standard way for all KUnit
tests.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace EXPORT_SYMBOL_FOR_MODULES() with EXPORT_SYMBOL_IF_KUNIT()
to mark the symbols as visible only if CONFIG_KUNIT is enabled.
Kunit test should import the namespace EXPORTED_FOR_KUNIT_TESTING to
use these marked symbols. This is the standard way for all KUnit
tests.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 7dadeaa6e8 ("sched: Further restrict the preemption
modes"), powerpc always has CONFIG_PREEMPTION because only
CONFIG_PREEMPT and CONFIG_PREEMPT_LAZY are possible, even in
dynamic preemption mode (see sched_dynamic_mode).
As a consequence, need_irq_preemption() is always true and can be
removed.
And because commit bee25f97ad ("powerpc: Enable GENERIC_ENTRY
feature") includes linux/irq-entry-common.h which already declares
sk_dynamic_irqentry_exit_cond_resched static key, asm/preempt.h
becauses useless and can be removed.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2bf10a0afffefb6aca44bf2f864cc17471a80e31.1781870889.git.chleroy@kernel.org
When using device tree CPU features (dt-cpu-ftrs), the kernel bypasses
the traditional cputable-based CPU identification and instead derives
CPU features from the device tree's "ibm,powerpc-cpu-features" node
provided by firmware.
However, CPU_FTR_P11_PVR is a kernel-internal feature flag used to
identify Power11 and later processors, and is not represented in the
device tree's ISA feature set. While ISA v3.1 support (indicated by
CPU_FTR_ARCH_31) is present on both Power10 and Power11, the
CPU_FTR_P11_PVR flag is specifically needed by code that must
distinguish between Power10 and Power11 processors.
Without this flag set, code that checks for Power11 using
cpu_has_feature(CPU_FTR_P11_PVR) will incorrectly return false on
Power11+ systems using dt-cpu-ftrs, leading to incorrect behavior.
This issue manifests specifically in powernv environments (bare-metal
or QEMU TCG with powernv machine type), where skiboot/OPAL firmware
provides the "ibm,powerpc-cpu-features" node, causing the kernel to
use dt-cpu-ftrs. The issue does not affect pseries guests, where SLOF
firmware does not provide this node, causing the kernel to fall back
to the traditional cputable path (identify_cpu) which correctly sets
CPU_FTR_P11_PVR during PVR-based CPU identification.
In powernv TCG guests, the missing flag causes KVM code to trigger
warnings when attempting to create KVM guests, as cpu_features shows
0x000c00eb8f4fb187 (missing bit 53) instead of the correct
0x002c00eb8f4fb187 (with bit 53 set).
Fix this by setting CPU_FTR_P11_PVR for all processors with
PVR >= PVR_POWER11 when ISA v3.1 support is detected in
cpufeatures_setup_start(). This approach ensures forward
compatibility with future processor generations.
Fixes: 96e266e3bc ("KVM: PPC: Book3S HV: Add Power11 capability support for Nested PAPR guests")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260614173437.26352-1-amachhiw@linux.ibm.com
mask_user_address() incorrectly checks for CONFIG_E500 instead of
CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on
E500 hardware. Fix the check to use the correct name.
Fixes: 861574d51b ("powerpc/uaccess: Implement masked user access")
Cc: stable@vger.kernel.org # 7.0+
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Fixes: 861574d51b ("powerpc/uaccess: Implement masked user access")
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260615233729.29386-1-enelsonmoore@gmail.com
It was observed that /proc/stat had very large value for one ore more
CPUs. It was more visible after recent code simplifications around
cpustats.
System has 240 CPUs.
cat /proc/uptime;
194.18 46500.55
cat /proc/stat
cpu 5966 39 837032887 4650070 164 185 100 0 0 0
cpu0 108 0 837030890 19109 24 4 23 0 0 0
Since uptime is 194s, system time of each CPU can't be more than 19400.
Sum of system time of all CPUs can't be more than 19400*240 4656000.
In fact huge value is close to mftb(). Note mftb doesn't reset on powerVM
when the LPAR restart. It only resets when whole system resets. The same
issue exists for kexec too.
This happens since starttime is not setup at init time. Once it is set
then subsequent vtime_delta will return the right delta.
Fix it by initializing the starttime during CPU initialization. This
fixes the large times seen.
cat /proc/uptime; cat /proc/stat
15.78 3694.63
cpu 6035 35 1347 369479 23 144 49 0 0 0
cpu0 19 0 38 1508 0 1 14 0 0 0
Now, system time is reported as expected.
Fixes: cf9efce0ce ("powerpc: Account time using timebase rather than PURR")
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260605124329.377533-1-sshegde@linux.ibm.com
Add fsl,ifc to mpc85xx_common_ids so that of_platform_bus_probe
creates a platform device for the IFC node even without 'simple-bus'
in its compatible property. On P1010 and similar platforms the IFC
node is a direct child of the root, so it must be explicitly matched
to be populated.
Fixes: 0bf51cc9e9 ("powerpc: dts: mpc85xx: remove "simple-bus" compatible from ifc node")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260604043309.91280-1-rosenp@gmail.com
When CONFIG_RISCV_USER_CFI is enabled, the CFI version of the vDSO, has
a CFI landing pad instruction at the start of __vdso_rt_sigreturn. This
breaks libgcc's unwinding code which matches on the first two
instructions. Other unwinders that rely on similar instruction matching
may also be affected.
Since __vdso_rt_sigreturn is reached as part of signal-return handling
rather than via an indirect call/jump from userspace, it does not need a
CFI landing pad. Remove it and restore the instruction sequence expected
by existing unwinding code.
This matches what was done on arm64 in commit 9a96428557 ("arm64:
vdso: Don't prefix sigreturn trampoline with a BTI C instruction") for a
similar issue.
Cc: stable@vger.kernel.org
Fixes: 37f57bd3fa ("arch/riscv: compile vdso with landing pad and shadow stack note")
Co-authored-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patch.msgid.link/20260623204058.498120-1-aurelien@aurel32.net
[pjw@kernel.org: fixed comment style]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit()
unconditionally, but only aie2_dev_ops defines that callback.
aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user
AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer
call and oopses the kernel. AIE4 submits work through a mapped user queue
and doorbell, not this ioctl path.
Reject the submission early with -EOPNOTSUPP when the device provides no
cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Cc: stable@vger.kernel.org
Found by 0sec automated security-research tooling (https://0sec.ai).
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260713173030.87541-3-doruk@0sec.ai
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Cc: stable@vger.kernel.org
Found by 0sec automated security-research tooling (https://0sec.ai).
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260713173030.87541-2-doruk@0sec.ai
MediaTek mt65xx family SoCs have no auto restart, however, they still
support the WRRD mode in the hardware. Because auto_restart is set to 0,
the WRRD mode will be never enabled, leading to read errors.
Fix this by removing auto_restart check from the WRRD enable path.
Fixes: b492183652 ("i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD")
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260709-6572-6595-i2c-v2-1-b2fb8510d1d3@protonmail.com
The commit fixing the overlayfs mmap() and mprotect() access checks
failed to skip the execmem check in __file_map_prot_check() for the case
where the "mounter check" is being performed. This check should be
performed only against the credentials of the task that is calling
mmap()/mprotect(), since it doesn't pertain to the file itself, but
rather just gates the ability of the calling task to get an executable
memory mapping in general.
The purpose of the "mounter check" is to guard against using an
overlayfs mount to gain file access that would otherwise be denied to
the mounter. For execmem this is not relevant, as there is no further
file access granted based on it (notice that the file's context is not
used as the target in the check), so checking it also against the
mounter credentials would be incorrect.
Fix this by passing a boolean to [__]file_map_prot_check() and
selinux_mmap_file_common() that indicates if we are doing the "mounter
check" and skiping the execmem check in that case. Since this boolean
also indicates if we use current_cred() or the mounter cred as the
subject, also remove the "cred" argument from these functions and
determine it based on the boolean and the file struct.
Cc: stable@vger.kernel.org
Fixes: 82544d36b1 ("selinux: fix overlayfs mmap() and mprotect() access checks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
If devm_platform_get_and_ioremap_resource() returns an error,
mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to
get the error code. This results in a use-after-free.
Save the error code before freeing tmp_res.
Fixes: b5b5b32081 ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260714150808.85045-1-xuanqiang.luo@linux.dev
Zero check unused SQE fields addr3 and pad2 for unlinkat. They're
not needed now, but could be used sometime in the future.
Signed-off-by: Yi Xie <xieyi@kylinos.cn>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/20260714030306.64820-1-xieyi@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The provided-buffer validation fix deferred freeing a cached iovec
until validation completed. However, the deferred free uses arg->iovs.
After a grow, that points to the newly allocated array. Without a grow,
it points to the cached array that remains in use.
This leaves the caller with a dangling iovec in both cases and can
result in repeated frees. Only free org_iovs when arg->iovs actually
replaced it.
Fixes: cd053d788c ("io_uring: fix dangling iovec after provided-buffer bundle grow failure")
Assisted-by: Codex:gpt-5.3-codex-spark
Signed-off-by: Jaeyeong Lee <iostreampy@proton.me>
Link: https://patch.msgid.link/20260712142612.188695595-iostreampy@proton.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
drm_gpusvm_get_pages() only stored the local dpagemap into
svm_pages->dpagemap on the success path. If a later page failed (e.g.
-EOPNOTSUPP when ctx->allow_mixed is false) and jumped to err_unmap,
svm_pages->dpagemap was still NULL, so __drm_gpusvm_unmap_pages() skipped
device_unmap() and leaked the device mappings already created.
Assign svm_pages->dpagemap when the first device page is mapped so the
err_unmap path can device_unmap() those mappings.
This issue was found by Sashiko AI review.
Fixes: f70da6f99d ("drm/gpusvm: pull out drm_gpusvm_pages substructure")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-4-honghuan@amd.com
In a mixed range: ctx->allow_mixed dpagemap is not NULL while some entries
are system pages. The unmap loop used:
dma_unmap_page(...);
else if (dpagemap && dpagemap->ops->device_unmap)
dpagemap->ops->device_unmap(...);
When use_iova is true the first condition is false for system pages,
so they fall through to device_unmap() and a system DMA address is
handed to the device specific unmap callback, risking invalid accesses
or state corruption.
Key the branch off addr->proto instead: system pages only need an explicit
dma_unmap_page() in the non IOVA case, IOVA system pages are already torn
down by the single dma_iova_destroy(), and only genuine device pages
reach device_unmap().
This issue was found by Sashiko AI review.
Fixes: 37ad039fb3 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-3-honghuan@amd.com
dma_iova_try_alloc() reserves IOVA for the entire range, but in a mixed
range only the system pages are linked (their total size is state_offset)
while device pages never touch the IOVA state. dma_iova_destroy() with
state_offset only frees the linked part, permanently leaking the IOVA
reserved for the device pages and eventually exhausting the IOVA space.
Unlink the linked system-page portion and free the whole reserved IOVA
instead. On the get_pages() error path state_offset is 0 (no page linked,
dma_addr[0] unpopulated), so skip the unlink and just free the reservation;
this also avoids reading the uninitialized dma_addr[0].dir there.
Allocate the dma_addr array with the zeroing kvzalloc_objs() so every entry
has a well-defined value.
This issue was found by Sashiko AI review.
Fixes: 37ad039fb3 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260701062800.409248-2-honghuan@amd.com
regression fixes) or quirks accumulated since the last update.
Some highlights:
* USB-audio:
- Fix per-channel volume imbalance regression for sticky mixers
- Validate input packet length in caiaq driver
- Quirks for iBasso DC-Elite, Musical Fidelity M6s DAC, and Redragon
H510-PRO Wireless headset
* HD-audio:
- Fix a long-standing bug of cached processing coefficient verbs
- Make cs35l56 driver failing with missing firmware
- Fix cirrus codec Kconfig dependency, update MAINTAINERS
- Remove unneeded mic bias threshold override on Conexant
- Realtek codec quirks for ASUS ROG Ally X (headphone & mic), Dell
QCM1255, Legion Pro 7, HP/Victus laptops, Framework, and TongFang
laptops
* ASoC:
- Add Eliza audio support on Qualcomm sc8280xp/sm8250 SoCs
- Fix SDCA linker error with ACP on AMD
- A few fixes for AMD ACP PCI driver
- Add TAS2783 support on AMD ACP 7.0 platforms
- Reset RT712-SDCA codec to fix silent headphone issue
- Soft reset S/PDIF datapath on Meson AIU FIFO
- Jack report fix for cs42l43
- TAS2562 shutdown GPIO clearing fix
- Sidecar amps quirk for Lenovo laptop in SOF SDW driver
* Misc:
- Drop redundant mod_devicetable.h includes from FireWire drivers
- Fix memory leak and format mismatch in mixer kselftest
-----BEGIN PGP SIGNATURE-----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=3e+T
-----END PGP SIGNATURE-----
Merge tag 'sound-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific fixes (including
regression fixes) or quirks accumulated since the last update. Some
highlights:
USB-audio:
- Fix per-channel volume imbalance regression for sticky mixers
- Validate input packet length in caiaq driver
- Quirks for iBasso DC-Elite, Musical Fidelity M6s DAC, and Redragon
H510-PRO Wireless headset
HD-audio:
- Fix a long-standing bug of cached processing coefficient verbs
- Make cs35l56 driver failing with missing firmware
- Fix cirrus codec Kconfig dependency, update MAINTAINERS
- Remove unneeded mic bias threshold override on Conexant
- Realtek codec quirks for ASUS ROG Ally X (headphone & mic), Dell
QCM1255, Legion Pro 7, HP/Victus laptops, Framework, and TongFang
laptops
ASoC:
- Add Eliza audio support on Qualcomm sc8280xp/sm8250 SoCs
- Fix SDCA linker error with ACP on AMD
- A few fixes for AMD ACP PCI driver
- Add TAS2783 support on AMD ACP 7.0 platforms
- Reset RT712-SDCA codec to fix silent headphone issue
- Soft reset S/PDIF datapath on Meson AIU FIFO
- Jack report fix for cs42l43
- TAS2562 shutdown GPIO clearing fix
- Sidecar amps quirk for Lenovo laptop in SOF SDW driver
Misc:
- Drop redundant mod_devicetable.h includes from FireWire drivers
- Fix memory leak and format mismatch in mixer kselftest"
* tag 'sound-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (36 commits)
ALSA: usb-audio: Add delay quirk for iBasso DC-Elite
ALSA: hda: conexant: Remove mic bias threshold override
ALSA: hda/realtek: Fix speakers on Legion Pro 7 16ARX8H with codec SSID 17aa:38a7
ALSA: hda/realtek: Fix speakers on MECHREVO WUJIE Series
ALSA: hda: cs35l56: Fail if wmfw file is missing
ALSA: usb-audio: Skip DSD quirk for Musical Fidelity M6s DAC
ALSA: hda: MAINTAINERS: Fix missing cirrus* file reference
ALSA: hda/cirrus_scodec: Make Kconfig visible if KUNIT
ALSA: hda/realtek: Add quirk for TongFang X6xx45xU
ALSA: hda/realtek - Fixed Headphone noise issue for Dell QCM1255
ASoC: tas2562: fix deprecated 'shut-down' GPIO always cleared after lookup
ASoC: cs42l43: Correct report for forced microphone jack
ASoC: qcom: sc8280xp: Add support for Eliza
ASoC: dt-bindings: qcom,sm8250: Add Eliza sound card
ASoC: dt-bindings: qcom: Add Eliza LPASS macro codecs
ALSA: hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx
ALSA: hda/realtek - Add quirk for HP Victus 15-fa0xxx (MB 8A50)
ALSA: usb-audio: Add quirk for Redragon H510-PRO Wireless headset
ASoC: amd: ps: replace bitwise OR with logical OR in IRQ return check
ASoC: amd: ps: fix wrong ACP version string in pci_request_regions()
...
-----BEGIN PGP SIGNATURE-----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=A35I
-----END PGP SIGNATURE-----
Merge tag 'for-7.2-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix root structure leak after relocation error
- fix optimization when checksums are read from commit root, fall back
to checksum root during relocation
- in tree-checker, validate length of inode reference in items
- validate properties before setting them
- validate free space cache entries on load
- transaction abort fixes
- fix printing of internal trees as signed numbers
- add error messages after critical lzo compression errors
* tag 'for-7.2-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: print-tree: print header owner as signed
btrfs: decentralize transaction aborts in create_reloc_root()
btrfs: tree-checker: validate INODE_REF's namelen
btrfs: lzo: add error message for invalid headers
btrfs: fallback to transaction csum tree on a commit root csum miss
btrfs: fix root leak if its reloc root is unexpected in merge_reloc_roots()
btrfs: reject free space cache with more entries than pages
btrfs: fix transaction abort logic in btrfs_fileattr_set()
btrfs: validate properties before setting them
When the interrupt status register reads zero, the handler should
return IRQ_NONE instead of IRQ_HANDLED. What the return value
actually feeds into is the spurious interrupt accounting in
note_interrupt(): falsely claiming IRQ_HANDLED defeats the "irq XX:
nobody cared" detection, so a stuck interrupt source would never be
caught.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Mukesh Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ef8b623f45d4e430721e46572c2598d882044aed.1783667875.git.xiaopei01@kylinos.cn
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the
interrupt-driven block-read state machine rejects it as -EPROTO. Worse,
it returns without a NACK+STOP: the next receive cycle has already
started, so the target keeps holding SDA and the bus stays stuck until a
power cycle of this i2c controller.
Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to
2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte
path. The dummy byte is discarded; block-read callers only consume
buf[0..count-1].
Reading I2DR has likewise already armed the next byte on the
count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting
with -EPROTO; otherwise the failing transfer's STOP cannot complete and
the bus stays held.
The atomic path regressed earlier (v3.16) and is fixed separately; this
patch covers only the v6.13 state-machine rework.
Fixes: 5f5c2d4579 ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Cc: <stable@vger.kernel.org> # v6.13+
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260713-for-upstream-i2c-lx2160-fix-v1-v3-2-073ac9e103a5@free.fr
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range.
Fixes: 8e8782c715 ("i2c: imx: add SMBus block read support")
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Cc: <stable@vger.kernel.org> # v3.16+
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260713-for-upstream-i2c-lx2160-fix-v1-v3-1-073ac9e103a5@free.fr
Wolfram Sang has decided that a decade-plus of I2C was enough and
is moving on to new things.
Thank you, Wolfram, for your years of dedication and for keeping
the bus in line. Your legacy is now officially cemented in the
CREDITS file.
Suggested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20260625163221.183414-1-andi.shyti@kernel.org
Commit 16df4cc63c ("drm/i915/display: Use ceiling division for NV12
UV surface offset calculation") computes the UV (chroma) surface
start/size as ceiling(half of Y plane start/size) directly from the
U16.16 fixed-point source rectangle:
x = fp_16_16_to_int_ceil(fp_16_16_div2(src.x1));
For a single pipe the source coordinates are integers, so this is
correct.
(UV start = ceiling(half of Y plane start)).
With bigjoiner + a plane scaler the picture changes. The pipe boundary
is a fixed integer destination pixel, but the plane's position and the
scaler ratio are arbitrary, so drm_rect_clip_scaled() maps the seam back
to a *fractional* per-pipe source. For a 1280->2407 upscaled NV12 plane
crossing the seam:
master src: width = 1204 * 1280/2407 = 640.265899, x1 = 0
joiner src: width = 1203 * 1280/2407 = 639.734115, x1 = 640.265884
The luma path floors this to an integer (src.x1 >> 16 = 640), but the
UV path takes ceiling(640.265884 / 2) = ceil(320.13) = 321. The Y plane
then starts at column 640 while the UV plane starts at 321*2 = 642,
pushing the chroma read one column past the 640-wide chroma surface on
the joiner secondary:
[CRTC:382:pipe C] PLANE ATS fault
[CRTC:382:pipe C][PLANE:267:plane 1C] fault (CTL=0x81009400, ...)
The spec "Y plane start" is the integer pixel the luma surface actually
programs (640), not the pre-floor fixed-point value (640.27). Convert
the Y plane start/size to integer first - matching skl_check_main_surface()
- and then apply the ceiling. This is a no-op for the integer (non-joiner)
case and yields the correct, in-bounds chroma offset for the fractional
joiner seam:
before fix after fix
master 1B: x=0 w=321 x=0 w=320 -> [0, 320)
slave 1C: x=321 w=320 x=320 w=320 -> [320, 640)
The two halves now tile the 640-wide chroma plane exactly and the ATS
fault is gone.
Assisted-by: GitHub-Copilot:Claude-Opus-4.8
Fixes: 16df4cc63c ("drm/i915/display: Use ceiling division for NV12 UV surface offset calculation")
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20260618181837.687302-1-vidya.srinivas@intel.com
(cherry picked from commit 0c59cc7824)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When an instruction guest-page-fault targets a GPA that is not backed
by any memslot, KVM has no MMIO emulation path for the fetch. Load and
store guest-page faults can be routed through MMIO emulation, but an
instruction fetch has no data payload or access size for userspace to
complete in the same way.
Treat this case as an architectural access fault in the guest. On bare
metal, fetching from an inaccessible physical address raises an
instruction access fault for the supervisor to handle through its trap
vector. Reflect EXC_INST_ACCESS back to the guest so the guest observes
the same class of exception rather than leaving the fetch as a
host-handled condition.
stval contains the virtual address of the portion of the instruction that
caused the fault, while sepc points to the beginning of the instruction.
Signed-off-by: Qingwei Hu <qingwei.hu@bytedance.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260707122548.281685-1-qingwei.hu@bytedance.com
Signed-off-by: Anup Patel <anup@brainfault.org>
When use_dma_read is enabled, the IRQ handler unconditionally overwrites
irq_status with the return value of get_dma_status(). For write operations,
DMA status returns 0 since no DMA read is in progress, causing irq_status
to become 0. The subsequent completion signal is never triggered and the
write operation times out with -ETIMEDOUT:
cadence-qspi f1010000.spi: Indirect write timeout
spi-nor spi0.1: operation failed with -110
Fix this by separating the DMA completion path from the write interrupt
path. If get_dma_status() indicates DMA read completion, signal completion
and return immediately. Otherwise, preserve the original irq_status so that
write completion interrupts are correctly recognized and signalled.
Fixes: aac733a966 ("spi: cadence-qspi: Fix style and improve readability")
Signed-off-by: Srikanth Boyapally <srikanth.boyapally@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260708045148.2993313-1-srikanth.boyapally@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dw_spi_dma_wait_tx_done() polls dw_spi_dma_tx_busy(), which only checks
DW_SPI_SR_TF_EMPT. An empty TX FIFO merely means the last data word has
been moved into the shift register; the transfer is not complete on the
bus until DW_SPI_SR_BUSY is also cleared. As a result the wait can
return while the controller is still shifting out the final word.
Any caller that tears down or reconfigures the controller right after
the transfer can then lose the tail of the transfer.
The memory-operation path in spi-dw-core.c already waits for both
DW_SPI_SR_BUSY == 0 and DW_SPI_SR_TF_EMPT == 1. Use the same completion
condition in the DMA path so the transfer is guaranteed to be finished
on the bus before the wait returns.
Signed-off-by: Wang YuWei <1973615295@qq.com>
Link: https://patch.msgid.link/tencent_4EA7B5C94669ED4C38A5F6C1C9126E5D9106@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With commit 890e5198a6 ("can: raw: use bitfields to store flags in
struct raw_sock") the formerly separate integer values have been integrated
into a single bitfield. This led to a read-modify-write operation when
changing a flag in raw_setsockopt() which now needs a locking to prevent
concurrent access.
Instead of adding a lock/unlock hell in each of the flag manipulations this
patch introduces a wrapper for a new raw_setsockopt_locked() function
analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c
Fixes: 890e5198a6 ("can: raw: use bitfields to store flags in struct raw_sock")
Reported-by: Eulgyu Kim <eulgyukim@snu.ac.kr>
Closes: https://lore.kernel.org/linux-can/20260503112200.22727-1-eulgyukim@snu.ac.kr/
Tested-by: Eulgyu Kim <eulgyukim@snu.ac.kr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Tested-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260504111928.41856-1-socketcan@hartkopp.net
[mkl: use Closes tag instead of Link]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
LOLLM noticed a discrepancy between the bmbt level checks in the libxfs
bmbt code vs. the inode repair code. We do actually allow a bmbt root
that proclaims to have a height of XFS_BM_MAXLEVELS.
Cc: stable@vger.kernel.org # v6.8
Fixes: e744cef206 ("xfs: zap broken inode forks")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
