FSCTL_DUPLICATE_EXTENTS_TO_FILE changes the target file extents on the
server, but the client does not refresh the target AllocationSize/i_blocks.
Callers can observe or use the wrong st_blocks value immediately after the
clone, before a later attribute revalidation corrects it.
For example, create a reflinked file with a leading hole:
xfs_io -f -c "pwrite -S 0x61 0 64k" src
touch dst
chmod 600 dst
xfs_io -c "reflink src 0 1m 64k" dst
mkswap dst
swapon dst
The file still has a hole after mkswap:
/mnt/scratch/dst:
[0..7]: allocated
[8..2047]: hole
[2048..2175]: allocated
The server also reports only the allocated ranges:
server dst size=1114112 blocks=144
but the client reported EOF-derived blocks:
client dst size=1114112 blocks=2176
and swapon succeeded:
swapon_result=success
/mnt/scratch/dst 1.1M 0B -1
So EOF-derived i_blocks can let a sparse reflinked file pass the CIFS
swapfile hole check.
Fix this by querying FILE_ALL_INFORMATION on the target handle after a
successful duplicate extents request. Update i_blocks from AllocationSize
and keep the refreshed target inode attributes valid so a following stat
does not immediately revalidate again.
If the query fails, mark the cached inode attributes stale so a later
getattr can refresh them.
This also fixes the xfstests generic/370 regression introduced by the
i_blocks accounting change, as tested on a Samba "vfs objects = btrfs"
share.
Fixes: 99cd0a6eeb ("smb/client: do not account EOF extension as allocation")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently in smb3_simple_fallocate_range(), a 1 MB buffer is allocated
using kzalloc(). Under heavy memory fragmentation, a contiguous 1 MB block
of physical memory (an order-8 allocation) may not be available,
causing the allocation to fail.
This failure was observed during xfstests generic/013 on a 4GB RAM
test machine running fsstress:
fsstress: page allocation failure: order:8,
mode:0x40dc0(GFP_KERNEL|__GFP_ZERO|__GFP_COMP),
nodemask=(null),cpuset=/,mems_allowed=0
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
warn_alloc+0x163/0x190
__alloc_pages_slowpath.constprop.0+0x71b/0x12f0
__alloc_frozen_pages_noprof+0x2f6/0x340
alloc_pages_mpol+0xb6/0x170
___kmalloc_large_node+0xb3/0xd0
__kmalloc_large_noprof+0x1e/0xc0
smb3_simple_falloc.isra.0+0x62b/0x960
cifs_fallocate+0xed/0x180
vfs_fallocate+0x165/0x3c0
__x64_sys_fallocate+0x48/0xa0
do_syscall_64+0xe1/0x640
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Node 0 Normal: 3375*4kB ... 7*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB
Since this scratch buffer does not require physically contiguous memory,
switch the allocation to kvzalloc(). This retains the performance
benefits of kmalloc() under normal conditions, while gracefully falling
back to virtually contiguous memory when physical allocation fails.
Fixes: 966a3cb7c7 ("cifs: improve fallocate emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Tested-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=2fc6, idProduct=f0b5
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iBasso DC-Elite
usb 1-1: Manufacturer: iBasso
usb 1-1: SerialNumber: CTUA171130B
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217D8FF419F24378196FCEFD2FA2@TYUPR06MB6217.apcprd06.prod.outlook.com
Remove the mic bias current comparator threshold override (NID 0x1c,
verb 0x320, value 0x010) from Conexant codec driver.
This override was originally intended to support volume up/down controls on
headsets with inline remote controls, but it causes microphone detection
failures on some headsets with impedance less than 1k ohm.
After consulting with the vendor's engineers, it was confirmed that this
setting is board-specific and should be handled by BIOS/firmware rather
than the generic codec driver, especially since inline remote support
is not currently implemented.
Fixes: 7aeb259086 ("ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260713100329.306892-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More bug fixes, many found by tools:
- Protect from a possible DOS with certain RMPP traffic patterns
- Correct mac address comparison so CMA works properly on IB
- Some crashes in irdma around memory registration
- Uninitialized value in erdma and mana
- Wrong order setting up a QP in SIW allowed a network packet to reach an
unready QP struct
- Catch math overflows in hns and irdma
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCalTdtwAKCRCFwuHvBreF
YQ44AP47MlX9CTlu5GtEVmjeQzIuYVAp0pNIDbU0XSqZa3BSQgD/Z7X3Ib8HIr7+
pnGCDpwqkXHHiHKsgIgjRIwSZFxWkws=
=G+7p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"More bug fixes, many found by tools:
- Protect from a possible DOS with certain RMPP traffic patterns
- Correct mac address comparison so CMA works properly on IB
- Some crashes in irdma around memory registration
- Uninitialized value in erdma and mana
- Wrong order setting up a QP in SIW allowed a network packet to
reach an unready QP struct
- Catch math overflows in hns and irdma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Prevent overflows in memory contiguity checks
RDMA/siw: publish QP after initialization
RDMA/hns: Fix potential integer overflow in mhop hem cleanup
RDMA/core: Fix memory leak in __ib_create_cq() on invalid cqe
RDMA/mana_ib: initialize err for empty send WR lists
RDMA/erdma: initialize ret for empty receive WR lists
RDMA/irdma: Prevent user-triggered null deref on QP create
RDMA/irdma: Prevent rereg_mr for non-mem regions
RDMA/cma: Fix hardware address comparison length in netevent callback
RDMa/mlx5: Avoid frame overflow warning
IB/mad: Drop unmatched RMPP responses before reassembly
MGMT_EV_DEVICE_DISCONNECTED carries a reason field which is defined to
be one of MGMT_DEV_DISCONN_* (0x00..0x05). hci_disconn_complete_evt()
converts the HCI error with hci_to_mgmt_reason(), but two other paths
pass the raw HCI error straight through:
hci_cs_disconnect() -> cp->reason
mgmt_connect_failed() -> status
The latter is reached whenever the adapter is powered off or suspended:
hci_disconnect_all_sync() aborts every link with
HCI_ERROR_REMOTE_POWER_OFF, hci_disconnect_sync() deliberately does not
wait for HCI_EV_DISCONN_COMPLETE for that reason, so that
hci_abort_conn_sync() finishes the connection off through
hci_conn_failed() instead.
As a result userspace sees an out of range reason:
@ MGMT Event: Device Disconnected (0x000c) plen 8
BR/EDR Address: 8C:A9:6F:2C:51:46
Reason: Reserved (0x15)
bluetoothd: btd_bearer_disconnected() Unknown disconnection value: 21
bluetoothd: device_disconnected() Unknown disconnection value: 21
Export hci_to_mgmt_reason() and use it in both places, so that a power
off is reported as MGMT_DEV_DISCONN_REMOTE rather than as the raw
HCI_ERROR_REMOTE_POWER_OFF (0x15).
Fixes: d47da6bd4c ("Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED")
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
qca_controller_memdump() allocates qca->qca_memdump before processing
the first dump packet. For a sequence-zero packet it then disables IBS,
marks memdump collection active, and reads the advertised dump size.
If the controller reports a zero dump size, the error path frees the
local qca_memdump object and returns without clearing qca->qca_memdump
or undoing the collection state. A later memdump work item initializes
its local pointer from qca->qca_memdump and skips allocation when that
pointer is non-NULL, so it can operate on freed memory. The stale
collection and IBS-disabled flags can also leave waiters or later
transmit handling blocked behind an aborted dump.
Clear the saved pointer and memdump state before returning from the
invalid-size path, matching the cleanup used when hci_devcd_init() fails.
A static analysis checker reported the stale memdump state, and manual
source review confirmed the invalid-size failure path.
Fixes: 06d3fdfcdf ("Bluetooth: hci_qca: Add qcom devcoredump support")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn_params_lookup requires hdev->lock be held, otherwise the list
iteration or param access is not safe.
Hold hdev->lock for params lookups in hci_sync.
Fixes: c530569adc ("Bluetooth: hci_core: Introduce HCI_CONN_FLAG_PAST")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF. Use of hci_conn in hci_sync callbacks also
needs to hold refcount to avoid UAF.
Take appropriate locks for hci_conn lookups, and take refcount for
hci_conn pointers stored in mgmt_pending_cmd so that the pointer stays
valid.
When accessing conn->state, ensure hdev->lock is held to avoid data
race.
Fixes: 7b445e220d ("Bluetooth: MGMT: Fix holding hci_conn reference while command is queued")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF.
Take hdev->lock for hci_conn lookup and hci_abort_conn(). Don't use RCU
to ensure the conn is fully initialized at this point.
Fixes: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Using RCU-protected pointers outside the critical sections without
refcount is incorrect and may result to UAF.
Extend critical section to cover both hci_conn_hash lookup and use of
the returned conn.
Add surrounding rcu_read_lock() also when return value is not used, in
preparation for RCU lockdep requirement to hci_lookup_le_connect().
This avoids concurrent deletion of the conn before we are done
dereferencing it.
Also, make sure to hold hdev->lock when accessing hdev->accept_list.
Fixes: 6d0417e4e1 ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch.
Fixes: db33c77ddd ("Bluetooth: btrtl: Create separate module for Realtek BT driver")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter
update changes an existing LE central connection. The queued work currently
stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later
LOAD_CONN_PARAM request can clear disabled parameters and free that entry
before hci_cmd_sync_work() runs the queued callback.
Do not keep the borrowed hci_conn_params pointer in queued work. Queue the
hci_conn instead and hold a reference until the queued callback completes.
When the work runs, revalidate that the connection is still present, look
up the current hci_conn_params entry, and cancel the update if userspace
removed that entry while the work was pending.
Copy the interval values from the current params entry under hdev->lock,
then drop the lock and keep using hci_le_conn_update_sync() to issue the
update.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth]
Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
kasan_report+0xe0/0x110
conn_update_sync+0x2a/0xf0 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Allocated by task 466:
hci_conn_params_add+0xa6/0x240 [bluetooth]
load_conn_param+0x4e1/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Freed by task 474:
kfree+0x313/0x590
hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth]
load_conn_param+0x4bf/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Fixes: 0ece498c27 ("Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connection")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is
"while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed
int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a
size_t (12), so "length" is converted to size_t and any firmware-supplied
"length" < 12 makes the subtraction wrap to a huge value. The loop body
then reads a 12-byte struct tlv_type_nvm past the end of the short
vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it).
Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both
operands are non-negative, so it no longer underflows and a "length" too
small for one record correctly skips the loop.
BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421)
Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52
Workqueue: hci0 hci_power_on
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617)
qca_uart_setup (drivers/bluetooth/btqca.c:948)
qca_setup (drivers/bluetooth/hci_qca.c:2029)
hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438)
hci_dev_open_sync (net/bluetooth/hci_sync.c:5227)
hci_power_on (net/bluetooth/hci_core.c:920)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Fixes: 2e4edfa1e2 ("Bluetooth: qca: add missing firmware sanity checks")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reported-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The trace_kvm_inj_exception tracepoint takes as arguments the exception
vector, whether the exception has an error code (and subsequently, the
error code), and whether it is being reinjected. Because '0' is a valid
error code, KVM uses __print_symbolic() to format the error code as a
string to avoid printing the error code entirely if the exception doesn't
have an error code (see commit 21d4c575eb ("KVM: x86: Print error code
in exception injection tracepoint iff valid").
KVM's abuse of __print_symbolic() was all fine and dandy, until commit
754e38d2d1 ("tracing: Use explicit array size instead of sentinel
elements in symbol printing") reworked the printing to avoid terminating
the arrays with NULL/0 values, and missed KVM's clever use of not-quite
empty array of symbols.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 0 PID: 791 Comm: less Not tainted 7.2.0-rc2 #401 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:strlen+0x0/0x20
Call Trace:
<TASK>
trace_seq_puts+0x18/0x80
trace_print_symbols_seq+0x68/0xa0
trace_raw_output_kvm_inj_exception+0x64/0xf0 [kvm]
s_show+0x47/0x110
seq_read_iter+0x2a5/0x4c0
seq_read+0xfd/0x130
vfs_read+0xb6/0x330
? vfs_write+0x2f2/0x3f0
ksys_read+0x61/0xd0
do_syscall_64+0xb7/0x570
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff283714862
</TASK>
Simply drop the dummy array entirely, so that __print_symbolic() generates
a truly empty array.
Signed-off-by: Daniel Paziyski <danielpaziyski@gmail.com>
Fixes: 754e38d2d1 ("tracing: Use explicit array size instead of sentinel elements in symbol printing")
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260710134055.16432-1-danielpaziyski@gmail.com
[sean: massage changelog, add splat, add Fixes, cc stable]
Signed-off-by: Sean Christopherson <seanjc@google.com>
All config and core registers of the KVM RISC-V ONE_REG interface are
expected to be always available to the KVM user-space and the KVM
get-reg-list selftest assumes these registers to be as base registers.
Currently, the Zicbo[m|z|p] block size config registers are only
available when corresponding ISA extension is present on the host
which breaks the above expectation. In fact, KVM get-reg-list selftest
fails when any of the Zicbo[m|z|p] ISA extension is not present on
host. To address this issue, drop the ISA extension checks from
kvm_riscv_vcpu_get/set_reg_config() and copy_config_reg_indices()
functions.
Fixes: 031f9efafc ("KVM: riscv: Add KVM_GET_REG_LIST API support")
Fixes: a044ef7104 ("RISC-V: KVM: use ENOENT in *_one_reg() when extension is unavailable")
Fixes: 48e2febcda ("RISC-V: KVM: Provide UAPI for Zicbop block size")
Fixes: cf05b059d5 ("RISC-V: KVM: Introduce common kvm_riscv_isa_check_host()")
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260706181522.2003922-1-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The gstage_tlb_flush() in the kvm_riscv_gstage_set_pte() is not needed
when an invalid G-stage PTE becomes valid and Svvptc extension is available
because new valid PTEs become visible to the page-table walker within a
bounded time.
Assisted-by: YuanSheng: deepseek-v4-pro
Co-developed-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Dylan.Wu <fredwudi0305@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260701075239.95542-1-fredwudi0305@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The PMU SBI handler passes the guest argument registers directly to
the PMU start/stop helpers:
kvm_riscv_vcpu_pmu_ctr_start(vcpu, cp->a0, cp->a1, cp->a2, ...)
kvm_riscv_vcpu_pmu_ctr_stop(vcpu, cp->a0, cp->a1, cp->a2, ...)
which map to:
unsigned long ctr_base
unsigned long ctr_mask
unsigned long flags
Thus cp->a1 is a single unsigned long ctr_mask, not a bitmap array
sized for RISCV_MAX_COUNTERS.
On RV32, RISCV_MAX_COUNTERS is 64 while BITS_PER_LONG is 32. Using
for_each_set_bit() with RISCV_MAX_COUNTERS can therefore make
find_next_bit() access bits beyond the storage of ctr_mask on RV32.
Limit the scan to BITS_PER_LONG. The requested counter range is already
validated by kvm_pmu_validate_counter_mask(), so this preserves RV64
behavior and avoids an out-of-bounds bitmap read on RV32.
Fixes: 0cb74b65d2 ("RISC-V: KVM: Implement perf support without sampling")
Signed-off-by: Shengwen Cheng <shengwen1997.tw@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260626054051.3360865-1-shengwen1997.tw@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Should probe fail for HW_VOTER type power domains, this driver was
unconditionally trying to perform cleanup for DIRECT_CTL domains,
but only after checking if the target domain is powered on... with
the DIRECT_CTL scpsys_domain_is_on() code again.
And there's more: the scpsys_domain_is_on() function is also being
unconditionally used in the probe path, for any power domain that
has flag MTK_SCPD_KEEP_DEFAULT_OFF!
This bug was never experienced by anyone because the HWV domains
never failed probe, and because none of those is declared with the
aforementioned flag - but it's still something critical.
In order to fix this, add a check for MTCMOS Type and, based on
that, call the correct functions for an "is on" check, and also
do the same for the cleanup path, calling the correct functions
for the "power off" action.
For the latter, since there's a call to pm_genpd_remove() right
before calling power_off, be cautious and add a variation of the
power off functions (with a _internal suffix) for those to get a
pointer to scpsys_domain instead of one to generic_pm_domain as,
even if that's still working, this is way too much fragile and
would break at some point.
Fixes: 88914db077 ("pmdomain: mediatek: Add support for Hardware Voter power domains")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Some units of the Lenovo Legion Pro 7 16ARX8H (82WS) report codec
subsystem ID 17aa:38a7 instead of 17aa:38a8. Since only 38a8 has a
codec SSID quirk, these machines fall through to the PCI SSID match
17aa:386f (Legion Pro 7i 16IAX7) and get ALC287_FIXUP_CS35L41_I2C_2,
which probes the Cirrus amplifiers of the Intel variant. The TI
TAS2781 amplifier (ACPI TIAS2781:00) present on this AMD variant is
never bound and the internal speakers remain silent.
Add a codec SSID quirk for 17aa:38a7 pointing to
ALC287_FIXUP_TAS2781_I2C, mirroring the existing 38a8 entry.
Tested on a Legion Pro 7 16ARX8H (82WS, BIOS LPCN62WW): with the codec
SSID overridden to 17aa:38a8 via the HDA patch loader, the TAS2781
amplifier binds and the internal speakers work.
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Laine <damien.laine@gmail.com>
Link: https://patch.msgid.link/20260712213708.1835469-1-damien.laine@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal speakers on the MECHREVO WUJIE Series are silent,
while the headphone output works correctly.
The BIOS reports NID 0x1b on the Realtek ALC233 codec as
unconnected with pin configuration 0x411111f0. However, the pin
is connected to an internal speaker.
Overriding NID 0x1b with 0x90170150 makes the HDA generic parser
detect both 0x14 and 0x1b as speaker outputs and restores internal
speaker playback.
Add a pin configuration fixup for the affected PCI SSID c011:1d05.
Tested on a MECHREVO WUJIE Series laptop with board
WUJIE Series-Lark4-LNL and firmware EM_LNL326_V1.0.23.
Signed-off-by: Chen Bowen <hicbowen@gmail.com>
Link: https://patch.msgid.link/20260710133409.16641-1-hicbowen@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fail cs35l56_hda_fw_load() and log an error if it didn't find a wmfw file
and the BIOS didn't patch the firmware already. Also remove a section of
code from cs35l56_hda_request_firmware_files() that attempted to find a
.bin if a .wmfw was not found.
The CS35L56 ROM can only provide default audio in SoundWire mode. A wmfw
is needed to enable I2S audio. Also none of the customer-specific .bin
files are compatible with the ROM firmware. So a .wmfw file is always
required.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260709161211.686498-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Salvador reported that the recent fix for applying the DSD quirk to
Musical Fidelity devices broke for his M6s DAC model (2772:0502).
Although this is basically a firmware bug, the model in question is
fairly old, and no further firmware update can be expected, so it'd be
better to address in the driver side.
As an ad hoc workaround, skip the DSD quirk for this device by adding
an empty quirk entry of 2772:0502; this essentially skips the later
DSD quirk entry by the match with the vendor 2772.
Fixes: da3a7efff6 ("ALSA: usb-audio: Update for native DSD support quirks")
Reported-by: Salvador Blaya <tiniebla6@gmail.com>
Closes: https://lore.kernel.org/CAOdyq+qFaqCh=tK_wNnA64hv5pQuA1Y09ANxQ=xK8yR-t4mf9Q@mail.gmail.com
Tested-by: Salvador Blaya <tiniebla6@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260709095614.1418838-1-tiwai@suse.de
spufs_mem_mmap_access() computes the local store offset as
address - vma->vm_start, but bounds-checks it against vma->vm_end
instead of the local store size. On 64-bit, offset is always well
below vma->vm_end, so the clamp never fires and len stays unbounded
against the LS_SIZE buffer returned by ctx->ops->get_ls().
Reject offsets at or beyond LS_SIZE and clamp len to the remaining
space, mirroring the guard already used by spufs_mem_mmap_fault() and
spufs_ps_fault().
Fixes: a352894d07 ("spufs: use new vm_ops->access to allow local state access from gdb")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/SYBPR01MB7881EE775E8B51C09F5A29E7AF152@SYBPR01MB7881.ausprd01.prod.outlook.com
"cache_strategy=" is meaningless and confusing on unencoded EROFS
filesystems; gate it on compressed images only since it's now possible
after commit 7cef3c8341 ("erofs: separate plain and compressed
filesystems formally").
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
diagnose_failure_lnl() read VPU_HW_BTRS_MTL_INTERRUPT_STAT instead of
VPU_HW_BTRS_LNL_INTERRUPT_STAT, which on LNL and newer parts is a
different register with a different bit layout, so failure diagnostics
decoded the wrong register and reported a bogus error cause.
Read the LNL interrupt status register instead.
Fixes: 8a27ad81f7 ("accel/ivpu: Split IP and buttress code")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260710101331.1899505-1-karol.wachowski@linux.intel.com
kvm_sbi_fwft_set() applies the caller's flags to conf->flags before
invoking the set() callback. If the callback returns an error, the LOCK
bit persists and the feature becomes permanently locked without its value
ever being changed.
Move the flags assignment after the callback so LOCK takes effect only
on success.
Fixes: 6b72fd1705 ("RISC-V: KVM: add support for FWFT SBI extension")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260624130238.524706-1-suunj1331@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
kvm_riscv_mmu_ioremap() currently tops up its on-stack page-table
cache via kvm_mmu_topup_memory_cache(), which allocates up to
KVM_ARCH_NR_OBJS_PER_MEMORY_CACHE (32) objects per topup.
ioremap only consumes non-leaf page-table pages, at most
pgd_levels - 1 (1 to 4) per call, and for contiguous mappings
within the same huge page the non-leaf pages are allocated once
and reused by subsequent pages. Topping up to 32 objects therefore
triggers many unnecessary GFP_KERNEL_ACCOUNT allocations on every
call, all of which are freed when the function returns. In hot
paths (such as vCPU migration), this creates avoidable allocator
churn and wastes CPU cycles.
Use __kvm_mmu_topup_memory_cache() with a capacity of pgd_levels so
the on-stack cache is sized to the maximum demand of a single
mapping. This removes the redundant allocations and reduces per-call
overhead without changing behavior.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20260610093922.51617-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument.
Fixes: 62936009f3 ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
clear_interrupt_bit() ignores the bit argument and performs a
read-write-back of the entire INTPR register. If INTPR uses standard
Write-1-to-Clear semantics, this clears every pending interrupt bit,
not just the intended one. Coalesced interrupts (e.g. DMAT + NEWFP)
would be cleared together, silently losing the second event.
Write only the specific bit to clear so that other pending interrupts
are preserved.
Fixes: 62936009f3 ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Replace irq_of_parse_and_map() with platform_get_irq() in both
sata_dwc_dma_init_old() and sata_dwc_probe(). This is the preferred
way to obtain IRQs for platform devices and provides better error
reporting. Remove the now-unnecessary #include <linux/of_irq.h>.
irq_of_parse_and_map() requires irq_dispose_mapping(), which is missing.
Also fix unused variable when CONFIG_SATA_DWC_OLD_DMA is disabled.
Fixes: 62936009f3 ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
sata_dwc_enable_interrupts() is called before platform_get_irq() and
ata_host_activate(), leaving the SATA controller's interrupt mask
enabled without a registered handler. If a later step fails (irq
request, phy init, etc.) or if the controller asserts an interrupt
during probe, the irq line may fire with no handler, causing a
spurious interrupt storm.
Move sata_dwc_enable_interrupts() after ata_host_activate() so that
interrupts are only unmasked once the handler is registered and the
core is fully initialized.
Fixes: 62936009f3 ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
If phys_disk->in_reset is set, the function returns directly without
undoing the resources acquired for the command. Add the missing error
cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping
the SCSI command, and dropping the outstanding IOACCEL command count
before returning.
Fixes: c5dfd10641 ("scsi: hpsa: correct device resets")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20260622160028.1240496-1-haoxiang_li2024@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path
returns -ENOSPC without releasing the reference obtained via
kref_get_unless_zero() earlier in the function. All other error paths
correctly drop the reference. This causes a permanent reference leak on the
io_to_abort object.
Additionally, the abort_in_progress flag is left set to true on this path,
which means future abort attempts for the same I/O will immediately return
-EINPROGRESS even though the abort was never submitted, effectively
blocking recovery.
Fix this by adding the missing kref_put() call and reset abort_in_progress
to false, matching the cleanup done in the efct_hw_wq_write() failure path
below.
Cc: stable@vger.kernel.org
Fixes: 63de51327a ("scsi: elx: efct: Hardware I/O and SGL initialization")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://patch.msgid.link/20260611053037.63756-1-vulab@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an
unsolicited FCP command. If the command has an unsupported additional
CDB, the function returns -EIO before handing the IO to the SCSI layer.
Free the allocated IO before returning from this error path.
Fixes: f45ae6aac0 ("scsi: elx: efct: Unsolicited FC frame processing routines")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://patch.msgid.link/20260622075844.832871-1-haoxiang_li2024@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers.
Fixes: 6eb045e092 ("scsi: core: avoid host-wide host_busy counter for scsi_mq")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Link: https://patch.msgid.link/20260615174630.11492-1-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_alloc_registration(). When the parameter list spans more than
one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses
vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual
address backing iport_ptr is torn down and every subsequent dereference is
a use-after-free read of the unmapped region.
Keep the parameter list mapped until iport_ptr is no longer needed: drop
the early transport_kunmap_data_sg() and unmap once on the success path,
right before returning. The error paths already unmap through the existing
"if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs
on every post-map error exit because buf is no longer cleared early. Only
reads of the mapping happen while spinlocks are held; the map and unmap
calls remain outside any lock. The sibling caller
core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it
and is left unchanged.
Fixes: 4949314c72 ("target: Allow control CDBs with data > 1 page")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260610042245.35473-1-hexlabsecurity@proton.me
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move()
hand the raw PERSISTENT RESERVE OUT parameter buffer to
target_parse_pr_out_transport_id() without telling it how many bytes are
valid. For an iSCSI TransportID (FORMAT CODE 01b),
iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with
an unbounded strstr() (and on the error path prints the name with a further
unbounded "%s"). An initiator can submit a TransportID whose iSCSI name
contains neither a ",i,0x" substring nor a NUL terminator, filling the
parameter list to its end, so the scan runs off the end of the buffer.
When the parameter list spans more than one page the buffer is a multi-page
vmap (transport_kmap_data_sg()), so the over-read walks into the trailing
vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It
is reachable by any fabric that delivers a PR OUT to a device exported
through an iSCSI TPG, including a guest via vhost-scsi.
Pass the number of received bytes down to the parser and validate the iSCSI
TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up
front: reject it if it is below the spc4r17 minimum or larger than the
received buffer, then bound the separator search, the ISID walk and the
name copy by that length. This is the length check the callers already
perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len
against tpdl, core_scsi3_emulate_register_and_move() validates it against
data_length), moved ahead of the scan. Also drop the unbounded "%s" of the
unterminated name.
Add per-format explicit name-length checks before copying into i_str,
rather than silently truncating with min_t: for FORMAT CODE 00b reject if
the descriptor body (tid_len - 4 bytes) cannot fit in
i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion
(from &buf[4] up to the separator) cannot fit. Both checks make the bounds
intent explicit at each format branch.
While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x"
separator sits at the very end of the descriptor: that leaves an empty ISID
and points the returned port nexus pointer at buf + tid_len, one past the
descriptor, which the registration code (__core_scsi3_locate_pr_reg(),
__core_scsi3_alloc_registration()) then dereferences as the ISID string --
the same over-read of the parameter buffer for a malformed descriptor.
Fixes: c66ac9db8d ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260611-b4-disp-9f20739e-v6-1-f6630e2aae44@proton.me
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The TPM character devices expose a sequential command/response
interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE
enabled.
After a command leaves a response pending, pread(fd, buf, 16, 0x1400)
passes 0x1400 as *off to tpm_common_read(). The transfer length is
bounded by response_length, but the offset is used unchecked when
forming data_buffer + *off. A sufficiently large offset therefore causes
an out-of-bounds heap read through copy_to_user() and, if the copy
succeeds, an out-of-bounds zero-write through the following memset().
Positional I/O does not provide coherent semantics for this interface.
An arbitrary pread offset cannot represent how much of a response has
been consumed sequentially. The write callback always stores a command
at the start of data_buffer, while pwrite() does not update file->f_pos
and can leave the sequential read cursor stale.
Call nonseekable_open() from both open handlers. This removes
FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to
fail with -ESPIPE before reaching the TPM callbacks, and explicitly
marks the files non-seekable. Normal read() and write() continue to use
the existing sequential f_pos cursor, leaving the response state machine
unchanged.
Tested on Linux 6.12 with KASAN and a swtpm TPM2 device:
- sequential partial reads returned the complete response
- pread() and preadv() with offset 0x1400 returned -ESPIPE
- pwrite() and pwritev() with offset zero returned -ESPIPE
- the pending response remained intact after the rejected operations
- a subsequent normal command/response cycle completed normally
- no KASAN report was produced.
Fixes: 9488585b21 ("tpm: add support for partial reads")
Link: https://lore.kernel.org/all/20260710090217.191289-1-yong010301@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jaewon Yang <yong010301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some staging driver fixes for 7.2-rc3 for some reported bugs in
the vme_user and rtl8723bs drivers. These include:
- many rtl8723bs OOB fixes for when connecting to "bad" wifi hosts
- vme_user bugfixes to correctly validate some user-provided data
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNT5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynpAACgja2SsuFbsIOiofjEjyXZnjE55IcAoNkmr/yp
XkMNN2/oQHc1faGW47cm
=jtsV
-----END PGP SIGNATURE-----
Merge tag 'staging-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes for 7.2-rc3 for some reported bugs
in the vme_user and rtl8723bs drivers. These include:
- many rtl8723bs OOB fixes for when connecting to "bad" wifi hosts
- vme_user bugfixes to correctly validate some user-provided data
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop
staging: rtl8723bs: fix OOB write in HT_caps_handler()
staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()
staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()
staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop
staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()
staging: vme_user: fix location monitor leak in tsi148 bridge
staging: vme_user: fix location monitor leak in fake bridge
staging: vme_user: bound slave read/write to the kern_buf size
staging: rtl8723bs: don't drop short TX frames in _rtw_pktfile_read()
Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for reported
problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNPWw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yltzACdFC2/ouvc1ea1jGFBP1ZN4lKU6gAAn1ak5lRK
30pEMSmJwYteOj8AlpuE
=ZIWT
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
Here are some small tty/serial/vt fixes for 7.2-rc3 that resolve some
reported problems. Included in here are:
- vt spurious modifier issue that showed up in -rc1 (reported a bunch)
- 8250 driver bugfixes
- msm serial driver bugfix
- max310x serial driver bugfix
All of these have been in linux-next with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNRQg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymuIQCdGVJwWd6MdGl+vzAO5GhJA7ndewEAoIbyOkQ2
zriM/Mn6vzKP81QKvGRY
=Gmi1
-----END PGP SIGNATURE-----
Merge tag 'tty-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial/vt fixes for 7.2-rc3 that resolve some
reported problems. Included in here are:
- vt spurious modifier issue that showed up in -rc1 (reported a
bunch)
- 8250 driver bugfixes
- msm serial driver bugfix
- max310x serial driver bugfix
All of these have been in linux-next with no reported issues"
* tag 'tty-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Ignore flow control on suspend/resume with no_console_suspend
serial: 8250_mid: Disable DMA for selected platforms
serial: 8250_omap: clear rx_running on zero-length DMA completes
vt: fix spurious modifier in CSI/cursor key sequences
serial: msm: Disable DMA for kernel console UART
serial: max310x: implement gpio_chip::get_direction()
Here are a number of small USB driver fixes for many reported issues.
Included in here are:
- usb serial driver corruption and use-after-free fixes
- usb gadget rndis bugfixes for malicious/buggy host connections
- typec driver fixes for a load of different tiny reported issues
- typec mux driver revert for a broken patch in -rc1
- usb gadget driver fixes for many different reported problems
- new usb device quirks added
- usbip tool fixes and some core usbip fixes as well
- dwc3 driver fixes for minor issues
- xhci driver fixes for reported problems
- lots of other tiny usb driver fixes for many tiny issues
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNSkw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynUlACgtUhZOR/MsYMcNbKJe9vk0iG35+AAnjrhznd4
OJqmb+1vVQ7xDm2fq+gz
=Ky4T
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for many reported issues.
Included in here are:
- usb serial driver corruption and use-after-free fixes
- usb gadget rndis bugfixes for malicious/buggy host connections
- typec driver fixes for a load of different tiny reported issues
- typec mux driver revert for a broken patch in -rc1
- usb gadget driver fixes for many different reported problems
- new usb device quirks added
- usbip tool fixes and some core usbip fixes as well
- dwc3 driver fixes for minor issues
- xhci driver fixes for reported problems
- lots of other tiny usb driver fixes for many tiny issues
All of these have been in linux-next with no reported issues"
* tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: core: ratelimit cabling message
usb: misc: usbio: fix disconnect UAF in client teardown
Revert "usb: typec: mux: avoid duplicated mux switches"
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
usb: ucsi: huawei_gaokun: move typec_altmode off stack
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
usb: typec: tcpm: Fix VDM type for Enter Mode commands
usb: typec: ucsi: cancel pending work on system suspend
usb: typec: class: drop PD lookup reference
usb: typec: ps883x: Fix DP+USB3 configuration
usb: xhci: Fix sleep in atomic context in xhci_free_streams()
xhci: sideband: fix ring sg table pages leak
usb: gadget: udc: Fix use-after-free in gadget_match_driver
usb: dwc3: run gadget disconnect from sleepable suspend context
usb: sl811-hcd: disable controller wakeup on remove
usb: typec: anx7411: use devm_pm_runtime_enable()
usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup()
USB: misc: uss720: unregister parport on probe failure
usb: gadget: function: rndis: add length check for header
usb: gadget: function: rndis: add length check to response query
...
- Fix missing array_index_nospec() call in diag310 memory topology code
to prevent speculative execution with a user controlled array index
- Fix get_align_mask() return type to match vm_unmapped_area_info
align_mask, avoiding possible truncation for future larger masks
- Remove empty zcrypt CEX2 files left over after CEX2 and CEX3 driver
removal
- Add build salt to the vDSO so it gets a unique build id, similar to
the kernel and modules
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmpT1poACgkQjYWKoQLX
FBgEkAf/f/qKKj7ojuIsHoPpgTun3csqbGJqOnLShYaX3itzN8wbT5m0JGbKAKfv
BMpu5LSC5auGF6fvRhfJM/RbSX2LgEOMBtjx9kSAFFbNtkzu5urzZ1QFQyJ+DZq+
0Ny8E1ozB5dlizqqIIzijyAXbMt5vDrlaPKUh+LJMlkA0OY9NUt+KLah3soEexli
Oh18KMzrmik/SOr0qCuxrUa0Z0B5i2q8mp9AaS9/YaOHeuBspm4G47XKMHg4UMg8
yMb7ofaX4isgRYXrDsNUkLGe/KPkwntWnU7EVVJH/u4ZkjUlwEyIH0lhp6BnVlte
LSQ4742J4lxHa2Y+sQDxzFgaFr6reA==
=FOvG
-----END PGP SIGNATURE-----
Merge tag 's390-7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix missing array_index_nospec() call in diag310 memory topology code
to prevent speculative execution with a user controlled array index
- Fix get_align_mask() return type to match vm_unmapped_area_info
align_mask, avoiding possible truncation for future larger masks
- Remove empty zcrypt CEX2 files left over after CEX2 and CEX3 driver
removal
- Add build salt to the vDSO so it gets a unique build id, similar to
the kernel and modules
* tag 's390-7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Add build salt to the vDSO
s390/zcrypt: Remove the empty file
s390/mm: Fix type mismatch in get_align_mask().
s390/diag: Add missing array_index_nospec() call to memtop_get_page_count()
- Avoid a null pointer deference in machine_kexec_prepare() that the
IMA subsystem can trigger
- Bypass libc in part of the ptrace_v_not_enabled kselftest to avoid
noise from child atfork handlers that libc might run
- Include Kconfig support for UltraRISC SoCs, already referenced by
some device drivers; and enable it in our defconfig
- Fix the build of the rseq kselftest for RISC-V by borrowing a
technique from the KVM and S390 kselftests that includes
arch-specific header files from tools/arch/<arch>/include
- Fix some memory leaks in the RISC-V vector ptrace kselftests
- Clean up some DT bindings and hwprobe documentation
-----BEGIN PGP SIGNATURE-----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=P9QE
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The most notable change involves the rseq kselftest common Makefile
(as it is not RISC-V-specific). The basic approach in the patch
appears similar to one used in the KVM and S390 selftests (grep for
LINUX_TOOL_ARCH_INCLUDE and SUBARCH), and the rseq kselftests pass a
quick build test on x86 after this.
- Avoid a null pointer deference in machine_kexec_prepare() that the
IMA subsystem can trigger
- Bypass libc in part of the ptrace_v_not_enabled kselftest to avoid
noise from child atfork handlers that libc might run
- Include Kconfig support for UltraRISC SoCs, already referenced by
some device drivers; and enable it in our defconfig
- Fix the build of the rseq kselftest for RISC-V by borrowing a
technique from the KVM and S390 kselftests that includes
arch-specific header files from tools/arch/<arch>/include
- Fix some memory leaks in the RISC-V vector ptrace kselftests
- Clean up some DT bindings and hwprobe documentation"
* tag 'riscv-for-linus-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
selftests/riscv: ptrace: Fix memory leak of regset_data in vector tests
selftests/rseq: Fix a building error for riscv arch
riscv: defconfig: enable ARCH_ULTRARISC
riscv: add UltraRISC SoC family Kconfig support
riscv: hwprobe.rst: Document EXT_ZICFISS and EXT_ZICFILP
riscv: hwprobe.rst: Make indentation consistent
dt-bindings: riscv: sort multi-letter Z extensions alphanumerically
selftests: riscv: Bypass libc in inactive vector ptrace test
riscv: Prevent NULL pointer dereference in machine_kexec_prepare()
. fix broken local SoC IO accesses
-----BEGIN PGP SIGNATURE-----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=3/dn
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-fixes-on-top-off-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"Fix incorrectly updated local SoC IO access function names.
Testing didn't pick them up because there was no specific defconfig
for these particular SoC parts. New defconfigs will be introduced in
the next merge cycle to remedy that"
* tag 'm68knommu-fixes-on-top-off-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: fix breakage of missed IO access updates
- Free field in error path of synthetic event parse
In __create_synth_event() the field was allocated but was not freed in the
error path.
- Fix ring_buffer_event_length() on 8 byte aligned architectures
On architectures with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y,
the ring_buffer_event_length() may return the wrong size. This
is because archs with that config set will always use the "big
event meta header" as that is 8 bytes keeping the payload 8 bytes
aligned, even when a 4 byte header could hold the size of the
event.
But ring_buffer_event_length() doesn't take this into account and only
subtracts 4 bytes for the meta header in the length when it should have
subtracted 8 bytes.
- Have osnoise wait for a full rcu synchronization on unregister
osnoise_unregister_instance() used to call synchronize_rcu() before
freeing its copy of the instance but was switched to kfree_rcu().
The osniose tracer has code that traverses the instances that it
uses, and inst is just a pointer to that instance. By using kfree_rcu()
instead of synchronize_rcu(), the instance that the inst pointer is
pointing to can be freed while the osnoise code is still referencing it.
That is, a rmdir on an instance first unregisters the tracer. When the
unregister finishes, the rmdir expects that the tracer is finished with
the instance that it is using. By putting back the synchronize_rcu()
in osnoise_unregister_instance() the unregistering of osnoise will now
return when all the users of the instance have finished.
- Remove an unused setting of "ret" in tracing_set_tracer()
- Fix ring_buffer_read_page() copying events
The commit that changed ring_buffer_read_page() to show dropped events
from the buffer itself, split the "commit" variable between the commit
value (with flags) and "size" that holds the size of the sub-buffer.
A cut and paste error changed the test of the reading from checking the
size of the buffer to the size of the event causing reads to only read one
event at a time.
- Make tracepoint_printk a static variable
When the tracing sysctl knobs were move from sysctl.c to trace.c, the
variable tracepoint_printk no longer needed to be global. Make it static.
- Fix some typos
- Fix NULL pointer dereference in func_set_flag()
The flags update of the function tracer first checks if the value of the
flag is the same and exits if they are, and then it checks if the current
tracer is the function tracer and exits if it isn't. The problem is that
these checks need to be in a reversed order, as if the tracer isn't the
function tracer, then the flag being checked may not exist. Reverse the
order of these checks.
- Fix ufs core trace events to not dereference a pointer in TP_printk()
The TP_printk() part of the TRACE_EVENT() macro is called when the user
reads the "trace" file. This can be seconds, minutes, hours, days, weeks,
and even months after the data was recorded into the ring buffer. Thus,
saving a pointer to an object into the ring buffer and then dereferencing
it from TP_printk() can cause harm as the object the pointer is pointing
to may no longer exist.
Fix all the trace events in ufs core to save the device name in the ring
buffer instead of dereferencing the device descriptor from TP_printk().
- Prevent out-of-bound reads in glob matching of trace events
The filter logic of events allows simple glob logic to add wild cards to
filter on strings. But some events have fields that may not have a
terminating 'nul' character. This may cause the glob matching to go beyond
the string. Change the logic to always pass in the length of the field
that is being matched.
- Add no-rcu-check version of trace_##event##_enabled()
The trace_##event##_enabled() usually wraps trace events to do extra work
that is only needed when the trace event is enabled. But this can hide
events that are placed in locations where RCU is not watching, and can
make lockdep not see these bugs when the event is not enabled.
The trace_##event##_enabled() was updated to always test to make sure RCU
is watching to catch locations that may call events without RCU being
active.
This caused a false positive for the irq_disabled() and related events. As
that use trace_irq_disabled_enabled() to force RCU to be watching when the
event is enabled via the ct_irq_enter() function, calls the event, and
then calls ct_irq_exit() to put RCU back to its original state.
The trace_irq_disabled_enabled() should not trigger a warning when RCU is
not watching because the code within its block handles the case properly.
Make a __trace_##event##_enabled() version for this event to use that
doesn't check RCU is watching as it handles the case when it isn't.
- Fix use-after-free in user_event_mm_dup()
When the enabler is removed from the link list, it is freed immediately.
But it is protected via RCU and needs to be freed after an RCU
grace period. Use queue_rcu_work() so that the event_mutex can also
be taken as user_event_put() takes the mutex on the last reference
is released.
- Free type string in error path of parse_synth_field()
There's an error path in parse_synth_field() where the allocated type
string is not freed.
- Add selftest that tests deferred event teardown
- Fix leak in error path of trace_remote_alloc_buffer()
If page allocation fails, the desc->nr_cpus is not incremented for the
current CPU and the allocations done for it are not freed.
- Fix allocation length in trace_remote_alloc_buffer()
The logic to calculate the struct_len was doing a double count and setting
the value too large. Calculate the size upfront to fix the error and
simplify the logic.
- Fix sparse CPU masks in ring_buffer_desc()
If there are sparse CPUs (gaps in the numbering), the ring_buffer_desc()
will fail as it tests the CPU number against the number of CPUs that are
used.
-----BEGIN PGP SIGNATURE-----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=+//w
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Free field in error path of synthetic event parse
In __create_synth_event() the field was allocated but was not freed
in the error path
- Fix ring_buffer_event_length() on 8 byte aligned architectures
On architectures with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, the
ring_buffer_event_length() may return the wrong size. This is because
archs with that config set will always use the "big event meta
header" as that is 8 bytes keeping the payload 8 bytes aligned, even
when a 4 byte header could hold the size of the event
But ring_buffer_event_length() doesn't take this into account and
only subtracts 4 bytes for the meta header in the length when it
should have subtracted 8 bytes
- Have osnoise wait for a full rcu synchronization on unregister
osnoise_unregister_instance() used to call synchronize_rcu() before
freeing its copy of the instance but was switched to kfree_rcu(). The
osniose tracer has code that traverses the instances that it uses,
and inst is just a pointer to that instance. By using kfree_rcu()
instead of synchronize_rcu(), the instance that the inst pointer is
pointing to can be freed while the osnoise code is still referencing
it
That is, a rmdir on an instance first unregisters the tracer. When
the unregister finishes, the rmdir expects that the tracer is
finished with the instance that it is using. By putting back the
synchronize_rcu() in osnoise_unregister_instance() the unregistering
of osnoise will now return when all the users of the instance have
finished
- Remove an unused setting of "ret" in tracing_set_tracer()
- Fix ring_buffer_read_page() copying events
The commit that changed ring_buffer_read_page() to show dropped
events from the buffer itself, split the "commit" variable between
the commit value (with flags) and "size" that holds the size of the
sub-buffer. A cut and paste error changed the test of the reading
from checking the size of the buffer to the size of the event causing
reads to only read one event at a time
- Make tracepoint_printk a static variable
When the tracing sysctl knobs were move from sysctl.c to trace.c, the
variable tracepoint_printk no longer needed to be global. Make it
static
- Fix some typos
- Fix NULL pointer dereference in func_set_flag()
The flags update of the function tracer first checks if the value of
the flag is the same and exits if they are, and then it checks if the
current tracer is the function tracer and exits if it isn't. The
problem is that these checks need to be in a reversed order, as if
the tracer isn't the function tracer, then the flag being checked may
not exist. Reverse the order of these checks
- Fix ufs core trace events to not dereference a pointer in TP_printk()
The TP_printk() part of the TRACE_EVENT() macro is called when the
user reads the "trace" file. This can be seconds, minutes, hours,
days, weeks, and even months after the data was recorded into the
ring buffer. Thus, saving a pointer to an object into the ring buffer
and then dereferencing it from TP_printk() can cause harm as the
object the pointer is pointing to may no longer exist
Fix all the trace events in ufs core to save the device name in the
ring buffer instead of dereferencing the device descriptor from
TP_printk()
- Prevent out-of-bound reads in glob matching of trace events
The filter logic of events allows simple glob logic to add wild cards
to filter on strings. But some events have fields that may not have a
terminating 'nul' character. This may cause the glob matching to go
beyond the string. Change the logic to always pass in the length of
the field that is being matched
- Add no-rcu-check version of trace_##event##_enabled()
The trace_##event##_enabled() usually wraps trace events to do extra
work that is only needed when the trace event is enabled. But this
can hide events that are placed in locations where RCU is not
watching, and can make lockdep not see these bugs when the event is
not enabled
The trace_##event##_enabled() was updated to always test to make sure
RCU is watching to catch locations that may call events without RCU
being active
This caused a false positive for the irq_disabled() and related
events. As that use trace_irq_disabled_enabled() to force RCU to be
watching when the event is enabled via the ct_irq_enter() function,
calls the event, and then calls ct_irq_exit() to put RCU back to its
original state
The trace_irq_disabled_enabled() should not trigger a warning when
RCU is not watching because the code within its block handles the
case properly. Make a __trace_##event##_enabled() version for this
event to use that doesn't check RCU is watching as it handles the
case when it isn't
- Fix use-after-free in user_event_mm_dup()
When the enabler is removed from the link list, it is freed
immediately. But it is protected via RCU and needs to be freed after
an RCU grace period. Use queue_rcu_work() so that the event_mutex can
also be taken as user_event_put() takes the mutex on the last
reference is released
- Free type string in error path of parse_synth_field()
There's an error path in parse_synth_field() where the allocated type
string is not freed
- Add selftest that tests deferred event teardown
- Fix leak in error path of trace_remote_alloc_buffer()
If page allocation fails, the desc->nr_cpus is not incremented for
the current CPU and the allocations done for it are not freed
- Fix allocation length in trace_remote_alloc_buffer()
The logic to calculate the struct_len was doing a double count and
setting the value too large. Calculate the size upfront to fix the
error and simplify the logic
- Fix sparse CPU masks in ring_buffer_desc()
If there are sparse CPUs (gaps in the numbering), the
ring_buffer_desc() will fail as it tests the CPU number against the
number of CPUs that are used
* tag 'trace-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Allow sparse CPU masks in ring_buffer_desc()
tracing/remotes: Fix struct_len in trace_remote_alloc_buffer()
tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path
selftests/user_events: Wait for deferred event teardown after unregister
tracing/synthetic: Free type string on error path
tracing/user_events: Fix use-after-free in user_event_mm_dup()
tracing: Add a no-rcu-check version of trace_##event##_enabled()
tracing: Prevent out-of-bounds read in glob matching
ufs: core: tracing: Do not dereference pointers in TP_printk()
tracing: Fix NULL pointer dereference in func_set_flag()
samples: ftrace: Fix typos in benchmark comment
tracing: Make tracepoint_printk static as not exported
ring-buffer: Fix ring_buffer_read_page() copying only one event per page
tracing: Remove unused ret assignment in tracing_set_tracer()
tracing/osnoise: Call synchronize_rcu() when unregistering
ring-buffer: Fix event length with forced 8-byte alignment
tracing/synthetic: Free pending field on error path
