Replace the GDMA global interrupt setup code with the new GIC allocation
and release functions for managing interrupt contexts.
This changes the per-queue interrupt names in /proc/interrupts from
mana_q0, mana_q1, ... to mana_msi1, mana_msi2, ... to reflect the
MSI-X index rather than a zero-based queue number. The HWC interrupt
name (mana_hwc) is unchanged.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-5-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To allow Ethernet EQs to use dedicated or shared MSI-X vectors and RDMA
EQs to share the same MSI-X, introduce a GIC (GDMA IRQ Context) with
reference counting. This allows the driver to create an interrupt context
on an assigned or unassigned MSI-X vector and share it across multiple
EQ consumers.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-4-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When querying the device, adjust the max number of queues to allow
dedicated MSI-X vectors for each vPort. The per-vPort queue count is
clamped towards MANA_DEF_NUM_QUEUES but will not exceed the hardware
maximum reported by the device.
MSI-X sharing among vPorts is enabled when there are not enough MSI-X
vectors for dedicated allocation, or when the platform does not support
dynamic MSI-X allocation (in which case all vectors are pre-allocated
at probe time and sharing is always used). The msi_sharing flag is
reset at the top of mana_gd_query_max_resources() so it is recomputed
from current hardware state on each probe or resume cycle.
Clamp apc->max_queues to gc->max_num_queues_vport in mana_init_port()
so that on resume, if max_num_queues_vport has decreased due to fewer
MSI-X vectors, num_queues is reduced accordingly before EQ allocation.
A device reporting zero ports now results in a fatal probe error since
the per-vPort MSI-X math requires at least one port.
Rename mana_query_device_cfg() to mana_gd_query_device_cfg() as it is
used at GDMA device probe time for querying device capabilities.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-3-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To prepare for assigning vPorts to dedicated MSI-X vectors, remove EQ
sharing among the vPorts and create dedicated EQs for each vPort.
Move the EQ definition from struct mana_context to struct mana_port_context
and update related support functions. Export mana_create_eq() and
mana_destroy_eq() for use by the MANA RDMA driver.
RSS QPs now take a vport reference via pd->vport_use_count to ensure
EQs outlive all QP consumers. The vport must already be configured by
a raw QP before an RSS QP can be created. EQs are only destroyed when
the last QP (raw or RSS) on the PD releases its reference.
Restrict each vport to a single RSS QP. The hardware only supports one
steering configuration (indirection table / hash key) per vport, and
mana_disable_vport_rx() on QP destroy disables RX globally for the
vport. Previously, creating a second RSS QP would silently overwrite
the first QP's steering config and destroy would blackhole all traffic.
This is now explicitly rejected with -EBUSY. Existing applications
(DPDK being the primary RDMA consumer) always create one RSS QP per
vport, so no real-world flows are affected.
Reject cross-port PD sharing for both raw and RSS QPs. Since EQs and
vport configuration are per-port, a PD is bound to the port used by
its first raw QP. Subsequent QPs on the same PD must use the same
port or the creation fails with -EINVAL. Previously this was silently
broken: with shared EQs it appeared to work, but with per-vPort EQs
a cross-port PD would cause wrong-port EQ teardown and corruption.
DPDK creates one PD per port so no existing flows are affected.
Serialize mana_set_channels() and the async per-port queue reset
handler against RDMA vport configuration to prevent RDMA from claiming
the vport during the detach/attach window. A channel_changing flag is
set under apc->vport_mutex before detach and checked by
mana_cfg_vport() when called from the RDMA path, blocking RDMA from
grabbing the vport during the entire window. When the port is down
and RDMA already holds the vport, the channel change is rejected with
-EBUSY.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-2-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix reset ordering on per-task destruction
Reset the task before dropping the slot instead of after, which was
causing out-of-bound memory accesses.
- Fix HA monitor synchronization and cleanup
Ensure synchronous cleanup for HA monitors by running timer callbacks
in RCU read-side critical sections and using synchronize_rcu() during
destruction.
- Avoid armed timers after tasks exit
Add automatic cleanup for per-task HA monitors to prevent timers from
firing after task exit.
- Fix memory ordering for DA/HA monitors
Fix race conditions during monitor start by using release-acquire
semantics for the monitoring flag.
- Fix initialization for DA/HA monitors
Ensure monitors are not initialized relying on potentially corrupted
state like the monitoring flag, that is not reset by all monitors type
and may have an unknown state in monitors reusing the storage
(per-task).
- Fix memory safety in per-task and per-object monitors
Prevent use-after-free and out-of-bounds access by synchronizing with
in-flight tracepoint probes using tracepoint_synchronize_unregister()
before freeing monitor storage or releasing task slots.
- Adjust monitors for preemptible tracepoints
Fix monitors that relied on tracepoints disabling preemption.
Explicitly disable task migration when per-CPU monitors handle events
to avoid accessing the wrong state and update the opid monitor logic.
- Fix incorrect __user specifier usage
Remove __user from a non-pointer variable in the extract_params()
helper.
- Fix bugs in the rv tool
Ensure strings are NUL-terminated, fix substring matching in monitor
searches, and improve cleanup and exit status handling.
- Fix several bugs in rvgen
Fix LTL literal stringification, subparsers' options handling, and
suffix stripping in dot2k.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaiiJqhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlWSAQCZ6/v0Gyb+m7md9V65NWtAA3QKuJWU
WvoQIjPLx+zCoAEAmfyhRxWGMKgBYn3yZfBU5nb1CBMcMStJ5Pp8b+uwNAs=
=VjFc
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-v7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fixes from Steven Rostedt:
- Fix reset ordering on per-task destruction
Reset the task before dropping the slot instead of after, which was
causing out-of-bound memory accesses.
- Fix HA monitor synchronization and cleanup
Ensure synchronous cleanup for HA monitors by running timer callbacks
in RCU read-side critical sections and using synchronize_rcu() during
destruction.
- Avoid armed timers after tasks exit
Add automatic cleanup for per-task HA monitors to prevent timers from
firing after task exit.
- Fix memory ordering for DA/HA monitors
Fix race conditions during monitor start by using release-acquire
semantics for the monitoring flag.
- Fix initialization for DA/HA monitors
Ensure monitors are not initialized relying on potentially corrupted
state like the monitoring flag, that is not reset by all monitors
type and may have an unknown state in monitors reusing the storage
(per-task).
- Fix memory safety in per-task and per-object monitors
Prevent use-after-free and out-of-bounds access by synchronizing with
in-flight tracepoint probes using tracepoint_synchronize_unregister()
before freeing monitor storage or releasing task slots.
- Adjust monitors for preemptible tracepoints
Fix monitors that relied on tracepoints disabling preemption.
Explicitly disable task migration when per-CPU monitors handle events
to avoid accessing the wrong state and update the opid monitor logic.
- Fix incorrect __user specifier usage
Remove __user from a non-pointer variable in the extract_params()
helper.
- Fix bugs in the rv tool
Ensure strings are NUL-terminated, fix substring matching in monitor
searches, and improve cleanup and exit status handling.
- Fix several bugs in rvgen
Fix LTL literal stringification, subparsers' options handling, and
suffix stripping in dot2k.
* tag 'trace-rv-v7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
verification/rvgen: Fix ltl2k writing True as a literal
verification/rvgen: Fix options shared among commands
verification/rvgen: Fix suffix strip in dot2k
tools/rv: Fix cleanup after failed trace setup
tools/rv: Fix substring match when listing container monitors
tools/rv: Fix substring match bug in monitor name search
tools/rv: Ensure monitor name and desc are NUL-terminated
rv: Use 0 to check preemption enabled in opid
rv: Prevent task migration while handling per-CPU events
rv: Ensure synchronous cleanup for HA monitors
rv: Add automatic cleanup handlers for per-task HA monitors
rv: Do not rely on clean monitor when initialising HA
rv: Fix monitor start ordering and memory ordering for monitoring flag
rv: Ensure all pending probes terminate on per-obj monitor destroy
rv: Prevent in-flight per-task handlers from using invalid slots
rv: Reset per-task DA monitors before releasing the slot
rv: Fix __user specifier usage in extract_params()
While NET_NCSI not enabled, ncsi_stop_dev() is not inline
and call with it, casue compile waring:
linux/include/net/ncsi.h:63:13: warning: 'ncsi_stop_dev'
defined but not used [-Wunused-function]
static void ncsi_stop_dev(struct ncsi_dev *nd)
Setting ncsi_stop_dev() to inline like other function to
remove compile warnings.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Link: https://patch.msgid.link/20260605033607.37630-1-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix multi-character short option parsing
Fix regression in parsing of multiple-character short options (e.g.
-p100 /= -p 100/, -un /= -u -n/) caused by getopt_long() internal state
corruption after a refactoring.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaiiILRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvKKAP9peFJI0pJhGz3xkBdtDjNeTw8k93QT
aTutUb4tJUD92wD/QJ0FwiOyzOCqkBHAO2x2R4elTlGm4Wgz9cZXjzHWaw8=
=0CcC
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull RTLA fix from Steven Rostedt:
- Fix multi-character short option parsing
Fix regression in parsing of multiple-character short options
(eg -p100 /= -p 100/, -un /= -u -n/) caused by getopt_long()
internal state corruption after a refactoring.
* tag 'trace-tools-v7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Fix parsing of multi-character short options
Eric Biggers says:
====================
Consolidate FCrypt and PCBC code into net/rxrpc/
The FCrypt "block cipher" and the PCBC mode of operation are obsolete
and insecure. Since their only user is net/rxrpc/, they belong there,
not in the crypto API.
Therefore, this series removes these algorithms from the crypto API and
replaces them with local implementations in net/rxrpc/.
The local implementations are simpler too, as they avoid the crypto API
boilerplate.
I don't know how to test all the code in net/rxrpc/, but everything
should still work. I added a KUnit test for the crypto functions.
====================
Link: https://patch.msgid.link/20260522050740.84561-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of PCBC mode (Propagating Cipher Block Chaining mode) was
net/rxrpc/rxkad.c, which now uses local code instead.
While PCBC was an interesting cryptographic experiment, it has largely
been relegated to the history books and academic exercises. It is
non-parallelizable (i.e., very slow) and doesn't actually achieve the
integrity properties it was apparently intended to achieve.
Remove support for it from the crypto API.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the insecure FCrypt block cipher from the crypto API. Its only
user was net/rxrpc/, but now net/rxrpc/ implements it locally. The
crypto API implementation is no longer needed.
For some additional context: FCrypt was designed in 1988 and is
essentially a weakened version of DES. It has the same 56-bit key size
as DES, which is easily brute forced. Moreover, it's cryptographically
weak and doesn't even provide the intended 56-bit security level. Its
author considers it to be a mistake, as well
(https://lists.openafs.org/pipermail/openafs-devel/2000-December/005320.html).
But fortunately this 1980s-era homebrew block cipher was never adopted
outside of net/rxrpc/. So its code can just be kept there.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the use of "pcbc(des)" in rxkad_decrypt_ticket() is the only
remaining user of the crypto API "pcbc" template, just implement
DES-PCBC by locally implementing PCBC mode on top of the DES library.
Note that only the decryption direction is needed.
This will allow support for the obsolete PCBC mode to be removed from
the crypto API.
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-4-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the local implementation of FCrypt-PCBC instead of the crypto API
one. This will allow the crypto API one to be removed. It also
simplifies the code quite a bit.
The local FCrypt-PCBC implementation is also significantly faster than
the crypto API one, since the crypto API one had a lot of overhead. For
example, benchmarking on an x86_64 CPU, I see that FCrypt-PCBC
decryption throughput improved from 83 MB/s to 157 MB/s.
(Meanwhile, AES-256-GCM decryption is 8064 MB/s on the same CPU.
Clearly, anyone looking for good performance, or anything that is
actually secure for that matter, needs to look elsewhere anyway.)
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a local implementation of FCrypt-PCBC encryption and decryption.
This will be used instead of the crypto API one, allowing the crypto API
one to be removed. It will also simplify rxkad.c quite a bit.
A KUnit test is included. The FCrypt-PCBC test vectors are borrowed
from the existing ones in crypto/testmgr.h. Note that this adds the
first KUnit test for net/rxrpc/, which previously had no KUnit tests.
The FCrypt code is based on crypto/fcrypt.c, but I simplified it a bit.
The PCBC part is straightforward and I just wrote it from scratch.
Tested with:
kunit.py run --kunitconfig net/rxrpc/
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable and disable the SPU clock in fsi_hw_startup() and
fsi_hw_shutdown() to ensure the clock is active while the
driver accesses hardware registers.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260609113836.45079-12-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add fsi_clk_prepare() and fsi_clk_unprepare() helpers and call them
from fsi_dai_startup() and fsi_dai_shutdown().
This ensures clk_prepare() and clk_unprepare() are executed from
sleepable contexts and keeps clocks prepared only while audio streams
are active.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260609113836.45079-11-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FSI register accesses on the r8a7740 require the SPU bus clock to be
enabled. Add support for acquiring and managing the SPU clock via the
device tree to ensure proper register access.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260609113836.45079-10-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move fsi_clk_init() from set_fmt() to the probe path.
This ensures that clock resources are acquired only once during device
initialization, instead of being looked up repeatedly whenever set_fmt()
is called.
Together with the previous conversion to devm_clk_get_optional(), the
driver can now probe successfully even when optional clocks are absent.
The set_rate() callbacks continue to validate that all required clocks
are available before applying hardware-specific configuration.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260609113836.45079-9-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The xck, ick, and div clocks are optional. Switch from devm_clk_get()
to devm_clk_get_optional() to correctly handle cases where these clocks
are missing.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260609113836.45079-8-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In-flight IRQs may still be running when the SPU clock is disabled,
leading to register access after shutdown and causing system hangs.
Fix this to use fsi_stream_is_working() when handling in-flight IRQ
handlers. If no streams are active, the handler now returns immediately
to prevent hardware access.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260609113836.45079-6-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move fsi_stream_is_working() before fsi_count_fifo_err().
This prepares for a subsequent patch that needs to check stream status
when handling in-flight IRQ handlers. No functional changwqes intended.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260609113836.45079-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call fsi_stream_stop() before fsi_hw_shutdown(). This matches the existing
order in the suspend path.
This change ensures all register accesses during stream shutdown are fully
completed before disabling the clocks.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260609113836.45079-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FSI on r8a7740 requires the SPU bus/bridge clock to be enabled before
accessing its registers. Without this clock, any register access leads to
a system hang as the FSI block sits behind the SPU bus.
Update the binding to support multiple clocks to properly describe the
hardware clock tree, including:
- SPU bus/bridge clock (spu) for register access.
- CPG DIV6 clocks (icka/b) as functional clock.
- FSI dividers (diva/b) for audio clock generation.
- External clock inputs (xcka/b) provided by the board.
The hardware supports several valid clock configurations. For example,
when both FSIA and FSIB operate as slaves, only the fck and spu clocks
are required. When a port operates as a master, it can use either an
internal clock source (ickx + divx) or an external clock source
(ickx + xckx). Therefore, while fck and spu are mandatory on r8a7740,
the remaining clocks (icka/b, diva/b and xcka/b) are optional and depend
on the selected master/slave configuration and clock source.
Both sh73a0 and r8a7740 define the SPU DIV6 clock control register at
0xe6150084. The binding therefore documents the clocks supported by the
FSI driver for these variants.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609113836.45079-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
scripts/kconfig/tests/no_write_if_dep_unmet/__init__.py contains a typo
"COFIG_" for "CONFIG_". Fix it.
Discovered while searching for typos in CONFIG_* variable references.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260609021712.7965-1-enelsonmoore@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Val Packett <val@packett.cool> says:
The Awinic smart speaker/amp drivers were merged in a very
"downstream-brained" state, where configuration was only really
determined by the binary "firmware" (register list) file instead
of properly participating in the ASoC system. Let's start
untangling this mess. This series makes aw88261 actually usable
on devices like fairphone-fp5, motorola-dubai and xiaomi-pipa.
Link: https://patch.msgid.link/20260529200550.529719-1-val@packett.cool
- Invert the value to match userspace expectations (in the hardware,
positive numbers represent negative dB attenuation)
- Provide TLV metadata for the dB scale (and divide the raw values by 2
as the excessive precision used by HW is not representable in TLV)
- Do not unnecessarily reset the volume while switching profiles
- Simplify aw88261_dev_set_volume using regmap_update_bits
- Do not add the initial volume from the profile to the requested volume
as that would throw off the dB mapping (if a lower max limit is
desired, it can be set in the UCM profile in userspace)
With this change, it's actually possible to use this hardware volume
control as PlaybackVolume in an ALSA UCM profile.
Fixes: 028a2ae256 ("ASoC: codecs: Add aw88261 amplifier driver")
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260529200550.529719-8-val@packett.cool
Signed-off-by: Mark Brown <broonie@kernel.org>
The boost-related register fields used in aw88261_reg_force_set use the
exact same definitions as the rest of the fields, where the mask must be
inverted when passing it to regmap_update_bits, but they weren't
inverted here.
Fixes: 028a2ae256 ("ASoC: codecs: Add aw88261 amplifier driver")
Signed-off-by: Val Packett <val@packett.cool>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260529200550.529719-7-val@packett.cool
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec drivers are not supposed to do anything like this. The result was
that the first second or so of playback was essentially inaudible, and
very short alert sounds could be missed entirely. Let's not do this.
Signed-off-by: Val Packett <val@packett.cool>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260529200550.529719-6-val@packett.cool
Signed-off-by: Mark Brown <broonie@kernel.org>
This "feature" was copied from downstream, but it does not belong in
the kernel at all. Remove it to simplify the driver.
Signed-off-by: Val Packett <val@packett.cool>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260529200550.529719-5-val@packett.cool
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver would create a wall of logspam during initialization due to
e.g. the PLL not being ready while waiting for it to stabilize. Change
intermediate dev_err() calls to dev_dbg() to reduce the noise.
While here, log the detected chip ID when that check fails.
Signed-off-by: Val Packett <val@packett.cool>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260529200550.529719-4-val@packett.cool
Signed-off-by: Mark Brown <broonie@kernel.org>
This amp supports TDM mode, so implement the set_tdm_slot operation to
let the SoC driver configure the TDM slot number, width, and masks.
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260529200550.529719-3-val@packett.cool
Signed-off-by: Mark Brown <broonie@kernel.org>
The aw88261 driver only worked with 32-bit 48kHz streams so far due to
the lack of a proper PLL initialization sequence. Fix by selecting all
the necessary PLL settings based on what was passed to us by the
hw_params/set_fmt ops. This replaces the strange downstream routine
that tries two divider modes in sequence.
Fixes: 028a2ae256 ("ASoC: codecs: Add aw88261 amplifier driver")
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcm6490-fairphone-fp5
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260529200550.529719-2-val@packett.cool
Signed-off-by: Mark Brown <broonie@kernel.org>
On SMP systems, dw_spi_handle_err() can be called from the SPI core
kthread while the IRQ handler is still accessing the FIFO on another
CPU. Resetting the chip via dw_spi_reset_chip() during an active FIFO
read/write causes a bus error.
Fix this by calling disable_irq() before the chip reset, which masks
the IRQ and waits for any in-flight handler to complete via
synchronize_irq(). This ensures no handler is accessing the FIFO when
the reset occurs.
Signed-off-by: Peng Yang <pyangyyd@amazon.com>
Suggested-by: Jonathan Chocron <jonnyc@amazon.com>
Link: https://patch.msgid.link/20260608095849.3446-1-pyangyyd@amazon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even when it
returns an error. meson_spifc_remove() uses it to resume the controller
before disabling runtime PM, but never drops the usage counter again.
Balance the get with pm_runtime_put_noidle() after disabling runtime PM,
matching the teardown pattern used by other SPI controller drivers.
Found by static analysis. I do not have hardware to test this.
Fixes: c3e4bc5434 ("spi: meson: Add support for Amlogic Meson SPIFC")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Link: https://patch.msgid.link/20260609052647.5-1-ruoyuw560@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When dynamically creating software nodes and properties for subsequent
use with software_node_register() current implementation of
PROPERTY_ENTRY_REF() is not suitable because it creates a temporary
instance of struct software_node_ref_args on stack which will later
disappear, and software_node_register() only does shallow copy of
properties.
Fix this by allowing to pass address of reference arguments structure
directly into PROPERTY_ENTRY_REF(), so that caller can manage lifetime
of the object properly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/aiTo4dvKu8pyimHA@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The first device on a PCI root bus determines whether the host bridge is
whitelisted for P2PDMA. All Intel Xeon chips since Ice Lake (ICX, 2021)
expose a device with ID 0x09a2 as first device. It is loosely associated
with the IOMMU. All these Xeon chips support P2PDMA, so since the addition
of the device with commit feaea1fe8b ("PCI/P2PDMA: Add Intel 3rd Gen
Intel Xeon Scalable Processors to whitelist"), P2PDMA has been allowed on
all new Xeons without the need to amend the whitelist:
Xeons with Performance Cores:
Sapphire Rapids (SPR, 2023)
Emerald Rapids (EMR, 2023)
Granite Rapids (GNR, 2024)
Diamond Rapids (DMR, 2026)
Xeons with Efficiency Cores:
Sierra Forest (SRF, 2024)
Clearwater Forest (CWF, 2026)
However these Xeons also expose accelerators as first device on a root bus
of its own:
QuickAssist Technology (QAT, crypto & compression accelerator)
Data Streaming Accelerator (DSA, dma engine)
In-Memory Analytics Accelerator (IAA, compression accelerator)
Whitelist them for P2PDMA as well. Move their Device ID macros from the
accelerator drivers to <linux/pci_ids.h> for reuse by P2PDMA code.
Unfortunately the Device IDs vary across Xeon generations as additional
features were added to the accelerators. This currently necessitates an
amendment for each new Xeon chip.
For future chips, this need shall be avoided by an ongoing effort to extend
ACPI HMAT with PCIe P2PDMA characteristics (latency, bandwidth, ordering
constraints). The PCI core will be able look up in this BIOS-provided ACPI
table whether P2PDMA is supported, instead of relying on a whitelist that
needs to be amended continuously.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/6aac4922b5fe7070b11874427a9285e42ddd05a4.1780585518.git.lukas@wunner.de
nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset
into the per-command inline scatterlist. The bounds check admits any
offset with off + len <= inline_data_size, but the mapping still assumes
the data begins in the first inline page:
sg->offset = off;
sg->length = min_t(int, len, PAGE_SIZE - off);
When a port is configured with inline_data_size > PAGE_SIZE (settable up
to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size]
makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and
the block backend reads far past the first inline page. num_pages(len)
also ignores the offset, so an in-bounds offset whose [off, off+len)
span crosses a page boundary under-counts the scatterlist.
Map the offset properly: split it into a page index and an in-page
offset, start the scatterlist at that page, and size the page count from
page_off + len. Because the request scatterlist may now start at
inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL
identity test in nvmet_rdma_release_rsp() to a range test; otherwise the
persistent inline scatterlist is mistaken for an allocated one and
nvmet_req_free_sgls() frees an inline page (and warns in
free_large_kmalloc()).
Fixes: 0d5ee2b2ab ("nvmet-rdma: support max(16KB, PAGE_SIZE) inline data")
Cc: stable@vger.kernel.org
Suggested-by: Keith Busch <kbusch@kernel.org>
Reported-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add the definitions for the regulators in PM8019 to allow controlling them
through the RPM firmware. Reading the TYPE/SUBTYPE registers using SPMI
reveals that PM8019 uses a mixture of regulators from PMA8084 (hfsmps,
pldo) and PM8916 (nldo).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608-rpm-smd-regulator-pm8019-v1-2-c671388b9ea5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous union.
While touching these arrays unify spacing and usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/3fcd432a505bb1bb7f8ef0fba9162243200b3347.1780606153.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add suspend/resume support to the rzv2h-rspi driver by implementing
suspend and resume callbacks that delegate to spi_controller_suspend()
and spi_controller_resume() respectively.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260608202509.3651345-1-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TPM TIS SPI probe fails with:
tpm_tis_spi: probe of spi11.0 failed with error -110
TPM TIS SPI sets cs_change=1 on single-transfer messages to keep CS
asserted across the header, wait-state, and data phases of a transaction.
CS deassertion between these phases violates the TCG SPI flow control
specification.
This bug was introduced by commit b99181cdf9 ("spi-geni-qcom: remove
manual CS control"), which replaced manual CS control with automatic CS
control via the FRAGMENTATION bit. The FRAGMENTATION bit controls CS
behavior after a transfer: when set to 1, CS remains asserted; when
cleared to 0, CS is deasserted.
The commit correctly sets FRAGMENTATION for non-last transfers with
cs_change=0 to keep CS asserted between chained transfers, but misses the
case where cs_change=1 is set on the last transfer. When cs_change=1 on
the last transfer, the client requests CS to remain asserted after the
message completes, so FRAGMENTATION must be set to 1 in this case as well.
Fix setup_se_xfer() to set FRAGMENTATION when cs_change=1 on the last
transfer.
Also fix the same missing case in setup_gsi_xfer() and correct it to
write 1 instead of the raw bitmask FRAGMENTATION (value 4) to
peripheral.fragmentation. This field is a 1-bit boolean consumed by
gpi_create_spi_tre() via u32_encode_bits(..., TRE_SPI_GO_FRAG). Writing 4
to a 1-bit field causes u32_encode_bits() to mask it to 0, silently
disabling the FRAGMENTATION bit in the GPI TRE regardless of the
cs_change logic.
Fixes: b99181cdf9 ("spi-geni-qcom: remove manual CS control")
Cc: stable@vger.kernel.org
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609-fix-spi-fragmentation-bit-logic-v2-1-e18efc255563@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The INA238 family supports eight conversion time steps from 50 us to
4120 us (SQ52206: 66 us to 8230 us). At the millisecond granularity of
update_interval, the four shortest steps (50, 84, 150, 280 us) all
round to the same value and cannot be individually selected.
Add support for the generic update_interval_us attribute, which reports
and programs the same ADC cycle time as update_interval but in
microseconds, giving userspace full access to all conversion time steps.
Both attributes reflect the total cycle time including the active
averaging count: the reported value is the raw conversion time
multiplied by the number of averaged samples, and writes apply the
inverse mapping.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-3-016b55567950@advastore.com
[groeck: Fixed some multi-line alignment issues]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some hardware monitoring chips support update intervals below one
millisecond. The existing update_interval attribute uses millisecond
granularity, which causes sub-millisecond steps to round to the same
value and become inaccessible from userspace.
Introduce update_interval_us, a companion chip-level attribute that
expresses the same update interval in microseconds. Drivers
implementing this attribute should also implement update_interval for
compatibility with millisecond-based userspace interfaces.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-2-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Expose INA238 ADC averaging count (AVG) and conversion timing
(VBUSCT/VSHCT/VTCT) through chip-level hwmon attributes:
chip/samples
chip/update_interval
Use per-chip conversion-time lookup tables so the same helpers work
for INA228/INA237/INA238/INA700/INA780 and SQ52206. Cache ADC_CONFIG
in driver data and update it on writes to avoid extra register reads
during read-modify-write updates.
Report update_interval in milliseconds as required by the hwmon ABI.
Compute it from raw ADC cycle time multiplied by the active averaging
count, and apply the inverse mapping on writes so programmed conversion
time tracks the selected sample count.
Clamp user-provided update_interval before unit scaling to prevent
overflow in arithmetic conversions.
Also combine chip attributes in HWMON_CHANNEL_INFO using a bitwise OR
for a single logical chip channel.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-1-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or
sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state
across transport teardown, pinning svc_xprt references and
blocking svc_rdma_free().
The close path sets XPT_CLOSE before invoking xpo_detach and both
wait_event predicates include an XPT_CLOSE term, but the
predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has
no completion-driven wake path; it is advanced solely by the
chained ticket handoff inside svc_rdma_sq_wait() itself. Without
an explicit wake at close, parked threads never observe
XPT_CLOSE, hold their svc_xprt_get reference forever, and
svc_rdma_free() blocks on xpt_ref dropping to zero.
Two close entry points reach this transport. Local teardown runs
svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() ->
xpo_detach() on a worker thread. A remote disconnect arrives at
svc_rdma_cma_handler(), which calls svc_xprt_deferred_close():
that sets XPT_CLOSE and enqueues the transport but does not
access either RDMA waitqueue, so a worker already parked in
svc_rdma_sq_wait() never re-evaluates its predicate. With every
worker parked on this transport, no thread is available to run
the local teardown either, and the wake site there is
unreachable.
Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper
that calls svc_xprt_deferred_close() and then wakes both
sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers
that called svc_xprt_deferred_close() directly:
svc_rdma_cma_handler(), qp_event_handler(),
svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop
path, the rw completion error paths, and the recvfrom flush and
read-list error paths.
Wake both waitqueues from svc_rdma_detach() as well. The
synchronous svc_xprt_close() path (backchannel ENOTCONN, device
removal via svc_rdma_xprt_done) reaches detach without flowing
through svc_xprt_deferred_close() and therefore does not invoke
the new helper.
Fixes: ccc89b9d1e ("svcrdma: Add fair queuing for Send Queue access")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
[ cel: add svc_rdma_xprt_deferred_close() to complete the fix ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to
detect deferred writeback errors, but neither rotates the server's write
verifier (nn->writeverf) when this check fails. Every other
durable-storage-failure path in these functions calls
commit_reset_write_verifier() before returning an error.
The missing rotation means clients holding UNSTABLE write data under the
current verifier will COMMIT, receive the unchanged verifier back, and
conclude their data is durable — silently dropping data that failed
writeback. This violates the UNSTABLE+COMMIT durability contract
(RFC 1813 §3.3.7, RFC 8881 §18.32).
Add commit_reset_write_verifier() calls at both filemap_check_wb_err()
error sites, matching the pattern used by adjacent error paths in the
same functions. The helper already filters -EAGAIN and -ESTALE
internally, so the calls are unconditionally safe.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 555dbf1a9a ("nfsd: Replace use of rwsem with errseq_t")
Cc: stable@vger.kernel.org
Assisted-by: kres:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
