The chandef now includes a flag denoting the use of a 2MHz primary
channel for S1G interfaces, include this when sending the chandef.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20251125025927.245280-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The FILS status codes are set to 108/109, but the IEEE 802.11-2020
spec defines them as 112/113. Update the enum so it matches the
specification and keeps the kernel consistent with standard values.
Fixes: a3caf7440d ("cfg80211: Add support for FILS shared key authentication offload")
Signed-off-by: Ria Thomas <ria.thomas@morsemicro.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20251124125637.3936154-1-ria.thomas@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- relicense to BSD-3-Clause-Clear
- fixes
- support WED on devices which exceed 32-bit DMA
- airoha NPU support
- mt7925 regd improvements
- more mt7996 MLO work
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - http://gpgtools.org
iF0EABECAB0WIQR10Rp9kadxD0kAQu/XfRQdAqdu9QUCaSRorgAKCRDXfRQdAqdu
9X+NAKCQZC5gtZELHdvSJNAB5MwOJP5H1QCgvC+LUxf0etHH3ukChZm0WOen/S0=
=DXR8
-----END PGP SIGNATURE-----
Merge tag 'mt76-next-2025-11-24' of https://github.com/nbd168/wireless
Felix Fietkau says:
===================
mt76 patches for 6.19
- relicense to BSD-3-Clause-Clear
- fixes
- support WED on devices which exceed 32-bit DMA
- airoha NPU support
- mt7925 regd improvements
- more mt7996 MLO work
===================
Link: https://patch.msgid.link/6b6d1033-dddf-4cc9-b240-93da7f8b8773@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the
subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function
returns an error without freeing sskb, leading to a memory leak.
Fix this by calling dev_kfree_skb() on sskb in the error handling path
to ensure it is properly released.
Fixes: 99c457d902 ("mt76: mt7615: move mt7615_mcu_set_bmc to mt7615_mcu_ops")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251113062415.103611-1-zilin@seu.edu.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set the MT76_STATE_MCU_RUNNING bit only after mt7921_load_clc()
has successfully completed. Previously, the MCU_RUNNING state
was set before loading CLC, which could cause conflict between
chip mcu_init retry and mac_reset flow, result in chip init fail
and chip abnormal status. By moving the state set after CLC load,
firmware initialization becomes robust and resolves init fail issue.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: druth@chromium.org
Link: https://patch.msgid.link/19ec8e4465142e774f17801025accd0ae2214092.1763465933.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
On systems I have with mt7925 cards I've been noticing a blank line in my
kernel logs. IE:
```
[ 17.294105] mt7925e 0000:c3:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250721232852a
[ 17.314233] r8169 0000:c4:00.0 enp196s0f0: Link is Down
```
This is because the build_date from the header has a newline character
as does the dev_info() print. As the firmware isn't guaranteed to always
have a newline but the print is, copy the firmware build date to a
temporary variable and strip any whitespace from it before showing it in
the logs.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251120155829.3494747-1-superm1@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not take into account offchannel links for deflink accounting.
Fixes: a3316d2fc6 ("wifi: mt76: mt7996: set vif default link_id adding/removing vif links")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-4-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move mt76_abort_scan routine out of mt76_reset_device() in order to
avoid a possible deadlock since mt76_reset_device routine is running
with mt76 mutex help and mt76_abort_scan_complete() can grab mt76 mutex
in some cases.
Fixes: b36d556102 ("wifi: mt76: abort scan/roc on hw restart")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-3-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move mt7996_update_beacons routine inside mt76 mutex critical section
in mt7996_mac_reset_work() in order to run mt7996_vif_conf_link() in
mt7996_mcu_add_beacon routine.
Fixes: f30906c55a ("wifi: mt76: mt7996: disable beacons when going offchannel")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-2-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Grab mt76 mutex in mt7996_mac_sta_event routine in order to rely on
mt76_dereference() utility macro.
Fixes: ecd72f9695 ("wifi: mt76: mt7996: Support MLO in mt7996_mac_sta_event()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-1-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set the 6GHz HE A-MPDU density from the hardware capability instead of a
hardcoded value, ensuring accurate capability reporting.
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251106092151.1061648-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The RRO EMI rings only need to be allocated when WED is not active.
This patch fixes command timeout issue for the setting of WED off and
RRO on.
Fixes: 3a29164425 ("wifi: mt76: mt7996: Add SW path for HW-RRO v3.1")
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-12-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch fixes the following key issues:
- Pass correct link BSS to mt7996_mcu_add_key(), and use HW beacon
protection mode for mt7990 chipset
- Do not do group key deletion for GTK and IGTK due to FW design, the
delete key command will delete all group keys of a link BSS
- For deleting BIGTK, FW adds a new flow, but the "sec->add" field
should be filled with "SET_KEY". Note that if BIGTK is not deleted, it
will cause beacon decryption issue when switching from an AP interface
to a station interface
Fixes: 0c45d52276 ("wifi: mt76: mt7996: fix setting beacon protection keys")
Co-developed-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-10-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix extender mode and MBSS issues caused by incorrect assignment of the
MLD group and remap indices.
Fixes: ed01c310ec ("wifi: mt76: mt7996: Fix mt7996_mcu_bss_mld_tlv routine")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-9-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Obtain the correct link ID and, if needed, switch to the corresponding
wcid before populating the TX descriptor and TX payload.
Rules for link id:
- For QoS data of MLD peers (excluding EAPOL), select the primary or
secondary wcid based on whether the TID is odd or even to meet FW/HW
requirements
- For other packets, use IEEE80211_TX_CTRL_MLO_LINK if specified
(such as multicast and broadcast packets)
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-8-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This ensures the upper layer uses the correct link ID during packet
processing.
Fixes: dd82a9e02c ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For an MLD peer, we only need to call the teardown command when removing
the last link, and there's no need to call mt7996_mcu_add_sta() for the
earlier links.
Fixes: c1d6dd5d03 ("wifi: mt76: mt7996: Add mt7996_mcu_teardown_mld_sta rouine")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-6-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix several fields in mt7996_mcu_bss_basic_tlv() that were not obtained
from the correct link. Without this patch, the MLD station interface
does not function properly.
Fixes: 34a41bfbcb ("wifi: mt76: mt7996: prepare mt7996_mcu_add_dev/bss_info for MLO support")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-5-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce mt7996_link_sta_add_debugfs() to extend fixed rate support for
MLO link station.
Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-4-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix the ibf_timeout field for mt7996, mt7992 and mt7990 chipsets. For
the mt7992, this value shall be set as 0xff, while the others shall be
set as 0x18.
Fixes: ad4c9a8a98 ("wifi: mt76: mt7996: add implicit beamforming support for mt7992")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For the SDO unified command, driver does not need to wait for ACK event so
do not mark MCU_CMD_ACK in command header.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since wiphy->available_antennas_tx now accumulates the chainmask of all
the radios of a wiphy, use phy->orig_antenna_mask to get the original
max nss for comparison.
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The implementation amounts to setting the driver flag
IEEE80211_VIF_SUPPORTS_CQM_RSSI, and then providing
mechanisms for continuously updating enough information
to be able to provide notifications to userspace when
RSSI drops below a certain threshold
Signed-off-by: Jack Kao <jack.kao@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251001012506.2168037-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
For more details see the Link tag below.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_percpu_wq because system_wq is going away as part of
a workqueue restructuring.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250922093243.140946-2-marco.crivellari@suse.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Passing a BSS conf pointer to mt76_connac2_mac_tx_rate_val() currently has
two inconsistencies.
When called from mt76_connac2_mac_write_txwi(), BSS conf is got by
dereferencing a vif pointer. A NULL vif isn't accounted for though the
function itself supposes it to be NULL and tries to handle this case in
previous checks. This looks like a cosmetic change since the drivers
calling the function (namely, mt7915 and mt7921) set WANT_MONITOR_VIF flag
so judging by info->control.vif initialization inside ieee80211_tx_*()
routines it can't actually come as NULL here.
The same holds for the BSS conf pointer handling inside
mt76_connac2_mac_tx_rate_val(). It is dereferenced before being checked
for NULL. The function supposes to handle the case so reorder the check
and dereference of the pointer. Again, this looks like a syntax issue
only.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Co-developed-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20251027111843.38975-2-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This reverts commit 55e95ce469.
mt792x drivers don't seem to support multi-radio devices yet. At least
they don't mess with `struct wiphy_radio` at the moment.
Packet capturing on monitor interface doesn't work after the blamed patch:
tcpdump -i wls6mon -n -vvv
Revert the NO_VIRTUAL_MONITOR feature for now to resolve the issue.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 55e95ce469 ("wifi: mt76: mt792x: improve monitor interface handling")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20251027111843.38975-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Update functions which copy to and from MMIO to load bytes as Little
Endian, and also support unaligned buffers.
PCI devices almost universally use Little Endian ordering for MMIO
registers, mt76 is no exception. PCI hardware that is designed to work
with Big Endian CPUs often (but not always) "helps" by transparently
byte-swapping MMIO reads and writes on the wire. If this is enabled
then it cannot be turned off for a single write. On hardware which does
not support this, writel() does the swap in software. When we are
transferring arbitrary bytes to MMIO space, we need them to arrive in
the same order they were in memory, so when the hardware swaps them
this is a problem. Rather than care about how our PCI host controller
works, we instead load bytes as Little Endian - so on a Big Endian
machine this will reverse them, then we use writel() which will put
them back in the right order again. This way we do not make it our
business whether the swapping is done in software or hardware.
Furthermore, inspection of the code shows that these functions are
often called with stack-allocated u8 arrays which have no alignment
guarantees so we now use (get|put)_unaligned_le32().
Fixes this issue:
mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
mt76x2e 0000:02:00.0: Build: 1
mt76x2e 0000:02:00.0: Build Time: 201607111443____
mt76x2e 0000:02:00.0: Firmware failed to start
mt76x2e 0000:02:00.0: probe with driver mt76x2e failed with error -145
Tested on:
SmartFiber XP8421-B (Big Endian MIPS 34Kc)
- MT7612 -> 5g / ap / psk2
- MT7603 -> 2g / sta / psk2
- MT7603 -> 2g / ap / psk2
TpLink Archer v1200v-v2 (Big Endian MIPS 34Kc)
- MT7613 -> 5g / ap / psk2
- MT7603 -> 2g / sta / psk2
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://patch.msgid.link/20251029184143.3991388-1-cjd@cjdns.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Implement 802.11d-based automatic regulatory domain switching to
dynamically determine the regulatory domain at runtime.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251031090352.1400079-6-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move the disable_clc module parameter to regd.c and introduce
mt7925_regd_clc_supported() to centralize CLC support checks.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251031090352.1400079-3-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251031175113.1453100-1-robh@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce Airoha NPU support to MT7996 driver. NPU is used to enable
traffic forward offloading between the MT76 NIC and the Airoha ethernet one
available on the Airoha EN7581 SoC using Netfilter Flowtable APIs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-mt76-npu-devel-v2-5-ddaa90901723@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add the NPU generic layer in mt76 module. NPU will be used to enable
traffic forward offloading between the MT76 NIC and the Airoha ethernet one
available on the Airoha EN7581 SoC using Netfilter Flowtable APIs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-mt76-npu-devel-v2-4-ddaa90901723@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is a preliminary patch to enable traffic forward offloading between
the MT76 NIC and the Airoha ethernet one via the Airoha NPU module
available on the Airoha EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-mt76-npu-devel-v2-1-ddaa90901723@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MediaTek has asked to switch from the ISC license to BSD-3-Clause-Clear,
in order to improve clarity and the legal integrity of the code.
The BSD-3-Clause license includes the "no endorsement" clause, which is
important for protecting the reputation of the original authors and
contributors by preventing unauthorized use of their names for endorsement
purposes.
This clause is absent in the BSD-2-Clause license, which is more permissive
but lacks this specific protection.
This change also cleans up the license of some Kconfig/Makefile files,
which were accidentally marked as GPL.
The GPL 2.0 remains in use on mt76x0, as well as two source files in mt7615
for which the license situation still needs to be clarified.
Link: https://patch.msgid.link/20251008104250.46292-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The extra copyright line for Ivo van Doorn and GPL license was only there
because of code that I had already removed before the initial upstream
submission of mt76.
Remove it and make this header file use ISC license like the rest of the
source files.
Link: https://patch.msgid.link/20251008104250.46292-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set GFP_DMA32 flag for page_pool buffers allocation since the hw relies
on 32-bit DMA addresses for WED offloading.
Tested-by: Daniel Pawlik <pawlik.dan@gmail.com>
Tested-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251008-wed-fixes-v1-2-8f7678583385@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The commit 22b980badc ("mt76: add functions for parsing rate power limits
from DT") introduced generic support for rates limits in the devicetree.
But the mt7915 supports beamforming and has another table for configuring
the backoff limits. These can be configured in the DT with the paths-*
properties. The path-*-bf are the ones relevant for beamforming and the
ones without -bf suffix for "traditional" path backoff.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Sven Eckelmann (Plasma Cloud) <se@simonwunderlich.de>
Link: https://patch.msgid.link/20251007-backoff-table-support-v3-3-fd6e2684988f@simonwunderlich.de
Signed-off-by: Felix Fietkau <nbd@nbd.name>
